CloverBootloader/BootHFS/Installation.txt

75 lines
2.6 KiB
Plaintext
Raw Normal View History

Installation ( Use fdisk440 instead of fdisk )
==============================================
Install fdisk440 first :
------------------------
sudo cp fdisk440 /usr/sbin/fdisk440
fdisk440 - The Chameleon team modded the Apple's fdisk to only update the first 440 bytes in the MBR by adjusting MBR_CODE_SIZE to 0x1B8. The modded fdisk was renamed fdisk440 by Tam<61>s Kos<6F>rszky on 2010-02-19 to avoid confusion between Apple's fdisk and the Chameleon fdisk.
This utility resolves Windows sleep problem.
Chameleon modded sources with explanations is here
http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj
Files Install :
--------------------
- Install clover to the partition's root directory:
cp BOOT /
cp -r EFI /
sudo cp -v etc/* /etc/
Active partition installation
-----------------------------
Suppose that your partition is on /dev/disk0s2 HFS+
- Install boot0ss to the MBR:
sudo ./fdisk440 -f boot0ss -u -y /dev/rdisk0
- Install boot1h2 to the partition's bootsector:
sudo dd if=boot1h2 of=/dev/rdisk0s2
Attention! My boot1h2 differs from Chameleon's one and will works with both Clover and Chameleon. You can't use Chameleon's boot1h with Clover-64.
Use boot1h2 to boot a bootloaders boot1, boot2, boot3...
Note: dd can't change boot sector of the system partition. You should start from other partition
EFI Partition Install (FAT32) or to USB stick drive (disk1s1).
---------------------------------
Suppose that your installation is on /dev/disk0s1
- Prepare EFI partition:
sudo mkdir /Volumes/EFI
sudo mount_msdos /dev/disk0s1 /Volumes/EFI/
- Install clover to the EFI partition's root directory:
cp boot /Volumes/EFI/
sudo umount -f /Volumes/EFI/
- Install boot0ss to the MBR:
sudo fdisk440 -f boot0ss -u -y /dev/rdisk0
- Install boot1f32alt to the partition's bootsector:
sudo fdisk440 -f boot0ss -u -y /dev/rdisk0
dd if=/dev/rdisk0s1 count=1 bs=512 of=origbs
cp boot1f32alt newbs
dd if=origbs of=newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
dd if=newbs of=/dev/rdisk0s1 count=1 bs=512
cp BOOT /Volumes/EFI/
USB stick installation
-----------------------
Do not reformat factory formatted stick!
sudo fdisk440 -f boot0ss -u -y /dev/rdisk1
dd if=/dev/rdisk1s1 count=1 bs=512 of=origbs
cp boot1f32alt newbs
dd if=origbs of=newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
dd if=newbs of=/dev/rdisk1s1 count=1 bs=512
cp BOOT /Volumes/Kingston/
cp -r EFI /Volumes/Kingston/