mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-12-04 13:23:26 +01:00
75 lines
2.6 KiB
Plaintext
75 lines
2.6 KiB
Plaintext
|
|
|||
|
Installation ( Use fdisk440 instead of fdisk )
|
|||
|
==============================================
|
|||
|
|
|||
|
Install fdisk440 first :
|
|||
|
------------------------
|
|||
|
|
|||
|
sudo cp fdisk440 /usr/sbin/fdisk440
|
|||
|
|
|||
|
fdisk440 - The Chameleon team modded the Apple's fdisk to only update the first 440 bytes in the MBR by adjusting MBR_CODE_SIZE to 0x1B8. The modded fdisk was renamed fdisk440 by Tam<61>s Kos<6F>rszky on 2010-02-19 to avoid confusion between Apple's fdisk and the Chameleon fdisk.
|
|||
|
This utility resolves Windows sleep problem.
|
|||
|
Chameleon modded sources with explanations is here
|
|||
|
http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj
|
|||
|
|
|||
|
Files Install :
|
|||
|
--------------------
|
|||
|
- Install clover to the partition's root directory:
|
|||
|
cp BOOT /
|
|||
|
cp -r EFI /
|
|||
|
sudo cp -v etc/* /etc/
|
|||
|
|
|||
|
Active partition installation
|
|||
|
-----------------------------
|
|||
|
|
|||
|
Suppose that your partition is on /dev/disk0s2 HFS+
|
|||
|
|
|||
|
- Install boot0ss to the MBR:
|
|||
|
sudo ./fdisk440 -f boot0ss -u -y /dev/rdisk0
|
|||
|
|
|||
|
- Install boot1h2 to the partition's bootsector:
|
|||
|
sudo dd if=boot1h2 of=/dev/rdisk0s2
|
|||
|
|
|||
|
Attention! My boot1h2 differs from Chameleon's one and will works with both Clover and Chameleon. You can't use Chameleon's boot1h with Clover-64.
|
|||
|
Use boot1h2 to boot a bootloaders boot1, boot2, boot3...
|
|||
|
|
|||
|
Note: dd can't change boot sector of the system partition. You should start from other partition
|
|||
|
|
|||
|
EFI Partition Install (FAT32) or to USB stick drive (disk1s1).
|
|||
|
---------------------------------
|
|||
|
|
|||
|
Suppose that your installation is on /dev/disk0s1
|
|||
|
|
|||
|
- Prepare EFI partition:
|
|||
|
sudo mkdir /Volumes/EFI
|
|||
|
sudo mount_msdos /dev/disk0s1 /Volumes/EFI/
|
|||
|
|
|||
|
- Install clover to the EFI partition's root directory:
|
|||
|
cp boot /Volumes/EFI/
|
|||
|
sudo umount -f /Volumes/EFI/
|
|||
|
|
|||
|
- Install boot0ss to the MBR:
|
|||
|
sudo fdisk440 -f boot0ss -u -y /dev/rdisk0
|
|||
|
|
|||
|
- Install boot1f32alt to the partition's bootsector:
|
|||
|
|
|||
|
sudo fdisk440 -f boot0ss -u -y /dev/rdisk0
|
|||
|
dd if=/dev/rdisk0s1 count=1 bs=512 of=origbs
|
|||
|
cp boot1f32alt newbs
|
|||
|
dd if=origbs of=newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
|
|||
|
dd if=newbs of=/dev/rdisk0s1 count=1 bs=512
|
|||
|
cp BOOT /Volumes/EFI/
|
|||
|
|
|||
|
|
|||
|
USB stick installation
|
|||
|
-----------------------
|
|||
|
Do not reformat factory formatted stick!
|
|||
|
|
|||
|
sudo fdisk440 -f boot0ss -u -y /dev/rdisk1
|
|||
|
dd if=/dev/rdisk1s1 count=1 bs=512 of=origbs
|
|||
|
cp boot1f32alt newbs
|
|||
|
dd if=origbs of=newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
|
|||
|
dd if=newbs of=/dev/rdisk1s1 count=1 bs=512
|
|||
|
cp BOOT /Volumes/Kingston/
|
|||
|
cp -r EFI /Volumes/Kingston/
|