#: Resources/templates/Conclusion.html:20 msgid "r%CLOVERREVISION%" msgstr "r%CLOVERREVISION%" #. type: Content of:

#: Resources/templates/Conclusion.html:22 msgid "Installation Complete!" msgstr "安装完成 !" #. type: "MakingRootRW" #: Resources/templates/Localizable.strings:4 #, no-wrap msgid "" "Clover wants to make the root file system read-write.\n" "The change is temporary until the next reboot" msgstr "" "Clover 想要开启根文件系统的可读写权限。\n" "此项修改是临时的, 下一次重启后失效" #. type: "GoToFailRootRW" #: Resources/templates/Localizable.strings:6 #, no-wrap msgid "Cannot install without ensuring the file system is read-write" msgstr "无法安装因为不能保证文件系统是否有读写权限" #. type: "UEFI.only_title" #: Resources/templates/Localizable.strings:10 #, no-wrap msgid "Install for UEFI booting only" msgstr "仅安装 UEFI 启动版本" #. type: "UEFI.only_description" #: Resources/templates/Localizable.strings:11 #, no-wrap msgid "Install Clover to be used with UEFI motherboards only." msgstr "仅安装 UEFI 主板专用的 Clover 版本。" #. type: "Target.ESP_title" #: Resources/templates/Localizable.strings:16 #, no-wrap msgid "Install Clover in the ESP" msgstr "安装 Clover 到 ESP 系统分区" #. type: "Target.ESP_description" #: Resources/templates/Localizable.strings:17 #, no-wrap msgid "" "Install Clover in the ESP (EFI System Partition) of the target volume\n" "\n" "Need to format ESP as Fat32 on Mac first.\n" "\n" "For Fat32 use commands like:\n" "diskutil list\n" "newfs_msdos -v EFI -F 32 /dev/rdisk9s1" msgstr "" "安装 Clover 到目标磁区的 ESP (EFI) 系统分区\n" "\n" "需要在 Mac 下, 先将 EFI 系统区格式化为 Fat32 格式。\n" "\n" "参考 Fat32 手动格式化指令:\n" "diskutil list\n" "newfs_msdos -v EFI -F 32 /dev/rdisk9s1" #. type: "Bootloader_title" #: Resources/templates/Localizable.strings:29 #, no-wrap msgid "Bootloader" msgstr "引导器" #. type: "Bootloader_description" #: Resources/templates/Localizable.strings:30 #, no-wrap msgid "" "Clover EFI requires three essential files. (in simple terms)\n" "boot0 (On the drive's MBR) responsible for loading boot1.\n" "boot1 (On the partition's boot-sector) to finding boot2.\n" "boot2 (On the partition's root directory) for loading /EFI/CLOVER/CLOVERIA32.efi or CLOVERX64.efi, and kernel etc." msgstr "" "简而言之，Clover EFI 需要三个必要的文件。\n" "boot0 (在硬盘的 MBR) 负责载入 boot1。\n" "boot1 (在分区的开机磁区 boot-sector) 搜寻 boot2。\n" "boot2 (在分区的根目录) 载入 /EFI/CLOVER/CLOVERIA32.efi 或 CLOVERX64.efi 及系统核心等等。" #. type: "boot0af_title" #: Resources/templates/Localizable.strings:35 #, no-wrap msgid "Install boot0af in MBR" msgstr "安装 boot0af 进 MBR" #. type: "boot0af_description" #: Resources/templates/Localizable.strings:36 #, no-wrap msgid "" "Used for BIOS booting on BIOS motherboards.\n" "boot0af (boot0 Active First) bootloader try to boot the active partition defined in MBR. If there is no active partition, it will try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature.\n" "This choice will setup selected HFS/Fat32 partition to be active." msgstr "" "BIOS 主板之 BIOS 启动专用。\n" "boot0af (优先激活 boot0) 优先引导 MBR 的激活分区, 如果没有激活分区, 将引导第一个含有效 PBR 签名的 EFI/FAT32/HFS 分区 (优先引导MBR，其次引导GPT)。\n" "本安装将会设置 HFS 及 Fat32 安装分区为激活分区。" #. type: "boot0ss_title" #: Resources/templates/Localizable.strings:40 #, no-wrap msgid "Install boot0ss in MBR" msgstr "安装 boot0ss 进 MBR" #. type: "boot0ss_description" #: Resources/templates/Localizable.strings:41 #, no-wrap msgid "" "Used for BIOS booting on BIOS motherboards.\n" "boot0ss (boot0 Signature Scanning) bootloader try to boot the first EFI/FAT32/HFS partition (defined in the MBR and then the GPT) with a valid PBR signature. If no partition is found it will try to boot the active partition defined in MBR.\n" "This bootloader is a good choice when you have Windows installed on the same disk because Windows wants to have its partition active.\n" "This choice will not activate any partition in MBR." msgstr "" "BIOS 主板之 BIOS 启动专用。\n" "boot0ss (boot0 签名扫描) 引导器优先引导第一个含有效 PBR 签名的 EFI/FAT32/HFS 分区(优先引导MBR, 其次引导GPT), 如果没有找到分区，将引导 MBR 的激活分区。\n" "本引导器是推荐选择, 当你已经安装了 Windows 在相同磁盘。因为 Windows 想让它的分区成为激活分区。\n" "本安装将不会设置任何 MBR 里的分区为激活分区。" #. type: "bootNo_title" #: Resources/templates/Localizable.strings:46 #, no-wrap msgid "Don't update MBR and PBR sectors" msgstr "不更新 MBR 及 PBR 磁区" #. type: "bootNo_description" #: Resources/templates/Localizable.strings:47 #, no-wrap msgid "" "Don't install any bootloader (boot0X, boot1X).\n" "Usefull for UEFI motherboards that don't need bootloader files.\n" "Can also be use if you don't want to upgrade MBR or PBR sectors." msgstr "" "不安装任何引导文件 (boot0X, boot1X)。\n" "适用于不需要任何引导文件的 UEFI 主板。\n" "适用于不需要更新 MBR 及 PBR 磁区。" #. type: "AltBoot_title" #: Resources/templates/Localizable.strings:51 #, no-wrap msgid "Use alternative booting PBR" msgstr "安装 PBR 的多重开机选项" #. type: "AltBoot_description" #: Resources/templates/Localizable.strings:52 #, no-wrap msgid "" "Install alternative booting PBR with choice of boot with a key pressed.\n" "File to boot = boot{keypressed}" msgstr "" "安装 PBR 的多重开机选项，boot1=变色龙引导，boot6=64位 Clover 引导。\n" "可设定开机 boot = boot{按键} 进行多重开机设置。" #. type: "boot64_title" #: Resources/templates/Localizable.strings:55 #, no-wrap msgid "Install & Start 64bit boot first" msgstr "安装 64位版本引导并让它优先启动" #. type: "boot64_description" #: Resources/templates/Localizable.strings:56 #, no-wrap msgid "" "Install boot files and set to start 64bit first.\n" "Default boot to boot = Clover EFI 64bit. You can..\n" "Press key 1 to boot1 = Chameleon boot,\n" "Press key 3 to boot3 = Clover EFI 32bit boot,\n" "Press key 6 to boot6 = Clover EFI 64bit boot." msgstr "" "安装 32位+64位引导文件，并优先启用 64位版本。\n" "默认启动引导 = Clover 引导 64位版本。你可以…\n" "按 1 选 boot1 = 变色龙引导,\n" "按 3 选 boot3 = Clover 引导 32位版本,\n" "按 6 选 boot6 = Clover 引导 64位版本。" #. type: "CloverEFI_title" #: Resources/templates/Localizable.strings:65 #, no-wrap msgid "CloverEFI" msgstr "CloverEFI" #. type: "CloverEFI_description" #: Resources/templates/Localizable.strings:66 #, no-wrap msgid "Select the version of CloverEFI to install." msgstr "选择要安装的 CloverEFI 版本。" #. type: "cloverEFI.64.sata_title" #: Resources/templates/Localizable.strings:67 #, no-wrap msgid "CloverEFI 64-bits SATA" msgstr "CloverEFI 64位版本 SATA" #. type: "cloverEFI.64.sata_description" #: Resources/templates/Localizable.strings:68 #, no-wrap msgid "CloverEFI 64-bits using SATA to access drives" msgstr "CloverEFI 64位版本, 使用 SATA 模式存取硬盘" #. type: "cloverEFI.64.blockio_title" #: Resources/templates/Localizable.strings:69 #, no-wrap msgid "CloverEFI 64-bits BiosBlockIO" msgstr "CloverEFI 64位版本 BiosBlockIO" #. type: "cloverEFI.64.blockio_description" #: Resources/templates/Localizable.strings:70 #, no-wrap msgid "CloverEFI 64-bits using Bios Block I/O to access drives" msgstr "CloverEFI 64位版本, 使用 Bios Block I/O 模式存取硬盘" #. type: "cloverEFI.64.blockio2_title" #: Resources/templates/Localizable.strings:71 #, no-wrap msgid "CloverEFI 64-bits BiosBlockIO for NVIDIA NForce MCP79" msgstr "CloverEFI 64位版本, 使用 BiosBlockIO 模式于 NVIDIA NForce MCP79" #. type: "cloverEFI.64.blockio2_description" #: Resources/templates/Localizable.strings:72 #, no-wrap msgid "CloverEFI 64-bits using Bios Block I/O to access drives for chipset NVIDIA NForce MCP79" msgstr "CloverEFI 64位版本, 使用 Bios Block I/O 模式存取 NVIDIA NForce MCP79 芯片组" #. type: "off_title" #: Resources/templates/Localizable.strings:77 #, no-wrap msgid "Drivers off" msgstr "停用驱动" #. type: "off_description" #: Resources/templates/Localizable.strings:78 #, no-wrap msgid "" "Installs all available drivers in EFI/CLOVER/drivers/off/\n" "off directory isn't loaded by Clover any how and this is only helpfull if you have to use the EFI shell to copy a missing driver or replace a bad one during the boot if a need be." msgstr "" "安装所有 EFI/CLOVER/drivers/off/ 目录下可用的驱动\n" "off 目录不会被 Clover 加载并且当启动时需要, 你必须使用 EFI shell 来拷贝一个丢失的驱动或替换一个损坏的驱动。" #. type: "Drivers64_title" #: Resources/templates/Localizable.strings:81 #, no-wrap msgid "BIOS Drivers, 64 bit" msgstr "BIOS 驱动, 64位版本" #. type: "Drivers64_description" #: Resources/templates/Localizable.strings:82 #, no-wrap msgid "Select drivers for BIOS-booting." msgstr "选择 BIOS-启动的驱动。" #. type: "Recommended64UEFI_title" #: Resources/templates/Localizable.strings:84 #: Resources/templates/Localizable.strings:115 #, no-wrap msgid "Recommended drivers" msgstr "推荐驱动" #. type: "Recommended64UEFI_description" #: Resources/templates/Localizable.strings:85 #: Resources/templates/Localizable.strings:116 #, no-wrap msgid "Recommended drivers, mostly mandatory." msgstr "推荐驱动, 大多数是必要的。" #. type: "FileSystem64UEFI_title" #: Resources/templates/Localizable.strings:87 #: Resources/templates/Localizable.strings:121 #, no-wrap msgid "File System drivers" msgstr "文件系统驱动" #. type: "FileSystem64UEFI_description" #: Resources/templates/Localizable.strings:88 #: Resources/templates/Localizable.strings:122 #, no-wrap msgid "A collection of file system drivers." msgstr "文件系统驱动的集合。" #. type: "Drivers64FV2_title" #: Resources/templates/Localizable.strings:90 #, no-wrap msgid "FileVault 2 BIOS Drivers, 64 bit" msgstr "文件保险箱 BIOS 驱动, 64位版本" #. type: "Drivers64FV2_description" #: Resources/templates/Localizable.strings:91 #, no-wrap msgid "Select drivers for BIOS-booting with FileVault 2." msgstr "选择已开启文件保险箱的 BIOS-引导驱动。" #. type: "ApfsDriverLoader.UEFI_description" #: Resources/templates/Localizable.strings:93 #: Resources/templates/Localizable.strings:133 #, no-wrap msgid "64bit driver to load APFS filesystem driver from container" msgstr "加载容器里 APFS 文件系统的 64位版本驱动" #. type: "AppleImageCodec.UEFI_description" #: Resources/templates/Localizable.strings:94 #: Resources/templates/Localizable.strings:136 #, no-wrap msgid "For decode PNG and BMP images in boot UI" msgstr "解码启动界面的 PNG 和 BMP 图像" #. type: "AppleImageLoader.UEFI_description" #: Resources/templates/Localizable.strings:95 #: Resources/templates/Localizable.strings:137 #, no-wrap msgid "Secure AppleEfiFat binary driver with implementation of AppleLoadImage protocol with EfiBinary signature verification." msgstr "安全 AppleEfiFat 二进制驱动, 实施 AppleLoadImage 协议并携有 EfiBinary 签名验证。" #. type: "AppleKeyAggregator.UEFI_description" #: Resources/templates/Localizable.strings:96 #: Resources/templates/Localizable.strings:138 #, no-wrap msgid "Support for boot UI dialog for FileVault2" msgstr "支持文件保险箱开机界面的对话框" #. type: "AppleKeyFeeder.UEFI_description" #: Resources/templates/Localizable.strings:97 #: Resources/templates/Localizable.strings:139 #, no-wrap msgid "Support for PS/2 keyboard to use with FileVault2" msgstr "支持使用文件保险箱时的 PS/2 键盘" #. type: "AppleUISupport.UEFI_description" #: Resources/templates/Localizable.strings:98 #: Resources/templates/Localizable.strings:140 #, no-wrap msgid "Set of protocols for support EfiLoginUi for FileVault." msgstr "支持文件保险箱中 EfiLoginUi 的协议集。" #. type: "AppleUITheme.UEFI_description" #: Resources/templates/Localizable.strings:99 #: Resources/templates/Localizable.strings:141 #, no-wrap msgid "Create boot UI Themes support" msgstr "支持启动界面主题" #. type: "AptioInputFix.UEFI_description" #: Resources/templates/Localizable.strings:100 #: Resources/templates/Localizable.strings:142 #, no-wrap msgid "Driver to fix input problems on UEFI firmware such as AMI Aptio." msgstr "修正 UEFI 固件输入问题, 例如 AMI Aptio。" #. type: "AptioMemoryFix.UEFI_description" #: Resources/templates/Localizable.strings:101 #: Resources/templates/Localizable.strings:143 #, no-wrap msgid "Preferred 64bit driver to fix Memory problems on UEFI firmware such as AMI Aptio" msgstr "64位版本, 提供 UEFI 固件的内存问题修正, 例如 AMI Aptio" #. type: "AudioDxe_description" #: Resources/templates/Localizable.strings:102 #, no-wrap msgid "HDA driver to play Startup Sound" msgstr "HDA 驱动, 播放启动音" #. type: "FirmwareVolume.UEFI_description" #: Resources/templates/Localizable.strings:103 #: Resources/templates/Localizable.strings:154 #, no-wrap msgid "Create FirmwareVolume with cursor images" msgstr "新建含光标图像的固件宗卷" #. type: "FSInject.UEFI_description" #: Resources/templates/Localizable.strings:104 #: Resources/templates/Localizable.strings:155 #, no-wrap msgid "Provide injection of kexts from Clover folder." msgstr "提供 Clover文件夹中内核扩展的注入。" #. type: "GrubEXFAT_description" #: Resources/templates/Localizable.strings:105 #, no-wrap msgid "ExFAT filesystem driver from GRUB." msgstr "ExFAT 文件系统驱动, 来自 GRUB。" #. type: "GrubISO9660_description" #: Resources/templates/Localizable.strings:106 #, no-wrap msgid "ISO 9600 filesystem driver from GRUB." msgstr "ISO 9600 文件系统驱动, 来自 GRUB。" #. type: "GrubNTFS_description" #: Resources/templates/Localizable.strings:107 #, no-wrap msgid "NTFS filesystem driver from GRUB." msgstr "NTFS 文件系统驱动, 来自 GRUB。" #. type: "GrubUDF_description" #: Resources/templates/Localizable.strings:108 #, no-wrap msgid "UDF filesystem driver from GRUB." msgstr "UDF 文件系统驱动, 来自 GRUB。" #. type: "SMCHelper.UEFI_description" #: Resources/templates/Localizable.strings:109 #: Resources/templates/Localizable.strings:165 #, no-wrap msgid "Restore SMC keys left in nvram by FakeSMC" msgstr "恢复 FakeSMC 在 nvram 遗留的 SMC 键值" #. type: "XhciDxe_description" #: Resources/templates/Localizable.strings:110 #, no-wrap msgid "USB 3.0 driver, 64bit" msgstr "USB 3.0 驱动, 64位版本" #. type: "Drivers64UEFI_title" #: Resources/templates/Localizable.strings:112 #, no-wrap msgid "UEFI Drivers, 64 bit" msgstr "UEFI 驱动, 64位版本" #. type: "Drivers64UEFI_description" #: Resources/templates/Localizable.strings:113 #, no-wrap msgid "Select drivers for UEFI-booting." msgstr "选择 UEFI-引导的驱动。" #. type: "HID64UEFI_title" #: Resources/templates/Localizable.strings:118 #, no-wrap msgid "Human Interface Devices" msgstr "人机接口设备" #. type: "HID64UEFI_description" #: Resources/templates/Localizable.strings:119 #, no-wrap msgid "PS2/USB drivers for mouses and keyboards." msgstr "PS2/USB 驱动, 支持鼠标和键盘。" #. type: "MemoryFix64UEFI_title" #: Resources/templates/Localizable.strings:124 #, no-wrap msgid "Memory fix drivers" msgstr "内存修正驱动" #. type: "MemoryFix64UEFI_description" #: Resources/templates/Localizable.strings:125 #, no-wrap msgid "A collection of memory fix drivers." msgstr "内存修正驱动集。" #. type: "Drivers64UEFIFV2_title" #: Resources/templates/Localizable.strings:127 #, no-wrap msgid "FileVault 2 UEFI Drivers, 64 bit" msgstr "文件保险箱 UEFI 驱动, 64位版本" #. type: "Drivers64UEFIFV2_description" #: Resources/templates/Localizable.strings:128 #, no-wrap msgid "Select drivers for UEFI-booting with FileVault 2." msgstr "选择 UEFI-引导文件保险箱驱动。" #. type: "Other64UEFI_title" #: Resources/templates/Localizable.strings:130 #, no-wrap msgid "Additional drivers" msgstr "更多驱动" #. type: "Other64UEFI_description" #: Resources/templates/Localizable.strings:131 #, no-wrap msgid "Some times a bios UEFI may lack support for a particular protocol or some functionality." msgstr "有些时候, bios UEFI 会缺少对特定协议或一些功能的支持。" #. type: "AppleEvent.UEFI_description" #: Resources/templates/Localizable.strings:134 #, no-wrap msgid "Create AppleEvent protocol for FileVault2" msgstr "新建文件保险箱的 AppleEvent 协议" #. type: "AppleGraphicsConfig.UEFI_description" #: Resources/templates/Localizable.strings:135 #, no-wrap msgid "Create optional AppleGraphicsConfig protocol" msgstr "新建可选的 AppleGraphicsConfig 协议" #. type: "AudioDxe.UEFI_description" #: Resources/templates/Localizable.strings:144 #, no-wrap msgid "HDA driver to play Startup Sound at boot time" msgstr "HDA 驱动, 开机时播放启动音" #. type: "CsmVideoDxe.UEFI_description" #: Resources/templates/Localizable.strings:145 #, no-wrap msgid "" "64bit video driver for Clover GUI allowing to choose more resolutions.\n" "It is based on CSM module in UEFI BIOS and required CSM will be enabled.\n" "Clover may not started with it and you may have wake problem in system.\n" "Use with precautions." msgstr "" "64位版本视频驱动, 允许 Clover 图形界面支持更多分辨率。\n" "基于 UEFI BIOS 的 CSM 模块, 并且 CSM 必须启动。\n" "可能导致 Clover 无法启动, 也可能会发生系统唤醒相关问题。\n" "请谨慎使用。" #. type: "DataHubDxe.UEFI_description" #: Resources/templates/Localizable.strings:149 #, no-wrap msgid "" "This is DataHub protocol support mandatory for MacOSX.\n" "Usually it is already present but sometime it may be missed. In this case you should see warning on screen." msgstr "" "此驱动提供 DataHub 协议支持, MacOSX 强制启用。\n" "通常已启用, 但有时可能遗漏。可在屏幕 warning 中查看。" #. type: "EmuVariableUefi.UEFI_description" #: Resources/templates/Localizable.strings:151 #, no-wrap msgid "Workaround for store UEFI variables without UEFI." msgstr "存储非 UEFI-引导中 UEFI 变量的替代方法。" #. type: "EnglishDxe.UEFI_description" #: Resources/templates/Localizable.strings:152 #, no-wrap msgid "Support for UnicodeCollation protocol used by EFI Shell if it missed in UEFI." msgstr "支持 EFI Shell 使用的 UnicodeCollation 协议, 如果 UEFI 遗漏了它。" #. type: "Fat.UEFI_description" #: Resources/templates/Localizable.strings:153 #, no-wrap msgid "FAT filesystem driver." msgstr "FAT 文件系统驱动。" #. type: "HashServiceFix.UEFI_description" #: Resources/templates/Localizable.strings:156 #, no-wrap msgid "Fix Hash support if absent in native UEFI BIOS" msgstr "修正 Hash 的支持, 如果原生 UEFI BIOS 缺失了它" #. type: "HFSPlus.UEFI_description" #: Resources/templates/Localizable.strings:157 #, no-wrap msgid "Alternate HFS+ filesystem driver." msgstr "另外的 HFS+ 文件系统驱动。" #. type: "NvmExpressDxe.UEFI_description" #: Resources/templates/Localizable.strings:158 #, no-wrap msgid "Driver for support NVM Express devices." msgstr "支持 NVM Express 设备驱动。" #. type: "OsxAptioFix3Drv.UEFI_description" #: Resources/templates/Localizable.strings:159 #, no-wrap msgid "Alternate driver (v3) to fix Memory problems on UEFI firmware." msgstr "另外的修正 UEFI 固件内存问题驱动 (v3)" #. type: "OsxAptioFixDrv.UEFI_description" #: Resources/templates/Localizable.strings:160 #, no-wrap msgid "Old 64bit driver to fix Memory problems on UEFI firmware such as AMI Aptio" msgstr "老版 64位版本驱动, 修正 UEFI 固件内存问题, 例如 AMI Aptio" #. type: "OsxFatBinaryDrv.UEFI_description" #: Resources/templates/Localizable.strings:161 #, no-wrap msgid "Driver for support FAT Binary executables for OS X 10.9 and older." msgstr "支持 OSX 10.9 及以后的 FAT 二进制可执行文件。" #. type: "OsxLowMemFixDrv.UEFI_description" #: Resources/templates/Localizable.strings:162 #, no-wrap msgid "Simplified variant of OsxAptioFixDrv, 64bit (do not use both together)" msgstr "" "64位版本, 提供 UEFI 固件内存问题修正, 例如 AMI Aptio。\n" "为 OsxAptioFixDrv 的简化版本, 请勿与 OsxAptioFixDrv 同时使用。" #. type: "PartitionDxe.UEFI_description" #: Resources/templates/Localizable.strings:163 #, no-wrap msgid "64bit driver to support non-usual partition maps such as: hybrid GPT/MBR or Apple Partition Map." msgstr "64位版本驱动, 支持非常态的分区图, 例如混合 GPT/MBR 或 Apple 分区图。" #. type: "Ps2MouseDxe.UEFI_description" #: Resources/templates/Localizable.strings:164 #, no-wrap msgid "PS/2 mouse driver, 64bit" msgstr "64位版本, PS/2 鼠标驱动" #. type: "UsbKbDxe.UEFI_description" #: Resources/templates/Localizable.strings:166 #, no-wrap msgid "Keyboard driver for boot UI support" msgstr "键盘驱动, 支持启动界面" #. type: "UsbMouseDxe.UEFI_description" #: Resources/templates/Localizable.strings:167 #, no-wrap msgid "USB mouse driver, 64bit" msgstr "64位版本, USB 鼠标驱动" #. type: "VBoxExt2.UEFI_description" #: Resources/templates/Localizable.strings:168 #, no-wrap msgid "ext2/3 filesystem driver from virtualbox, 64bit" msgstr "64位版本, 来自 virtualbox 的 ext2/3 文件系统驱动" #. type: "VBoxExt4.UEFI_description" #: Resources/templates/Localizable.strings:169 #, no-wrap msgid "ext4 filesystem driver from virtualbox, 64bit" msgstr "64位版本, 来自 virtualbox 的 ext4 文件系统驱动" #. type: "VBoxHfs.UEFI_description" #: Resources/templates/Localizable.strings:170 #, no-wrap msgid "HFS+ filesystem driver." msgstr "HFS+ 文件系统驱动。" #. type: "VBoxIso9600.UEFI_description" #: Resources/templates/Localizable.strings:171 #, no-wrap msgid "ISO 9600 filesystem driver." msgstr "ISO 9600 文件系统驱动。" #. type: "Themes_title" #: Resources/templates/Localizable.strings:176 #, no-wrap msgid "Themes" msgstr "开机主题" #. type: "Themes_description" #: Resources/templates/Localizable.strings:177 #, no-wrap msgid "Select to install themes." msgstr "选择来安装开机主题。" #. type: "BGM_title" #: Resources/templates/Localizable.strings:179 #, no-wrap msgid "Black_Green_Moody" msgstr "Black_Green_Moody" #. type: "BGM_description" #: Resources/templates/Localizable.strings:180 #, no-wrap msgid "" "BGM (Black Green and Moody) theme from Blackosx,\n" "Install to /EFI/CLOVER/themes/BGM" msgstr "" "选择安装来自 Blackosx 的 BGM (Black Green and Moody) 主题,\n" "安装位置 /EFI/CLOVER/themes/BGM" #. type: "embedded_title" #: Resources/templates/Localizable.strings:183 #, no-wrap msgid "embedded" msgstr "内置的" #. type: "embedded_description" #: Resources/templates/Localizable.strings:184 #, no-wrap msgid "" "embedded theme from Clovy,\n" "Install to /EFI/CLOVER/themes/embedded" msgstr "" "选择安装来自 Clovy 的内置主题,\n" "安装位置 /EFI/CLOVER/themes/embedded" #. type: "metal_title" #: Resources/templates/Localizable.strings:187 #, no-wrap msgid "metal" msgstr "metal" #. type: "metal_description" #: Resources/templates/Localizable.strings:188 #, no-wrap msgid "" "The original metal theme from Slice,\n" "Install to /EFI/CLOVER/themes/metal" msgstr "" "选择安装来自 Slice 的原始 metal 主题,\n" "安装位置 /EFI/CLOVER/themes/metal" #. type: "cesium_title" #: Resources/templates/Localizable.strings:191 #, no-wrap msgid "cesium" msgstr "cesium" #. type: "cesium_description" #: Resources/templates/Localizable.strings:192 #, no-wrap msgid "" "Vector SVG theme from Slice,\n" "Install to /EFI/CLOVER/themes/cesium" msgstr "" "选择安装来自 Slice 的 Vector SVG 主题, \n" "安装位置 /EFI/CLOVER/themes/cesium" #. type: "clovy_title" #: Resources/templates/Localizable.strings:195 #, no-wrap msgid "Clovy" msgstr "Clovy" #. type: "clovy_description" #: Resources/templates/Localizable.strings:196 #, no-wrap msgid "" "Vector SVG theme from Clovy,\n" "Install to /EFI/CLOVER/themes/Clovy" msgstr "" "选择安装来自 Clovy 的 Vector SVG 主题,\n" "安装位置 /EFI/CLOVER/themes/Clovy" #. type: "random_title" #: Resources/templates/Localizable.strings:199 #, no-wrap msgid "random" msgstr "随机" #. type: "random_description" #: Resources/templates/Localizable.strings:200 #, no-wrap msgid "" "random theme,\n" "Install to /EFI/CLOVER/themes/random choose a theme from others" msgstr "" "选择安装随机主题,\n" "安装位置 /EFI/CLOVER/themes/random, 随机选择一个其它的主题" #. type: "steampunkblack_title" #: Resources/templates/Localizable.strings:203 #, no-wrap msgid "steampunkblack" msgstr "steampunkblack" #. type: "steampunkblack_description" #: Resources/templates/Localizable.strings:204 #, no-wrap msgid "" "steampunkblack theme from medik,\n" "Install to /EFI/CLOVER/themes/steampunkblack" msgstr "" "选择安装来自 medik 的 steampunkblack 主题,\n" "安装位置 /EFI/CLOVER/themes/steampunkblack" #. type: "CloverThemeManager_title" #: Resources/templates/Localizable.strings:207 #, no-wrap msgid "CloverThemeManager.app" msgstr "CloverThemeManager.app" #. type: "CloverThemeManager_description" #: Resources/templates/Localizable.strings:208 #, no-wrap msgid "" "CloverThemeManager.app by blackosx,\n" "keeps your Themes up to date, remove or install them by choosing from a wide selection.\n" "Install to /Applications" msgstr "" "CloverThemeManager.app by blackosx,\n" "保持你的主题为最新, 也可以移除主题, 或者从花样繁多的主题库中选择一个安装。\n" "安装位置 /Applications" #. type: "rc.scripts.on.target_title" #: Resources/templates/Localizable.strings:214 #, no-wrap msgid "Install RC scripts on target volume" msgstr "安装 RC 脚本到目标宗卷" #. type: "rc.scripts.on.target_description" #: Resources/templates/Localizable.strings:215 #, no-wrap msgid "" "Install all RC scripts on target volume.\n" "The target volume must be a bootable OSX system volume." msgstr "" "安装全部 RC scripts 到目标宗卷。\n" "目标宗卷必须是可启动的 OSX 系统宗卷。" #. type: "rc.scripts.on.all.volumes_title" #: Resources/templates/Localizable.strings:217 #, no-wrap msgid "Install all RC scripts on all other bootable OSX volumes" msgstr "安装全部 RC 脚本到全部可启动的 OSX 宗卷" #. type: "rc.scripts.on.all.volumes_description" #: Resources/templates/Localizable.strings:218 #, no-wrap msgid "Install all RC scripts on all internal bootable OSX volumes other than the target volume." msgstr "安装全部 RC 脚本到全部内置可启动的 OSX 宗卷。" #. type: "OptionalRCScripts" #: Resources/templates/Localizable.strings:219 #, no-wrap msgid "Optional RC Scripts" msgstr "选择安装 RC 脚本" #. type: "disable_sleep_proxy_client_title" #: Resources/templates/Localizable.strings:220 #, no-wrap msgid "Disable sleep proxy client" msgstr "停用 sleep proxy client" #. type: "disable_sleep_proxy_client_description" #: Resources/templates/Localizable.strings:221 #, no-wrap msgid "Disable the mDNSResponder sleep proxy client service. This will prevent the system waking from sleep every hours" msgstr "停用 mDNSResponder sleep proxy client 服务。可以避免系统休眠时, 每小时自动唤醒" #. type: "CloverPrefpane_title" #: Resources/templates/Localizable.strings:226 #, no-wrap msgid "Install Clover Preference Pane" msgstr "安装 Clover 系统偏好设置面板" #. type: "CloverPrefpane_description" #: Resources/templates/Localizable.strings:227 #, no-wrap msgid "" "Install Clover Preference Pane on target volume.\n" "Include CloverUpdater that can notify you about Clover updates." msgstr "" "安装 Clover 系统偏好设置面板到目标宗卷。 \n" "包含可提醒 Clover 更新信息的 Clover 更新软体。" #. type: "371.title" #: ../CloverUpdater/CloverUpdater.strings:1 #: ../CloverUpdater/CloverUpdater.strings:2 #: ../CloverUpdater/CloverUpdater.strings:5 #, no-wrap msgid "CloverUpdater" msgstr "Clover 更新软体" #. type: "58.title" #: ../CloverUpdater/CloverUpdater.strings:3 #, no-wrap msgid "About CloverUpdater" msgstr "关于 Clover 更新软体" #. type: "136.title" #: ../CloverUpdater/CloverUpdater.strings:4 #, no-wrap msgid "Quit CloverUpdater" msgstr "退出 Clover 更新软体" #. type: "534.title" #: ../CloverUpdater/CloverUpdater.strings:6 #, no-wrap msgid "Current local Clover revision:" msgstr "当前本地 Clover 修订版本：" #. type: "538.title" #: ../CloverUpdater/CloverUpdater.strings:7 #, no-wrap msgid "Latest update revision:" msgstr "最近更新之修订版本：" #. type: "542.title" #: ../CloverUpdater/CloverUpdater.strings:8 #, no-wrap msgid "Do you want to update ?" msgstr "您想要更新吗？" #. type: "546.title" #: ../CloverUpdater/CloverUpdater.strings:9 #, no-wrap msgid "Not now" msgstr "暂时不要" #. type: "548.title" #: ../CloverUpdater/CloverUpdater.strings:10 #, no-wrap msgid "Update" msgstr "更新" #. type: "585.title" #: ../CloverUpdater/CloverUpdater.strings:11 #, no-wrap msgid "No update available !" msgstr "没有可用的更新!" #. type: "586.title" #: ../CloverUpdater/CloverUpdater.strings:12 #, no-wrap msgid "Ok" msgstr "确定" #. type: "Never" #: ../CloverPrefpane/CloverPrefpane.strings:2 #: ../CloverPrefpane/Localizable.strings:5 #, no-wrap msgid "Never" msgstr "从不" #. type: "205.title" #: ../CloverPrefpane/CloverPrefpane.strings:3 #, no-wrap msgid "Daily" msgstr "每日" #. type: "206.title" #: ../CloverPrefpane/CloverPrefpane.strings:4 #, no-wrap msgid "Weekly" msgstr "每周" #. type: "217.title" #: ../CloverPrefpane/CloverPrefpane.strings:5 #, no-wrap msgid "Hourly" msgstr "每小时" #. type: "239.title" #: ../CloverPrefpane/CloverPrefpane.strings:6 #, no-wrap msgid "Monthly" msgstr "每月" #. type: "241.title" #: ../CloverPrefpane/CloverPrefpane.strings:7 #, no-wrap msgid "Check for Updates" msgstr "检查更新" #. type: "243.title" #: ../CloverPrefpane/CloverPrefpane.strings:8 #, no-wrap msgid "Schedule Check Updates Every:" msgstr "检查更新排程：" #. type: "248.title" #: ../CloverPrefpane/CloverPrefpane.strings:9 #, no-wrap msgid "Last check:" msgstr "最近检查：" #. type: "258.title" #: ../CloverPrefpane/CloverPrefpane.strings:10 #, no-wrap msgid "Check Now" msgstr "立刻检查" #. type: "262.title" #: ../CloverPrefpane/CloverPrefpane.strings:11 #, no-wrap msgid "Copyright (c) 2013 JrCs, kozlek\\nAll Rights Reserved" msgstr "版权所有 (C) 2013 JrCs, kozlek\\n保留所有权利" #. type: "294.label" #: ../CloverPrefpane/CloverPrefpane.strings:12 #, no-wrap msgid "NVRam Variables" msgstr "NVRam 变量" #. type: "295.label" #: ../CloverPrefpane/CloverPrefpane.strings:13 #, no-wrap msgid "General" msgstr "常规" #. type: "298.title" #: ../CloverPrefpane/CloverPrefpane.strings:14 #, no-wrap msgid "Revisions" msgstr "修订版本" #. type: "300.title" #: ../CloverPrefpane/CloverPrefpane.strings:15 #, no-wrap msgid "Current booted revision:" msgstr "当前启动的修订版本：" #. type: "302.title" #: ../CloverPrefpane/CloverPrefpane.strings:16 #, no-wrap msgid "Last installed revision:" msgstr "最近安装的修订版本：" #. type: "309.title" #: ../CloverPrefpane/CloverPrefpane.strings:17 #, no-wrap msgid "Log Files" msgstr "日志文件" #. type: "314.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:18 #, no-wrap msgid "Number of lines of history to keep in CloverEFI/system.log file in addition to the current CloverEFI/boot.log contents" msgstr "现有 CloverEFI/boot.log 内容以外，保存在 CloverEFI/system.log 的行数历史记录" #. type: "327.title" #: ../CloverPrefpane/CloverPrefpane.strings:19 #, no-wrap msgid "Advanced Configurations" msgstr "高级配置" #. type: "332.title" #: ../CloverPrefpane/CloverPrefpane.strings:20 #, no-wrap msgid "Force mount selected ESP at startup:" msgstr "启动时强制装载选定的 ESP 分区:" #. type: "339.title" #: ../CloverPrefpane/CloverPrefpane.strings:21 #, no-wrap msgid "Save NVRAM contents to disk:" msgstr "保存 NVRAM 内容到磁区:" #. type: "374.label" #: ../CloverPrefpane/CloverPrefpane.strings:22 #, no-wrap msgid "Theme" msgstr "开机主题" #. type: "392.title" #: ../CloverPrefpane/CloverPrefpane.strings:23 #, no-wrap msgid "Clover Theme" msgstr "Clover 主题" #. type: "399.title" #: ../CloverPrefpane/CloverPrefpane.strings:24 #, no-wrap msgid "Author:" msgstr "作者：" #. type: "401.title" #: ../CloverPrefpane/CloverPrefpane.strings:25 #, no-wrap msgid "Year:" msgstr "年份：" #. type: "423.title" #: ../CloverPrefpane/CloverPrefpane.strings:26 #, no-wrap msgid "To see previews of themes you must select the path to the EFI folder." msgstr "必须选择 EFI 文件夹路径, 才能预览开机主题。" #. type: "426.title" #: ../CloverPrefpane/CloverPrefpane.strings:27 #, no-wrap msgid "Theme:" msgstr "开机主题 :" #. type: "429.title" #: ../CloverPrefpane/CloverPrefpane.strings:28 #, no-wrap msgid "No Preview Available" msgstr "没有可用的预览" #. type: "431.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:29 #, no-wrap msgid "Mounting the ESP partition on boot" msgstr "开机时, 装载 ESP 分区" #. type: "452.ibShadowedToolTip" #: ../CloverPrefpane/CloverPrefpane.strings:30 #, no-wrap msgid "Where to save the nvram contents" msgstr "保存 nvram 内容的位置" #. type: "483.title" #: ../CloverPrefpane/CloverPrefpane.strings:31 #, no-wrap msgid "Number of history boot log lines to keep:" msgstr "保存的历史开机日志行数:" #. type: "522.title" #: ../CloverPrefpane/CloverPrefpane.strings:32 #, no-wrap msgid "Create timestamp CloverEFI/boot.log file on every boot" msgstr "每次开机时新建 CloverEFI/boot.log 文件的时间戳" #. type: "525.title" #: ../CloverPrefpane/CloverPrefpane.strings:33 #, no-wrap msgid "Number of timestamp boot.log files to keep:" msgstr "保存时间戳 boot.log 文件的数量:" #. type: "555.title" #: ../CloverPrefpane/CloverPrefpane.strings:34 #, no-wrap msgid "Backup" msgstr "备份" #. type: "557.title" #: ../CloverPrefpane/CloverPrefpane.strings:35 #, no-wrap msgid "On install backup EFI folder to destination volume" msgstr "安装时备份 EFI 文件夹到目标宗卷" #. type: "560.title" #: ../CloverPrefpane/CloverPrefpane.strings:36 #, no-wrap msgid "Number of backups to keep:" msgstr "保存的备份数量:" #. type: "567.title" #: ../CloverPrefpane/CloverPrefpane.strings:37 #, no-wrap msgid "EFI Folder path" msgstr "EFI 文件夹路径" #. type: "Auto" #: ../CloverPrefpane/CloverPrefpane.strings:38 #: ../CloverPrefpane/Localizable.strings:2 #, no-wrap msgid "Auto" msgstr "自动" #. type: "No" #: ../CloverPrefpane/CloverPrefpane.strings:39 #: ../CloverPrefpane/Localizable.strings:6 #, no-wrap msgid "No" msgstr "不" #. type: "Always" #: ../CloverPrefpane/Localizable.strings:1 #, no-wrap msgid "Always" msgstr "总是" #. type: "Boot Volume" #: ../CloverPrefpane/Localizable.strings:3 #, no-wrap msgid "Boot Volume" msgstr "开机宗卷" #. type: "ESP on [%@] %@" #: ../CloverPrefpane/Localizable.strings:4 #, no-wrap msgid "ESP on [%1$@] %2$@" msgstr "在 [%1$@] %2$@ 的ESP" #. type: "No description available" #: ../CloverPrefpane/Localizable.strings:7 #, no-wrap msgid "No description available" msgstr "没有描述" #. type: "Select the EFI directory" #: ../CloverPrefpane/Localizable.strings:8 #, no-wrap msgid "Select the EFI directory" msgstr "选择 EFI 目录" #. type: "Set EFI directory" #: ../CloverPrefpane/Localizable.strings:9 #, no-wrap msgid "Set EFI directory" msgstr "设置 EFI 目录" #. type: "Unknown" #: ../CloverPrefpane/Localizable.strings:10 #, no-wrap msgid "Unknown" msgstr "未知" #~ msgid "Clover v2" #~ msgstr "Clover v2" #~ msgid "http://sourceforge.net/projects/cloverefiboot/" #~ msgstr "http://sourceforge.net/projects/cloverefiboot/" #~ msgid "Install & Start 32bit boot first" #~ msgstr "安装 32位版本引导并优先启动" #~ msgid "" #~ "Install boot files and set to start 32bit first.\n" #~ "Default boot to boot = Clover EFI 32bit. You can..\n" #~ "Press key 1 to boot1 = Chameleon boot,\n" #~ "Press key 3 to boot3 = Clover EFI 32bit boot,\n" #~ "Press key 6 to boot6 = Clover EFI 64bit boot." #~ msgstr "" #~ "安装 32位+64位版本引导文件, 并优先启用 32位版本。\n" #~ "默认启动引导 = Clover 引导32位版本。你可以...\n" #~ "按 1 选 boot1 = 变色龙引导，\n" #~ "按 3 选 boot3 = Clover 引导 32位版本，\n" #~ "按 6 选 boot6 = Clover 引导 64位版本。" #~ msgid "CloverEFI 32-bits" #~ msgstr "CloverEFI 32位版本" #~ msgid "PS/2 keyboard driver, 32bit" #~ msgstr "32位版本, PS/2 键盘驱动。" #~ msgid "PS/2 trackpad driver, 32bit" #~ msgstr "32位版本, PS/2 触控板驱动。" #~ msgid "PS/2 mouse driver, 32bit" #~ msgstr "32位版本, PS/2 鼠标驱动。" #~ msgid "USB mouse driver, 32bit" #~ msgstr "32位版本, USB 鼠标驱动。" #~ msgid "ext2/3 filesystem driver from virtualbox, 32bit" #~ msgstr "32位版本, 来自 virtualbox 的 ext2/3 文件系统驱动。" #~ msgid "ext4 filesystem driver from virtualbox, 32bit" #~ msgstr "32位版本, 来自 virtualbox 的 ext4 文件系统驱动。" #~ msgid "USB 3.0 driver, 32bit" #~ msgstr "32位版本, USB 3.0 驱动。" #~ msgid "Alternate driver (v2) to fix Memory problems on UEFI firmware." #~ msgstr "另外的修正 UEFI 固件内存问题驱动 (v2)"