/** @file DXE Core Main Entry Point Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "DxeMain.h" //#include "Debug.h" // // DXE Core Global Variables for Protocols from PEI // EFI_HANDLE mDecompressHandle = NULL; // // DXE Core globals for Architecture Protocols // EFI_SECURITY_ARCH_PROTOCOL *gSecurity = NULL; EFI_SECURITY2_ARCH_PROTOCOL *gSecurity2 = NULL; EFI_CPU_ARCH_PROTOCOL *gCpu = NULL; EFI_METRONOME_ARCH_PROTOCOL *gMetronome = NULL; EFI_TIMER_ARCH_PROTOCOL *gTimer = NULL; EFI_BDS_ARCH_PROTOCOL *gBds = NULL; EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *gWatchdogTimer = NULL; // // DXE Core globals for optional protocol dependencies // EFI_SMM_BASE2_PROTOCOL *gSmmBase2 = NULL; // // DXE Core Global used to update core loaded image protocol handle // EFI_GUID *gDxeCoreFileName; EFI_LOADED_IMAGE_PROTOCOL *gDxeCoreLoadedImage; // // DXE Core Module Variables // EFI_BOOT_SERVICES mBootServices = { { EFI_BOOT_SERVICES_SIGNATURE, // Signature EFI_BOOT_SERVICES_REVISION, // Revision sizeof (EFI_BOOT_SERVICES), // HeaderSize 0, // CRC32 0 // Reserved }, (EFI_RAISE_TPL) CoreRaiseTpl, // RaiseTPL (EFI_RESTORE_TPL) CoreRestoreTpl, // RestoreTPL +0x20 (EFI_ALLOCATE_PAGES) CoreAllocatePages, // AllocatePages (EFI_FREE_PAGES) CoreFreePages, // FreePages (EFI_GET_MEMORY_MAP) CoreGetMemoryMap, // GetMemoryMap (EFI_ALLOCATE_POOL) CoreAllocatePool, // AllocatePool +0x40 (EFI_FREE_POOL) CoreFreePool, // FreePool (EFI_CREATE_EVENT) CoreCreateEvent, // CreateEvent +0x50 (EFI_SET_TIMER) CoreSetTimer, // SetTimer (EFI_WAIT_FOR_EVENT) CoreWaitForEvent, // WaitForEvent +0x60 (EFI_SIGNAL_EVENT) CoreSignalEvent, // SignalEvent (EFI_CLOSE_EVENT) CoreCloseEvent, // CloseEvent 0x70 (EFI_CHECK_EVENT) CoreCheckEvent, // CheckEvent (EFI_INSTALL_PROTOCOL_INTERFACE) CoreInstallProtocolInterface, // InstallProtocolInterface 0x80 (EFI_REINSTALL_PROTOCOL_INTERFACE) CoreReinstallProtocolInterface, // ReinstallProtocolInterface (EFI_UNINSTALL_PROTOCOL_INTERFACE) CoreUninstallProtocolInterface, // UninstallProtocolInterface 0x90 (EFI_HANDLE_PROTOCOL) CoreHandleProtocol, // HandleProtocol (VOID *) NULL, // Reserved 0xA0 (EFI_REGISTER_PROTOCOL_NOTIFY) CoreRegisterProtocolNotify, // RegisterProtocolNotify 0xA8 (EFI_LOCATE_HANDLE) CoreLocateHandle, // LocateHandle (EFI_LOCATE_DEVICE_PATH) CoreLocateDevicePath, // LocateDevicePath 0xB8 (EFI_INSTALL_CONFIGURATION_TABLE) CoreInstallConfigurationTable, // InstallConfigurationTable 0xC0 (EFI_IMAGE_LOAD) CoreLoadImage, // LoadImage (EFI_IMAGE_START) CoreStartImage, // StartImage 0xD0 (EFI_EXIT) CoreExit, // Exit (EFI_IMAGE_UNLOAD) CoreUnloadImage, // UnloadImage 0xE0 (EFI_EXIT_BOOT_SERVICES) CoreExitBootServices, // ExitBootServices 0xE8 (EFI_GET_NEXT_MONOTONIC_COUNT) CoreEfiNotAvailableYetArg1, // GetNextMonotonicCount 0xF0 (EFI_STALL) CoreStall, // Stall (EFI_SET_WATCHDOG_TIMER) CoreSetWatchdogTimer, // SetWatchdogTimer 0x100 (EFI_CONNECT_CONTROLLER) CoreConnectController, // ConnectController (EFI_DISCONNECT_CONTROLLER) CoreDisconnectController, // DisconnectController (EFI_OPEN_PROTOCOL) CoreOpenProtocol, // OpenProtocol (EFI_CLOSE_PROTOCOL) CoreCloseProtocol, // CloseProtocol (EFI_OPEN_PROTOCOL_INFORMATION) CoreOpenProtocolInformation, // OpenProtocolInformation (EFI_PROTOCOLS_PER_HANDLE) CoreProtocolsPerHandle, // ProtocolsPerHandle (EFI_LOCATE_HANDLE_BUFFER) CoreLocateHandleBuffer, // LocateHandleBuffer (EFI_LOCATE_PROTOCOL) CoreLocateProtocol, // LocateProtocol 0x140 (EFI_INSTALL_MULTIPLE_PROTOCOL_INTERFACES) CoreInstallMultipleProtocolInterfaces, // InstallMultipleProtocolInterfaces (EFI_UNINSTALL_MULTIPLE_PROTOCOL_INTERFACES) CoreUninstallMultipleProtocolInterfaces, // UninstallMultipleProtocolInterfaces (EFI_CALCULATE_CRC32) CoreEfiNotAvailableYetArg3, // CalculateCrc32 (EFI_COPY_MEM) CopyMem, // CopyMem 0x160 (EFI_SET_MEM) SetMem, // SetMem 0x168 (EFI_CREATE_EVENT_EX) CoreCreateEventEx // CreateEventEx 0x170 }; EFI_DXE_SERVICES mDxeServices = { { DXE_SERVICES_SIGNATURE, // Signature DXE_SERVICES_REVISION, // Revision sizeof (DXE_SERVICES), // HeaderSize 0, // CRC32 0 // Reserved }, (EFI_ADD_MEMORY_SPACE) CoreAddMemorySpace, // AddMemorySpace (EFI_ALLOCATE_MEMORY_SPACE) CoreAllocateMemorySpace, // AllocateMemorySpace (EFI_FREE_MEMORY_SPACE) CoreFreeMemorySpace, // FreeMemorySpace (EFI_REMOVE_MEMORY_SPACE) CoreRemoveMemorySpace, // RemoveMemorySpace (EFI_GET_MEMORY_SPACE_DESCRIPTOR) CoreGetMemorySpaceDescriptor, // GetMemorySpaceDescriptor (EFI_SET_MEMORY_SPACE_ATTRIBUTES) CoreSetMemorySpaceAttributes, // SetMemorySpaceAttributes (EFI_GET_MEMORY_SPACE_MAP) CoreGetMemorySpaceMap, // GetMemorySpaceMap (EFI_ADD_IO_SPACE) CoreAddIoSpace, // AddIoSpace (EFI_ALLOCATE_IO_SPACE) CoreAllocateIoSpace, // AllocateIoSpace (EFI_FREE_IO_SPACE) CoreFreeIoSpace, // FreeIoSpace (EFI_REMOVE_IO_SPACE) CoreRemoveIoSpace, // RemoveIoSpace (EFI_GET_IO_SPACE_DESCRIPTOR) CoreGetIoSpaceDescriptor, // GetIoSpaceDescriptor (EFI_GET_IO_SPACE_MAP) CoreGetIoSpaceMap, // GetIoSpaceMap (EFI_DISPATCH) CoreDispatcher, // Dispatch (EFI_SCHEDULE) CoreSchedule, // Schedule (EFI_TRUST) CoreTrust, // Trust (EFI_PROCESS_FIRMWARE_VOLUME) CoreProcessFirmwareVolume, // ProcessFirmwareVolume NULL, }; EFI_SYSTEM_TABLE mEfiSystemTableTemplate = { { EFI_SYSTEM_TABLE_SIGNATURE, // Signature EFI_SYSTEM_TABLE_REVISION, // Revision sizeof (EFI_SYSTEM_TABLE), // HeaderSize 0, // CRC32 0 // Reserved }, NULL, // FirmwareVendor 0, // FirmwareRevision NULL, // ConsoleInHandle NULL, // ConIn NULL, // ConsoleOutHandle NULL, // ConOut NULL, // StandardErrorHandle NULL, // StdErr NULL, // RuntimeServices &mBootServices, // BootServices 0, // NumberOfConfigurationTableEntries NULL // ConfigurationTable }; EFI_RUNTIME_SERVICES mEfiRuntimeServicesTableTemplate = { { EFI_RUNTIME_SERVICES_SIGNATURE, // Signature EFI_RUNTIME_SERVICES_REVISION, // Revision sizeof (EFI_RUNTIME_SERVICES), // HeaderSize 0, // CRC32 0 // Reserved }, (EFI_GET_TIME) CoreEfiNotAvailableYetArg2, // GetTime (EFI_SET_TIME) CoreEfiNotAvailableYetArg1, // SetTime (EFI_GET_WAKEUP_TIME) CoreEfiNotAvailableYetArg3, // GetWakeupTime (EFI_SET_WAKEUP_TIME) CoreEfiNotAvailableYetArg2, // SetWakeupTime (EFI_SET_VIRTUAL_ADDRESS_MAP) CoreEfiNotAvailableYetArg4, // SetVirtualAddressMap (EFI_CONVERT_POINTER) CoreEfiNotAvailableYetArg2, // ConvertPointer (EFI_GET_VARIABLE) CoreEfiNotAvailableYetArg5, // GetVariable //0x48 (EFI_GET_NEXT_VARIABLE_NAME) CoreEfiNotAvailableYetArg3, // GetNextVariableName (EFI_SET_VARIABLE) CoreEfiNotAvailableYetArg5, // SetVariable (EFI_GET_NEXT_HIGH_MONO_COUNT) CoreEfiNotAvailableYetArg1, // GetNextHighMonotonicCount (EFI_RESET_SYSTEM) CoreEfiNotAvailableYetArg4, // ResetSystem (EFI_UPDATE_CAPSULE) CoreEfiNotAvailableYetArg3, // UpdateCapsule (EFI_QUERY_CAPSULE_CAPABILITIES) CoreEfiNotAvailableYetArg4, // QueryCapsuleCapabilities (EFI_QUERY_VARIABLE_INFO) CoreEfiNotAvailableYetArg4 // QueryVariableInfo }; EFI_RUNTIME_ARCH_PROTOCOL gRuntimeTemplate = { INITIALIZE_LIST_HEAD_VARIABLE (gRuntimeTemplate.ImageHead), INITIALIZE_LIST_HEAD_VARIABLE (gRuntimeTemplate.EventHead), // // Make sure Size != sizeof (EFI_MEMORY_DESCRIPTOR). This will // prevent people from having pointer math bugs in their code. // now you have to use *DescriptorSize to make things work. // sizeof (EFI_MEMORY_DESCRIPTOR) + sizeof (UINT64) - (sizeof (EFI_MEMORY_DESCRIPTOR) % sizeof (UINT64)), EFI_MEMORY_DESCRIPTOR_VERSION, 0, NULL, NULL, FALSE, FALSE }; EFI_RUNTIME_ARCH_PROTOCOL *gRuntime = &gRuntimeTemplate; // // DXE Core Global Variables for the EFI System Table, Boot Services Table, // DXE Services Table, and Runtime Services Table // EFI_DXE_SERVICES *gDxeCoreDS = &mDxeServices; EFI_SYSTEM_TABLE *gDxeCoreST = NULL; // // For debug initialize gDxeCoreRT to template. gDxeCoreRT must be allocated from RT memory // but gDxeCoreRT is used for ASSERT () and DEBUG () type macros so lets give it // a value that will not cause debug infrastructure to crash early on. // EFI_RUNTIME_SERVICES *gDxeCoreRT = &mEfiRuntimeServicesTableTemplate; EFI_HANDLE gDxeCoreImageHandle = NULL; // // EFI Decompress Protocol // EFI_DECOMPRESS_PROTOCOL gEfiDecompress = { DxeMainUefiDecompressGetInfo, DxeMainUefiDecompress }; // // For Loading modules at fixed address feature, the configuration table is to cache the top address below which to load // Runtime code&boot time code // GLOBAL_REMOVE_IF_UNREFERENCED EFI_LOAD_FIXED_ADDRESS_CONFIGURATION_TABLE gLoadModuleAtFixAddressConfigurationTable = {0, 0}; // Main entry point to the DXE Core // /** Main entry point to DXE Core. @param HobStart Pointer to the beginning of the HOB List from PEI. @return This function should never return. **/ VOID EFIAPI DxeMain ( IN VOID *HobStart ) { EFI_STATUS Status; EFI_PHYSICAL_ADDRESS MemoryBaseAddress; UINT64 MemoryLength; PE_COFF_LOADER_IMAGE_CONTEXT ImageContext; UINTN Index; EFI_HOB_GUID_TYPE *GuidHob; EFI_VECTOR_HANDOFF_INFO *VectorInfoList; EFI_VECTOR_HANDOFF_INFO *VectorInfo; //ClearScreen(); // // Setup the default exception handlers // VectorInfoList = NULL; GuidHob = GetNextGuidHob (&gEfiVectorHandoffInfoPpiGuid, HobStart); if (GuidHob != NULL) { VectorInfoList = (EFI_VECTOR_HANDOFF_INFO *) (GET_GUID_HOB_DATA(GuidHob)); } Status = InitializeCpuExceptionHandlers (VectorInfoList); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Initialize Debug Agent to support source level debug in DXE phase // InitializeDebugAgent (DEBUG_AGENT_INIT_DXE_CORE, HobStart, NULL); // // Initialize Memory Services // CoreInitializeMemoryServices (&HobStart, &MemoryBaseAddress, &MemoryLength); // // Allocate the EFI System Table and EFI Runtime Service Table from EfiRuntimeServicesData // Use the templates to initialize the contents of the EFI System Table and EFI Runtime Services Table // gDxeCoreST = AllocateRuntimeCopyPool (sizeof (EFI_SYSTEM_TABLE), &mEfiSystemTableTemplate); // ASSERT (gDxeCoreST != NULL); gDxeCoreRT = AllocateRuntimeCopyPool (sizeof (EFI_RUNTIME_SERVICES), &mEfiRuntimeServicesTableTemplate); // ASSERT (gDxeCoreRT != NULL); gDxeCoreST->RuntimeServices = gDxeCoreRT; // // Start the Image Services. // Status = CoreInitializeImageServices (HobStart); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Call constructor for all libraries // ProcessLibraryConstructorList (gDxeCoreImageHandle, gDxeCoreST); PERF_END (NULL,"PEI", NULL, 0) ; PERF_START (NULL,"DXE", NULL, 0) ; // // Report DXE Core image information to the PE/COFF Extra Action Library // ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)gDxeCoreLoadedImage->ImageBase; ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN) ImageContext.ImageAddress); PeCoffLoaderRelocateImageExtraAction (&ImageContext); // // Initialize the Global Coherency Domain Services // Status = CoreInitializeGcdServices (&HobStart, MemoryBaseAddress, MemoryLength); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Install the DXE Services Table into the EFI System Tables's Configuration Table // Status = CoreInstallConfigurationTable (&gEfiDxeServicesTableGuid, gDxeCoreDS); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Install the HOB List into the EFI System Tables's Configuration Table // Status = CoreInstallConfigurationTable (&gEfiHobListGuid, HobStart); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Install Memory Type Information Table into the EFI System Tables's Configuration Table // Status = CoreInstallConfigurationTable (&gEfiMemoryTypeInformationGuid, &gMemoryTypeInformation); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // If Loading modules At fixed address feature is enabled, install Load moduels at fixed address // Configuration Table so that user could easily to retrieve the top address to load Dxe and PEI // Code and Tseg base to load SMM driver. // if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) { Status = CoreInstallConfigurationTable (&gLoadFixedAddressConfigurationTableGuid, &gLoadModuleAtFixAddressConfigurationTable); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } } // // Report Status Code here for DXE_ENTRY_POINT once it is available // REPORT_STATUS_CODE ( EFI_PROGRESS_CODE, (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_ENTRY_POINT) ); // // Create the aligned system table pointer structure that is used by external // debuggers to locate the system table... Also, install debug image info // configuration table. // CoreInitializeDebugImageInfoTable (); CoreNewDebugImageInfoEntry ( EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL, gDxeCoreLoadedImage, gDxeCoreImageHandle ); /* DEBUG ((DEBUG_INFO | DEBUG_LOAD, "HOBLIST address in DXE = 0x%p\n", HobStart)); DEBUG_CODE_BEGIN (); EFI_PEI_HOB_POINTERS Hob; for (Hob.Raw = HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw = GET_NEXT_HOB(Hob)) { if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_MEMORY_ALLOCATION) { DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Memory Allocation 0x%08x 0x%0lx - 0x%0lx\n", \ Hob.MemoryAllocation->AllocDescriptor.MemoryType, \ Hob.MemoryAllocation->AllocDescriptor.MemoryBaseAddress, \ Hob.MemoryAllocation->AllocDescriptor.MemoryBaseAddress + Hob.MemoryAllocation->AllocDescriptor.MemoryLength - 1)); } } for (Hob.Raw = HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw = GET_NEXT_HOB(Hob)) { if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_FV2) { DEBUG ((DEBUG_INFO | DEBUG_LOAD, "FV2 Hob 0x%0lx - 0x%0lx\n", Hob.FirmwareVolume2->BaseAddress, Hob.FirmwareVolume2->BaseAddress + Hob.FirmwareVolume2->Length - 1)); } else if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_FV) { DEBUG ((DEBUG_INFO | DEBUG_LOAD, "FV Hob 0x%0lx - 0x%0lx\n", Hob.FirmwareVolume->BaseAddress, Hob.FirmwareVolume->BaseAddress + Hob.FirmwareVolume2->Length - 1)); } } DEBUG_CODE_END (); */ // // Initialize the Event Services // Status = CoreInitializeEventServices (); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Get persisted vector hand-off info from GUIDeed HOB again due to HobStart may be updated, // and install configuration table // GuidHob = GetNextGuidHob (&gEfiVectorHandoffInfoPpiGuid, HobStart); if (GuidHob != NULL) { VectorInfoList = (EFI_VECTOR_HANDOFF_INFO *) (GET_GUID_HOB_DATA(GuidHob)); VectorInfo = VectorInfoList; Index = 1; while (VectorInfo->Attribute != EFI_VECTOR_HANDOFF_LAST_ENTRY) { VectorInfo ++; Index ++; } VectorInfo = AllocateCopyPool(sizeof (EFI_VECTOR_HANDOFF_INFO) * Index, (VOID *) VectorInfoList); // ASSERT (VectorInfo != NULL); if (!VectorInfo) return; Status = CoreInstallConfigurationTable (&gEfiVectorHandoffTableGuid, (VOID *) VectorInfo); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } } // // Get the Protocols that were passed in from PEI to DXE through GUIDed HOBs // // These Protocols are not architectural. This implementation is sharing code between // PEI and DXE in order to save FLASH space. These Protocols could also be implemented // as part of the DXE Core. However, that would also require the DXE Core to be ported // each time a different CPU is used, a different Decompression algorithm is used, or a // different Image type is used. By placing these Protocols in PEI, the DXE Core remains // generic, and only PEI and the Arch Protocols need to be ported from Platform to Platform, // and from CPU to CPU. // // // Publish the EFI, Tiano, and Custom Decompress protocols for use by other DXE components // Status = CoreInstallMultipleProtocolInterfaces ( &mDecompressHandle, &gEfiDecompressProtocolGuid, &gEfiDecompress, NULL ); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Register for the GUIDs of the Architectural Protocols, so the rest of the // EFI Boot Services and EFI Runtime Services tables can be filled in. // Also register for the GUIDs of optional protocols. // CoreNotifyOnProtocolInstallation (); // // Produce Firmware Volume Protocols, one for each FV in the HOB list. // Status = FwVolBlockDriverInit (gDxeCoreImageHandle, gDxeCoreST); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } Status = FwVolDriverInit (gDxeCoreImageHandle, gDxeCoreST); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Produce the Section Extraction Protocol // Status = InitializeSectionExtraction (gDxeCoreImageHandle, gDxeCoreST); // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Initialize the DXE Dispatcher // PERF_START (NULL,"CoreInitializeDispatcher", "DxeMain", 0) ; CoreInitializeDispatcher (); PERF_END (NULL,"CoreInitializeDispatcher", "DxeMain", 0) ; // // Invoke the DXE Dispatcher // PERF_START (NULL, "CoreDispatcher", "DxeMain", 0); CoreDispatcher (); PERF_END (NULL, "CoreDispatcher", "DxeMain", 0); // // Display Architectural protocols that were not loaded if this is DEBUG build // DEBUG_CODE_BEGIN (); CoreDisplayMissingArchProtocols (); DEBUG_CODE_END (); // // Display any drivers that were not dispatched because dependency expression // evaluated to false if this is a debug build // DEBUG_CODE_BEGIN (); CoreDisplayDiscoveredNotDispatched (); DEBUG_CODE_END (); // // Assert if the Architectural Protocols are not present. // Status = CoreAllEfiServicesAvailable (); if (EFI_ERROR(Status)) { // // Report Status code that some Architectural Protocols are not present. // REPORT_STATUS_CODE ( EFI_ERROR_CODE | EFI_ERROR_MAJOR, (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_EC_NO_ARCH) ); } // ASSERT_EFI_ERROR(Status); if (EFI_ERROR(Status)) { return; } // // Report Status code before transfer control to BDS // REPORT_STATUS_CODE ( EFI_PROGRESS_CODE, (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_HANDOFF_TO_NEXT) ); // // Transfer control to the BDS Architectural Protocol // gBds->Entry (gBds); // // BDS should never return // // ASSERT (FALSE); // CpuDeadLoop (); } /** Place holder function until all the Boot Services and Runtime Services are available. @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg0 ( VOID ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Place holder function until all the Boot Services and Runtime Services are available. @param Arg1 Undefined @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg1 ( UINTN Arg1 ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Place holder function until all the Boot Services and Runtime Services are available. @param Arg1 Undefined @param Arg2 Undefined @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg2 ( UINTN Arg1, UINTN Arg2 ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Place holder function until all the Boot Services and Runtime Services are available. @param Arg1 Undefined @param Arg2 Undefined @param Arg3 Undefined @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg3 ( UINTN Arg1, UINTN Arg2, UINTN Arg3 ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Place holder function until all the Boot Services and Runtime Services are available. @param Arg1 Undefined @param Arg2 Undefined @param Arg3 Undefined @param Arg4 Undefined @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg4 ( UINTN Arg1, UINTN Arg2, UINTN Arg3, UINTN Arg4 ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Place holder function until all the Boot Services and Runtime Services are available. @param Arg1 Undefined @param Arg2 Undefined @param Arg3 Undefined @param Arg4 Undefined @param Arg5 Undefined @return EFI_NOT_AVAILABLE_YET **/ EFI_STATUS EFIAPI CoreEfiNotAvailableYetArg5 ( UINTN Arg1, UINTN Arg2, UINTN Arg3, UINTN Arg4, UINTN Arg5 ) { // // This function should never be executed. If it does, then the architectural protocols // have not been designed correctly. The CpuBreakpoint () is commented out for now until the // DXE Core and all the Architectural Protocols are complete. // return EFI_NOT_AVAILABLE_YET; } /** Calcualte the 32-bit CRC in a EFI table using the service provided by the gRuntime service. @param Hdr Pointer to an EFI standard header **/ VOID CalculateEfiHdrCrc ( IN OUT EFI_TABLE_HEADER *Hdr ) { UINT32 Crc; Hdr->CRC32 = 0; // // If gBS->CalculateCrce32 () == CoreEfiNotAvailableYet () then // Crc will come back as zero if we set it to zero here // Crc = 0; gBS->CalculateCrc32 ((UINT8 *)Hdr, Hdr->HeaderSize, &Crc); Hdr->CRC32 = Crc; } /** Terminates all boot services. @param ImageHandle Handle that identifies the exiting image. @param MapKey Key to the latest memory map. @retval EFI_SUCCESS Boot Services terminated @retval EFI_INVALID_PARAMETER MapKey is incorrect. **/ EFI_STATUS EFIAPI CoreExitBootServices ( IN EFI_HANDLE ImageHandle, IN UINTN MapKey ) { EFI_STATUS Status; // // Disable Timer // gTimer->SetTimerPeriod (gTimer, 0); // // Terminate memory services if the MapKey matches // Status = CoreTerminateMemoryMap (MapKey); if (EFI_ERROR(Status)) { // // Notify other drivers that ExitBootServices fail // CoreNotifySignalList (&gEventExitBootServicesFailedGuid); return Status; } // // Notify other drivers that we are exiting boot services. // CoreNotifySignalList (&gEfiEventExitBootServicesGuid); // // Disable interrupt of Debug timer. // SaveAndSetDebugTimerInterrupt (FALSE); // // Disable CPU Interrupts // gCpu->DisableInterrupt (gCpu); // // Report that ExitBootServices() has been called // REPORT_STATUS_CODE ( EFI_PROGRESS_CODE, (EFI_SOFTWARE_EFI_BOOT_SERVICE | EFI_SW_BS_PC_EXIT_BOOT_SERVICES) ); // // Clear the non-runtime values of the EFI System Table // gDxeCoreST->BootServices = NULL; gDxeCoreST->ConIn = NULL; gDxeCoreST->ConsoleInHandle = NULL; gDxeCoreST->ConOut = NULL; gDxeCoreST->ConsoleOutHandle = NULL; gDxeCoreST->StdErr = NULL; gDxeCoreST->StandardErrorHandle = NULL; // // Recompute the 32-bit CRC of the EFI System Table // CalculateEfiHdrCrc (&gDxeCoreST->Hdr); // // Zero out the Boot Service Table // ZeroMem (gBS, sizeof (EFI_BOOT_SERVICES)); gBS = NULL; // // Update the AtRuntime field in Runtiem AP. // gRuntime->AtRuntime = TRUE; return Status; } /** Given a compressed source buffer, this function retrieves the size of the uncompressed buffer and the size of the scratch buffer required to decompress the compressed source buffer. The GetInfo() function retrieves the size of the uncompressed buffer and the temporary scratch buffer required to decompress the buffer specified by Source and SourceSize. If the size of the uncompressed buffer or the size of the scratch buffer cannot be determined from the compressed data specified by Source and SourceData, then EFI_INVALID_PARAMETER is returned. Otherwise, the size of the uncompressed buffer is returned in DestinationSize, the size of the scratch buffer is returned in ScratchSize, and EFI_SUCCESS is returned. The GetInfo() function does not have scratch buffer available to perform a thorough checking of the validity of the source data. It just retrieves the "Original Size" field from the beginning bytes of the source data and output it as DestinationSize. And ScratchSize is specific to the decompression implementation. @param This A pointer to the EFI_DECOMPRESS_PROTOCOL instance. @param Source The source buffer containing the compressed data. @param SourceSize The size, in bytes, of the source buffer. @param DestinationSize A pointer to the size, in bytes, of the uncompressed buffer that will be generated when the compressed buffer specified by Source and SourceSize is decompressed. @param ScratchSize A pointer to the size, in bytes, of the scratch buffer that is required to decompress the compressed buffer specified by Source and SourceSize. @retval EFI_SUCCESS The size of the uncompressed data was returned in DestinationSize and the size of the scratch buffer was returned in ScratchSize. @retval EFI_INVALID_PARAMETER The size of the uncompressed data or the size of the scratch buffer cannot be determined from the compressed data specified by Source and SourceSize. **/ EFI_STATUS EFIAPI DxeMainUefiDecompressGetInfo ( IN EFI_DECOMPRESS_PROTOCOL *This, IN VOID *Source, IN UINT32 SourceSize, OUT UINT32 *DestinationSize, OUT UINT32 *ScratchSize ) { if (Source == NULL || DestinationSize == NULL || ScratchSize == NULL) { return EFI_INVALID_PARAMETER; } return UefiDecompressGetInfo (Source, SourceSize, DestinationSize, ScratchSize); } /** Decompresses a compressed source buffer. The Decompress() function extracts decompressed data to its original form. This protocol is designed so that the decompression algorithm can be implemented without using any memory services. As a result, the Decompress() Function is not allowed to call AllocatePool() or AllocatePages() in its implementation. It is the caller's responsibility to allocate and free the Destination and Scratch buffers. If the compressed source data specified by Source and SourceSize is sucessfully decompressed into Destination, then EFI_SUCCESS is returned. If the compressed source data specified by Source and SourceSize is not in a valid compressed data format, then EFI_INVALID_PARAMETER is returned. @param This A pointer to the EFI_DECOMPRESS_PROTOCOL instance. @param Source The source buffer containing the compressed data. @param SourceSize SourceSizeThe size of source data. @param Destination On output, the destination buffer that contains the uncompressed data. @param DestinationSize The size of the destination buffer. The size of the destination buffer needed is obtained from EFI_DECOMPRESS_PROTOCOL.GetInfo(). @param Scratch A temporary scratch buffer that is used to perform the decompression. @param ScratchSize The size of scratch buffer. The size of the scratch buffer needed is obtained from GetInfo(). @retval EFI_SUCCESS Decompression completed successfully, and the uncompressed buffer is returned in Destination. @retval EFI_INVALID_PARAMETER The source buffer specified by Source and SourceSize is corrupted (not in a valid compressed format). **/ EFI_STATUS EFIAPI DxeMainUefiDecompress ( IN EFI_DECOMPRESS_PROTOCOL *This, IN VOID *Source, IN UINT32 SourceSize, IN OUT VOID *Destination, IN UINT32 DestinationSize, IN OUT VOID *Scratch, IN UINT32 ScratchSize ) { EFI_STATUS Status; UINT32 TestDestinationSize; UINT32 TestScratchSize; if (Source == NULL || Destination== NULL || Scratch == NULL) { return EFI_INVALID_PARAMETER; } Status = UefiDecompressGetInfo (Source, SourceSize, &TestDestinationSize, &TestScratchSize); if (EFI_ERROR(Status)) { return Status; } if (ScratchSize < TestScratchSize || DestinationSize < TestDestinationSize) { return RETURN_INVALID_PARAMETER; } return UefiDecompress (Source, Destination, Scratch); }