"UEFI only" = "Install Clover to be used with UEFI motherboards only.";
"Install alternative booting PBR" = "Install alternative booting PBR with choice of boot with a key pressed.
File to boot = boot{keypressed}";
"Don't install any bootloader (boot0X, boot1X)" = "Don't install any bootloader (boot0X, boot1X).
Usefull for UEFI motherboards that don't need bootloader files.
Can also be use if you don't want to upgrade MBR or PBR sectors.";
"Clover legacy BIOS boot sectors" = "Clover EFI requires three essential files. (in simple terms)
boot0 (On the drive's MBR) responsible for loading boot1.
boot1 (On the partition's boot-sector) to finding boot2.
boot2 (On the partition's root directory) for loading CLOVERX64.efi, and kernel etc.";
"boot0af" = "Used for BIOS booting on BIOS motherboards.
boot0af (boot0 Active First) bootloader try to boot the active partition defined in MBR. If there is no active partition, it will try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature.
This choice will setup selected HFS/Fat32 partition to be active.";
"boot0ss" = "Used for BIOS booting on BIOS motherboards.
boot0ss (boot0 Signature Scanning) bootloader try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature. If no partition is found it will try to boot the active partition defined in MBR.
This bootloader is a good choice when you have Windows installed on the same disk because Windows wants to have its partition active.
This choice will not activate any partition in MBR.";
"boot6" = "Clover EFI 64-bits using SATA to access drives.";
"boot7" = "Clover EFI 64-bits BiosBlockIO";
"UEFI mandatory" = "UEFI mandatory";
"BIOS mandatory" = "BIOS mandatory";
"UEFI/Other" = "UEFI/Other";
"BIOS/Other" = "BIOS/Other";
"UEFI, but not from this installer" = "UEFI, but not from this installer";
"BIOS, but not from this installer" = "BIOS, but not from this installer";
"UEFI/FileSystem" = "UEFI, filesystem drivers";
"BIOS/FileSystem" = "BIOS, filesystem drivers";
"UEFI/HID" = "UEFI, Human Interface Devices";
"BIOS/HID" = "BIOS, Human Interface Devices";
"UEFI/FileVault2" = "UEFI, FileVault 2 drivers";
"BIOS/FileVault2" = "BIOS, FileVault 2 drivers";
"UEFI/MemoryFix" = "UEFI, memory fix drivers";
"ApfsDriverLoader.efi" = "Supports APFS filesystem driver from container for macOS 10.13 and newers";
"AppleImageCodec.efi" = "Decode PNG and BMP for FileVault2.";
"AppleImageLoader.efi" = "Secure AppleEfiFat binary driver with implementation of AppleLoadImage protocol with EfiBinary signature verification.";
"AppleKeyAggregator.efi" = "Support for boot UI dialog for FileVault2.";
"AppleKeyFeeder.efi" = "Support for PS/2 keyboard to use with FileVault 2.";
"AppleUISupport.efi" = "Set of protocols for support EfiLoginUi for FileVault.";
"AppleUITheme.efi" = "Create boot UI Themes support for FileVault2.";
"AptioInputFix.efi" = "Driver to fix input problems on UEFI firmware such as AMI Aptio.";
"AptioMemoryFix.efi" = "Preferred driver to fix Memory problems on UEFI firmware such as AMI Aptio. Do not use with other AptioFix together.";
"AudioDxe.efi" = "HDA driver to play Startup Sound during Clover boot.
Configure it via Startup sound output from Option menu, including:
Volume and Audio device (for supported IOAudio devices only).";
"FirmwareVolume.efi" = "Create FirmwareVolume with cursor images for FileVault2.";
"FSInject.efi" = "Provide injection of kernel extensions from Clover folder and allow to force load them from both /System/Library/Extensions and /Library/Extensions.";
"GrubEXFAT.efi" = "ExFAT filesystem driver from GRUB.";
"GrubISO9660.efi" = "ISO 9600 filesystem driver from GRUB.";
"GrubNTFS.efi" = "NTFS filesystem driver from GRUB.";
"GrubUDF.efi" = "UDF filesystem driver from GRUB.";
"SMCHelper.efi" = "Restore SMC keys left in NVRAM by FakeSMC.";
"XhciDxe.efi" = "USB 3.0 driver";
"AppleEvent.uefi" = "Create AppleEvent protocol for FileVault2.";
"CsmVideoDxe.efi" = "Video Driver for Clover GUI allowing to choose more resolutions. It is based on CSM module in UEFI BIOS and required CSM will be enabled.
Clover may not started with it and you may have wake problem in system. Use with precautions.";
"DataHubDxe.efi" = "This is DataHub protocol support mandatory for macOS.
Usually it is already present but sometime it may be missed. In this case you should see warning on screen.";
"EmuVariableUefi.efi" = "Workaround for store NVRAM variables for systems without UEFI hardware.
Mostly UEFI boot uses hardware NVRAM but in some rare cases this driver is needed. Use it only if you have a problem without it";
"EnglishDxe.efi" = "Support for UnicodeCollation protocol used by EFI Shell if it missed in UEFI.";
"Fat.efi" = "FAT filesystem driver.";
"HashServiceFix.efi" = "Fix Hash support if absent in native UEFI BIOS.";
"missing '<' at the beginning" = "missing '<' at the beginning";
"missing '>' at the end" = "missing '>' at the end";
"Your data contains illegal characters" = "Your data contains illegal characters";
"bytes count is odd, must be even" = "bytes count is odd, must be even";
"Keep editing" = "Keep editing";
"Duplicate key in the Dictionary!" = "Duplicate key in the Dictionary!";
"'%@' is already present in the Dictionary. Do you want to undo the editing or replace the existing key?" = "'%@' is already present in the Dictionary. Do you want to undo the editing or replace the existing key?";
"Invalid value detected!" = "Invalid value detected!";
"Your edit is not valid. Do you want to restore last valid value or keep editing?" = "Your edit is not valid. Do you want to restore last valid value or keep editing?";
