CloverBootloader/Drivers/Isa/IsaBusDxe/InternalIsaBus.h

298 lines
12 KiB
C
Raw Normal View History

/** @file
The header file for ISA bus driver
Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _INTERNAL_ISA_BUS_H_
#define _INTERNAL_ISA_BUS_H_
#include <Uefi.h>
#include <Protocol/PciIo.h>
#include <Protocol/ComponentName.h>
#include <Protocol/IsaIo.h>
#include <Protocol/DevicePath.h>
#include <Protocol/IsaAcpi.h>
#include <Protocol/DriverBinding.h>
#include <Protocol/GenericMemoryTest.h>
#include <Guid/StatusCodeDataTypeId.h>
#include <Library/DebugLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiLib.h>
#include <Library/DevicePathLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/PcdLib.h>
#include "ComponentName.h"
//
// 8237 DMA registers
//
#define R_8237_DMA_BASE_CA_CH0 0x00
#define R_8237_DMA_BASE_CA_CH1 0x02
#define R_8237_DMA_BASE_CA_CH2 0x04
#define R_8237_DMA_BASE_CA_CH3 0xd6
#define R_8237_DMA_BASE_CA_CH5 0xc4
#define R_8237_DMA_BASE_CA_CH6 0xc8
#define R_8237_DMA_BASE_CA_CH7 0xcc
#define R_8237_DMA_BASE_CC_CH0 0x01
#define R_8237_DMA_BASE_CC_CH1 0x03
#define R_8237_DMA_BASE_CC_CH2 0x05
#define R_8237_DMA_BASE_CC_CH3 0xd7
#define R_8237_DMA_BASE_CC_CH5 0xc6
#define R_8237_DMA_BASE_CC_CH6 0xca
#define R_8237_DMA_BASE_CC_CH7 0xce
#define R_8237_DMA_MEM_LP_CH0 0x87
#define R_8237_DMA_MEM_LP_CH1 0x83
#define R_8237_DMA_MEM_LP_CH2 0x81
#define R_8237_DMA_MEM_LP_CH3 0x82
#define R_8237_DMA_MEM_LP_CH5 0x8B
#define R_8237_DMA_MEM_LP_CH6 0x89
#define R_8237_DMA_MEM_LP_CH7 0x8A
#define R_8237_DMA_COMMAND_CH0_3 0x08
#define R_8237_DMA_COMMAND_CH4_7 0xd0
#define B_8237_DMA_COMMAND_GAP 0x10
#define B_8237_DMA_COMMAND_CGE 0x04
#define R_8237_DMA_STA_CH0_3 0xd8
#define R_8237_DMA_STA_CH4_7 0xd0
#define R_8237_DMA_WRSMSK_CH0_3 0x0a
#define R_8237_DMA_WRSMSK_CH4_7 0xd4
#define B_8237_DMA_WRSMSK_CMS 0x04
#define R_8237_DMA_CHMODE_CH0_3 0x0b
#define R_8237_DMA_CHMODE_CH4_7 0xd6
#define V_8237_DMA_CHMODE_DEMAND 0x00
#define V_8237_DMA_CHMODE_SINGLE 0x40
#define V_8237_DMA_CHMODE_CASCADE 0xc0
#define B_8237_DMA_CHMODE_DECREMENT 0x20
#define B_8237_DMA_CHMODE_INCREMENT 0x00
#define B_8237_DMA_CHMODE_AE 0x10
#define V_8237_DMA_CHMODE_VERIFY 0
#define V_8237_DMA_CHMODE_IO2MEM 0x04
#define V_8237_DMA_CHMODE_MEM2IO 0x08
#define R_8237_DMA_CBPR_CH0_3 0x0c
#define R_8237_DMA_CBPR_CH4_7 0xd8
#define R_8237_DMA_MCR_CH0_3 0x0d
#define R_8237_DMA_MCR_CH4_7 0xda
#define R_8237_DMA_CLMSK_CH0_3 0x0e
#define R_8237_DMA_CLMSK_CH4_7 0xdc
#define R_8237_DMA_WRMSK_CH0_3 0x0f
#define R_8237_DMA_WRMSK_CH4_7 0xde
typedef enum {
IsaAccessTypeUnknown,
IsaAccessTypeIo,
IsaAccessTypeMem,
IsaAccessTypeMaxType
} ISA_ACCESS_TYPE;
//
// 16 MB Memory Range
//
#define ISA_MAX_MEMORY_ADDRESS 0x1000000
//
// 64K I/O Range
//
#define ISA_MAX_IO_ADDRESS 0x10000
typedef struct {
UINT8 Address;
UINT8 Page;
UINT8 Count;
} EFI_ISA_DMA_REGISTERS;
//
// ISA I/O Device Structure
//
#define ISA_IO_DEVICE_SIGNATURE SIGNATURE_32 ('i', 's', 'a', 'i')
typedef struct {
UINT32 Signature;
EFI_HANDLE Handle;
EFI_ISA_IO_PROTOCOL IsaIo;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
EFI_PCI_IO_PROTOCOL *PciIo;
} ISA_IO_DEVICE;
#define ISA_IO_DEVICE_FROM_ISA_IO_THIS(a) CR (a, ISA_IO_DEVICE, IsaIo, ISA_IO_DEVICE_SIGNATURE)
//
// Mapping structure for performing ISA DMA to a buffer above 16 MB
//
typedef struct {
EFI_ISA_IO_PROTOCOL_OPERATION Operation;
UINTN NumberOfBytes;
UINTN NumberOfPages;
EFI_PHYSICAL_ADDRESS HostAddress;
EFI_PHYSICAL_ADDRESS MappedHostAddress;
} ISA_MAP_INFO;
//
// EFI Driver Binding Protocol Interface Functions
//
/**
Tests to see if a controller can be managed by the ISA Bus Driver. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
Note that the ISA Bus driver always creates all of its child handles on the first call to Start().
How the Start() function of a driver is implemented can affect how the Supported() function is implemented.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] Controller The handle of the controller to test.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
@retval EFI_SUCCESS The device is supported by this driver.
@retval EFI_ALREADY_STARTED The device is already being managed by this driver.
@retval EFI_ACCESS_DENIED The device is already being managed by a different driver
or an application that requires exclusive access.
@retval EFI_UNSUPPORTED The device is is not supported by this driver.
**/
EFI_STATUS
EFIAPI
IsaBusControllerDriverSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
);
/**
Start this driver on ControllerHandle.
Note that the ISA Bus driver always creates all of its child handles on the first call to Start().
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations, but the following calling
restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
This parameter is ignored by device drivers, and is optional for bus drivers.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.
Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
IsaBusControllerDriverStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
);
/**
Stop this driver on ControllerHandle.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
IsaBusControllerDriverStop (
IN EFI_DRIVER_BINDING_PROTOCOL * This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE * ChildHandleBuffer OPTIONAL
);
//
// Function Prototypes
//
/**
Create EFI Handle for a ISA device found via ISA ACPI Protocol
@param[in] This The EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] Controller The handle of ISA bus controller(PCI to ISA bridge)
@param[in] PciIo The Pointer to the PCI protocol
@param[in] ParentDevicePath Device path of the ISA bus controller
@param[in] IsaDeviceResourceList The resource list of the ISA device
@param[out] ChildDevicePath The pointer to the child device.
@retval EFI_SUCCESS The handle for the child device was created.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The handle for the child device can not be created.
**/
EFI_STATUS
IsaCreateDevice (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
IN EFI_ISA_ACPI_RESOURCE_LIST *IsaDeviceResourceList,
OUT EFI_DEVICE_PATH_PROTOCOL **ChildDevicePath
);
/**
Initializes an ISA I/O Instance
@param[in] IsaIoDevice The iso device to be initialized.
@param[in] IsaDeviceResourceList The resource list.
**/
VOID
InitializeIsaIoInstance (
IN ISA_IO_DEVICE *IsaIoDevice,
IN EFI_ISA_ACPI_RESOURCE_LIST *IsaDevice
);
#endif