#: Resources/templates/Conclusion.html:20 msgid "r%CLOVERREVISION%" msgstr "r%CLOVERREVISION%" #. type: Content of:

#: Resources/templates/Conclusion.html:22 msgid "Installation Complete!" msgstr "安裝完成" #. type: "MakingRootRW" #: Resources/templates/Localizable.strings:4 #, no-wrap msgid "" "Clover wants to make the root file system read-write.\n" "The change is temporary until the next reboot" msgstr "" #. type: "GoToFailRootRW" #: Resources/templates/Localizable.strings:6 #, no-wrap msgid "Cannot install without ensuring the file system is read-write" msgstr "" #. type: "UEFI.only_title" #: Resources/templates/Localizable.strings:10 #, no-wrap msgid "Install for UEFI booting only" msgstr "僅安裝 UEFI 開機版本" #. type: "UEFI.only_description" #: Resources/templates/Localizable.strings:11 #, no-wrap msgid "Install Clover to be used with UEFI motherboards only." msgstr "僅安裝 UEFI 主機板專用的 Clover 版本" #. type: "Target.ESP_title" #: Resources/templates/Localizable.strings:16 #, no-wrap msgid "Install Clover in the ESP" msgstr "安裝 Clover 到 EFI 系統區" #. type: "Target.ESP_description" #: Resources/templates/Localizable.strings:17 #, no-wrap msgid "" "Install Clover in the ESP (EFI System Partition) of the target volume\n" "\n" "Need to format ESP as Fat32 on Mac first.\n" "\n" "For Fat32 use commands like:\n" "diskutil list\n" "newfs_msdos -v EFI -F 32 /dev/rdisk9s1" msgstr "" "安裝 Clover 到目標磁區的 EFI 系統區\n" "\n" "需要在 Mac 下，先將 EFI 系統區格式化為 Fat32 格式。\n" "\n" "參考 Fat32 手動格式化指令:\n" "diskutil list\n" "newfs_msdos -v EFI -F 32 /dev/rdisk9s1" #. type: "Bootloader_title" #: Resources/templates/Localizable.strings:29 #, no-wrap msgid "Bootloader" msgstr "Bootloader" #. type: "Bootloader_description" #: Resources/templates/Localizable.strings:30 #, no-wrap msgid "" "Clover EFI requires three essential files. (in simple terms)\n" "boot0 (On the drive's MBR) responsible for loading boot1.\n" "boot1 (On the partition's boot-sector) to finding boot2.\n" "boot2 (On the partition's root directory) for loading /EFI/CLOVER/CLOVERIA32.efi or CLOVERX64.efi, and kernel etc." msgstr "" "簡而言之，Clover EFI 幸運草需要三個必要的檔案。\n" "boot0 (在硬碟的 MBR) 負責載入 boot1。\n" "boot1 (在分割區的開機磁區 boot-sector) 搜尋 boot2。\n" "boot2 (在分割區的根目錄) 載入 /EFI/CLOVER/CLOVERIA32.efi 或 CLOVERX64.efi 及系統核心等等。" #. type: "boot0af_title" #: Resources/templates/Localizable.strings:35 #, no-wrap msgid "Install boot0af in MBR" msgstr "BIOS 安裝 boot0af (HFS+Fat32)" #. type: "boot0af_description" #: Resources/templates/Localizable.strings:36 #, fuzzy, no-wrap #| msgid "" #| "Used for BIOS booting on BIOS motherboards.\n" #| "boot0af (boot0 Active First) bootloader try to boot the active partition defined in MBR. If there is no active partition, it will try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature.\n" #| "This choice will setup selected HFS/Fat32 partition to be active." msgid "" "Used for BIOS booting on GPT partition.\n" "boot0af (boot0 Active First) bootloader try to boot the active partition defined in MBR. If there is no active partition, it will try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature.\n" "This choice will setup selected HFS/Fat32 partition to be active.\n" "WARNING On macOS Catalina and macOS Big Sur the system is a read-only file system, you cannot use this option without selecting the ESP option otherwise the installation will fail, for any older system there is no problem." msgstr "" "BIOS 主機板之 BIOS 啓動專用。\n" "使用 fdisk440 將 boot0af 寫入 MBR 的前 440 位元，避免損壞已經存在的 Windows 機碼，boot0af 優先引導 MBR 的啓動分割區，如果沒有啓動分割區，將引導第一個 EFI/FAT32/HFS 的 boot1 分區(優先引導MBR，其次引導GPT)。\n" "本安裝將會設定 HFS 及 Fat32 安裝分割區為啟動分割區。\n" "如須安裝在 Fat32 格式，必須在 Win 先將分割區格式化為 Fat32 格式分割區，或在 Mac 操作如下\n" " 1. 先用磁碟工具清除為 MS-DOS (FAT) 格式\n" " 2. diskutil list\n" " 3. diskutil unmount /dev/rdisk9s1\n" " 4. newfs_msdos -v Fat32 -F 32 /dev/rdisk9s1\n" " 5. diskutil mount /dev/rdisk9s1" #. type: "boot0ss_title" #: Resources/templates/Localizable.strings:41 #, no-wrap msgid "Install boot0ss in MBR" msgstr "BIOS 安裝 boot0ss (HFS+Fat32)" #. type: "boot0ss_description" #: Resources/templates/Localizable.strings:42 #, fuzzy, no-wrap #| msgid "" #| "Used for BIOS booting on BIOS motherboards.\n" #| "boot0ss (boot0 Signature Scanning) bootloader try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature. If no partition is found it will try to boot the active partition defined in MBR.\n" #| "This bootloader is a good choice when you have Windows installed on the same disk because Windows wants to have its partition active.\n" #| "This choice will not activate any partition in MBR." msgid "" "Used for BIOS booting on MBR partition.\n" "boot0ss (boot0 Signature Scanning) bootloader try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature. If no partition is found it will try to boot the active partition defined in MBR.\n" "This bootloader is a good choice when you have Windows installed on the same disk because Windows wants to have its partition active.\n" "This choice will not activate any partition in MBR. \n" "WARNING On macOS Catalina and macOS Big Sur the system is a read-only file system, you cannot use this option without selecting the ESP option otherwise the installation will fail, for any older system there is no problem." msgstr "" "BIOS 主機板之 BIOS 啓動專用。\n" "使用 fdisk440 將 boot0ss 寫入 MBR 的前 440 位元，避免損壞已經存在的 Windows 機碼，boot0ss 優先引導第一個 EFI/FAT32/HFS 的方割區的 boot1 分區(優先引導MBR，其次引導GPT)，如果沒有找到 boot1 分割區，將引導 MBR 的啓動分割區。\n" "本安裝將不會設定任何分區為啟動分區。\n" "如須安裝在 Fat32 格式，必須在 Win 先將分割區格式化為 Fat32 格式分割區，或在 Mac 操作如下\n" "1. 先用磁碟工具清除為 MS-DOS (FAT) 格式\n" "2. diskutil list\n" "3. diskutil unmount /dev/rdisk9s1\n" "4. newfs_msdos -v Fat32 -F 32 /dev/rdisk9s1\n" "5. diskutil mount /dev/rdisk9s1" #. type: "bootNo_title" #: Resources/templates/Localizable.strings:48 #, no-wrap msgid "Don't update MBR and PBR sectors" msgstr "不更新 MBR 及 PBR 磁區" #. type: "bootNo_description" #: Resources/templates/Localizable.strings:49 #, no-wrap msgid "" "Don't install any bootloader (boot0X, boot1X).\n" "Usefull for UEFI motherboards that don't need bootloader files.\n" "Can also be use if you don't want to upgrade MBR or PBR sectors." msgstr "" "不安裝任何引導檔案 (boot0X, boot1X)。\n" "適用於不需要任何引導檔案的 UEFI 主機板。\n" "適用於不需要更新 MBR(boot0X) 及 PBR(boot1X) 的4kb格式硬碟。" #. type: "AltBoot_title" #: Resources/templates/Localizable.strings:53 #, no-wrap msgid "Use alternative booting PBR" msgstr "安裝 PBR 的多重開機選項" #. type: "AltBoot_description" #: Resources/templates/Localizable.strings:54 #, no-wrap msgid "" "Install alternative booting PBR with choice of boot with a key pressed.\n" "File to boot = boot{keypressed}" msgstr "" "安裝 PBR 的多重開機選項，boot1=變色龍引導，boot6=64位 Clover 引導。\n" "可設定開機 boot = boot{按鍵} 進行多重開機設定。" #. type: "boot64_title" #: Resources/templates/Localizable.strings:57 #, no-wrap msgid "Install & Start 64bit boot first" msgstr "安裝 boot 64位優先啟動" #. type: "boot64_description" #: Resources/templates/Localizable.strings:58 #, no-wrap msgid "" "Install boot files and set to start 64bit first.\n" "Default boot to boot = Clover EFI 64bit. You can..\n" "Press key 1 to boot1 = Chameleon boot,\n" "Press key 3 to boot3 = Clover EFI 32bit boot,\n" "Press key 6 to boot6 = Clover EFI 64bit boot." msgstr "" "安裝 32位+64位 boot 文件，並優先啟用 64位系統。\n" "預設啟動 boot = Clover boot 64位，可在 test done 的 2 秒內，\n" "按 1 選 boot1 = 變色龍 boot，\n" "按 3 選 boot3 = Clover boot 32位，\n" "按 6 選 boot6 = Clover boot 64位。" #. type: "CloverEFI_title" #: Resources/templates/Localizable.strings:67 #, no-wrap msgid "CloverEFI" msgstr "CloverEFI" #. type: "CloverEFI_description" #: Resources/templates/Localizable.strings:68 #, no-wrap msgid "Select the version of CloverEFI to install." msgstr "選擇要安裝的 CloverEFI 版本。" #. type: "cloverEFI.64.sata_title" #: Resources/templates/Localizable.strings:69 #, no-wrap msgid "CloverEFI 64-bits SATA" msgstr "CloverEFI 64位 SATA" #. type: "cloverEFI.64.sata_description" #: Resources/templates/Localizable.strings:70 #, no-wrap msgid "CloverEFI 64-bits using SATA to access drives" msgstr "CloverEFI 64位版本，使用 SATA 模式存取硬碟。" #. type: "cloverEFI.64.blockio_title" #: Resources/templates/Localizable.strings:71 #, no-wrap msgid "CloverEFI 64-bits BiosBlockIO" msgstr "CloverEFI 64位 BiosBlockIO" #. type: "cloverEFI.64.blockio_description" #: Resources/templates/Localizable.strings:72 #, no-wrap msgid "CloverEFI 64-bits using Bios Block I/O to access drives" msgstr "CloverEFI 64位版本，使用 Bios Block I/O 模式存取硬碟。" #. type: "cloverEFI.64.blockio2_title" #: Resources/templates/Localizable.strings:73 #, no-wrap msgid "CloverEFI 64-bits BiosBlockIO for NVIDIA NForce MCP79" msgstr "CloverEFI 64位 BiosBlockIO" #. type: "cloverEFI.64.blockio2_description" #: Resources/templates/Localizable.strings:74 #, no-wrap msgid "CloverEFI 64-bits using Bios Block I/O to access drives for chipset NVIDIA NForce MCP79" msgstr "CloverEFI 64位版本，使用 Bios Block I/O 模式存取硬碟。" #. type: "off_title" #: Resources/templates/Localizable.strings:79 #, no-wrap msgid "Drivers off" msgstr "" #. type: "off_description" #: Resources/templates/Localizable.strings:80 #, no-wrap msgid "" "Installs all available drivers in EFI/CLOVER/drivers/off/\n" "off directory isn't loaded by Clover any how and this is only helpfull if you have to use the EFI shell to copy a missing driver or replace a bad one during the boot if a need be." msgstr "" #. type: "Drivers64_title" #: Resources/templates/Localizable.strings:83 #, no-wrap msgid "BIOS Drivers, 64 bit" msgstr "BIOS Drivers, 64 bit" #. type: "Drivers64_description" #: Resources/templates/Localizable.strings:84 #, no-wrap msgid "Select drivers for BIOS-booting." msgstr "Select drivers for BIOS-booting." #. type: "Recommended64UEFI_title" #: Resources/templates/Localizable.strings:86 #: Resources/templates/Localizable.strings:117 #, no-wrap msgid "Recommended drivers" msgstr "" #. type: "Recommended64UEFI_description" #: Resources/templates/Localizable.strings:87 #: Resources/templates/Localizable.strings:118 #, no-wrap msgid "Recommended drivers, mostly mandatory." msgstr "" #. type: "FileSystem64UEFI_title" #: Resources/templates/Localizable.strings:89 #: Resources/templates/Localizable.strings:123 #, fuzzy, no-wrap #| msgid "FAT filesystem driver." msgid "File System drivers" msgstr "FAT filesystem driver." #. type: "FileSystem64UEFI_description" #: Resources/templates/Localizable.strings:90 #: Resources/templates/Localizable.strings:124 #, fuzzy, no-wrap #| msgid "Alternate HFS+ filesystem driver." msgid "A collection of file system drivers." msgstr "Alternate HFS+ filesystem driver." #. type: "Drivers64FV2_title" #: Resources/templates/Localizable.strings:92 #, no-wrap msgid "FileVault 2 BIOS Drivers, 64 bit" msgstr "FileVault 2 BIOS Drivers, 64 bit" #. type: "Drivers64FV2_description" #: Resources/templates/Localizable.strings:93 #, no-wrap msgid "Select drivers for BIOS-booting with FileVault 2." msgstr "Select drivers for BIOS-booting with FileVault 2." #. type: "ApfsDriverLoader.UEFI_description" #: Resources/templates/Localizable.strings:95 #: Resources/templates/Localizable.strings:135 #, no-wrap msgid "64bit driver to load APFS filesystem driver from container" msgstr "Supports APFS filesystem driver from container for macOS 10.14." #. type: "AppleImageCodec.UEFI_description" #: Resources/templates/Localizable.strings:96 #: Resources/templates/Localizable.strings:138 #, no-wrap msgid "For decode PNG and BMP images in boot UI" msgstr "Decode PNG and BMP for FileVault2." #. type: "AppleImageLoader.UEFI_description" #: Resources/templates/Localizable.strings:97 #: Resources/templates/Localizable.strings:139 #, no-wrap msgid "Secure AppleEfiFat binary driver with implementation of AppleLoadImage protocol with EfiBinary signature verification." msgstr "Secure AppleEfiFat binary driver with implementation of AppleLoadImage protocol with EfiBinary signature verification." #. type: "AppleKeyAggregator.UEFI_description" #: Resources/templates/Localizable.strings:98 #: Resources/templates/Localizable.strings:140 #, no-wrap msgid "Support for boot UI dialog for FileVault2" msgstr "Support for boot UI dialog for FileVault2." #. type: "AppleKeyFeeder.UEFI_description" #: Resources/templates/Localizable.strings:99 #: Resources/templates/Localizable.strings:141 #, no-wrap msgid "Support for PS/2 keyboard to use with FileVault2" msgstr "Support for PS/2 keyboard to use with FileVault2" #. type: "AppleUISupport.UEFI_description" #: Resources/templates/Localizable.strings:100 #: Resources/templates/Localizable.strings:142 #, no-wrap msgid "Set of protocols for support EfiLoginUi for FileVault." msgstr "Set of protocols for support EfiLoginUi for FileVault." #. type: "AppleUITheme.UEFI_description" #: Resources/templates/Localizable.strings:101 #: Resources/templates/Localizable.strings:143 #, no-wrap msgid "Create boot UI Themes support" msgstr "Create boot UI Themes support for FileVault2." #. type: "AptioInputFix.UEFI_description" #: Resources/templates/Localizable.strings:102 #: Resources/templates/Localizable.strings:144 #, no-wrap msgid "Driver to fix input problems on UEFI firmware such as AMI Aptio." msgstr "Driver to fix input problems on UEFI firmware such as AMI Aptio." #. type: "AptioMemoryFix.UEFI_description" #: Resources/templates/Localizable.strings:103 #: Resources/templates/Localizable.strings:145 #, fuzzy, no-wrap #| msgid "Old 64bit driver to fix Memory problems on UEFI firmware such as AMI Aptio" msgid "Obsolete 64bit driver to fix Memory problems on UEFI firmware such as AMI Aptio" msgstr "Old 64-bits Driver to fix Memory problems on UEFI firmware such as AMI Aptio. Do not use with other AptioFix together." #. type: "AudioDxe_description" #: Resources/templates/Localizable.strings:104 #, no-wrap msgid "HDA driver to play Startup Sound" msgstr "" #. type: "FirmwareVolume.UEFI_description" #: Resources/templates/Localizable.strings:105 #: Resources/templates/Localizable.strings:157 #, no-wrap msgid "Create FirmwareVolume with cursor images" msgstr "Create FirmwareVolume with cursor images for FileVault2." #. type: "FSInject.UEFI_description" #: Resources/templates/Localizable.strings:106 #: Resources/templates/Localizable.strings:158 #, no-wrap msgid "Provide injection of kexts from Clover folder." msgstr "Provide injection of kernel extensions from Clover folder." #. type: "GrubEXFAT_description" #: Resources/templates/Localizable.strings:107 #, no-wrap msgid "ExFAT filesystem driver from GRUB." msgstr "ExFAT filesystem driver." #. type: "GrubISO9660_description" #: Resources/templates/Localizable.strings:108 #, no-wrap msgid "ISO 9600 filesystem driver from GRUB." msgstr "ISO9600 filesystem driver." #. type: "GrubNTFS_description" #: Resources/templates/Localizable.strings:109 #, no-wrap msgid "NTFS filesystem driver from GRUB." msgstr "NTFS filesystem driver." #. type: "GrubUDF_description" #: Resources/templates/Localizable.strings:110 #, no-wrap msgid "UDF filesystem driver from GRUB." msgstr "UDF filesystem driver." #. type: "SMCHelper.UEFI_description" #: Resources/templates/Localizable.strings:111 #: Resources/templates/Localizable.strings:168 #, no-wrap msgid "Restore SMC keys left in nvram by FakeSMC" msgstr "Restore SMC keys left in NVRAM by FakeSMC." #. type: "XhciDxe_description" #: Resources/templates/Localizable.strings:112 #, no-wrap msgid "USB 3.0 driver, 64bit" msgstr "USB 3.0 driver, 64bit" #. type: "Drivers64UEFI_title" #: Resources/templates/Localizable.strings:114 #, no-wrap msgid "UEFI Drivers, 64 bit" msgstr "UEFI Drivers" #. type: "Drivers64UEFI_description" #: Resources/templates/Localizable.strings:115 #, no-wrap msgid "Select drivers for UEFI-booting." msgstr "Select drivers for UEFI-booting." #. type: "HID64UEFI_title" #: Resources/templates/Localizable.strings:120 #, no-wrap msgid "Human Interface Devices" msgstr "" #. type: "HID64UEFI_description" #: Resources/templates/Localizable.strings:121 #, no-wrap msgid "PS2/USB drivers for mouses and keyboards." msgstr "" #. type: "MemoryFix64UEFI_title" #: Resources/templates/Localizable.strings:126 #, no-wrap msgid "Memory fix drivers" msgstr "" #. type: "MemoryFix64UEFI_description" #: Resources/templates/Localizable.strings:127 #, no-wrap msgid "A collection of memory fix drivers." msgstr "" #. type: "Drivers64UEFIFV2_title" #: Resources/templates/Localizable.strings:129 #, no-wrap msgid "FileVault 2 UEFI Drivers, 64 bit" msgstr "FileVault 2 UEFI Drivers" #. type: "Drivers64UEFIFV2_description" #: Resources/templates/Localizable.strings:130 #, no-wrap msgid "Select drivers for UEFI-booting with FileVault 2." msgstr "Select drivers for UEFI-booting with FileVault 2." #. type: "Other64UEFI_title" #: Resources/templates/Localizable.strings:132 #, no-wrap msgid "Additional drivers" msgstr "" #. type: "Other64UEFI_description" #: Resources/templates/Localizable.strings:133 #, no-wrap msgid "Some times a bios UEFI may lack support for a particular protocol or some functionality." msgstr "" #. type: "AppleEvent.UEFI_description" #: Resources/templates/Localizable.strings:136 #, no-wrap msgid "Create AppleEvent protocol for FileVault2" msgstr "Create AppleEvent protocol for FileVault2." #. type: "AppleGraphicsConfig.UEFI_description" #: Resources/templates/Localizable.strings:137 #, no-wrap msgid "Create optional AppleGraphicsConfig protocol" msgstr "Create optional AppleGraphicsConfig protocol." #. type: "OcQuirks.UEFI_description" #: Resources/templates/Localizable.strings:146 #, no-wrap msgid "No more needed. Install OpenRuntime.efi only." msgstr "" #. type: "AudioDxe.UEFI_description" #: Resources/templates/Localizable.strings:147 #, no-wrap msgid "HDA driver to play Startup Sound at boot time" msgstr "" #. type: "CsmVideoDxe.UEFI_description" #: Resources/templates/Localizable.strings:148 #, no-wrap msgid "" "64bit video driver for Clover GUI allowing to choose more resolutions.\n" "It is based on CSM module in UEFI BIOS and required CSM will be enabled.\n" "Clover may not started with it and you may have wake problem in system.\n" "Use with precautions." msgstr "" "64位，Clover GUI 圖形使用者介面的顯示驅動，允許選擇更多解析度。\n" "基於 UEFI BIOS 的 CSM module 模組，CSM 必須 Enabled 啓動。\n" "Clover 可能無法啓動，可能會發生系統喚醒的問題。使用時，請注意相關問題。" #. type: "DataHubDxe.UEFI_description" #: Resources/templates/Localizable.strings:152 #, no-wrap msgid "" "This is DataHub protocol support mandatory for MacOSX.\n" "Usually it is already present but sometime it may be missed. In this case you should see warning on screen." msgstr "" "64位，此 DataHub 協定支持 Mac OS X 強制啓用。\n" "通常已啓用，但有時可能遺漏，可在螢幕 warning 中查看。" #. type: "EmuVariableUefi.UEFI_description" #: Resources/templates/Localizable.strings:154 #, no-wrap msgid "Workaround for store UEFI variables without UEFI." msgstr "" "64位，支持 Mac OS X 需要的 NVRAM 變數。\n" "大多數的 UEFI boot 使用硬體 NVRAM，但是部份少見案例需要 EmuVariableUefi。\n" "建議只在有問題時，才啓用 EmuVariableUefi。" #. type: "EnglishDxe.UEFI_description" #: Resources/templates/Localizable.strings:155 #, no-wrap msgid "Support for UnicodeCollation protocol used by EFI Shell if it missed in UEFI." msgstr "Support for UnicodeCollation protocol used by EFI Shell if it missed in UEFI." #. type: "Fat.UEFI_description" #: Resources/templates/Localizable.strings:156 #, no-wrap msgid "FAT filesystem driver." msgstr "FAT filesystem driver." #. type: "HashServiceFix.UEFI_description" #: Resources/templates/Localizable.strings:159 #, no-wrap msgid "Fix Hash support if absent in native UEFI BIOS" msgstr "Fix Hash support if absent in native UEFI BIOS." #. type: "HFSPlus.UEFI_description" #: Resources/templates/Localizable.strings:160 #, no-wrap msgid "Alternate HFS+ filesystem driver." msgstr "Alternate HFS+ filesystem driver." #. type: "NvmExpressDxe.UEFI_description" #: Resources/templates/Localizable.strings:161 #, no-wrap msgid "Driver for support NVM Express devices." msgstr "Driver for support NVM Express devices." #. type: "OsxAptioFix3Drv.UEFI_description" #: Resources/templates/Localizable.strings:162 #, no-wrap msgid "Alternate driver (v3) to fix Memory problems on UEFI firmware." msgstr "Alternate driver (v3) to fix Memory problems on UEFI firmware. Do not use with other AptioFix together." #. type: "OsxAptioFixDrv.UEFI_description" #: Resources/templates/Localizable.strings:163 #, no-wrap msgid "Old 64bit driver to fix Memory problems on UEFI firmware such as AMI Aptio" msgstr "Old 64-bits Driver to fix Memory problems on UEFI firmware such as AMI Aptio. Do not use with other AptioFix together." #. type: "OsxFatBinaryDrv.UEFI_description" #: Resources/templates/Localizable.strings:164 #, no-wrap msgid "Driver for support FAT Binary executables for OS X 10.9 and older." msgstr "Driver for support FAT Binary executables for OS X 10.9 and older." #. type: "OsxLowMemFixDrv.UEFI_description" #: Resources/templates/Localizable.strings:165 #, no-wrap msgid "Simplified variant of OsxAptioFixDrv, 64bit (do not use both together)" msgstr "" "64位，提供 UEFI 韌體的記憶體問題修正，如 AMI Aptio 等。\n" "為 OsxAptioFixDrv 的簡化版本，請勿與 OsxAptioFixDrv 同時使用。" #. type: "PartitionDxe.UEFI_description" #: Resources/templates/Localizable.strings:166 #, no-wrap msgid "64bit driver to support non-usual partition maps such as: hybrid GPT/MBR or Apple Partition Map." msgstr "64位，支持非常態的分割區配置，如 hybrid GPT/MBR 或 Apple Partition Map。" #. type: "Ps2MouseDxe.UEFI_description" #: Resources/templates/Localizable.strings:167 #, no-wrap msgid "PS/2 mouse driver, 64bit" msgstr "64位，PS/2 滑鼠驅動。" #. type: "UsbKbDxe.UEFI_description" #: Resources/templates/Localizable.strings:169 #, no-wrap msgid "Keyboard driver for boot UI support" msgstr "Keyboard driver for boot UI support." #. type: "UsbMouseDxe.UEFI_description" #: Resources/templates/Localizable.strings:170 #, no-wrap msgid "USB mouse driver, 64bit" msgstr "64位，USB 滑鼠驅動。" #. type: "VBoxExt2.UEFI_description" #: Resources/templates/Localizable.strings:171 #, no-wrap msgid "ext2/3 filesystem driver from virtualbox, 64bit" msgstr "64位，來自 Virtualbox 的 ext2/3 檔案系統驅動。" #. type: "VBoxExt4.UEFI_description" #: Resources/templates/Localizable.strings:172 #, no-wrap msgid "ext4 filesystem driver from virtualbox, 64bit" msgstr "64位，來自 Virtualbox 的 ext4 檔案系統驅動。" #. type: "VBoxHfs.UEFI_description" #: Resources/templates/Localizable.strings:173 #, no-wrap msgid "HFS+ filesystem driver." msgstr "HFS+ filesystem driver." #. type: "VBoxIso9600.UEFI_description" #: Resources/templates/Localizable.strings:174 #, no-wrap msgid "ISO 9600 filesystem driver." msgstr "ISO 9600 filesystem driver." #. type: "Themes_title" #: Resources/templates/Localizable.strings:179 #, no-wrap msgid "Themes" msgstr "開機主題" #. type: "Themes_description" #: Resources/templates/Localizable.strings:180 #, no-wrap msgid "Select to install themes." msgstr "選擇安裝，開機時，顯示的背景主題。" #. type: "BGM_title" #: Resources/templates/Localizable.strings:182 #, no-wrap msgid "Black_Green_Moody" msgstr "BlackGreenMoody" #. type: "BGM_description" #: Resources/templates/Localizable.strings:183 #, no-wrap msgid "" "BGM (Black Green and Moody) theme from Blackosx,\n" "Install to /EFI/CLOVER/themes/BGM" msgstr "" "選擇安裝來自 Blackosx 的 BlackGreenMoody 主題。\n" "安裝位置 /EFI/CLOVER/themes/BGM。" #. type: "embedded_title" #: Resources/templates/Localizable.strings:186 #, no-wrap msgid "embedded" msgstr "Embedded" #. type: "embedded_description" #: Resources/templates/Localizable.strings:187 #, fuzzy, no-wrap #| msgid "" #| "embedded theme from Blackosx,\n" #| "Install to /EFI/CLOVER/themes/embedded" msgid "" "embedded theme from Clovy,\n" "Install to /EFI/CLOVER/themes/embedded" msgstr "" "選擇安裝來自 Blackosx 的 BlackGreen 主題。\n" "安裝位置 /EFI/CLOVER/themes/black_green。" #. type: "metal_title" #: Resources/templates/Localizable.strings:190 #, no-wrap msgid "metal" msgstr "Metal" #. type: "metal_description" #: Resources/templates/Localizable.strings:191 #, no-wrap msgid "" "The original metal theme from Slice,\n" "Install to /EFI/CLOVER/themes/metal" msgstr "" "選擇安裝來自 Slice 的原始 Metal 主題。\n" "安裝位置 /EFI/CLOVER/themes/metal。" #. type: "cesium_title" #: Resources/templates/Localizable.strings:194 #, no-wrap msgid "cesium" msgstr "" #. type: "cesium_description" #: Resources/templates/Localizable.strings:195 #, fuzzy, no-wrap #| msgid "" #| "The original metal theme from Slice,\n" #| "Install to /EFI/CLOVER/themes/metal" msgid "" "Vector SVG theme from Slice,\n" "Install to /EFI/CLOVER/themes/cesium" msgstr "" "選擇安裝來自 Slice 的原始 Metal 主題。\n" "安裝位置 /EFI/CLOVER/themes/metal。" #. type: "clovy_title" #: Resources/templates/Localizable.strings:198 #, fuzzy, no-wrap #| msgid "Clover" msgid "Clovy" msgstr "Clover" #. type: "clovy_description" #: Resources/templates/Localizable.strings:199 #, fuzzy, no-wrap #| msgid "" #| "The original metal theme from Slice,\n" #| "Install to /EFI/CLOVER/themes/metal" msgid "" "Vector SVG theme from Clovy,\n" "Install to /EFI/CLOVER/themes/Clovy" msgstr "" "選擇安裝來自 Slice 的原始 Metal 主題。\n" "安裝位置 /EFI/CLOVER/themes/metal。" #. type: "random_title" #: Resources/templates/Localizable.strings:202 #, no-wrap msgid "random" msgstr "Random" #. type: "random_description" #: Resources/templates/Localizable.strings:203 #, fuzzy, no-wrap #| msgid "" #| "random theme from Slice,\n" #| "Install to /EFI/CLOVER/themes/random choose a theme from others" msgid "" "random theme,\n" "Install to /EFI/CLOVER/themes/random choose a theme from others" msgstr "" "選擇安裝來自 dwm 的 Orange 主題。\n" "安裝位置 /EFI/CLOVER/themes/orange。" #. type: "steampunkblack_title" #: Resources/templates/Localizable.strings:206 #, no-wrap msgid "steampunkblack" msgstr "SteamPunk Black" #. type: "steampunkblack_description" #: Resources/templates/Localizable.strings:207 #, no-wrap msgid "" "steampunkblack theme from medik,\n" "Install to /EFI/CLOVER/themes/steampunkblack" msgstr "" "選擇安裝來自 Bijo 的 BootCamp 主題。\n" "安裝位置 /EFI/CLOVER/themes/bootcamp。" #. type: "CloverThemeManager_title" #: Resources/templates/Localizable.strings:210 #, no-wrap msgid "CloverThemeManager.app" msgstr "Clover 主題" #. type: "CloverThemeManager_description" #: Resources/templates/Localizable.strings:211 #, fuzzy, no-wrap #| msgid "" #| "CloverThemeManager.app by blackosx,\n" #| "keeps your Themes up to date, remove or install them by choosing from a wide selection.\n" #| "Install to /Applications" msgid "" "CloverThemeManager.app by blackosx,\n" "//keeps your Themes up to date, remove or install them by choosing from a wide selection.\n" "//Install to /Applications" msgstr "" "CloverThemeManager.app by blackosx keeps your Themes up to date, remove or install them by choosing from a wide selection.\n" "Install to /Applications" #. type: "BootLoaderChooser_title" #: Resources/templates/Localizable.strings:218 #, fuzzy, no-wrap #| msgid "Bootloader" msgid "BootLoaderChooser" msgstr "Bootloader" #. type: "BootLoaderChooser_description" #: Resources/templates/Localizable.strings:219 #, no-wrap msgid "" "BootLoaderChooser by jief,\n" "This tool is a menu that allows you to choose which bootloader you want to load.\n" "Will replace your BOOTX64.efi, you can choose between several bootloader versions.\n" "The first time, you'll get the menu. Choose one bootloader.\n" "The next times, it'll immediately load the bootloader you chose before.\n" "When you need the menu back, just boot your computer with a key pressed.\n" "INSTALL ONLY FROM BUILDME !!!\n" "INSTALL ONLY IF YOU KNOW WHAT YOU ARE DOING !!!\n" "More infos https://github.com/jief666/BootloaderChooser. " msgstr "" #. type: "CloverConfigPlistValidator_title" #: Resources/templates/Localizable.strings:232 #, no-wrap msgid "CloverConfigPlistValidator" msgstr "" #. type: "CloverConfigPlistValidator_description" #: Resources/templates/Localizable.strings:233 #, no-wrap msgid "" "CloverConfigPlistValidator by jief,\n" "//Verify sanity of your config.plist keeps it clean and up to date.\n" "//Installs to /usr/local/bin and will be available as 'ccpv' " msgstr "" #. type: "rc.scripts.on.target_title" #: Resources/templates/Localizable.strings:240 #, no-wrap msgid "Install RC scripts on target volume" msgstr "安裝 RC scripts 到目標磁區" #. type: "rc.scripts.on.target_description" #: Resources/templates/Localizable.strings:241 #, no-wrap msgid "" "Install all RC scripts on target volume.\n" "The target volume must be a bootable OSX system volume." msgstr "" "安裝全部 RC scripts 到目標磁區。\n" "目標磁區必須是可開機的 OSX 磁區。" #. type: "rc.scripts.on.all.volumes_title" #: Resources/templates/Localizable.strings:243 #, no-wrap msgid "Install all RC scripts on all other bootable OSX volumes" msgstr "安裝全部 RC scripts 到全部可開機的 OSX 磁區" #. type: "rc.scripts.on.all.volumes_description" #: Resources/templates/Localizable.strings:244 #, no-wrap msgid "Install all RC scripts on all internal bootable OSX volumes other than the target volume." msgstr "安裝全部 RC scripts 到全部內置可開機的 OSX 磁區。" #. type: "OptionalRCScripts" #: Resources/templates/Localizable.strings:245 #, no-wrap msgid "Optional RC Scripts" msgstr "選擇安裝 RC Scripts" #. type: "disable_sleep_proxy_client_title" #: Resources/templates/Localizable.strings:246 #, no-wrap msgid "Disable sleep proxy client" msgstr "Disable sleep proxy client" #. type: "disable_sleep_proxy_client_description" #: Resources/templates/Localizable.strings:247 #, no-wrap msgid "Disable the mDNSResponder sleep proxy client service. This will prevent the system waking from sleep every hours" msgstr "停用 mDNSResponder 休眠 proxy client 服務，可以避免系統休眠時，每小時自動喚醒。" #. type: "CloverPrefpane_title" #: Resources/templates/Localizable.strings:252 #, no-wrap msgid "Install Clover Preference Pane" msgstr "安裝 Clover 系統偏好設定面板" #. type: "CloverPrefpane_description" #: Resources/templates/Localizable.strings:253 #, no-wrap msgid "" "Install Clover Preference Pane on target volume.\n" "Include CloverUpdater that can notify you about Clover updates." msgstr "" "安裝 Clover 系統偏好設定面板到選擇磁區。\n" "包含可提醒 Clover 更新訊息的 Clover 更新軟體。" #. type: "371.title" #: ../CloverUpdater/CloverUpdater.strings:1 #: ../CloverUpdater/CloverUpdater.strings:2 #: ../CloverUpdater/CloverUpdater.strings:5 #, no-wrap msgid "CloverUpdater" msgstr "CloverUpdater" #. type: "58.title" #: ../CloverUpdater/CloverUpdater.strings:3 #, no-wrap msgid "About CloverUpdater" msgstr "關於 Clover 更新軟體" #. type: "136.title" #: ../CloverUpdater/CloverUpdater.strings:4 #, no-wrap msgid "Quit CloverUpdater" msgstr "離開 Clover 更新軟體" #. type: "534.title" #: ../CloverUpdater/CloverUpdater.strings:6 #, no-wrap msgid "Current local Clover revision:" msgstr "目前本地 Clover 修訂版本：" #. type: "538.title" #: ../CloverUpdater/CloverUpdater.strings:7 #, no-wrap msgid "Latest update revision:" msgstr "最近更新之修訂版本：" #. type: "542.title" #: ../CloverUpdater/CloverUpdater.strings:8 #, no-wrap msgid "Do you want to update ?" msgstr "您想要更新嗎？" #. type: "546.title" #: ../CloverUpdater/CloverUpdater.strings:9 #, no-wrap msgid "Not now" msgstr "暫時不要" #. type: "548.title" #: ../CloverUpdater/CloverUpdater.strings:10 #, no-wrap msgid "Update" msgstr "更新" #. type: "585.title" #: ../CloverUpdater/CloverUpdater.strings:11 #, no-wrap msgid "No update available !" msgstr "沒有可用的更新" #. type: "586.title" #: ../CloverUpdater/CloverUpdater.strings:12 #, no-wrap msgid "Ok" msgstr "確定" #. type: "Never" #: ../CloverPrefpane/CloverPrefpane.strings:2 #: ../CloverPrefpane/Localizable.strings:5 #, no-wrap msgid "Never" msgstr "Never" #. type: "205.title" #: ../CloverPrefpane/CloverPrefpane.strings:3 #, no-wrap msgid "Daily" msgstr "每日" #. type: "206.title" #: ../CloverPrefpane/CloverPrefpane.strings:4 #, no-wrap msgid "Weekly" msgstr "每週" #. type: "217.title" #: ../CloverPrefpane/CloverPrefpane.strings:5 #, no-wrap msgid "Hourly" msgstr "每小時" #. type: "239.title" #: ../CloverPrefpane/CloverPrefpane.strings:6 #, no-wrap msgid "Monthly" msgstr "每月" #. type: "241.title" #: ../CloverPrefpane/CloverPrefpane.strings:7 #, no-wrap msgid "Check for Updates" msgstr "檢查更新" #. type: "243.title" #: ../CloverPrefpane/CloverPrefpane.strings:8 #, no-wrap msgid "Schedule Check Updates Every:" msgstr "檢查更新排程：" #. type: "248.title" #: ../CloverPrefpane/CloverPrefpane.strings:9 #, no-wrap msgid "Last check:" msgstr "最近檢查：" #. type: "258.title" #: ../CloverPrefpane/CloverPrefpane.strings:10 #, no-wrap msgid "Check Now" msgstr "立刻檢查" #. type: "262.title" #: ../CloverPrefpane/CloverPrefpane.strings:11 #, no-wrap msgid "Copyright (c) 2013 JrCs, kozlek\\nAll Rights Reserved" msgstr "" "版權所有 (C) 2013 JrCs, kozlek\n" "保留所有權利" #. type: "294.label" #: ../CloverPrefpane/CloverPrefpane.strings:12 #, no-wrap msgid "NVRam Variables" msgstr "NVRam 變數" #. type: "295.label" #: ../CloverPrefpane/CloverPrefpane.strings:13 #, no-wrap msgid "General" msgstr "一般設定" #. type: "298.title" #: ../CloverPrefpane/CloverPrefpane.strings:14 #, no-wrap msgid "Revisions" msgstr "修訂版本" #. type: "300.title" #: ../CloverPrefpane/CloverPrefpane.strings:15 #, no-wrap msgid "Current booted revision:" msgstr "目前啓動的修訂版本：" #. type: "302.title" #: ../CloverPrefpane/CloverPrefpane.strings:16 #, no-wrap msgid "Last installed revision:" msgstr "最近安裝的修訂版本：" #. type: "309.title" #: ../CloverPrefpane/CloverPrefpane.strings:17 #, no-wrap msgid "Log Files" msgstr "紀錄檔案" #. type: "314.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:18 #, no-wrap msgid "Number of lines of history to keep in CloverEFI/system.log file in addition to the current CloverEFI/boot.log contents" msgstr "現有 CloverEFI/boot.log 內容以外，保存在 CloverEFI/system.log 的行數歷史紀錄" #. type: "327.title" #: ../CloverPrefpane/CloverPrefpane.strings:19 #, no-wrap msgid "Advanced Configurations" msgstr "進階組態設定" #. type: "332.title" #: ../CloverPrefpane/CloverPrefpane.strings:20 #, no-wrap msgid "Force mount selected ESP at startup:" msgstr "啓動時強制裝載選定的 ESP 磁區:" #. type: "339.title" #: ../CloverPrefpane/CloverPrefpane.strings:21 #, no-wrap msgid "Save NVRAM contents to disk:" msgstr "儲存 NVRAM 內容到磁區:" #. type: "374.label" #: ../CloverPrefpane/CloverPrefpane.strings:22 #, no-wrap msgid "Theme" msgstr "開機主題" #. type: "392.title" #: ../CloverPrefpane/CloverPrefpane.strings:23 #, no-wrap msgid "Clover Theme" msgstr "Clover 主題" #. type: "399.title" #: ../CloverPrefpane/CloverPrefpane.strings:24 #, no-wrap msgid "Author:" msgstr "作者：" #. type: "401.title" #: ../CloverPrefpane/CloverPrefpane.strings:25 #, no-wrap msgid "Year:" msgstr "年份：" #. type: "423.title" #: ../CloverPrefpane/CloverPrefpane.strings:26 #, no-wrap msgid "To see previews of themes you must select the path to the EFI folder." msgstr "必須選擇 EFI 資料夾路徑，才能預覽開機主題" #. type: "426.title" #: ../CloverPrefpane/CloverPrefpane.strings:27 #, no-wrap msgid "Theme:" msgstr "開機主題" #. type: "429.title" #: ../CloverPrefpane/CloverPrefpane.strings:28 #, no-wrap msgid "No Preview Available" msgstr "沒有可用的預覽" #. type: "431.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:29 #, no-wrap msgid "Mounting the ESP partition on boot" msgstr "開機時，裝載 ESP 分割區。" #. type: "452.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:30 #, no-wrap msgid "Where to save the nvram contents" msgstr "儲存 nvram 內容的位置" #. type: "483.title" #: ../CloverPrefpane/CloverPrefpane.strings:31 #, fuzzy, no-wrap #| msgid "Number of history boot log lines to keep:" msgid "Number of history boot log lines to keep:" msgstr "保存的歷史開機紀錄行數:" #. type: "522.title" #: ../CloverPrefpane/CloverPrefpane.strings:32 #, no-wrap msgid "Create timestamp CloverEFI/boot.log file on every boot" msgstr "每次開機時建立 CloverEFI/boot.log 檔案的時間戳" #. type: "525.title" #: ../CloverPrefpane/CloverPrefpane.strings:33 #, no-wrap msgid "Number of timestamp boot.log files to keep:" msgstr "保存時間戳 boot.log 檔案的數量:" #. type: "555.title" #: ../CloverPrefpane/CloverPrefpane.strings:34 #, no-wrap msgid "Backup" msgstr "備份" #. type: "557.title" #: ../CloverPrefpane/CloverPrefpane.strings:35 #, no-wrap msgid "On install backup EFI folder to destination volume" msgstr "安裝時備份 EFI 資料夾到目標磁區" #. type: "560.title" #: ../CloverPrefpane/CloverPrefpane.strings:36 #, no-wrap msgid "Number of backups to keep:" msgstr "保存的備份數量:" #. type: "567.title" #: ../CloverPrefpane/CloverPrefpane.strings:37 #, no-wrap msgid "EFI Folder path" msgstr "EFI 資料夾路徑：" #. type: "Auto" #: ../CloverPrefpane/CloverPrefpane.strings:38 #: ../CloverPrefpane/Localizable.strings:2 #, no-wrap msgid "Auto" msgstr "Auto" #. type: "No" #: ../CloverPrefpane/CloverPrefpane.strings:39 #: ../CloverPrefpane/Localizable.strings:6 #, no-wrap msgid "No" msgstr "No" #. type: "Always" #: ../CloverPrefpane/Localizable.strings:1 #, no-wrap msgid "Always" msgstr "永遠" #. type: "Boot Volume" #: ../CloverPrefpane/Localizable.strings:3 #, no-wrap msgid "Boot Volume" msgstr "開機磁區" #. type: "ESP on [%@] %@" #: ../CloverPrefpane/Localizable.strings:4 #, no-wrap msgid "ESP on [%1$@] %2$@" msgstr "在 [%1$@] %2$@ 的ESP" #. type: "No description available" #: ../CloverPrefpane/Localizable.strings:7 #, no-wrap msgid "No description available" msgstr "沒有描述" #. type: "Select the EFI directory" #: ../CloverPrefpane/Localizable.strings:8 #, no-wrap msgid "Select the EFI directory" msgstr "選擇 EFI 資料夾" #. type: "Set EFI directory" #: ../CloverPrefpane/Localizable.strings:9 #, no-wrap msgid "Set EFI directory" msgstr "設定 EFI 資料夾" #. type: "Unknown" #: ../CloverPrefpane/Localizable.strings:10 #, no-wrap msgid "Unknown" msgstr "未知" #~ msgid "" #~ "Preferred 64bit driver to fix Memory problems on UEFI firmware such as " #~ "AMI Aptio" #~ msgstr "64位，提供 UEFI 韌體的記憶體問題修正，如 AMI Aptio 等。" #~ msgid "Clover v2" #~ msgstr "Clover v2" #~ msgid "http://sourceforge.net/projects/cloverefiboot/" #~ msgstr "http://sourceforge.net/projects/cloverefiboot/" #~ msgid "Install & Start 32bit boot first" #~ msgstr "安裝 boot 32位優先啟動" #~ msgid "" #~ "Install boot files and set to start 32bit first.\n" #~ "Default boot to boot = Clover EFI 32bit. You can..\n" #~ "Press key 1 to boot1 = Chameleon boot,\n" #~ "Press key 3 to boot3 = Clover EFI 32bit boot,\n" #~ "Press key 6 to boot6 = Clover EFI 64bit boot." #~ msgstr "" #~ "安裝 32位+64位 boot 文件，並優先啟用 32位系統。\n" #~ "預設啟動 boot = Clover boot 32位，可在 test done 的 2 秒內，\n" #~ "按 1 選 boot1 = 變色龍 boot，\n" #~ "按 3 選 boot3 = Clover boot 32位，\n" #~ "按 6 選 boot6 = Clover boot 64位。" #~ msgid "CloverEFI 32-bits" #~ msgstr "CloverEFI 32-bits" #~ msgid "PS/2 keyboard driver, 32bit" #~ msgstr "32位，PS/2 鍵盤驅動。" #~ msgid "PS/2 trackpad driver, 32bit" #~ msgstr "32位，PS/2 觸控板驅動。" #~ msgid "PS/2 mouse driver, 32bit" #~ msgstr "32位，PS/2 滑鼠驅動。" #~ msgid "USB mouse driver, 32bit" #~ msgstr "32位，USB 滑鼠驅動。" #~ msgid "ext2/3 filesystem driver from virtualbox, 32bit" #~ msgstr "32位，來自 Virtualbox 的 ext2/3 檔案系統驅動。" #~ msgid "ext4 filesystem driver from virtualbox, 32bit" #~ msgstr "32位，來自 Virtualbox 的 ext4 檔案系統驅動。" #~ msgid "USB 3.0 driver, 32bit" #~ msgstr "32位，XHCI USB 3.0 驅動。" #~ msgid "Alternate driver (v2) to fix Memory problems on UEFI firmware." #~ msgstr "" #~ "Alternate driver (v2) to fix Memory problems on UEFI firmware. Do not use " #~ "with other AptioFix together."