/** @file
  PCI emumeration support functions implementation for PCI Bus module.

Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "PciBus.h"

extern CHAR16  *mBarTypeStr[];

#define OLD_ALIGN   0xFFFFFFFFFFFFFFFFULL
#define EVEN_ALIGN  0xFFFFFFFFFFFFFFFEULL
#define SQUAD_ALIGN 0xFFFFFFFFFFFFFFFDULL
#define DQUAD_ALIGN 0xFFFFFFFFFFFFFFFCULL

/**
  This routine is used to check whether the pci device is present.

  @param PciRootBridgeIo   Pointer to instance of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
  @param Pci               Output buffer for PCI device configuration space.
  @param Bus               PCI bus NO.
  @param Device            PCI device NO.
  @param Func              PCI Func NO.

  @retval EFI_NOT_FOUND    PCI device not present.
  @retval EFI_SUCCESS      PCI device is found.

**/
EFI_STATUS
PciDevicePresent (
  IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL     *PciRootBridgeIo,
  OUT PCI_TYPE00                          *Pci,
  IN  UINT8                               Bus,
  IN  UINT8                               Device,
  IN  UINT8                               Func
  )
{
  UINT64      Address;
  EFI_STATUS  Status;

  //
  // Create PCI address map in terms of Bus, Device and Func
  //
  Address = EFI_PCI_ADDRESS (Bus, Device, Func, 0);

  //
  // Read the Vendor ID register
  //
  Status = PciRootBridgeIo->Pci.Read (
                                  PciRootBridgeIo,
                                  EfiPciWidthUint32,
                                  Address,
                                  1,
                                  Pci
                                  );

  if (!EFI_ERROR (Status) && (Pci->Hdr).VendorId != 0xffff) {
    //
    // Read the entire config header for the device
    //
    Status = PciRootBridgeIo->Pci.Read (
                                    PciRootBridgeIo,
                                    EfiPciWidthUint32,
                                    Address,
                                    sizeof (PCI_TYPE00) / sizeof (UINT32),
                                    Pci
                                    );

    return EFI_SUCCESS;
  }

  return EFI_NOT_FOUND;
}

/**
  Collect all the resource information under this root bridge.

  A database that records all the information about pci device subject to this
  root bridge will then be created.

  @param Bridge         Parent bridge instance.
  @param StartBusNumber Bus number of beginning.

  @retval EFI_SUCCESS   PCI device is found.
  @retval other         Some error occurred when reading PCI bridge information.

**/
EFI_STATUS
PciPciDeviceInfoCollector (
  IN PCI_IO_DEVICE                      *Bridge,
  IN UINT8                              StartBusNumber
  )
{
  EFI_STATUS          Status;
  PCI_TYPE00          Pci;
  UINT8               Device;
  UINT8               Func;
  UINT8               SecBus;
  PCI_IO_DEVICE       *PciIoDevice;
  EFI_PCI_IO_PROTOCOL *PciIo;

  Status  = EFI_SUCCESS;
  SecBus  = 0;

  for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {

    for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {

      //
      // Check to see whether PCI device is present
      //
      Status = PciDevicePresent (
                 Bridge->PciRootBridgeIo,
                 &Pci,
                 (UINT8) StartBusNumber,
                 (UINT8) Device,
                 (UINT8) Func
                 );

      if (EFI_ERROR (Status) && Func == 0) {
        //
        // go to next device if there is no Function 0
        //
        break;
      }

      if (!EFI_ERROR (Status)) {

        //
        // Call back to host bridge function
        //
        PreprocessController (Bridge, (UINT8) StartBusNumber, Device, Func, EfiPciBeforeResourceCollection);

        //
        // Collect all the information about the PCI device discovered
        //
        Status = PciSearchDevice (
                   Bridge,
                   &Pci,
                   (UINT8) StartBusNumber,
                   Device,
                   Func,
                   &PciIoDevice
                   );

        //
        // Recursively scan PCI busses on the other side of PCI-PCI bridges
        //
        //
        if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci) || IS_CARDBUS_BRIDGE (&Pci))) {

          //
          // If it is PPB, we need to get the secondary bus to continue the enumeration
          //
          PciIo   = &(PciIoDevice->PciIo);

          Status  = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET, 1, &SecBus);

          if (EFI_ERROR (Status)) {
            return Status;
          }

          //
          // Ensure secondary bus number is greater than the primary bus number to avoid
          // any potential dead loop when PcdPciDisableBusEnumeration is set to TRUE
          //
          if (SecBus <= StartBusNumber) {
            break;
          }

          //
          // Get resource padding for PPB
          //
          GetResourcePaddingPpb (PciIoDevice);

          //
          // Deep enumerate the next level bus
          //
          Status = PciPciDeviceInfoCollector (
                     PciIoDevice,
                     (UINT8) (SecBus)
                     );

        }

        if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {

          //
          // Skip sub functions, this is not a multi function device
          //
          Func = PCI_MAX_FUNC;
        }
      }

    }
  }

  return EFI_SUCCESS;
}

/**
  Search required device and create PCI device instance.

  @param Bridge     Parent bridge instance.
  @param Pci        Input PCI device information block.
  @param Bus        PCI bus NO.
  @param Device     PCI device NO.
  @param Func       PCI func  NO.
  @param PciDevice  Output of searched PCI device instance.

  @retval EFI_SUCCESS           Successfully created PCI device instance.
  @retval EFI_OUT_OF_RESOURCES  Cannot get PCI device information.

**/
EFI_STATUS
PciSearchDevice (
  IN  PCI_IO_DEVICE                         *Bridge,
  IN  PCI_TYPE00                            *Pci,
  IN  UINT8                                 Bus,
  IN  UINT8                                 Device,
  IN  UINT8                                 Func,
  OUT PCI_IO_DEVICE                         **PciDevice
  )
{
  PCI_IO_DEVICE *PciIoDevice;

  PciIoDevice = NULL;

  DEBUG ((
    EFI_D_INFO,
    "PciBus: Discovered %s @ [%02x|%02x|%02x]\n",
    IS_PCI_BRIDGE (Pci) ?     L"PPB" :
    IS_CARDBUS_BRIDGE (Pci) ? L"P2C" :
                              L"PCI",
    Bus, Device, Func
    ));

  if (!IS_PCI_BRIDGE (Pci)) {

    if (IS_CARDBUS_BRIDGE (Pci)) {
      PciIoDevice = GatherP2CInfo (
                      Bridge,
                      Pci,
                      Bus,
                      Device,
                      Func
                      );
      if ((PciIoDevice != NULL) && gFullEnumeration) {
        InitializeP2C (PciIoDevice);
      }
    } else {

      //
      // Create private data for Pci Device
      //
      PciIoDevice = GatherDeviceInfo (
                      Bridge,
                      Pci,
                      Bus,
                      Device,
                      Func
                      );

    }

  } else {

    //
    // Create private data for PPB
    //
    PciIoDevice = GatherPpbInfo (
                    Bridge,
                    Pci,
                    Bus,
                    Device,
                    Func
                    );

    //
    // Special initialization for PPB including making the PPB quiet
    //
    if ((PciIoDevice != NULL) && gFullEnumeration) {
      InitializePpb (PciIoDevice);
    }
  }

  if (PciIoDevice == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  //
  // Update the bar information for this PCI device so as to support some specific device
  //
  UpdatePciInfo (PciIoDevice);

  if (PciIoDevice->DevicePath == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  //
  // Detect this function has option rom
  //
  if (gFullEnumeration) {

    if (!IS_CARDBUS_BRIDGE (Pci)) {

      GetOpRomInfo (PciIoDevice);

    }

    ResetPowerManagementFeature (PciIoDevice);

  }

  //
  // Insert it into a global tree for future reference
  //
  InsertPciDevice (Bridge, PciIoDevice);

  //
  // Determine PCI device attributes
  //

  if (PciDevice != NULL) {
    *PciDevice = PciIoDevice;
  }

  return EFI_SUCCESS;
}

/**
  Dump the PPB padding resource information.

  @param PciIoDevice     PCI IO instance.
  @param ResourceType    The desired resource type to dump.
                         PciBarTypeUnknown means to dump all types of resources.
**/
VOID
DumpPpbPaddingResource (
  IN PCI_IO_DEVICE                    *PciIoDevice,
  IN PCI_BAR_TYPE                     ResourceType
  )
{
  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;
  PCI_BAR_TYPE                      Type;

  if (PciIoDevice->ResourcePaddingDescriptors == NULL) {
    return;
  }

  if (ResourceType == PciBarTypeIo16 || ResourceType == PciBarTypeIo32) {
    ResourceType = PciBarTypeIo;
  }

  for (Descriptor = PciIoDevice->ResourcePaddingDescriptors; Descriptor->Desc != ACPI_END_TAG_DESCRIPTOR; Descriptor++) {

    Type = PciBarTypeUnknown;
    if (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_IO) {
      Type = PciBarTypeIo;
    } else if (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {

      if (Descriptor->AddrSpaceGranularity == 32) {
        //
        // prefetchable
        //
        if (Descriptor->SpecificFlag == EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) {
          Type = PciBarTypePMem32;
        }

        //
        // Non-prefetchable
        //
        if (Descriptor->SpecificFlag == 0) {
          Type = PciBarTypeMem32;
        }
      }

      if (Descriptor->AddrSpaceGranularity == 64) {
        //
        // prefetchable
        //
        if (Descriptor->SpecificFlag == EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) {
          Type = PciBarTypePMem64;
        }

        //
        // Non-prefetchable
        //
        if (Descriptor->SpecificFlag == 0) {
          Type = PciBarTypeMem64;
        }
      }
    }

    if ((Type != PciBarTypeUnknown) && ((ResourceType == PciBarTypeUnknown) || (ResourceType == Type))) {
      DEBUG ((
        EFI_D_INFO,
        "   Padding: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx\n",
        mBarTypeStr[Type], Descriptor->AddrRangeMax, Descriptor->AddrLen
        ));
    }
  }

}

/**
  Dump the PCI BAR information.

  @param PciIoDevice     PCI IO instance.
**/
VOID
DumpPciBars (
  IN PCI_IO_DEVICE                    *PciIoDevice
  )
{
  UINTN                               Index;

  for (Index = 0; Index < PCI_MAX_BAR; Index++) {
    if (PciIoDevice->PciBar[Index].BarType == PciBarTypeUnknown) {
      continue;
    }

    DEBUG ((
      EFI_D_INFO,
      "   BAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset = 0x%02x\n",
      Index, mBarTypeStr[MIN (PciIoDevice->PciBar[Index].BarType, PciBarTypeMaxType)],
      PciIoDevice->PciBar[Index].Alignment, PciIoDevice->PciBar[Index].Length, PciIoDevice->PciBar[Index].Offset
      ));
  }

  for (Index = 0; Index < PCI_MAX_BAR; Index++) {
    if ((PciIoDevice->VfPciBar[Index].BarType == PciBarTypeUnknown) && (PciIoDevice->VfPciBar[Index].Length == 0)) {
      continue;
    }

    DEBUG ((
      EFI_D_INFO,
      " VFBAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset = 0x%02x\n",
      Index, mBarTypeStr[MIN (PciIoDevice->VfPciBar[Index].BarType, PciBarTypeMaxType)],
      PciIoDevice->VfPciBar[Index].Alignment, PciIoDevice->VfPciBar[Index].Length, PciIoDevice->VfPciBar[Index].Offset
      ));
  }
  DEBUG ((EFI_D_INFO, "\n"));
}

/**
  Create PCI device instance for PCI device.

  @param Bridge   Parent bridge instance.
  @param Pci      Input PCI device information block.
  @param Bus      PCI device Bus NO.
  @param Device   PCI device Device NO.
  @param Func     PCI device's func NO.

  @return  Created PCI device instance.

**/
PCI_IO_DEVICE *
GatherDeviceInfo (
  IN PCI_IO_DEVICE                    *Bridge,
  IN PCI_TYPE00                       *Pci,
  IN UINT8                            Bus,
  IN UINT8                            Device,
  IN UINT8                            Func
  )
{
  UINTN                           Offset;
  UINTN                           BarIndex;
  PCI_IO_DEVICE                   *PciIoDevice;

  PciIoDevice = CreatePciIoDevice (
                  Bridge,
                  Pci,
                  Bus,
                  Device,
                  Func
                  );

  if (PciIoDevice == NULL) {
    return NULL;
  }

  //
  // If it is a full enumeration, disconnect the device in advance
  //
  if (gFullEnumeration) {

    PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);

  }

  //
  // Start to parse the bars
  //
  for (Offset = 0x10, BarIndex = 0; Offset <= 0x24 && BarIndex < PCI_MAX_BAR; BarIndex++) {
    Offset = PciParseBar (PciIoDevice, Offset, BarIndex);
  }

  //
  // Parse the SR-IOV VF bars
  //
  if (PcdGetBool (PcdSrIovSupport) && PciIoDevice->SrIovCapabilityOffset != 0) {
    for (Offset = PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_BAR0, BarIndex = 0;
         Offset <= PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_BAR5;
         BarIndex++) {

      ASSERT (BarIndex < PCI_MAX_BAR);
      Offset = PciIovParseVfBar (PciIoDevice, Offset, BarIndex);
    }
  }

  DEBUG_CODE (DumpPciBars (PciIoDevice););
  return PciIoDevice;
}

/**
  Create PCI device instance for PCI-PCI bridge.

  @param Bridge   Parent bridge instance.
  @param Pci      Input PCI device information block.
  @param Bus      PCI device Bus NO.
  @param Device   PCI device Device NO.
  @param Func     PCI device's func NO.

  @return  Created PCI device instance.

**/
PCI_IO_DEVICE *
GatherPpbInfo (
  IN PCI_IO_DEVICE                    *Bridge,
  IN PCI_TYPE00                       *Pci,
  IN UINT8                            Bus,
  IN UINT8                            Device,
  IN UINT8                            Func
  )
{
  PCI_IO_DEVICE                   *PciIoDevice;
  EFI_STATUS                      Status;
  UINT8                           Value;
  EFI_PCI_IO_PROTOCOL             *PciIo;
  UINT8                           Temp;
  UINT32                          PMemBaseLimit;
  UINT16                          PrefetchableMemoryBase;
  UINT16                          PrefetchableMemoryLimit;

  PciIoDevice = CreatePciIoDevice (
                  Bridge,
                  Pci,
                  Bus,
                  Device,
                  Func
                  );

  if (PciIoDevice == NULL) {
    return NULL;
  }

  if (gFullEnumeration) {
    PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);

    //
    // Initialize the bridge control register
    //
    PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_BITS_OWNED);

  }

  //
  // PPB can have two BARs
  //
  if (PciParseBar (PciIoDevice, 0x10, PPB_BAR_0) == 0x14) {
    //
    // Not 64-bit bar
    //
    PciParseBar (PciIoDevice, 0x14, PPB_BAR_1);
  }

  PciIo = &PciIoDevice->PciIo;

  //
  // Test whether it support 32 decode or not
  //
  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);
  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);

  if (Value != 0) {
    if ((Value & 0x01) != 0) {
      PciIoDevice->Decodes |= EFI_BRIDGE_IO32_DECODE_SUPPORTED;
    } else {
      PciIoDevice->Decodes |= EFI_BRIDGE_IO16_DECODE_SUPPORTED;
    }
  }

  //
  // if PcdPciBridgeIoAlignmentProbe is TRUE, PCI bus driver probes
  // PCI bridge supporting non-standard I/O window alignment less than 4K.
  //

  PciIoDevice->BridgeIoAlignment = 0xFFF;
  if (FeaturePcdGet (PcdPciBridgeIoAlignmentProbe)) {
    //
    // Check any bits of bit 3-1 of I/O Base Register are writable.
    // if so, it is assumed non-standard I/O window alignment is supported by this bridge.
    // Per spec, bit 3-1 of I/O Base Register are reserved bits, so its content can't be assumed.
    //
    Value = (UINT8)(Temp ^ (BIT3 | BIT2 | BIT1));
    PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);
    PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);
    PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);
    Value = (UINT8)((Value ^ Temp) & (BIT3 | BIT2 | BIT1));
    switch (Value) {
      case BIT3:
        PciIoDevice->BridgeIoAlignment = 0x7FF;
        break;
      case BIT3 | BIT2:
        PciIoDevice->BridgeIoAlignment = 0x3FF;
        break;
      case BIT3 | BIT2 | BIT1:
        PciIoDevice->BridgeIoAlignment = 0x1FF;
        break;
    }
  }

  Status = BarExisted (
            PciIoDevice,
            0x24,
            NULL,
            &PMemBaseLimit
            );

  //
  // Test if it supports 64 memory or not
  //
  // The bottom 4 bits of both the Prefetchable Memory Base and Prefetchable Memory Limit
  // registers:
  //   0 - the bridge supports only 32 bit addresses.
  //   1 - the bridge supports 64-bit addresses.
  //
  PrefetchableMemoryBase = (UINT16)(PMemBaseLimit & 0xffff);
  PrefetchableMemoryLimit = (UINT16)(PMemBaseLimit >> 16);
  if (!EFI_ERROR (Status) &&
      (PrefetchableMemoryBase & 0x000f) == 0x0001 &&
      (PrefetchableMemoryLimit & 0x000f) == 0x0001) {
    Status = BarExisted (
              PciIoDevice,
              0x28,
              NULL,
              NULL
              );

    if (!EFI_ERROR (Status)) {
      PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;
      PciIoDevice->Decodes |= EFI_BRIDGE_PMEM64_DECODE_SUPPORTED;
    } else {
      PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;
    }
  }

  //
  // Memory 32 code is required for ppb
  //
  PciIoDevice->Decodes |= EFI_BRIDGE_MEM32_DECODE_SUPPORTED;

  GetResourcePaddingPpb (PciIoDevice);

  DEBUG_CODE (
    DumpPpbPaddingResource (PciIoDevice, PciBarTypeUnknown);
    DumpPciBars (PciIoDevice);
  );

  return PciIoDevice;
}


/**
  Create PCI device instance for PCI Card bridge device.

  @param Bridge   Parent bridge instance.
  @param Pci      Input PCI device information block.
  @param Bus      PCI device Bus NO.
  @param Device   PCI device Device NO.
  @param Func     PCI device's func NO.

  @return  Created PCI device instance.

**/
PCI_IO_DEVICE *
GatherP2CInfo (
  IN PCI_IO_DEVICE                    *Bridge,
  IN PCI_TYPE00                       *Pci,
  IN UINT8                            Bus,
  IN UINT8                            Device,
  IN UINT8                            Func
  )
{
  PCI_IO_DEVICE                   *PciIoDevice;

  PciIoDevice = CreatePciIoDevice (
                  Bridge,
                  Pci,
                  Bus,
                  Device,
                  Func
                  );

  if (PciIoDevice == NULL) {
    return NULL;
  }

  if (gFullEnumeration) {
    PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);

    //
    // Initialize the bridge control register
    //
    PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCCARD_BRIDGE_CONTROL_BITS_OWNED);
  }

  //
  // P2C only has one bar that is in 0x10
  //
  PciParseBar (PciIoDevice, 0x10, P2C_BAR_0);

  //
  // Read PciBar information from the bar register
  //
  GetBackPcCardBar (PciIoDevice);
  PciIoDevice->Decodes = EFI_BRIDGE_MEM32_DECODE_SUPPORTED  |
                         EFI_BRIDGE_PMEM32_DECODE_SUPPORTED |
                         EFI_BRIDGE_IO32_DECODE_SUPPORTED;

  DEBUG_CODE (DumpPciBars (PciIoDevice););

  return PciIoDevice;
}

/**
  Create device path for pci device.

  @param ParentDevicePath  Parent bridge's path.
  @param PciIoDevice       Pci device instance.

  @return Device path protocol instance for specific pci device.

**/
EFI_DEVICE_PATH_PROTOCOL *
CreatePciDevicePath (
  IN  EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
  IN  PCI_IO_DEVICE            *PciIoDevice
  )
{

  PCI_DEVICE_PATH PciNode;

  //
  // Create PCI device path
  //
  PciNode.Header.Type     = HARDWARE_DEVICE_PATH;
  PciNode.Header.SubType  = HW_PCI_DP;
  SetDevicePathNodeLength (&PciNode.Header, sizeof (PciNode));

  PciNode.Device          = PciIoDevice->DeviceNumber;
  PciNode.Function        = PciIoDevice->FunctionNumber;
  PciIoDevice->DevicePath = AppendDevicePathNode (ParentDevicePath, &PciNode.Header);

  return PciIoDevice->DevicePath;
}

/**
  Check whether the PCI IOV VF bar is existed or not.

  @param PciIoDevice       A pointer to the PCI_IO_DEVICE.
  @param Offset            The offset.
  @param BarLengthValue    The bar length value returned.
  @param OriginalBarValue  The original bar value returned.

  @retval EFI_NOT_FOUND    The bar doesn't exist.
  @retval EFI_SUCCESS      The bar exist.

**/
EFI_STATUS
VfBarExisted (
  IN PCI_IO_DEVICE *PciIoDevice,
  IN UINTN         Offset,
  OUT UINT32       *BarLengthValue,
  OUT UINT32       *OriginalBarValue
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT32              OriginalValue;
  UINT32              Value;
  EFI_TPL             OldTpl;

  //
  // Ensure it is called properly
  //
  ASSERT (PciIoDevice->SrIovCapabilityOffset != 0);
  if (PciIoDevice->SrIovCapabilityOffset == 0) {
    return EFI_NOT_FOUND;
  }

  PciIo = &PciIoDevice->PciIo;

  //
  // Preserve the original value
  //

  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &OriginalValue);

  //
  // Raise TPL to high level to disable timer interrupt while the BAR is probed
  //
  OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &gAllOne);
  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &Value);

  //
  // Write back the original value
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &OriginalValue);

  //
  // Restore TPL to its original level
  //
  gBS->RestoreTPL (OldTpl);

  if (BarLengthValue != NULL) {
    *BarLengthValue = Value;
  }

  if (OriginalBarValue != NULL) {
    *OriginalBarValue = OriginalValue;
  }

  if (Value == 0) {
    return EFI_NOT_FOUND;
  } else {
    return EFI_SUCCESS;
  }
}

/**
  Check whether the bar is existed or not.

  @param PciIoDevice       A pointer to the PCI_IO_DEVICE.
  @param Offset            The offset.
  @param BarLengthValue    The bar length value returned.
  @param OriginalBarValue  The original bar value returned.

  @retval EFI_NOT_FOUND    The bar doesn't exist.
  @retval EFI_SUCCESS      The bar exist.

**/
EFI_STATUS
BarExisted (
  IN  PCI_IO_DEVICE *PciIoDevice,
  IN  UINTN         Offset,
  OUT UINT32        *BarLengthValue,
  OUT UINT32        *OriginalBarValue
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT32              OriginalValue;
  UINT32              Value;
  EFI_TPL             OldTpl;

  PciIo = &PciIoDevice->PciIo;

  //
  // Preserve the original value
  //
  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);

  //
  // Raise TPL to high level to disable timer interrupt while the BAR is probed
  //
  OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &gAllOne);
  PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &Value);

  //
  // Write back the original value
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);

  //
  // Restore TPL to its original level
  //
  gBS->RestoreTPL (OldTpl);

  if (BarLengthValue != NULL) {
    *BarLengthValue = Value;
  }

  if (OriginalBarValue != NULL) {
    *OriginalBarValue = OriginalValue;
  }

  if (Value == 0) {
    return EFI_NOT_FOUND;
  } else {
    return EFI_SUCCESS;
  }
}

/**
  Test whether the device can support given attributes.

  @param PciIoDevice      Pci device instance.
  @param Command          Input command register value, and
                          returned supported register value.
  @param BridgeControl    Input bridge control value for PPB or P2C, and
                          returned supported bridge control value.
  @param OldCommand       Returned and stored old command register offset.
  @param OldBridgeControl Returned and stored old Bridge control value for PPB or P2C.

**/
VOID
PciTestSupportedAttribute (
  IN     PCI_IO_DEVICE                      *PciIoDevice,
  IN OUT UINT16                             *Command,
  IN OUT UINT16                             *BridgeControl,
     OUT UINT16                             *OldCommand,
     OUT UINT16                             *OldBridgeControl
  )
{
  EFI_TPL OldTpl;

  //
  // Preserve the original value
  //
  PCI_READ_COMMAND_REGISTER (PciIoDevice, OldCommand);

  //
  // Raise TPL to high level to disable timer interrupt while the BAR is probed
  //
  OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);

  PCI_SET_COMMAND_REGISTER (PciIoDevice, *Command);
  PCI_READ_COMMAND_REGISTER (PciIoDevice, Command);

  //
  // Write back the original value
  //
  PCI_SET_COMMAND_REGISTER (PciIoDevice, *OldCommand);

  //
  // Restore TPL to its original level
  //
  gBS->RestoreTPL (OldTpl);

  if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {

    //
    // Preserve the original value
    //
    PCI_READ_BRIDGE_CONTROL_REGISTER (PciIoDevice, OldBridgeControl);

    //
    // Raise TPL to high level to disable timer interrupt while the BAR is probed
    //
    OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);

    PCI_SET_BRIDGE_CONTROL_REGISTER (PciIoDevice, *BridgeControl);
    PCI_READ_BRIDGE_CONTROL_REGISTER (PciIoDevice, BridgeControl);

    //
    // Write back the original value
    //
    PCI_SET_BRIDGE_CONTROL_REGISTER (PciIoDevice, *OldBridgeControl);

    //
    // Restore TPL to its original level
    //
    gBS->RestoreTPL (OldTpl);

  } else {
    *OldBridgeControl = 0;
    *BridgeControl    = 0;
  }
}

/**
  Set the supported or current attributes of a PCI device.

  @param PciIoDevice    Structure pointer for PCI device.
  @param Command        Command register value.
  @param BridgeControl  Bridge control value for PPB or P2C.
  @param Option         Make a choice of EFI_SET_SUPPORTS or EFI_SET_ATTRIBUTES.

**/
VOID
PciSetDeviceAttribute (
  IN PCI_IO_DEVICE                      *PciIoDevice,
  IN UINT16                             Command,
  IN UINT16                             BridgeControl,
  IN UINTN                              Option
  )
{
  UINT64  Attributes;

  Attributes = 0;

  if ((Command & EFI_PCI_COMMAND_IO_SPACE) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_IO;
  }

  if ((Command & EFI_PCI_COMMAND_MEMORY_SPACE) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_MEMORY;
  }

  if ((Command & EFI_PCI_COMMAND_BUS_MASTER) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_BUS_MASTER;
  }

  if ((Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;
  }

  if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_IO;
  }

  if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO;
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY;
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;
  }

  if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA_16) != 0) {
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO_16;
    Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16;
  }

  if (Option == EFI_SET_SUPPORTS) {

    Attributes |= (UINT64) (EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE |
                  EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED        |
                  EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE       |
                  EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE      |
                  EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM         |
                  EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE);

    if (IS_PCI_LPC (&PciIoDevice->Pci)) {
        Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO;
        Attributes |= (mReserveIsaAliases ? (UINT64) EFI_PCI_IO_ATTRIBUTE_ISA_IO : \
                                            (UINT64) EFI_PCI_IO_ATTRIBUTE_ISA_IO_16);
    }

    if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {
      //
      // For bridge, it should support IDE attributes
      //
      Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO;
      Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO;

      if (mReserveVgaAliases) {
        Attributes &= ~(UINT64)(EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 | \
                                EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16);
      } else {
        Attributes &= ~(UINT64)(EFI_PCI_IO_ATTRIBUTE_VGA_IO | \
                                EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO);
      }
    } else {

      if (IS_PCI_IDE (&PciIoDevice->Pci)) {
        Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO;
        Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO;
      }

      if (IS_PCI_VGA (&PciIoDevice->Pci)) {
        Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY;
        Attributes |= (mReserveVgaAliases ? (UINT64) EFI_PCI_IO_ATTRIBUTE_VGA_IO : \
                                            (UINT64) EFI_PCI_IO_ATTRIBUTE_VGA_IO_16);
      }
    }

    PciIoDevice->Supports = Attributes;
    PciIoDevice->Supports &= ( (PciIoDevice->Parent->Supports) | \
                               EFI_PCI_IO_ATTRIBUTE_IO | EFI_PCI_IO_ATTRIBUTE_MEMORY | \
                               EFI_PCI_IO_ATTRIBUTE_BUS_MASTER );

  } else {
    //
    // When this attribute is clear, the RomImage and RomSize fields in the PCI IO were
    // initialized based on the PCI option ROM found through the ROM BAR of the PCI controller.
    // When this attribute is set, the PCI option ROM described by the RomImage and RomSize
    // fields is not from the the ROM BAR of the PCI controller.
    //
    if (!PciIoDevice->EmbeddedRom) {
      Attributes |= EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM;
    }
    PciIoDevice->Attributes = Attributes;
  }
}

/**
  Determine if the device can support Fast Back to Back attribute.

  @param PciIoDevice  Pci device instance.
  @param StatusIndex  Status register value.

  @retval EFI_SUCCESS       This device support Fast Back to Back attribute.
  @retval EFI_UNSUPPORTED   This device doesn't support Fast Back to Back attribute.

**/
EFI_STATUS
GetFastBackToBackSupport (
  IN PCI_IO_DEVICE                      *PciIoDevice,
  IN UINT8                              StatusIndex
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  EFI_STATUS          Status;
  UINT32              StatusRegister;

  //
  // Read the status register
  //
  PciIo   = &PciIoDevice->PciIo;
  Status  = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16, StatusIndex, 1, &StatusRegister);
  if (EFI_ERROR (Status)) {
    return EFI_UNSUPPORTED;
  }

  //
  // Check the Fast B2B bit
  //
  if ((StatusRegister & EFI_PCI_FAST_BACK_TO_BACK_CAPABLE) != 0) {
    return EFI_SUCCESS;
  } else {
    return EFI_UNSUPPORTED;
  }
}

/**
  Process the option ROM for all the children of the specified parent PCI device.
  It can only be used after the first full Option ROM process.

  @param PciIoDevice Pci device instance.

**/
VOID
ProcessOptionRomLight (
  IN PCI_IO_DEVICE                      *PciIoDevice
  )
{
  PCI_IO_DEVICE   *Temp;
  LIST_ENTRY      *CurrentLink;

  //
  // For RootBridge, PPB , P2C, go recursively to traverse all its children
  //
  CurrentLink = PciIoDevice->ChildList.ForwardLink;
  while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {

    Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);

    if (!IsListEmpty (&Temp->ChildList)) {
      ProcessOptionRomLight (Temp);
    }

    PciRomGetImageMapping (Temp);

    //
    // The OpRom has already been processed in the first round
    //
    Temp->AllOpRomProcessed = TRUE;

    CurrentLink = CurrentLink->ForwardLink;
  }
}

/**
  Determine the related attributes of all devices under a Root Bridge.

  @param PciIoDevice   PCI device instance.

**/
EFI_STATUS
DetermineDeviceAttribute (
  IN PCI_IO_DEVICE                      *PciIoDevice
  )
{
  UINT16          Command;
  UINT16          BridgeControl;
  UINT16          OldCommand;
  UINT16          OldBridgeControl;
  BOOLEAN         FastB2BSupport;
  PCI_IO_DEVICE   *Temp;
  LIST_ENTRY      *CurrentLink;
  EFI_STATUS      Status;

  //
  // For Root Bridge, just copy it by RootBridgeIo protocol
  // so as to keep consistent with the actual attribute
  //
  if (PciIoDevice->Parent == NULL) {
    Status = PciIoDevice->PciRootBridgeIo->GetAttributes (
                                            PciIoDevice->PciRootBridgeIo,
                                            &PciIoDevice->Supports,
                                            &PciIoDevice->Attributes
                                            );
    if (EFI_ERROR (Status)) {
      return Status;
    }
    //
    // Assume the PCI Root Bridge supports DAC
    //
    PciIoDevice->Supports |= (UINT64)(EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE |
                              EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM |
                              EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE);

  } else {

    //
    // Set the attributes to be checked for common PCI devices and PPB or P2C
    // Since some devices only support part of them, it is better to set the
    // attribute according to its command or bridge control register
    //
    Command = EFI_PCI_COMMAND_IO_SPACE     |
              EFI_PCI_COMMAND_MEMORY_SPACE |
              EFI_PCI_COMMAND_BUS_MASTER   |
              EFI_PCI_COMMAND_VGA_PALETTE_SNOOP;

    BridgeControl = EFI_PCI_BRIDGE_CONTROL_ISA | EFI_PCI_BRIDGE_CONTROL_VGA | EFI_PCI_BRIDGE_CONTROL_VGA_16;

    //
    // Test whether the device can support attributes above
    //
    PciTestSupportedAttribute (PciIoDevice, &Command, &BridgeControl, &OldCommand, &OldBridgeControl);

    //
    // Set the supported attributes for specified PCI device
    //
    PciSetDeviceAttribute (PciIoDevice, Command, BridgeControl, EFI_SET_SUPPORTS);

    //
    // Set the current attributes for specified PCI device
    //
    PciSetDeviceAttribute (PciIoDevice, OldCommand, OldBridgeControl, EFI_SET_ATTRIBUTES);

    //
    // Enable other PCI supported attributes but not defined in PCI_IO_PROTOCOL
    // For PCI Express devices, Memory Write and Invalidate is hardwired to 0b so only enable it for PCI devices.
    if (!PciIoDevice->IsPciExp) {
      PCI_ENABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_MEMORY_WRITE_AND_INVALIDATE);
    }
  }

  FastB2BSupport = TRUE;

  //
  // P2C can not support FB2B on the secondary side
  //
  if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {
    FastB2BSupport = FALSE;
  }

  //
  // For RootBridge, PPB , P2C, go recursively to traverse all its children
  //
  CurrentLink = PciIoDevice->ChildList.ForwardLink;
  while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {

    Temp    = PCI_IO_DEVICE_FROM_LINK (CurrentLink);
    Status  = DetermineDeviceAttribute (Temp);
    if (EFI_ERROR (Status)) {
      return Status;
    }
    //
    // Detect Fast Back to Back support for the device under the bridge
    //
    Status = GetFastBackToBackSupport (Temp, PCI_PRIMARY_STATUS_OFFSET);
    if (FastB2BSupport && EFI_ERROR (Status)) {
      FastB2BSupport = FALSE;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }
  //
  // Set or clear Fast Back to Back bit for the whole bridge
  //
  if (!IsListEmpty (&PciIoDevice->ChildList)) {

    if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {

      Status = GetFastBackToBackSupport (PciIoDevice, PCI_BRIDGE_STATUS_REGISTER_OFFSET);

      if (EFI_ERROR (Status) || (!FastB2BSupport)) {
        FastB2BSupport = FALSE;
        PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK);
      } else {
        PCI_ENABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK);
      }
    }

    CurrentLink = PciIoDevice->ChildList.ForwardLink;
    while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {
      Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);
      if (FastB2BSupport) {
        PCI_ENABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK);
      } else {
        PCI_DISABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK);
      }

      CurrentLink = CurrentLink->ForwardLink;
    }
  }
  //
  // End for IsListEmpty
  //
  return EFI_SUCCESS;
}

/**
  This routine is used to update the bar information for those incompatible PCI device.

  @param PciIoDevice      Input Pci device instance. Output Pci device instance with updated
                          Bar information.

  @retval EFI_SUCCESS     Successfully updated bar information.
  @retval EFI_UNSUPPORTED Given PCI device doesn't belong to incompatible PCI device list.

**/
EFI_STATUS
UpdatePciInfo (
  IN OUT PCI_IO_DEVICE    *PciIoDevice
  )
{
  EFI_STATUS                        Status;
  UINTN                             BarIndex;
  BOOLEAN                           SetFlag;
  VOID                              *Configuration;
  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;

  Configuration = NULL;
  Status        = EFI_SUCCESS;

  if (gIncompatiblePciDeviceSupport == NULL) {
    //
    // It can only be supported after the Incompatible PCI Device
    // Support Protocol has been installed
    //
    Status = gBS->LocateProtocol (
                    &gEfiIncompatiblePciDeviceSupportProtocolGuid,
                    NULL,
                    (VOID **) &gIncompatiblePciDeviceSupport
                    );
  }
  if (Status == EFI_SUCCESS) {
      //
      // Check whether the device belongs to incompatible devices from protocol or not
      // If it is , then get its special requirement in the ACPI table
      //
      Status = gIncompatiblePciDeviceSupport->CheckDevice (
                                                gIncompatiblePciDeviceSupport,
                                                PciIoDevice->Pci.Hdr.VendorId,
                                                PciIoDevice->Pci.Hdr.DeviceId,
                                                PciIoDevice->Pci.Hdr.RevisionID,
                                                PciIoDevice->Pci.Device.SubsystemVendorID,
                                                PciIoDevice->Pci.Device.SubsystemID,
                                                &Configuration
                                                );

  }

  if (EFI_ERROR (Status) || Configuration == NULL ) {
    return EFI_UNSUPPORTED;
  }

  //
  // Update PCI device information from the ACPI table
  //
  Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration;

  while (Ptr->Desc != ACPI_END_TAG_DESCRIPTOR) {

    if (Ptr->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
      //
      // The format is not support
      //
      break;
    }

    for (BarIndex = 0; BarIndex < PCI_MAX_BAR; BarIndex++) {
      if ((Ptr->AddrTranslationOffset != MAX_UINT64) &&
          (Ptr->AddrTranslationOffset != MAX_UINT8) &&
          (Ptr->AddrTranslationOffset != BarIndex)
          ) {
        //
        // Skip updating when AddrTranslationOffset is not MAX_UINT64 or MAX_UINT8 (wide match).
        // Skip updating when current BarIndex doesn't equal to AddrTranslationOffset.
        // Comparing against MAX_UINT8 is to keep backward compatibility.
        //
        continue;
      }

      SetFlag = FALSE;
      switch (Ptr->ResType) {
      case ACPI_ADDRESS_SPACE_TYPE_MEM:

        //
        // Make sure the bar is memory type
        //
        if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeMem)) {
          SetFlag = TRUE;

          //
          // Ignored if granularity is 0.
          // Ignored if PCI BAR is I/O or 32-bit memory.
          // If PCI BAR is 64-bit memory and granularity is 32, then
          // the PCI BAR resource is allocated below 4GB.
          // If PCI BAR is 64-bit memory and granularity is 64, then
          // the PCI BAR resource is allocated above 4GB.
          //
          if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeMem64) {
            switch (Ptr->AddrSpaceGranularity) {
            case 32:
              PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32;
            case 64:
              PciIoDevice->PciBar[BarIndex].BarTypeFixed = TRUE;
              break;
            default:
              break;
            }
          }

          if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypePMem64) {
            switch (Ptr->AddrSpaceGranularity) {
            case 32:
              PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32;
            case 64:
              PciIoDevice->PciBar[BarIndex].BarTypeFixed = TRUE;
              break;
            default:
              break;
            }
          }
        }
        break;

      case ACPI_ADDRESS_SPACE_TYPE_IO:

        //
        // Make sure the bar is IO type
        //
        if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeIo)) {
          SetFlag = TRUE;
        }
        break;
      }

      if (SetFlag) {

        //
        // Update the new alignment for the device
        //
        SetNewAlign (&(PciIoDevice->PciBar[BarIndex].Alignment), Ptr->AddrRangeMax);

        //
        // Update the new length for the device
        //
        if (Ptr->AddrLen != 0) {
          PciIoDevice->PciBar[BarIndex].Length = Ptr->AddrLen;
        }
      }
    }

    Ptr++;
  }

  FreePool (Configuration);

  return EFI_SUCCESS;
}

/**
  This routine will update the alignment with the new alignment.
  Compare with OLD_ALIGN/EVEN_ALIGN/SQUAD_ALIGN/DQUAD_ALIGN is to keep
  backward compatibility.

  @param Alignment    Input Old alignment. Output updated alignment.
  @param NewAlignment New alignment.

**/
VOID
SetNewAlign (
  IN OUT UINT64     *Alignment,
  IN     UINT64     NewAlignment
  )
{
  UINT64  OldAlignment;
  UINTN   ShiftBit;

  //
  // The new alignment is the same as the original,
  // so skip it
  //
  if ((NewAlignment == 0) || (NewAlignment == OLD_ALIGN)) {
    return ;
  }
  //
  // Check the validity of the parameter
  //
   if (NewAlignment != EVEN_ALIGN  &&
       NewAlignment != SQUAD_ALIGN &&
       NewAlignment != DQUAD_ALIGN ) {
    *Alignment = NewAlignment;
    return ;
  }

  OldAlignment  = (*Alignment) + 1;
  ShiftBit      = 0;

  //
  // Get the first non-zero hex value of the length
  //
  while ((OldAlignment & 0x0F) == 0x00) {
    OldAlignment = RShiftU64 (OldAlignment, 4);
    ShiftBit += 4;
  }

  //
  // Adjust the alignment to even, quad or double quad boundary
  //
  if (NewAlignment == EVEN_ALIGN) {
    if ((OldAlignment & 0x01) != 0) {
      OldAlignment = OldAlignment + 2 - (OldAlignment & 0x01);
    }
  } else if (NewAlignment == SQUAD_ALIGN) {
    if ((OldAlignment & 0x03) != 0) {
      OldAlignment = OldAlignment + 4 - (OldAlignment & 0x03);
    }
  } else if (NewAlignment == DQUAD_ALIGN) {
    if ((OldAlignment & 0x07) != 0) {
      OldAlignment = OldAlignment + 8 - (OldAlignment & 0x07);
    }
  }

  //
  // Update the old value
  //
  NewAlignment  = LShiftU64 (OldAlignment, ShiftBit) - 1;
  *Alignment    = NewAlignment;

  return ;
}

/**
  Parse PCI IOV VF bar information and fill them into PCI device instance.

  @param PciIoDevice  Pci device instance.
  @param Offset       Bar offset.
  @param BarIndex     Bar index.

  @return Next bar offset.

**/
UINTN
PciIovParseVfBar (
  IN PCI_IO_DEVICE  *PciIoDevice,
  IN UINTN          Offset,
  IN UINTN          BarIndex
  )
{
  UINT32      Value;
  UINT32      OriginalValue;
  UINT32      Mask;
  EFI_STATUS  Status;

  //
  // Ensure it is called properly
  //
  ASSERT (PciIoDevice->SrIovCapabilityOffset != 0);
  if (PciIoDevice->SrIovCapabilityOffset == 0) {
    return 0;
  }

  OriginalValue = 0;
  Value         = 0;

  Status = VfBarExisted (
            PciIoDevice,
            Offset,
            &Value,
            &OriginalValue
            );

  if (EFI_ERROR (Status)) {
    PciIoDevice->VfPciBar[BarIndex].BaseAddress = 0;
    PciIoDevice->VfPciBar[BarIndex].Length      = 0;
    PciIoDevice->VfPciBar[BarIndex].Alignment   = 0;

    //
    // Scan all the BARs anyway
    //
    PciIoDevice->VfPciBar[BarIndex].Offset = (UINT16) Offset;
    return Offset + 4;
  }

  PciIoDevice->VfPciBar[BarIndex].Offset = (UINT16) Offset;
  if ((Value & 0x01) != 0) {
    //
    // Device I/Os. Impossible
    //
    ASSERT (FALSE);
    return Offset + 4;

  } else {

    Mask  = 0xfffffff0;

    PciIoDevice->VfPciBar[BarIndex].BaseAddress = OriginalValue & Mask;

    switch (Value & 0x07) {

    //
    //memory space; anywhere in 32 bit address space
    //
    case 0x00:
      if ((Value & 0x08) != 0) {
        PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypePMem32;
      } else {
        PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeMem32;
      }

      PciIoDevice->VfPciBar[BarIndex].Length    = (~(Value & Mask)) + 1;
      PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;

      //
      // Adjust Length
      //
      PciIoDevice->VfPciBar[BarIndex].Length = MultU64x32 (PciIoDevice->VfPciBar[BarIndex].Length, PciIoDevice->InitialVFs);
      //
      // Adjust Alignment
      //
      if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {
        PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;
      }

      break;

    //
    // memory space; anywhere in 64 bit address space
    //
    case 0x04:
      if ((Value & 0x08) != 0) {
        PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypePMem64;
      } else {
        PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeMem64;
      }

      //
      // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar
      // is regarded as an extension for the first bar. As a result
      // the sizing will be conducted on combined 64 bit value
      // Here just store the masked first 32bit value for future size
      // calculation
      //
      PciIoDevice->VfPciBar[BarIndex].Length    = Value & Mask;
      PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;

      if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {
        PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;
      }

      //
      // Increment the offset to point to next DWORD
      //
      Offset += 4;

      Status = VfBarExisted (
                PciIoDevice,
                Offset,
                &Value,
                &OriginalValue
                );

      if (EFI_ERROR (Status)) {
        return Offset + 4;
      }

      //
      // Fix the length to support some special 64 bit BAR
      //
      Value |= ((UINT32) -1 << HighBitSet32 (Value));

      //
      // Calculate the size of 64bit bar
      //
      PciIoDevice->VfPciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32);

      PciIoDevice->VfPciBar[BarIndex].Length    = PciIoDevice->VfPciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32);
      PciIoDevice->VfPciBar[BarIndex].Length    = (~(PciIoDevice->VfPciBar[BarIndex].Length)) + 1;
      PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;

      //
      // Adjust Length
      //
      PciIoDevice->VfPciBar[BarIndex].Length = MultU64x32 (PciIoDevice->VfPciBar[BarIndex].Length, PciIoDevice->InitialVFs);
      //
      // Adjust Alignment
      //
      if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {
        PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;
      }

      break;

    //
    // reserved
    //
    default:
      PciIoDevice->VfPciBar[BarIndex].BarType   = PciBarTypeUnknown;
      PciIoDevice->VfPciBar[BarIndex].Length    = (~(Value & Mask)) + 1;
      PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;

      if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {
        PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;
      }

      break;
    }
  }

  //
  // Check the length again so as to keep compatible with some special bars
  //
  if (PciIoDevice->VfPciBar[BarIndex].Length == 0) {
    PciIoDevice->VfPciBar[BarIndex].BarType     = PciBarTypeUnknown;
    PciIoDevice->VfPciBar[BarIndex].BaseAddress = 0;
    PciIoDevice->VfPciBar[BarIndex].Alignment   = 0;
  }

  //
  // Increment number of bar
  //
  return Offset + 4;
}

/**
  Parse PCI bar information and fill them into PCI device instance.

  @param PciIoDevice  Pci device instance.
  @param Offset       Bar offset.
  @param BarIndex     Bar index.

  @return Next bar offset.

**/
UINTN
PciParseBar (
  IN PCI_IO_DEVICE  *PciIoDevice,
  IN UINTN          Offset,
  IN UINTN          BarIndex
  )
{
  UINT32      Value;
  UINT32      OriginalValue;
  UINT32      Mask;
  EFI_STATUS  Status;

  OriginalValue = 0;
  Value         = 0;

  Status = BarExisted (
             PciIoDevice,
             Offset,
             &Value,
             &OriginalValue
             );

  if (EFI_ERROR (Status)) {
    PciIoDevice->PciBar[BarIndex].BaseAddress = 0;
    PciIoDevice->PciBar[BarIndex].Length      = 0;
    PciIoDevice->PciBar[BarIndex].Alignment   = 0;

    //
    // Some devices don't fully comply to PCI spec 2.2. So be to scan all the BARs anyway
    //
    PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;
    return Offset + 4;
  }

  PciIoDevice->PciBar[BarIndex].BarTypeFixed = FALSE;
  PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;
  if ((Value & 0x01) != 0) {
    //
    // Device I/Os
    //
    Mask = 0xfffffffc;

    if ((Value & 0xFFFF0000) != 0) {
      //
      // It is a IO32 bar
      //
      PciIoDevice->PciBar[BarIndex].BarType   = PciBarTypeIo32;
      PciIoDevice->PciBar[BarIndex].Length    = ((~(Value & Mask)) + 1);
      PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;

    } else {
      //
      // It is a IO16 bar
      //
      PciIoDevice->PciBar[BarIndex].BarType   = PciBarTypeIo16;
      PciIoDevice->PciBar[BarIndex].Length    = 0x0000FFFF & ((~(Value & Mask)) + 1);
      PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;

    }
    //
    // Workaround. Some platforms implement IO bar with 0 length
    // Need to treat it as no-bar
    //
    if (PciIoDevice->PciBar[BarIndex].Length == 0) {
      PciIoDevice->PciBar[BarIndex].BarType = (PCI_BAR_TYPE) 0;
    }

    PciIoDevice->PciBar[BarIndex].BaseAddress   = OriginalValue & Mask;

  } else {

    Mask  = 0xfffffff0;

    PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask;

    switch (Value & 0x07) {

    //
    //memory space; anywhere in 32 bit address space
    //
    case 0x00:
      if ((Value & 0x08) != 0) {
        PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32;
      } else {
        PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32;
      }

      PciIoDevice->PciBar[BarIndex].Length    = (~(Value & Mask)) + 1;
      if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {
        //
        // Force minimum 4KByte alignment for Virtualization technology for Directed I/O
        //
        PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);
      } else {
        PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
      }
      break;

    //
    // memory space; anywhere in 64 bit address space
    //
    case 0x04:
      if ((Value & 0x08) != 0) {
        PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem64;
      } else {
        PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem64;
      }

      //
      // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar
      // is regarded as an extension for the first bar. As a result
      // the sizing will be conducted on combined 64 bit value
      // Here just store the masked first 32bit value for future size
      // calculation
      //
      PciIoDevice->PciBar[BarIndex].Length    = Value & Mask;
      PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;

      //
      // Increment the offset to point to next DWORD
      //
      Offset += 4;

      Status = BarExisted (
                 PciIoDevice,
                 Offset,
                 &Value,
                 &OriginalValue
                 );

      if (EFI_ERROR (Status)) {
        //
        // the high 32 bit does not claim any BAR, we need to re-check the low 32 bit BAR again
        //
        if (PciIoDevice->PciBar[BarIndex].Length == 0) {
          //
          // some device implement MMIO bar with 0 length, need to treat it as no-bar
          //
          PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;
          return Offset + 4;
        }
      }

      //
      // Fix the length to support some special 64 bit BAR
      //
      if (Value == 0) {
        DEBUG ((EFI_D_INFO, "[PciBus]BAR probing for upper 32bit of MEM64 BAR returns 0, change to 0xFFFFFFFF.\n"));
        Value = (UINT32) -1;
      } else {
        Value |= ((UINT32)(-1) << HighBitSet32 (Value));
      }

      //
      // Calculate the size of 64bit bar
      //
      PciIoDevice->PciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32);

      PciIoDevice->PciBar[BarIndex].Length    = PciIoDevice->PciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32);
      PciIoDevice->PciBar[BarIndex].Length    = (~(PciIoDevice->PciBar[BarIndex].Length)) + 1;
      if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {
        //
        // Force minimum 4KByte alignment for Virtualization technology for Directed I/O
        //
        PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);
      } else {
        PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
      }

      break;

    //
    // reserved
    //
    default:
      PciIoDevice->PciBar[BarIndex].BarType   = PciBarTypeUnknown;
      PciIoDevice->PciBar[BarIndex].Length    = (~(Value & Mask)) + 1;
      if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {
        //
        // Force minimum 4KByte alignment for Virtualization technology for Directed I/O
        //
        PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);
      } else {
        PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
      }
      break;
    }
  }

  //
  // Check the length again so as to keep compatible with some special bars
  //
  if (PciIoDevice->PciBar[BarIndex].Length == 0) {
    PciIoDevice->PciBar[BarIndex].BarType     = PciBarTypeUnknown;
    PciIoDevice->PciBar[BarIndex].BaseAddress = 0;
    PciIoDevice->PciBar[BarIndex].Alignment   = 0;
  }

  //
  // Increment number of bar
  //
  return Offset + 4;
}

/**
  This routine is used to initialize the bar of a PCI device.

  @param PciIoDevice Pci device instance.

  @note It can be called typically when a device is going to be rejected.

**/
VOID
InitializePciDevice (
  IN PCI_IO_DEVICE    *PciIoDevice
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT8               Offset;

  PciIo = &(PciIoDevice->PciIo);

  //
  // Put all the resource apertures
  // Resource base is set to all ones so as to indicate its resource
  // has not been allocated
  //
  for (Offset = 0x10; Offset <= 0x24; Offset += sizeof (UINT32)) {
    PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, Offset, 1, &gAllOne);
  }
}

/**
  This routine is used to initialize the bar of a PCI-PCI Bridge device.

  @param  PciIoDevice PCI-PCI bridge device instance.

**/
VOID
InitializePpb (
  IN PCI_IO_DEVICE    *PciIoDevice
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;

  PciIo = &(PciIoDevice->PciIo);

  //
  // Put all the resource apertures including IO16
  // Io32, pMem32, pMem64 to quiescent state
  // Resource base all ones, Resource limit all zeros
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1D, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x20, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x22, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x24, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x26, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2C, 1, &gAllZero);

  //
  // Don't support use io32 as for now
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x30, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x32, 1, &gAllZero);

  //
  // Force Interrupt line to zero for cards that come up randomly
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero);
}

/**
  This routine is used to initialize the bar of a PCI Card Bridge device.

  @param PciIoDevice  PCI Card bridge device.

**/
VOID
InitializeP2C (
  IN PCI_IO_DEVICE    *PciIoDevice
  )
{
  EFI_PCI_IO_PROTOCOL *PciIo;

  PciIo = &(PciIoDevice->PciIo);

  //
  // Put all the resource apertures including IO16
  // Io32, pMem32, pMem64 to quiescent state(
  // Resource base all ones, Resource limit all zeros
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x1c, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x20, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x24, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2c, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x30, 1, &gAllZero);

  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x34, 1, &gAllOne);
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x38, 1, &gAllZero);

  //
  // Force Interrupt line to zero for cards that come up randomly
  //
  PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero);
}

/**
  Create and initialize general PCI I/O device instance for
  PCI device/bridge device/hotplug bridge device.

  @param Bridge            Parent bridge instance.
  @param Pci               Input Pci information block.
  @param Bus               Device Bus NO.
  @param Device            Device device NO.
  @param Func              Device func NO.

  @return Instance of PCI device. NULL means no instance created.

**/
PCI_IO_DEVICE *
CreatePciIoDevice (
  IN PCI_IO_DEVICE                    *Bridge,
  IN PCI_TYPE00                       *Pci,
  IN UINT8                            Bus,
  IN UINT8                            Device,
  IN UINT8                            Func
  )
{
  PCI_IO_DEVICE        *PciIoDevice;
  EFI_PCI_IO_PROTOCOL  *PciIo;
  EFI_STATUS           Status;

  PciIoDevice = AllocateZeroPool (sizeof (PCI_IO_DEVICE));
  if (PciIoDevice == NULL) {
    return NULL;
  }

  PciIoDevice->Signature        = PCI_IO_DEVICE_SIGNATURE;
  PciIoDevice->Handle           = NULL;
  PciIoDevice->PciRootBridgeIo  = Bridge->PciRootBridgeIo;
  PciIoDevice->DevicePath       = NULL;
  PciIoDevice->BusNumber        = Bus;
  PciIoDevice->DeviceNumber     = Device;
  PciIoDevice->FunctionNumber   = Func;
  PciIoDevice->Decodes          = 0;

  if (gFullEnumeration) {
    PciIoDevice->Allocated = FALSE;
  } else {
    PciIoDevice->Allocated = TRUE;
  }

  PciIoDevice->Registered         = FALSE;
  PciIoDevice->Attributes         = 0;
  PciIoDevice->Supports           = 0;
  PciIoDevice->BusOverride        = FALSE;
  PciIoDevice->AllOpRomProcessed  = FALSE;

  PciIoDevice->IsPciExp           = FALSE;

  CopyMem (&(PciIoDevice->Pci), Pci, sizeof (PCI_TYPE01));

  //
  // Initialize the PCI I/O instance structure
  //
  InitializePciIoInstance (PciIoDevice);
  InitializePciDriverOverrideInstance (PciIoDevice);
  InitializePciLoadFile2 (PciIoDevice);
  PciIo = &PciIoDevice->PciIo;

  //
  // Create a device path for this PCI device and store it into its private data
  //
  CreatePciDevicePath (
    Bridge->DevicePath,
    PciIoDevice
    );

  //
  // Detect if PCI Express Device
  //
  PciIoDevice->PciExpressCapabilityOffset = 0;
  Status = LocateCapabilityRegBlock (
             PciIoDevice,
             EFI_PCI_CAPABILITY_ID_PCIEXP,
             &PciIoDevice->PciExpressCapabilityOffset,
             NULL
             );
  if (!EFI_ERROR (Status)) {
    PciIoDevice->IsPciExp = TRUE;
  }

  if (PcdGetBool (PcdAriSupport)) {
    //
    // Check if the device is an ARI device.
    //
    Status = LocatePciExpressCapabilityRegBlock (
               PciIoDevice,
               EFI_PCIE_CAPABILITY_ID_ARI,
               &PciIoDevice->AriCapabilityOffset,
               NULL
               );
    if (!EFI_ERROR (Status)) {
      //
      // We need to enable ARI feature before calculate BusReservation,
      // because FirstVFOffset and VFStride may change after that.
      //
      EFI_PCI_IO_PROTOCOL  *ParentPciIo;
      UINT32               Data32;

      //
      // Check if its parent supports ARI forwarding.
      //
      ParentPciIo = &Bridge->PciIo;
      ParentPciIo->Pci.Read (
                          ParentPciIo,
                          EfiPciIoWidthUint32,
                          Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_OFFSET,
                          1,
                          &Data32
                          );
      if ((Data32 & EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING) != 0) {
        //
        // ARI forward support in bridge, so enable it.
        //
        ParentPciIo->Pci.Read (
                            ParentPciIo,
                            EfiPciIoWidthUint32,
                            Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET,
                            1,
                            &Data32
                            );
        if ((Data32 & EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_ARI_FORWARDING) == 0) {
          Data32 |= EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_ARI_FORWARDING;
          ParentPciIo->Pci.Write (
                              ParentPciIo,
                              EfiPciIoWidthUint32,
                              Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET,
                              1,
                              &Data32
                              );
          DEBUG ((
            EFI_D_INFO,
            " ARI: forwarding enabled for PPB[%02x:%02x:%02x]\n",
            Bridge->BusNumber,
            Bridge->DeviceNumber,
            Bridge->FunctionNumber
            ));
        }
      }

      DEBUG ((EFI_D_INFO, " ARI: CapOffset = 0x%x\n", PciIoDevice->AriCapabilityOffset));
    }
  }

  //
  // Initialization for SR-IOV
  //

  if (PcdGetBool (PcdSrIovSupport)) {
    Status = LocatePciExpressCapabilityRegBlock (
               PciIoDevice,
               EFI_PCIE_CAPABILITY_ID_SRIOV,
               &PciIoDevice->SrIovCapabilityOffset,
               NULL
               );
    if (!EFI_ERROR (Status)) {
      UINT32    SupportedPageSize;
      UINT16    VFStride;
      UINT16    FirstVFOffset;
      UINT16    Data16;
      UINT32    PFRid;
      UINT32    LastVF;

      //
      // If the SR-IOV device is an ARI device, then Set ARI Capable Hierarchy for the device.
      //
      if (PcdGetBool (PcdAriSupport) && PciIoDevice->AriCapabilityOffset != 0) {
        PciIo->Pci.Read (
                     PciIo,
                     EfiPciIoWidthUint16,
                     PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL,
                     1,
                     &Data16
                     );
        Data16 |= EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL_ARI_HIERARCHY;
        PciIo->Pci.Write (
                     PciIo,
                     EfiPciIoWidthUint16,
                     PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL,
                     1,
                     &Data16
                     );
      }

      //
      // Calculate SystemPageSize
      //

      PciIo->Pci.Read (
                   PciIo,
                   EfiPciIoWidthUint32,
                   PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_SUPPORTED_PAGE_SIZE,
                   1,
                   &SupportedPageSize
                   );
      PciIoDevice->SystemPageSize = (PcdGet32 (PcdSrIovSystemPageSize) & SupportedPageSize);
      ASSERT (PciIoDevice->SystemPageSize != 0);

      PciIo->Pci.Write (
                   PciIo,
                   EfiPciIoWidthUint32,
                   PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_SYSTEM_PAGE_SIZE,
                   1,
                   &PciIoDevice->SystemPageSize
                   );
      //
      // Adjust SystemPageSize for Alignment usage later
      //
      PciIoDevice->SystemPageSize <<= 12;

      //
      // Calculate BusReservation for PCI IOV
      //

      //
      // Read First FirstVFOffset, InitialVFs, and VFStride
      //
      PciIo->Pci.Read (
                   PciIo,
                   EfiPciIoWidthUint16,
                   PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_FIRSTVF,
                   1,
                   &FirstVFOffset
                   );
      PciIo->Pci.Read (
                   PciIo,
                   EfiPciIoWidthUint16,
                   PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_INITIALVFS,
                   1,
                   &PciIoDevice->InitialVFs
                   );
      PciIo->Pci.Read (
                   PciIo,
                   EfiPciIoWidthUint16,
                   PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_VFSTRIDE,
                   1,
                   &VFStride
                   );
      //
      // Calculate LastVF
      //
      PFRid = EFI_PCI_RID(Bus, Device, Func);
      LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;

      //
      // Calculate ReservedBusNum for this PF
      //
      PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);

      DEBUG ((
        EFI_D_INFO,
        " SR-IOV: SupportedPageSize = 0x%x; SystemPageSize = 0x%x; FirstVFOffset = 0x%x;\n",
        SupportedPageSize, PciIoDevice->SystemPageSize >> 12, FirstVFOffset
        ));
      DEBUG ((
        EFI_D_INFO,
        "         InitialVFs = 0x%x; ReservedBusNum = 0x%x; CapOffset = 0x%x\n",
        PciIoDevice->InitialVFs, PciIoDevice->ReservedBusNum, PciIoDevice->SrIovCapabilityOffset
        ));
    }
  }

  if (PcdGetBool (PcdMrIovSupport)) {
    Status = LocatePciExpressCapabilityRegBlock (
               PciIoDevice,
               EFI_PCIE_CAPABILITY_ID_MRIOV,
               &PciIoDevice->MrIovCapabilityOffset,
               NULL
               );
    if (!EFI_ERROR (Status)) {
      DEBUG ((EFI_D_INFO, " MR-IOV: CapOffset = 0x%x\n", PciIoDevice->MrIovCapabilityOffset));
    }
  }

  //
  // Initialize the reserved resource list
  //
  InitializeListHead (&PciIoDevice->ReservedResourceList);

  //
  // Initialize the driver list
  //
  InitializeListHead (&PciIoDevice->OptionRomDriverList);

  //
  // Initialize the child list
  //
  InitializeListHead (&PciIoDevice->ChildList);

  return PciIoDevice;
}

/**
  This routine is used to enumerate entire pci bus system
  in a given platform.

  It is only called on the second start on the same Root Bridge.

  @param  Controller     Parent bridge handler.

  @retval EFI_SUCCESS    PCI enumeration finished successfully.
  @retval other          Some error occurred when enumerating the pci bus system.

**/
EFI_STATUS
PciEnumeratorLight (
  IN EFI_HANDLE                    Controller
  )
{

  EFI_STATUS                        Status;
  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL   *PciRootBridgeIo;
  PCI_IO_DEVICE                     *RootBridgeDev;
  UINT16                            MinBus;
  UINT16                            MaxBus;
  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptors;

  MinBus      = 0;
  MaxBus      = PCI_MAX_BUS;
  Descriptors = NULL;

  //
  // If this root bridge has been already enumerated, then return successfully
  //
  if (GetRootBridgeByHandle (Controller) != NULL) {
    return EFI_SUCCESS;
  }

  //
  // Open pci root bridge io protocol
  //
  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiPciRootBridgeIoProtocolGuid,
                  (VOID **) &PciRootBridgeIo,
                  gPciBusDriverBinding.DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
    return Status;
  }

  Status = PciRootBridgeIo->Configuration (PciRootBridgeIo, (VOID **) &Descriptors);

  if (EFI_ERROR (Status)) {
    return Status;
  }

  while (PciGetBusRange (&Descriptors, &MinBus, &MaxBus, NULL) == EFI_SUCCESS) {

    //
    // Create a device node for root bridge device with a NULL host bridge controller handle
    //
    RootBridgeDev = CreateRootBridge (Controller);

    if (RootBridgeDev == NULL) {
      Descriptors++;
      continue;
    }

    //
    // Record the root bridge-io protocol
    //
    RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo;

    Status = PciPciDeviceInfoCollector (
               RootBridgeDev,
               (UINT8) MinBus
               );

    if (!EFI_ERROR (Status)) {

      //
      // Remove those PCI devices which are rejected when full enumeration
      //
      RemoveRejectedPciDevices (RootBridgeDev->Handle, RootBridgeDev);

      //
      // Process option rom light
      //
      ProcessOptionRomLight (RootBridgeDev);

      //
      // Determine attributes for all devices under this root bridge
      //
      DetermineDeviceAttribute (RootBridgeDev);

      //
      // If successfully, insert the node into device pool
      //
      InsertRootBridge (RootBridgeDev);
    } else {

      //
      // If unsuccessfully, destroy the entire node
      //
      DestroyRootBridge (RootBridgeDev);
    }

    Descriptors++;
  }

  return EFI_SUCCESS;
}

/**
  Get bus range from PCI resource descriptor list.

  @param Descriptors  A pointer to the address space descriptor.
  @param MinBus       The min bus returned.
  @param MaxBus       The max bus returned.
  @param BusRange     The bus range returned.

  @retval EFI_SUCCESS    Successfully got bus range.
  @retval EFI_NOT_FOUND  Can not find the specific bus.

**/
EFI_STATUS
PciGetBusRange (
  IN     EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR  **Descriptors,
  OUT    UINT16                             *MinBus,
  OUT    UINT16                             *MaxBus,
  OUT    UINT16                             *BusRange
  )
{
  while ((*Descriptors)->Desc != ACPI_END_TAG_DESCRIPTOR) {
    if ((*Descriptors)->ResType == ACPI_ADDRESS_SPACE_TYPE_BUS) {
      if (MinBus != NULL) {
        *MinBus = (UINT16) (*Descriptors)->AddrRangeMin;
      }

      if (MaxBus != NULL) {
        *MaxBus = (UINT16) (*Descriptors)->AddrRangeMax;
      }

      if (BusRange != NULL) {
        *BusRange = (UINT16) (*Descriptors)->AddrLen;
      }

      return EFI_SUCCESS;
    }

    (*Descriptors)++;
  }

  return EFI_NOT_FOUND;
}

/**
  This routine can be used to start the root bridge.

  @param RootBridgeDev     Pci device instance.

  @retval EFI_SUCCESS      This device started.
  @retval other            Failed to get PCI Root Bridge I/O protocol.

**/
EFI_STATUS
StartManagingRootBridge (
  IN PCI_IO_DEVICE *RootBridgeDev
  )
{
  EFI_HANDLE                      RootBridgeHandle;
  EFI_STATUS                      Status;
  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;

  //
  // Get the root bridge handle
  //
  RootBridgeHandle = RootBridgeDev->Handle;
  PciRootBridgeIo  = NULL;

  //
  // Get the pci root bridge io protocol
  //
  Status = gBS->OpenProtocol (
                  RootBridgeHandle,
                  &gEfiPciRootBridgeIoProtocolGuid,
                  (VOID **) &PciRootBridgeIo,
                  gPciBusDriverBinding.DriverBindingHandle,
                  RootBridgeHandle,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );

  if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
    return Status;
  }

  //
  // Store the PciRootBridgeIo protocol into root bridge private data
  //
  RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo;

  return EFI_SUCCESS;

}

/**
  This routine can be used to check whether a PCI device should be rejected when light enumeration.

  @param PciIoDevice  Pci device instance.

  @retval TRUE      This device should be rejected.
  @retval FALSE     This device shouldn't be rejected.

**/
BOOLEAN
IsPciDeviceRejected (
  IN PCI_IO_DEVICE *PciIoDevice
  )
{
  EFI_STATUS  Status;
  UINT32      TestValue;
  UINT32      OldValue;
  UINT32      Mask;
  UINT8       BarOffset;

  //
  // PPB should be skip!
  //
  if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
    return FALSE;
  }

  if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {
    //
    // Only test base registers for P2C
    //
    for (BarOffset = 0x1C; BarOffset <= 0x38; BarOffset += 2 * sizeof (UINT32)) {

      Mask    = (BarOffset < 0x2C) ? 0xFFFFF000 : 0xFFFFFFFC;
      Status  = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);
      if (EFI_ERROR (Status)) {
        continue;
      }

      TestValue = TestValue & Mask;
      if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {
        //
        // The bar isn't programed, so it should be rejected
        //
        return TRUE;
      }
    }

    return FALSE;
  }

  for (BarOffset = 0x14; BarOffset <= 0x24; BarOffset += sizeof (UINT32)) {
    //
    // Test PCI devices
    //
    Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);
    if (EFI_ERROR (Status)) {
      continue;
    }

    if ((TestValue & 0x01) != 0) {

      //
      // IO Bar
      //
      Mask      = 0xFFFFFFFC;
      TestValue = TestValue & Mask;
      if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {
        return TRUE;
      }

    } else {

      //
      // Mem Bar
      //
      Mask      = 0xFFFFFFF0;
      TestValue = TestValue & Mask;

      if ((TestValue & 0x07) == 0x04) {

        //
        // Mem64 or PMem64
        //
        BarOffset += sizeof (UINT32);
        if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {

          //
          // Test its high 32-Bit BAR
          //
          Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);
          if (TestValue == OldValue) {
            return TRUE;
          }
        }

      } else {

        //
        // Mem32 or PMem32
        //
        if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {
          return TRUE;
        }
      }
    }
  }

  return FALSE;
}

/**
  Reset all bus number from specific bridge.

  @param Bridge           Parent specific bridge.
  @param StartBusNumber   Start bus number.

**/
VOID
ResetAllPpbBusNumber (
  IN PCI_IO_DEVICE                      *Bridge,
  IN UINT8                              StartBusNumber
  )
{
  EFI_STATUS                      Status;
  PCI_TYPE00                      Pci;
  UINT8                           Device;
  UINT32                          Register;
  UINT8                           Func;
  UINT64                          Address;
  UINT8                           SecondaryBus;
  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;

  PciRootBridgeIo = Bridge->PciRootBridgeIo;

  for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {
    for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {

      //
      // Check to see whether a pci device is present
      //
      Status = PciDevicePresent (
                 PciRootBridgeIo,
                 &Pci,
                 StartBusNumber,
                 Device,
                 Func
                 );

      if (EFI_ERROR (Status) && Func == 0) {
        //
        // go to next device if there is no Function 0
        //
        break;
      }

      if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci))) {

        Register  = 0;
        Address   = EFI_PCI_ADDRESS (StartBusNumber, Device, Func, 0x18);
        Status    = PciRootBridgeIo->Pci.Read (
                                           PciRootBridgeIo,
                                           EfiPciWidthUint32,
                                           Address,
                                           1,
                                           &Register
                                           );
        SecondaryBus = (UINT8)(Register >> 8);

        if (SecondaryBus != 0) {
          ResetAllPpbBusNumber (Bridge, SecondaryBus);
        }

        //
        // Reset register 18h, 19h, 1Ah on PCI Bridge
        //
        Register &= 0xFF000000;
        Status = PciRootBridgeIo->Pci.Write (
                                        PciRootBridgeIo,
                                        EfiPciWidthUint32,
                                        Address,
                                        1,
                                        &Register
                                        );
      }

      if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {
        //
        // Skip sub functions, this is not a multi function device
        //
        Func = PCI_MAX_FUNC;
      }
    }
  }
}