/* * spd.c - serial presence detect memory information implementation for reading memory spd This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. * * Originally restored from pcefi10.5 by netkas * Dynamic mem detection original impl. by Rekursor * System profiler fix and other fixes by Mozodojo. * Slice 2011 remade for UEFI * XMP detection - apianti */ // #include "Platform.h" #include "spd.h" #include "memvendors.h" #ifndef DEBUG_SPD #ifndef DEBUG_ALL #define DEBUG_SPD 0 #else #define DEBUG_SPD DEBUG_ALL #endif #endif #if DEBUG_SPD == 0 #define DBG(...) #else #define DBG(...) DebugLog(DEBUG_SPD, __VA_ARGS__) #endif //extern EFI_DATA_HUB_PROTOCOL *gDataHub; extern MEM_STRUCTURE gRAM; //extern DMI* gDMI; //==> extern UINT16 TotalCount; //<== BOOLEAN smbIntel; UINT8 smbPage; CONST CHAR8 *spd_memory_types[] = { "RAM", /* 00h Undefined */ "FPM", /* 01h FPM */ "EDO", /* 02h EDO */ "", /* 03h PIPELINE NIBBLE */ "SDRAM", /* 04h SDRAM */ "", /* 05h MULTIPLEXED ROM */ "DDR SGRAM", /* 06h SGRAM DDR */ "DDR SDRAM", /* 07h SDRAM DDR */ "DDR2 SDRAM", /* 08h SDRAM DDR 2 */ "", /* 09h Undefined */ "", /* 0Ah Undefined */ "DDR3 SDRAM", /* 0Bh SDRAM DDR 3 */ "DDR4 SDRAM" /* 0Ch SDRAM DDR 4 */ }; #define UNKNOWN_MEM_TYPE 2 UINT8 spd_mem_to_smbios[] = { UNKNOWN_MEM_TYPE, /* 00h Undefined */ UNKNOWN_MEM_TYPE, /* 01h FPM */ UNKNOWN_MEM_TYPE, /* 02h EDO */ UNKNOWN_MEM_TYPE, /* 03h PIPELINE NIBBLE */ SMB_MEM_TYPE_SDRAM, /* 04h SDRAM */ SMB_MEM_TYPE_ROM, /* 05h MULTIPLEXED ROM */ SMB_MEM_TYPE_SGRAM, /* 06h SGRAM DDR */ SMB_MEM_TYPE_DDR, /* 07h SDRAM DDR */ SMB_MEM_TYPE_DDR2, /* 08h SDRAM DDR 2 */ UNKNOWN_MEM_TYPE, /* 09h Undefined */ UNKNOWN_MEM_TYPE, /* 0Ah Undefined */ SMB_MEM_TYPE_DDR3, /* 0Bh SDRAM DDR 3 */ SMB_MEM_TYPE_DDR4 /* 0Ch SDRAM DDR 4 */ }; #define SPD_TO_SMBIOS_SIZE (sizeof(spd_mem_to_smbios)/sizeof(UINT8)) //define rdtsc(low,high) UINT64=AsmReadTsc() //define outb(port, val) IoWrite8(port, val) //define val=inb(port) val=IoRead(port) // Intel SMB reg offsets #define SMBHSTSTS 0 #define SMBHSTCNT 2 #define SMBHSTCMD 3 #define SMBHSTADD 4 #define SMBHSTDAT 5 #define SMBHSTDAT1 6 #define SBMBLKDAT 7 // MCP and nForce SMB reg offsets #define SMBHPRTCL_NV 0 /* protocol, PEC */ #define SMBHSTSTS_NV 1 /* status */ #define SMBHSTADD_NV 2 /* address */ #define SMBHSTCMD_NV 3 /* command */ #define SMBHSTDAT_NV 4 /* 32 data registers */ // // XMP memory profile #define SPD_XMP_SIG1 176 #define SPD_XMP_SIG1_VALUE 0x0C #define SPD_XMP_SIG2 177 #define SPD_XMP_SIG2_VALUE 0x4A #define SPD_XMP_PROFILES 178 #define SPD_XMP_VERSION 179 #define SPD_XMP_PROF1_DIVISOR 180 #define SPD_XMP_PROF1_DIVIDEND 181 #define SPD_XMP_PROF2_DIVISOR 182 #define SPD_XMP_PROF2_DIVIDEND 183 #define SPD_XMP_PROF1_RATIO 186 #define SPD_XMP_PROF2_RATIO 221 #define SPD_XMP20_SIG1 0x180 #define SPD_XMP20_SIG2 0x181 #define SPD_XMP20_PROFILES 0x182 #define SPD_XMP20_VERSION 0x183 /* 0x189 */ #define SPD_XMP20_PROF1_MINCYCLE 0x18C #define SPD_XMP20_PROF1_FINEADJUST 0x1AF /* 0x1B8 */ #define SPD_XMP20_PROF2_MINCYCLE 0x1BB #define SPD_XMP20_PROF2_FINEADJUST 0x1DE /* 0x1E7 */ UINT16 spd_indexes_ddr[] = { /* 3 */ SPD_NUM_ROWS, /* ModuleSize */ /* 4 */ SPD_NUM_COLUMNS, /* 5 */ SPD_NUM_DIMM_BANKS, /* 17 */ SPD_NUM_BANKS_PER_SDRAM, 9, /* Frequency */ 64, /* Manufacturer */ 95,96,97,98, /* UIS */ 0 }; UINT16 spd_indexes_ddr3[] = { 4,7,8, /* ModuleSize */ 10,11,12, /* Frequency */ /* 0x75, 0x76 */ SPD_DDR3_MEMORY_BANK, SPD_DDR3_MEMORY_CODE, /* Manufacturer */ 122,123,124,125, /* UIS */ /* XMP */ SPD_XMP_SIG1, SPD_XMP_SIG2, SPD_XMP_PROFILES, SPD_XMP_VERSION, SPD_XMP_PROF1_DIVISOR, SPD_XMP_PROF1_DIVIDEND, SPD_XMP_PROF2_DIVISOR, SPD_XMP_PROF2_DIVIDEND, SPD_XMP_PROF1_RATIO, SPD_XMP_PROF2_RATIO, 0 }; UINT16 spd_indexes_ddr4[] = { 4,6,12,13, /* ModuleSize */ 18,125, /* Frequency */ SPD_DDR4_MANUFACTURER_ID_BANK, SPD_DDR4_MANUFACTURER_ID_CODE, /* Manufacturer */ 325,326,327,328, /* UIS */ /* XMP 2.0 */ SPD_XMP20_SIG1, SPD_XMP20_SIG2, SPD_XMP20_PROFILES, SPD_XMP20_VERSION, SPD_XMP20_PROF1_MINCYCLE, SPD_XMP20_PROF1_FINEADJUST, SPD_XMP20_PROF2_MINCYCLE, SPD_XMP20_PROF2_FINEADJUST, 0 }; /** Read one byte from i2c, used for reading SPD */ UINT8 smb_read_byte(UINT32 base, UINT8 adr, UINT16 cmd) { // INTN l1, h1, l2, h2; UINT64 t, t1, t2; UINT8 page; UINT8 c; // UINT8 p; if (smbIntel) { IoWrite8(base + SMBHSTSTS, 0x1f); // reset SMBus Controller (set busy) IoWrite8(base + SMBHSTDAT, 0xff); t1 = AsmReadTsc(); //rdtsc(l1, h1); while ( IoRead8(base + SMBHSTSTS) & 0x01) { // wait until host is not busy t2 = AsmReadTsc(); //rdtsc(l2, h2); t = DivU64x64Remainder((t2 - t1), DivU64x32(gCPUStructure.TSCFrequency, 1000), 0); if (t > 5) { DBG("host is busy for too long for byte %2X:%d!\n", adr, cmd); return 0xFF; // break } } page = (cmd >> 8) & 1; if (page != smbPage) { // p = 0xFF; IoWrite8(base + SMBHSTCMD, 0x00); IoWrite8(base + SMBHSTADD, 0x6C + (page << 1)); // Set SPD Page Address #if 0 IoWrite8(base + SMBHSTCNT, 0x48); // Start + Byte Data Write // Don't use "Byte Data Write" because status goes from 0x41 (Busy) -> 0x44 (Error) #else IoWrite8(base + SMBHSTCNT, 0x40); // Start + Quick Write // status goes from 0x41 (Busy) -> 0x42 (Completed) #endif smbPage = page; t1 = AsmReadTsc(); while (!( (c=IoRead8(base + SMBHSTSTS)) & 0x02)) { // wait until command finished t2 = AsmReadTsc(); t = DivU64x64Remainder((t2 - t1), DivU64x32(gCPUStructure.TSCFrequency, 1000), 0); /* if (c != p) { DBG("%02d %02X spd page change status %2X\n", t, cmd, c); p = c; } */ if (c & 4) { DBG("spd page change error for byte %2X:%d!\n", adr, cmd); break; } if (t > 5) { DBG("spd page change taking too long for byte %2X:%d!\n", adr, cmd); break; // break after 5ms } } return smb_read_byte(base, adr, cmd); } // p = 0xFF; IoWrite8(base + SMBHSTCMD, (UINT8)(cmd & 0xFF)); // SMBus uses 8 bit commands IoWrite8(base + SMBHSTADD, (adr << 1) | 0x01 ); // read from spd IoWrite8(base + SMBHSTCNT, 0x48 ); // Start + Byte Data Read // status goes from 0x41 (Busy) -> 0x42 (Completed) or 0x44 (Error) t1 = AsmReadTsc(); while (!( (c=IoRead8(base + SMBHSTSTS)) & 0x02)) { // wait until command finished t2 = AsmReadTsc(); t = DivU64x64Remainder((t2 - t1), DivU64x32(gCPUStructure.TSCFrequency, 1000), 0); /* if (c != p) { DBG("%02d %02X spd read status %2X\n", t, cmd, c); p = c; } */ if (c & 4) { // This alway happens when trying to read the memory type (cmd 2) of an empty slot // DBG("spd byte read error for byte %2X:%d!\n", adr, cmd); break; } if (t > 5) { // if (cmd != 2) DBG("spd byte read taking too long for byte %2X:%d!\n", adr, cmd); break; // break after 5ms } } return IoRead8(base + SMBHSTDAT); } else { IoWrite8(base + SMBHSTSTS_NV, 0x1f); // reset SMBus Controller IoWrite8(base + SMBHSTDAT_NV, 0xff); t1 = AsmReadTsc(); //rdtsc(l1, h1); while ( IoRead8(base + SMBHSTSTS_NV) & 0x01) { // wait until read t2 = AsmReadTsc(); //rdtsc(l2, h2); t = DivU64x64Remainder((t2 - t1), DivU64x32(gCPUStructure.TSCFrequency, 1000), 0); if (t > 5) return 0xFF; // break } IoWrite8(base + SMBHSTSTS_NV, 0x00); // clear status register IoWrite16(base + SMBHSTCMD_NV, cmd); IoWrite8(base + SMBHSTADD_NV, (adr << 1) | 0x01 ); IoWrite8(base + SMBHPRTCL_NV, 0x07 ); t1 = AsmReadTsc(); while (!( IoRead8(base + SMBHSTSTS_NV) & 0x9F)) { // wait till command finished t2 = AsmReadTsc(); t = DivU64x64Remainder((t2 - t1), DivU64x32(gCPUStructure.TSCFrequency, 1000), 0); if (t > 5) break; // break after 5ms } return IoRead8(base + SMBHSTDAT_NV); } } /* SPD i2c read optimization: prefetch only what we need, read non prefetcheable bytes on the fly */ #define READ_SPD(spd, base, slot, x) spd[x] = smb_read_byte(base, 0x50 + slot, x) /** Read from spd *used* values only*/ VOID init_spd(UINT16* spd_indexes, UINT8* spd, UINT32 base, UINT8 slot) { UINT16 i; for (i=0; spd_indexes[i]; i++) { READ_SPD(spd, base, slot, spd_indexes[i]); } #if 0 DBG("Reading entire spd data\n"); for (i = 0; i < 512; i++) { UINT8 b = smb_read_byte(base, 0x50 + slot, i); DBG("%02X", b); } DBG(".\n"); #endif } // Get Vendor Name from spd, 3 cases handled DDR3, DDR4 and DDR2, // have different formats, always return a valid ptr. CONST CHAR8* getVendorName(RAM_SLOT_INFO* slot, UINT8 *spd, UINT32 base, UINT8 slot_num) { UINT8 bank = 0; UINT8 code = 0; UINT8 parity; UINT8 testbit; //UINT8 * spd = (UINT8 *) slot->spd; if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR4) { // DDR4 bank = spd[SPD_DDR4_MANUFACTURER_ID_BANK]; code = spd[SPD_DDR4_MANUFACTURER_ID_CODE]; parity = bank; testbit = bank; for (INTN i=6; i >= 0; i--) { parity ^= (testbit <<= 1); } if ( (parity & 0x80) == 0 ) { DBG("Bad parity bank=0x%2X code=0x%2X\n", bank, code); } bank &= 0x7f; for (UINTN i=0; i < VEN_MAP_SIZE; i++) { if (bank==vendorMap[i].bank && code==vendorMap[i].code) { return vendorMap[i].name; } } DBG("Unknown vendor bank=0x%2X code=0x%2X\n", bank, code); } else if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR3) { // DDR3 bank = spd[SPD_DDR3_MEMORY_BANK]; // constructors like Patriot use b7=1 code = spd[SPD_DDR3_MEMORY_CODE]; parity = bank; testbit = bank; for (INTN i=6; i >= 0; i--) { parity ^= (testbit <<= 1); } if ( (parity & 0x80) == 0 ) { DBG("Bad parity bank=0x%2X code=0x%2X\n", bank, code); } bank &= 0x7f; for (UINTN i=0; i < VEN_MAP_SIZE; i++) { if (bank==vendorMap[i].bank && code==vendorMap[i].code) { return vendorMap[i].name; } } } else if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR2 || spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR) { if(spd[64]==0x7f) { UINTN i; for (i=64; i<72 && spd[i]==0x7f;i++) { bank++; READ_SPD(spd, base, slot_num, (UINT8)(i+1)); // prefetch next spd byte to read for next loop } READ_SPD(spd, base, slot_num, (UINT8)i); code = spd[i]; } else { code = spd[64]; bank = 0; } for (UINTN i=0; i < VEN_MAP_SIZE; i++) { if (bank==vendorMap[i].bank && code==vendorMap[i].code) { return vendorMap[i].name; } } } /* OK there is no vendor id here lets try to match the partnum if it exists */ if (AsciiStrStr(slot->PartNo,"GU332") == slot->PartNo) { // Unifosa fingerprint return "Unifosa"; } return "NoName"; } /** Get Default Memory Module Speed (no overclocking handled) */ UINT16 getDDRspeedMhz(UINT8 * spd) { UINT16 frequency = 0; // default freq for unknown types //shit! DDR1 = 533 UINT16 xmpFrequency1 = 0, xmpFrequency2 = 0; UINT8 xmpVersion = 0; UINT8 xmpProfiles = 0; if (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR4) { UINT16 mincycle = spd[18]; INT8 fineadjust = spd[125]; frequency = (UINT16)(2000000 / (mincycle * 125 + fineadjust)); // Check if module supports XMP if ((spd[SPD_XMP20_SIG1] == SPD_XMP_SIG1_VALUE) && (spd[SPD_XMP20_SIG2] == SPD_XMP_SIG2_VALUE)) { xmpVersion = spd[SPD_XMP20_VERSION]; xmpProfiles = spd[SPD_XMP20_PROFILES] & 3; if ((xmpProfiles & 1) == 1) { // Check the first profile mincycle = spd[SPD_XMP20_PROF1_MINCYCLE]; fineadjust = spd[SPD_XMP20_PROF1_FINEADJUST]; xmpFrequency1 = (UINT16)(2000000 / (mincycle * 125 + fineadjust)); DBG("XMP Profile1: %d*125 %d ns\n", mincycle, fineadjust); } if ((xmpProfiles & 2) == 2) { // Check the second profile mincycle = spd[SPD_XMP20_PROF2_MINCYCLE]; fineadjust = spd[SPD_XMP20_PROF2_FINEADJUST]; xmpFrequency2 = (UINT16)(2000000 / (mincycle * 125 + fineadjust)); DBG("XMP Profile2: %d*125 %d ns\n", mincycle, fineadjust); } } } else if (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR3) { // This should be multiples of MTB converted to MHz- apianti UINT16 divisor = spd[10]; UINT16 dividend = spd[11]; UINT16 ratio = spd[12]; frequency = (((dividend != 0) && (divisor != 0) && (ratio != 0)) ? ((2000 * dividend) / (divisor * ratio)) : 0); // Check if module supports XMP if ((spd[SPD_XMP_SIG1] == SPD_XMP_SIG1_VALUE) && (spd[SPD_XMP_SIG2] == SPD_XMP_SIG2_VALUE)) { xmpVersion = spd[SPD_XMP_VERSION]; xmpProfiles = spd[SPD_XMP_PROFILES] & 3; if ((xmpProfiles & 1) == 1) { // Check the first profile divisor = spd[SPD_XMP_PROF1_DIVISOR]; dividend = spd[SPD_XMP_PROF1_DIVIDEND]; ratio = spd[SPD_XMP_PROF1_RATIO]; xmpFrequency1 = (((dividend != 0) && (divisor != 0) && (ratio != 0)) ? ((2000 * dividend) / (divisor * ratio)) : 0); DBG("XMP Profile1: %d*%d/%dns\n", ratio, divisor, dividend); } if ((xmpProfiles & 2) == 2) { // Check the second profile divisor = spd[SPD_XMP_PROF2_DIVISOR]; dividend = spd[SPD_XMP_PROF2_DIVIDEND]; ratio = spd[SPD_XMP_PROF2_RATIO]; xmpFrequency2 = (((dividend != 0) && (divisor != 0) && (ratio != 0)) ? ((2000 * dividend) / (divisor * ratio)) : 0); DBG("XMP Profile2: %d*%d/%dns\n", ratio, divisor, dividend); } } } else if ((spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR2) || (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR)) { switch(spd[9]) { case 0x50: return 400; case 0x3d: return 533; case 0x30: return 667; case 0x25: default: return 800; case 0x1E: return 1066; } } if (xmpProfiles) { DBG("Found module with XMP version %d.%d\n", (xmpVersion >> 4) & 0xF, xmpVersion & 0xF); switch (gSettings.XMPDetection) { case 0: // Detect the better XMP profile if (xmpFrequency1 >= xmpFrequency2) { if (xmpFrequency1 >= frequency) { DBG("Using XMP Profile1 instead of standard frequency %dMHz\n", frequency); frequency = xmpFrequency1; } } else if (xmpFrequency2 >= frequency) { DBG("Using XMP Profile2 instead of standard frequency %dMHz\n", frequency); frequency = xmpFrequency2; } break; case 1: // Use first profile if present if ((xmpProfiles & 1) == 1) { frequency = xmpFrequency1; DBG("Using XMP Profile1 instead of standard frequency %dMHz\n", frequency); } else { DBG("Not using XMP Profile1 because it is not present\n"); } break; case 2: // Use second profile if ((xmpProfiles & 2) == 2) { frequency = xmpFrequency2; DBG("Using XMP Profile2 instead of standard frequency %dMHz\n", frequency); } else { DBG("Not using XMP Profile2 because it is not present\n"); } break; default: break; } } else { // Print out XMP not detected switch (gSettings.XMPDetection) { case 0: DBG("Not using XMP because it is not present\n"); break; case 1: case 2: DBG("Not using XMP Profile%d because it is not present\n", gSettings.XMPDetection); break; default: break; } } return frequency; } #define SMST(a) ((UINT8)((spd[a] & 0xf0) >> 4)) #define SLST(a) ((UINT8)(spd[a] & 0x0f)) /** Get DDR3 or DDR2 serial number, 0 most of the times, always return a valid ptr */ CHAR8* getDDRSerial(UINT8* spd) { CHAR8* asciiSerial; //[16]; asciiSerial = (__typeof__(asciiSerial))AllocatePool(17); if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR4) { // DDR4 AsciiSPrint(asciiSerial, 17, "%2X%2X%2X%2X%2X%2X%2X%2X", SMST(325) /*& 0x7*/, SLST(325), SMST(326), SLST(326), SMST(327), SLST(327), SMST(328), SLST(328)); } else if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR3) { // DDR3 AsciiSPrint(asciiSerial, 17, "%2X%2X%2X%2X%2X%2X%2X%2X", SMST(122) /*& 0x7*/, SLST(122), SMST(123), SLST(123), SMST(124), SLST(124), SMST(125), SLST(125)); } else if (spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR2 || spd[SPD_MEMORY_TYPE]==SPD_MEMORY_TYPE_SDRAM_DDR) { // DDR2 or DDR AsciiSPrint(asciiSerial, 17, "%2X%2X%2X%2X%2X%2X%2X%2X", SMST(95) /*& 0x7*/, SLST(95), SMST(96), SLST(96), SMST(97), SLST(97), SMST(98), SLST(98)); } else { AsciiStrCpyS(asciiSerial, 17, "0000000000000000"); } return asciiSerial; } /** Get DDR2 or DDR3 or DDR4 Part Number, always return a valid ptr */ CHAR8* getDDRPartNum(UINT8* spd, UINT32 base, UINT8 slot) { UINT16 i, start=0, index = 0; CHAR8 c; CHAR8* asciiPartNo = (__typeof__(asciiPartNo))AllocatePool(32); //[32]; if (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR4) { start = 329; } else if (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR3) { start = 128; } else if (spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR2 || spd[SPD_MEMORY_TYPE] == SPD_MEMORY_TYPE_SDRAM_DDR) { start = 73; } // Check that the spd part name is zero terminated and that it is ascii: ZeroMem(asciiPartNo, 32); //sizeof(asciiPartNo)); for (i = start; i < start + 20; i++) { READ_SPD(spd, base, slot, (UINT16)i); // only read once the corresponding model part (ddr3 or ddr2) c = spd[i]; if (IS_ALFA(c) || IS_DIGIT(c) || IS_PUNCT(c)) // It seems that System Profiler likes only letters and digits... asciiPartNo[index++] = c; else if (c < 0x20) break; } return asciiPartNo; } //INTN mapping []= {0,2,1,3,4,6,5,7,8,10,9,11}; #define PCI_COMMAND_OFFSET 0x04 /** Read from smbus the SPD content and interpret it for detecting memory attributes */ STATIC VOID read_smb(EFI_PCI_IO_PROTOCOL *PciIo, UINT16 vid, UINT16 did) { // EFI_STATUS Status; UINT16 speed; UINT8 i;// spd_size, spd_type; UINT32 base, mmio, hostc; UINT16 Command; //RAM_SLOT_INFO* slot; //BOOLEAN fullBanks; UINT8* spdbuf; // UINT16 vid, did; UINT8 TotalSlotsCount; smbPage = 0; // valid pages are 0 and 1; assume the first page (page 0) is already selected // vid = gPci->Hdr.VendorId; // did = gPci->Hdr.DeviceId; /*Status = */PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint16, PCI_COMMAND_OFFSET, 1, &Command ); Command |= 1; /*Status = */PciIo->Pci.Write ( PciIo, EfiPciIoWidthUint16, PCI_COMMAND_OFFSET, 1, &Command ); DBG("SMBus CmdReg: 0x%X\n", Command); /*Status = */PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0x10, 1, &mmio ); if (vid == 0x8086) { /*Status = */PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0x20, 1, &base ); base &= 0xFFFE; smbIntel = TRUE; } else { /*Status = */PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0x24, // iobase offset 0x24 on MCP 1, &base ); base &= 0xFFFC; smbIntel = FALSE; } /*Status = */PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0x40, 1, &hostc ); MsgLog("Scanning SMBus [%04X:%04X], mmio: 0x%X, ioport: 0x%X, hostc: 0x%X\n", vid, did, mmio, base, hostc); // needed at least for laptops //fullBanks = (gDMI->MemoryModules == gDMI->CntMemorySlots); spdbuf = (__typeof__(spdbuf))AllocateZeroPool(MAX_SPD_SIZE); // Search MAX_RAM_SLOTS slots //==> /* TotalSlotsCount = (UINT8) TotalCount; if (!TotalSlotsCount) { TotalSlotsCount = MAX_RAM_SLOTS; } */ TotalSlotsCount = 8; //MAX_RAM_SLOTS; -- spd can read only 8 slots DBG("Slots to scan [%d]...\n", TotalSlotsCount); for (i = 0; i < TotalSlotsCount; i++){ //<== ZeroMem(spdbuf, MAX_SPD_SIZE); READ_SPD(spdbuf, base, i, SPD_MEMORY_TYPE); if (spdbuf[SPD_MEMORY_TYPE] == 0xFF) { //DBG("SPD[%d]: Empty\n", i); continue; } else if (spdbuf[SPD_MEMORY_TYPE] == 0) { // First 0x40 bytes of DDR4 spd second page is 0. Maybe we need to change page, so do that and retry. DBG("SPD[%d]: Got invalid type %d @0x%X. Will set page and retry.\n", i, spdbuf[SPD_MEMORY_TYPE], 0x50 + i); smbPage = 0xFF; // force page to be set READ_SPD(spdbuf, base, i, SPD_MEMORY_TYPE); } // Copy spd data into buffer DBG("SPD[%d]: Type %d @0x%X\n", i, spdbuf[SPD_MEMORY_TYPE], 0x50 + i); switch (spdbuf[SPD_MEMORY_TYPE]) { case SPD_MEMORY_TYPE_SDRAM_DDR: init_spd(spd_indexes_ddr, spdbuf, base, i); gRAM.SPD[i].Type = MemoryTypeDdr; gRAM.SPD[i].ModuleSize = (((1 << ((spdbuf[SPD_NUM_ROWS] & 0x0f) + (spdbuf[SPD_NUM_COLUMNS] & 0x0f) - 17)) * ((spdbuf[SPD_NUM_DIMM_BANKS] & 0x7) + 1) * spdbuf[SPD_NUM_BANKS_PER_SDRAM])/3)*2; break; case SPD_MEMORY_TYPE_SDRAM_DDR2: init_spd(spd_indexes_ddr, spdbuf, base, i); gRAM.SPD[i].Type = MemoryTypeDdr2; gRAM.SPD[i].ModuleSize = ((1 << ((spdbuf[SPD_NUM_ROWS] & 0x0f) + (spdbuf[SPD_NUM_COLUMNS] & 0x0f) - 17)) * ((spdbuf[SPD_NUM_DIMM_BANKS] & 0x7) + 1) * spdbuf[SPD_NUM_BANKS_PER_SDRAM]); break; case SPD_MEMORY_TYPE_SDRAM_DDR3: init_spd(spd_indexes_ddr3, spdbuf, base, i); gRAM.SPD[i].Type = MemoryTypeDdr3; gRAM.SPD[i].ModuleSize = ((spdbuf[4] & 0x0f) + 28 ) + ((spdbuf[8] & 0x7) + 3 ); gRAM.SPD[i].ModuleSize -= (spdbuf[7] & 0x7) + 25; gRAM.SPD[i].ModuleSize = ((1 << gRAM.SPD[i].ModuleSize) * (((spdbuf[7] >> 3) & 0x1f) + 1)); break; case SPD_MEMORY_TYPE_SDRAM_DDR4: init_spd(spd_indexes_ddr4, spdbuf, base, i); gRAM.SPD[i].Type = MemoryTypeDdr4; gRAM.SPD[i].ModuleSize = (1 << ((spdbuf[4] & 0x0f) + 8 /* Mb */ - 3 /* MB */)) // SDRAM Capacity * (1 << ((spdbuf[13] & 0x07) + 3)) // Primary Bus Width / (1 << ((spdbuf[12] & 0x07) + 2)) // SDRAM Width * (((spdbuf[12] >> 3) & 0x07) + 1) // Logical Ranks per DIMM * (((spdbuf[6] & 0x03) == 2) ? (((spdbuf[6] >> 4) & 0x07) + 1) : 1); /* Total = SDRAM Capacity / 8 * Primary Bus Width / SDRAM Width * Logical Ranks per DIMM where: : SDRAM Capacity = SPD byte 4 bits 3~0 : Primary Bus Width = SPD byte 13 bits 2~0 : SDRAM Width = SPD byte 12 bits 2~0 : Logical Ranks per DIMM = for SDP, DDP, QDP: = SPD byte 12 bits 5~3 for 3DS: = SPD byte 12 bits 5~3 times SPD byte 6 bits 6~4 (Die Count) SDRAM Capacity 0 0000 = 256 Mb 1 0001 = 512 Mb 2 0010 = 1 Gb 3 0011 = 2 Gb 4 0100 = 4 Gb 5 0101 = 8 Gb 6 0110 = 16 Gb 7 0111 = 32 Gb Primary Bus Width 000 = 8 bits 001 = 16 bits 010 = 32 bits 011 = 64 bits SDRAM Device Width 000 = 4 bits 001 = 8 bits 010 = 16 bits 011 = 32 bits Logical Ranks per DIMM for SDP, DDP, QDP 000 = 1 Package Rank 001 = 2 Package Ranks 010 = 3 Package Ranks 011 = 4 Package Ranks Die Count for 3DS 000 = Single die 001 = 2 die 010 = 3 die 011 = 4 die 100 = 5 die 101 = 6 die 110 = 7 die 111 = 8 die */ break; default: gRAM.SPD[i].ModuleSize = 0; break; } if (gRAM.SPD[i].ModuleSize == 0) continue; //spd_type = (slot->spd[SPD_MEMORY_TYPE] < ((UINT8) 12) ? slot->spd[SPD_MEMORY_TYPE] : 0); //gRAM Type = spd_mem_to_smbios[spd_type]; gRAM.SPD[i].PartNo = getDDRPartNum(spdbuf, base, i); gRAM.SPD[i].Vendor = getVendorName(&(gRAM.SPD[i]), spdbuf, base, i); gRAM.SPD[i].SerialNo = getDDRSerial(spdbuf); //XXX - when we can FreePool allocated for these buffers? // determine spd speed speed = getDDRspeedMhz(spdbuf); DBG("DDR speed %dMHz\n", speed); if (gRAM.SPD[i].Frequency 0) { UINT32 freq = (UINT32)DivU64x32(gRAM.Frequency, 500000); // now round off special cases UINT32 fmod100 = freq %100; switch(fmod100) { case 1: freq--; break; case 32: freq++; break; case 65: freq++; break; case 98: freq+=2;break; case 99: freq++; break; } gRAM.SPD[i].Frequency = freq; DBG("RAM speed %dMHz\n", freq); } #endif MsgLog("Slot: %d Type %d %dMB %dMHz Vendor=%s PartNo=%s SerialNo=%s\n", i, (int)gRAM.SPD[i].Type, gRAM.SPD[i].ModuleSize, gRAM.SPD[i].Frequency, gRAM.SPD[i].Vendor, gRAM.SPD[i].PartNo, gRAM.SPD[i].SerialNo); gRAM.SPD[i].InUse = TRUE; ++(gRAM.SPDInUse); //} // laptops sometimes show slot 0 and 2 with slot 1 empty when only 2 slots are presents so: //gDMI->DIMM[i]= (UINT32)((i>0 && gRAM->DIMM[1].InUse==FALSE && !fullBanks && TotalCount == 2)?mapping[i] : i); // for laptops case, mapping setup would need to be more generic than this //slot->spd = NULL; } // for if (smbPage != 0) { READ_SPD(spdbuf, base, 0, 0); // force first page when we're done } } VOID ScanSPD() { EFI_STATUS Status; EFI_HANDLE *HandleBuffer = NULL; // EFI_GUID **ProtocolGuidArray; EFI_PCI_IO_PROTOCOL *PciIo = NULL; UINTN HandleCount; // UINTN ArrayCount; UINTN Index; // UINTN ProtocolIndex; PCI_TYPE00 gPci; DbgHeader("ScanSPD"); // Scan PCI handles Status = gBS->LocateHandleBuffer ( ByProtocol, &gEfiPciIoProtocolGuid, NULL, &HandleCount, &HandleBuffer ); if (!EFI_ERROR (Status)) { for (Index = 0; Index < HandleCount; ++Index) { Status = gBS->HandleProtocol(HandleBuffer[Index], &gEfiPciIoProtocolGuid, (VOID **)&PciIo); if (!EFI_ERROR (Status)) { // Read PCI BUS //PciIo->GetLocation (PciIo, &Segment, &Bus, &Device, &Function); Status = PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0, sizeof (gPci) / sizeof (UINT32), &gPci ); //SmBus controller has class = 0x0c0500 if ((gPci.Hdr.ClassCode[2] == 0x0c) && (gPci.Hdr.ClassCode[1] == 5) && (gPci.Hdr.ClassCode[0] == 0) && (gPci.Hdr.VendorId == 0x8086 || gPci.Hdr.VendorId == 0x10DE)) { DBG ("SMBus device : %04X %04X class=%02X%02X%02X status=%r\n", gPci.Hdr.VendorId, gPci.Hdr.DeviceId, gPci.Hdr.ClassCode[2], gPci.Hdr.ClassCode[1], gPci.Hdr.ClassCode[0], Status ); read_smb(PciIo, gPci.Hdr.VendorId, gPci.Hdr.DeviceId); } } } } // Scan PCI BUS For SmBus controller /* Status = gBS->LocateHandleBuffer(AllHandles,NULL,NULL,&HandleCount,&HandleBuffer); if (!EFI_ERROR(Status)) { for (HandleIndex = 0; HandleIndex < HandleCount; HandleIndex++) { Status = gBS->ProtocolsPerHandle(HandleBuffer[HandleIndex],&ProtocolGuidArray,&ArrayCount); if (!EFI_ERROR(Status)) { for (ProtocolIndex = 0; ProtocolIndex < ArrayCount; ProtocolIndex++) { if (CompareGuid(&gEfiPciIoProtocolGuid, ProtocolGuidArray[ProtocolIndex])) { Status = gBS->OpenProtocol(HandleBuffer[HandleIndex],&gEfiPciIoProtocolGuid,(VOID **)&PciIo,gImageHandle,NULL,EFI_OPEN_PROTOCOL_GET_PROTOCOL); if (!EFI_ERROR(Status)) { // Read PCI BUS Status = PciIo->Pci.Read ( PciIo, EfiPciIoWidthUint32, 0, sizeof (gPci) / sizeof (UINT32), &gPci ); //SmBus controller has class = 0x0c0500 if ((gPci.Hdr.ClassCode[2] == 0x0c) && (gPci.Hdr.ClassCode[1] == 5) && (gPci.Hdr.ClassCode[0] == 0) && (gPci.Hdr.VendorId == 0x8086 || gPci.Hdr.VendorId == 0x10DE)) { read_smb(PciIo); } } } } } } } */ }