CloverBootloader/MdePkg/Include/Protocol/Tcp4.h

572 lines
25 KiB
C
Raw Normal View History

/** @file
EFI TCPv4(Transmission Control Protocol version 4) Protocol Definition
The EFI TCPv4 Service Binding Protocol is used to locate EFI TCPv4 Protocol drivers to create
and destroy child of the driver to communicate with other host using TCP protocol.
The EFI TCPv4 Protocol provides services to send and receive data stream.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Revision Reference:
This Protocol is introduced in UEFI Specification 2.0.
**/
#ifndef __EFI_TCP4_PROTOCOL_H__
#define __EFI_TCP4_PROTOCOL_H__
#include <Protocol/Ip4.h>
#define EFI_TCP4_SERVICE_BINDING_PROTOCOL_GUID \
{ \
0x00720665, 0x67EB, 0x4a99, {0xBA, 0xF7, 0xD3, 0xC3, 0x3A, 0x1C, 0x7C, 0xC9 } \
}
#define EFI_TCP4_PROTOCOL_GUID \
{ \
0x65530BC7, 0xA359, 0x410f, {0xB0, 0x10, 0x5A, 0xAD, 0xC7, 0xEC, 0x2B, 0x62 } \
}
typedef struct _EFI_TCP4_PROTOCOL EFI_TCP4_PROTOCOL;
///
/// EFI_TCP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should not be used any more.
/// The definition in here is only present to provide backwards compatability.
///
typedef struct {
EFI_HANDLE InstanceHandle;
EFI_IPv4_ADDRESS LocalAddress;
UINT16 LocalPort;
EFI_IPv4_ADDRESS RemoteAddress;
UINT16 RemotePort;
} EFI_TCP4_SERVICE_POINT;
///
/// EFI_TCP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not be used any more.
/// The definition in here is only present to provide backwards compatability.
///
typedef struct {
EFI_HANDLE DriverHandle;
UINT32 ServiceCount;
EFI_TCP4_SERVICE_POINT Services[1];
} EFI_TCP4_VARIABLE_DATA;
typedef struct {
BOOLEAN UseDefaultAddress;
EFI_IPv4_ADDRESS StationAddress;
EFI_IPv4_ADDRESS SubnetMask;
UINT16 StationPort;
EFI_IPv4_ADDRESS RemoteAddress;
UINT16 RemotePort;
BOOLEAN ActiveFlag;
} EFI_TCP4_ACCESS_POINT;
typedef struct {
UINT32 ReceiveBufferSize;
UINT32 SendBufferSize;
UINT32 MaxSynBackLog;
UINT32 ConnectionTimeout;
UINT32 DataRetries;
UINT32 FinTimeout;
UINT32 TimeWaitTimeout;
UINT32 KeepAliveProbes;
UINT32 KeepAliveTime;
UINT32 KeepAliveInterval;
BOOLEAN EnableNagle;
BOOLEAN EnableTimeStamp;
BOOLEAN EnableWindowScaling;
BOOLEAN EnableSelectiveAck;
BOOLEAN EnablePathMtuDiscovery;
} EFI_TCP4_OPTION;
typedef struct {
//
// I/O parameters
//
UINT8 TypeOfService;
UINT8 TimeToLive;
//
// Access Point
//
EFI_TCP4_ACCESS_POINT AccessPoint;
//
// TCP Control Options
//
EFI_TCP4_OPTION *ControlOption;
} EFI_TCP4_CONFIG_DATA;
///
/// TCP4 connnection state
///
typedef enum {
Tcp4StateClosed = 0,
Tcp4StateListen = 1,
Tcp4StateSynSent = 2,
Tcp4StateSynReceived = 3,
Tcp4StateEstablished = 4,
Tcp4StateFinWait1 = 5,
Tcp4StateFinWait2 = 6,
Tcp4StateClosing = 7,
Tcp4StateTimeWait = 8,
Tcp4StateCloseWait = 9,
Tcp4StateLastAck = 10
} EFI_TCP4_CONNECTION_STATE;
typedef struct {
EFI_EVENT Event;
EFI_STATUS Status;
} EFI_TCP4_COMPLETION_TOKEN;
typedef struct {
///
/// The Status in the CompletionToken will be set to one of
/// the following values if the active open succeeds or an unexpected
/// error happens:
/// EFI_SUCCESS: The active open succeeds and the instance's
/// state is Tcp4StateEstablished.
/// EFI_CONNECTION_RESET: The connect fails because the connection is reset
/// either by instance itself or the communication peer.
/// EFI_CONNECTION_REFUSED: The connect fails because this connection is initiated with
/// an active open and the connection is refused.
/// EFI_ABORTED: The active open is aborted.
/// EFI_TIMEOUT: The connection establishment timer expires and
/// no more specific information is available.
/// EFI_NETWORK_UNREACHABLE: The active open fails because
/// an ICMP network unreachable error is received.
/// EFI_HOST_UNREACHABLE: The active open fails because an
/// ICMP host unreachable error is received.
/// EFI_PROTOCOL_UNREACHABLE: The active open fails
/// because an ICMP protocol unreachable error is received.
/// EFI_PORT_UNREACHABLE: The connection establishment
/// timer times out and an ICMP port unreachable error is received.
/// EFI_ICMP_ERROR: The connection establishment timer timeout and some other ICMP
/// error is received.
/// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
/// EFI_NO_MEDIA: There was a media error.
///
EFI_TCP4_COMPLETION_TOKEN CompletionToken;
} EFI_TCP4_CONNECTION_TOKEN;
typedef struct {
EFI_TCP4_COMPLETION_TOKEN CompletionToken;
EFI_HANDLE NewChildHandle;
} EFI_TCP4_LISTEN_TOKEN;
typedef struct {
UINT32 FragmentLength;
VOID *FragmentBuffer;
} EFI_TCP4_FRAGMENT_DATA;
typedef struct {
BOOLEAN UrgentFlag;
UINT32 DataLength;
UINT32 FragmentCount;
EFI_TCP4_FRAGMENT_DATA FragmentTable[1];
} EFI_TCP4_RECEIVE_DATA;
typedef struct {
BOOLEAN Push;
BOOLEAN Urgent;
UINT32 DataLength;
UINT32 FragmentCount;
EFI_TCP4_FRAGMENT_DATA FragmentTable[1];
} EFI_TCP4_TRANSMIT_DATA;
typedef struct {
///
/// When transmission finishes or meets any unexpected error it will
/// be set to one of the following values:
/// EFI_SUCCESS: The receiving or transmission operation
/// completes successfully.
/// EFI_CONNECTION_FIN: The receiving operation fails because the communication peer
/// has closed the connection and there is no more data in the
/// receive buffer of the instance.
/// EFI_CONNECTION_RESET: The receiving or transmission operation fails
/// because this connection is reset either by instance
/// itself or the communication peer.
/// EFI_ABORTED: The receiving or transmission is aborted.
/// EFI_TIMEOUT: The transmission timer expires and no more
/// specific information is available.
/// EFI_NETWORK_UNREACHABLE: The transmission fails
/// because an ICMP network unreachable error is received.
/// EFI_HOST_UNREACHABLE: The transmission fails because an
/// ICMP host unreachable error is received.
/// EFI_PROTOCOL_UNREACHABLE: The transmission fails
/// because an ICMP protocol unreachable error is received.
/// EFI_PORT_UNREACHABLE: The transmission fails and an
/// ICMP port unreachable error is received.
/// EFI_ICMP_ERROR: The transmission fails and some other
/// ICMP error is received.
/// EFI_DEVICE_ERROR: An unexpected system or network error occurs.
/// EFI_NO_MEDIA: There was a media error.
///
EFI_TCP4_COMPLETION_TOKEN CompletionToken;
union {
///
/// When this token is used for receiving, RxData is a pointer to EFI_TCP4_RECEIVE_DATA.
///
EFI_TCP4_RECEIVE_DATA *RxData;
///
/// When this token is used for transmitting, TxData is a pointer to EFI_TCP4_TRANSMIT_DATA.
///
EFI_TCP4_TRANSMIT_DATA *TxData;
} Packet;
} EFI_TCP4_IO_TOKEN;
typedef struct {
EFI_TCP4_COMPLETION_TOKEN CompletionToken;
BOOLEAN AbortOnClose;
} EFI_TCP4_CLOSE_TOKEN;
//
// Interface definition for TCP4 protocol
//
/**
Get the current operational status.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param Tcp4State The pointer to the buffer to receive the current TCP state.
@param Tcp4ConfigData The pointer to the buffer to receive the current TCP configuration.
@param Ip4ModeData The pointer to the buffer to receive the current IPv4 configuration
data used by the TCPv4 instance.
@param MnpConfigData The pointer to the buffer to receive the current MNP configuration
data used indirectly by the TCPv4 instance.
@param SnpModeData The pointer to the buffer to receive the current SNP configuration
data used indirectly by the TCPv4 instance.
@retval EFI_SUCCESS The mode data was read.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_STARTED No configuration data is available because this instance hasn't
been started.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_GET_MODE_DATA)(
IN EFI_TCP4_PROTOCOL *This,
OUT EFI_TCP4_CONNECTION_STATE *Tcp4State OPTIONAL,
OUT EFI_TCP4_CONFIG_DATA *Tcp4ConfigData OPTIONAL,
OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL,
OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL,
OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL
);
/**
Initialize or brutally reset the operational parameters for this EFI TCPv4 instance.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param Tcp4ConfigData The pointer to the configure data to configure the instance.
@retval EFI_SUCCESS The operational settings are set, changed, or reset
successfully.
@retval EFI_INVALID_PARAMETER Some parameter is invalid.
@retval EFI_NO_MAPPING When using a default address, configuration (through
DHCP, BOOTP, RARP, etc.) is not finished yet.
@retval EFI_ACCESS_DENIED Configuring TCP instance when it is configured without
calling Configure() with NULL to reset it.
@retval EFI_DEVICE_ERROR An unexpected network or system error occurred.
@retval EFI_UNSUPPORTED One or more of the control options are not supported in
the implementation.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when
executing Configure().
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_CONFIGURE)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_CONFIG_DATA *TcpConfigData OPTIONAL
);
/**
Add or delete a route entry to the route table
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param DeleteRoute Set it to TRUE to delete this route from the routing table. Set it to
FALSE to add this route to the routing table.
DestinationAddress and SubnetMask are used as the
keywords to search route entry.
@param SubnetAddress The destination network.
@param SubnetMask The subnet mask of the destination network.
@param GatewayAddress The gateway address for this route. It must be on the same
subnet with the station address unless a direct route is specified.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The EFI TCPv4 Protocol instance has not been configured.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- SubnetAddress is NULL.
- SubnetMask is NULL.
- GatewayAddress is NULL.
- *SubnetAddress is not NULL a valid subnet address.
- *SubnetMask is not a valid subnet mask.
- *GatewayAddress is not a valid unicast IP address or it
is not in the same subnet.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resources to add the entry to the
routing table.
@retval EFI_NOT_FOUND This route is not in the routing table.
@retval EFI_ACCESS_DENIED The route is already defined in the routing table.
@retval EFI_UNSUPPORTED The TCP driver does not support this operation.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_ROUTES)(
IN EFI_TCP4_PROTOCOL *This,
IN BOOLEAN DeleteRoute,
IN EFI_IPv4_ADDRESS *SubnetAddress,
IN EFI_IPv4_ADDRESS *SubnetMask,
IN EFI_IPv4_ADDRESS *GatewayAddress
);
/**
Initiate a nonblocking TCP connection request for an active TCP instance.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param ConnectionToken The pointer to the connection token to return when the TCP three
way handshake finishes.
@retval EFI_SUCCESS The connection request is successfully initiated and the state
of this TCPv4 instance has been changed to Tcp4StateSynSent.
@retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
@retval EFI_ACCESS_DENIED One or more of the following conditions are TRUE:
- This instance is not configured as an active one.
- This instance is not in Tcp4StateClosed state.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- ConnectionToken is NULL.
- ConnectionToken->CompletionToken.Event is NULL.
@retval EFI_OUT_OF_RESOURCES The driver can't allocate enough resource to initiate the activ eopen.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_CONNECT)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_CONNECTION_TOKEN *ConnectionToken
);
/**
Listen on the passive instance to accept an incoming connection request. This is a nonblocking operation.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param ListenToken The pointer to the listen token to return when operation finishes.
@retval EFI_SUCCESS The listen token has been queued successfully.
@retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
@retval EFI_ACCESS_DENIED One or more of the following are TRUE:
- This instance is not a passive instance.
- This instance is not in Tcp4StateListen state.
- The same listen token has already existed in the listen
token queue of this TCP instance.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- ListenToken is NULL.
- ListentToken->CompletionToken.Event is NULL.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
@retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_ACCEPT)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_LISTEN_TOKEN *ListenToken
);
/**
Queues outgoing data into the transmit queue.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param Token The pointer to the completion token to queue to the transmit queue.
@retval EFI_SUCCESS The data has been queued for transmission.
@retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- Token is NULL.
- Token->CompletionToken.Event is NULL.
- Token->Packet.TxData is NULL L.
- Token->Packet.FragmentCount is zero.
- Token->Packet.DataLength is not equal to the sum of fragment lengths.
@retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE:
- A transmit completion token with the same Token->CompletionToken.Event
was already in the transmission queue.
- The current instance is in Tcp4StateClosed state.
- The current instance is a passive one and it is in
Tcp4StateListen state.
- User has called Close() to disconnect this connection.
@retval EFI_NOT_READY The completion token could not be queued because the
transmit queue is full.
@retval EFI_OUT_OF_RESOURCES Could not queue the transmit data because of resource
shortage.
@retval EFI_NETWORK_UNREACHABLE There is no route to the destination network or address.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_TRANSMIT)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_IO_TOKEN *Token
);
/**
Places an asynchronous receive request into the receiving queue.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param Token The pointer to a token that is associated with the receive data
descriptor.
@retval EFI_SUCCESS The receive completion token was cached.
@retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP,
etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- Token is NULL.
- Token->CompletionToken.Event is NULL.
- Token->Packet.RxData is NULL.
- Token->Packet.RxData->DataLength is 0.
- The Token->Packet.RxData->DataLength is not
the sum of all FragmentBuffer length in FragmentTable.
@retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of
system resources (usually memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE:
- A receive completion token with the same Token-
>CompletionToken.Event was already in the receive
queue.
- The current instance is in Tcp4StateClosed state.
- The current instance is a passive one and it is in
Tcp4StateListen state.
- User has called Close() to disconnect this connection.
@retval EFI_CONNECTION_FIN The communication peer has closed the connection and there is
no any buffered data in the receive buffer of this instance.
@retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_RECEIVE)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_IO_TOKEN *Token
);
/**
Disconnecting a TCP connection gracefully or reset a TCP connection. This function is a
nonblocking operation.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param CloseToken The pointer to the close token to return when operation finishes.
@retval EFI_SUCCESS The Close() is called successfully.
@retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
@retval EFI_ACCESS_DENIED One or more of the following are TRUE:
- Configure() has been called with
TcpConfigData set to NULL and this function has
not returned.
- Previous Close() call on this instance has not
finished.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- CloseToken is NULL.
- CloseToken->CompletionToken.Event is NULL.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
@retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_CLOSE)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_CLOSE_TOKEN *CloseToken
);
/**
Abort an asynchronous connection, listen, transmission or receive request.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@param Token The pointer to a token that has been issued by
EFI_TCP4_PROTOCOL.Connect(),
EFI_TCP4_PROTOCOL.Accept(),
EFI_TCP4_PROTOCOL.Transmit() or
EFI_TCP4_PROTOCOL.Receive(). If NULL, all pending
tokens issued by above four functions will be aborted. Type
EFI_TCP4_COMPLETION_TOKEN is defined in
EFI_TCP4_PROTOCOL.Connect().
@retval EFI_SUCCESS The asynchronous I/O request is aborted and Token->Event
is signaled.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_STARTED This instance hasn't been configured.
@retval EFI_NO_MAPPING When using the default address, configuration
(DHCP, BOOTP,RARP, etc.) hasn't finished yet.
@retval EFI_NOT_FOUND The asynchronous I/O request isn't found in the
transmission or receive queue. It has either
completed or wasn't issued by Transmit() and Receive().
@retval EFI_UNSUPPORTED The implementation does not support this function.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_CANCEL)(
IN EFI_TCP4_PROTOCOL *This,
IN EFI_TCP4_COMPLETION_TOKEN *Token OPTIONAL
);
/**
Poll to receive incoming data and transmit outgoing segments.
@param This The pointer to the EFI_TCP4_PROTOCOL instance.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_NOT_READY No incoming or outgoing data is processed.
@retval EFI_TIMEOUT Data was dropped out of the transmission or receive queue.
Consider increasing the polling rate.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TCP4_POLL)(
IN EFI_TCP4_PROTOCOL *This
);
///
/// The EFI_TCP4_PROTOCOL defines the EFI TCPv4 Protocol child to be used by
/// any network drivers or applications to send or receive data stream.
/// It can either listen on a specified port as a service or actively connected
/// to remote peer as a client. Each instance has its own independent settings,
/// such as the routing table.
///
struct _EFI_TCP4_PROTOCOL {
EFI_TCP4_GET_MODE_DATA GetModeData;
EFI_TCP4_CONFIGURE Configure;
EFI_TCP4_ROUTES Routes;
EFI_TCP4_CONNECT Connect;
EFI_TCP4_ACCEPT Accept;
EFI_TCP4_TRANSMIT Transmit;
EFI_TCP4_RECEIVE Receive;
EFI_TCP4_CLOSE Close;
EFI_TCP4_CANCEL Cancel;
EFI_TCP4_POLL Poll;
};
extern EFI_GUID gEfiTcp4ServiceBindingProtocolGuid;
extern EFI_GUID gEfiTcp4ProtocolGuid;
#endif