#
#  Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
#  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
#  This program and the accompanying materials
#  are licensed and made available under the terms and conditions of the BSD License
#  which accompanies this distribution.  The full text of the license may be found at
#  http://opensource.org/licenses/bsd-license.php

#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#

## Syntax
#
# "*" is used to indicate that the source files will be processed at the same time.
# "?" is used to indicate that the source files will be processed one by one.
#
# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
#   <InputFile[.<ToolChainFamily>]> <EOL>
#       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
#
#   <OutputFile[.<ToolChainFamily>]> <EOL>
#       <FileFullPath>
#
#   <ExtraDependency>
#       <FileFullPath>
#
#   <Command[.<ToolChainFamily>]> <EOL>
#       <Command1>
#       [<Command2>]
#
# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
# Missing <InputFile> will cause an exception and break build.
# Missing <Command> will cause that related build target won't be generated but
#   won't break build.
#

## Placeholders for string substitution
#
#   ${src}      Source file(s) to be built (full path)
#   ${s_path}   Source file directory (absolute path)
#   ${s_dir}    Source file relative directory within a module
#               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
#   ${s_name}   Source file name without path
#   ${s_base}   Source file name without extension and path
#   ${s_ext}    Source file extension
#
#   ${dst}      Destination file(s) built from ${src} (full path)
#   ${d_path}   Destination file directory (absolute path)
#   ${d_name}   Destination file name without path
#   ${d_base}   Destination file name without extension and path
#   ${d_ext}    Destination file extension
#
#   (+)         Directory separator
#

## Macro
#   $(WORKSPACE)        Workspace directory
#   $(OUTPUT_DIR)       Directory for intermediate files for building a module
#   $(DEBUG_DIR)        Directory for files used to debug a module
#   $(BUILD_DIR)        All files for building a platform will be put in this directory
#   $(BIN_DIR)          Common directory for executable files
#   $(FV_DIR)           Directory to store flash image files
#   $(INC)              Search path of current module
#   $(NASM_INC)         Search nasm file path of current module
#   $(INC_LIST)         A file containing search paths of current module
#   $(LIBS)             Static library files of current module
#   $(<tool>_FLAGS)     Tools flags of current module
#   $(MODULE_NAME)      Current module name
#   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
#                       in different modules, otherwise its value is same as $(MODULE_NAME)
#   $(MODULE_TYPE)      Current module type
#   $(MODULE_GUID)      Current module guid
#   $(ARCH)             Architecture of current module
#   $(TOOLCHAIN)        Toolchain used to build current module
#   $(TARGET)           Target of current module (DEBUG/RELEASE)
#   $(<tool>)           Path of tool
#   $(EDK_TOOLS_PATH)   Path of build tools
#   $(<FILE_TYPES>)     File list of each file type
#                       (Note: The macro name is derived from file type name. For example,
#                        C-Code-File will have C_CODE_FILES macro.)
#   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
#                       (
#                        Note: The macro and file name are derived from file type name.
#                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
#                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
#                        will be generated only when this macro is used in command line.
#                        This is intended to get over the long command line limitation.
#                       )
#
#   $(CP)     copy command
#   $(MV)     move command
#   $(RM)     delete command
#   $(MD)     create dir command
#   $(RD)     remove dir command
#

## Reserved File-Type
#
# Don't change following names of file types and their associated files,
# which are also used in tools' code
#
#   C-Code-File
#   C-Header-File
#   Dynamic-Library-File
#   Static-Library-File
#   Visual-Form-Representation-File
#   Unicode-Text-File
#

## Build Rule Version Number
#  build_rule_version=0.1
#

[C-Code-File]
    <InputFile>
        ?.c
        ?.C
        ?.cc
        ?.CC
        ?.cpp
        ?.Cpp
        ?.CPP

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj

    <Command.MSFT, Command.INTEL>
        "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}

    <Command.GCC, Command.RVCT>
        # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
        @"$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
        @"echo" [CC] ${s_base}

    <Command.XCODE>
        @"$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
        @"echo" [CC] ${s_base}

[C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64,C-Code-File.BASE.ARM,C-Code-File.SEC.ARM,C-Code-File.PEI_CORE.ARM,C-Code-File.PEIM.ARM]
    <InputFile>
        ?.c

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj

    <Command.GCC, Command.RVCT>
        "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -c -o ${dst} $(INC) ${src}

[C-Header-File]
    <InputFile>
        *.h, *.H

    <OutputFile>

    <Command>

[Assembly-Code-File.COMMON.COMMON]
    <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
        ?.asm, ?.Asm, ?.ASM

    <InputFile.GCC>
        ?.S, ?.s

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj

    <Command.MSFT, Command.INTEL>
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii

    <Command.GCC, Command.RVCT>
        @"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        @Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        #--trim-long
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
        @"$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
        @"echo" [ASM] ${s_base}

[Assembly-Code-File.COMMON.ARM,Assembly-Code-File.COMMON.AARCH64]
    # Remove --convert-hex for ARM as it breaks MSFT assemblers
    <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
        ?.asm, ?.Asm, ?.ASM

    <InputFile.GCC>
        ?.S, ?.s

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj

    <Command.INTEL>
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii

    <Command.MSFT>
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        Trim --source-code --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii

    <Command.GCC, Command.RVCT>
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
        "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii

[Nasm-Assembly-Code-File.COMMON.COMMON]
    <InputFile>
        ?.nasm, ?.Nasm, ?.NASM

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj

    <Command>
        @"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        @Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        @"$(NASM)" -I${s_path}(+) $(NASM_INC) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
        @"echo" [NASM] ${s_base}

[Device-Tree-Source-File]
    <InputFile>
        ?.dts

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dtb

    <Command.GCC>
        @"$(DTCPP)" $(DTCPP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        @"$(DTC)" $(DTC_FLAGS) -I dts -O dtb -o ${dst} ${d_path}(+)${s_base}.i
        @"echo" [DTC] ${s_base}

[Visual-Form-Representation-File]
    <InputFile>
        ?.vfr
        ?.Vfr
        ?.VFR

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c

    <Command>
        @"$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
        @"$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
        @"echo" [VFR] $(MODULE_NAME)

[Object-File]
    <InputFile>
        *.obj
        *.o

    <OutputFile>
        $(OUTPUT_DIR)(+)$(MODULE_NAME).lib

    <Command.MSFT, Command.INTEL>
        "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)

    <Command.GCC>
        @$(RM) ${dst}
        @"$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
        @"echo" [SLINK] $(MODULE_NAME)
    
    <Command.RVCT>
        "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
    
    <Command.RVCTCYGWIN>
        # $(OBJECT_FILES_LIST) has wrong paths for cygwin
        "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)

    <Command.XCODE>
        @"$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
        @"echo" [SLINK] $(MODULE_NAME)

[Static-Library-File]
    <InputFile>
        *.lib

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(DEBUG_DIR)(+)$(MODULE_NAME).dll

    <Command.MSFT, Command.INTEL>
        "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)

    <Command.GCC>
        @"$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(GCCLINK_PREFIX)--start-group  $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) $(GCCLINK_PREFIX)--end-group $(DLINK2_FLAGS)
        @"$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
        @"echo" [DLINK1] $(MODULE_NAME)

    <Command.RVCT>
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)

    <Command.RVCTCYGWIN>
        #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)

    <Command.XCODE>
        @"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
        @"echo" [DLINK1] $(MODULE_NAME)
    
    
[Static-Library-File.SEC.AARCH64, Static-Library-File.PEI_CORE.AARCH64, Static-Library-File.PEIM.AARCH64,Static-Library-File.SEC.ARM, Static-Library-File.PEI_CORE.ARM, Static-Library-File.PEIM.ARM]
    <InputFile>
        *.lib

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(DEBUG_DIR)(+)$(MODULE_NAME).dll

    <Command.GCC>
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_XIPFLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(CC_XIPFLAGS) $(DLINK2_FLAGS)
        "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}


[Static-Library-File.USER_DEFINED]
    <InputFile>
        *.lib

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(DEBUG_DIR)(+)$(MODULE_NAME)

    <Command.MSFT, Command.INTEL>
        "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)

    <Command.GCC>
        @"$(DLINK)" $(DLINK_FLAGS) $(GCCLINK_PREFIX)--start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) $(GCCLINK_PREFIX)--end-group $(DLINK2_FLAGS)
        @"echo" [DLINK2] $(MODULE_NAME)

    <Command.RVCT>
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)

    <Command.RVCTCYGWIN>
        #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)

    <Command.XCODE>
        @"$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
        @"echo" [DLINK2] $(MODULE_NAME)
      
      
[Dynamic-Library-File]
    <InputFile>
        ?.dll

    <OutputFile>
        $(DEBUG_DIR)(+)$(MODULE_NAME).efi

    <Command.MSFT, Command.INTEL, Command.RVCT>
        "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
        $(CP) ${dst} $(OUTPUT_DIR)
        $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
        -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR) 
    <Command.GCC>
        #$(OBJCOPY) --only-keep-debug ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
        @$(OBJCOPY) --strip-debug ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
        @$(OBJCOPY) --strip-unneeded -R .eh_frame ${src}

        #
        #The below 2 lines are only needed for UNIXGCC tool chain, which generates PE image directly
        #
        @-$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
        #-$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)
        @"echo" [OBJCOPY] $(MODULE_NAME)

        @"$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
        @$(CP) ${dst} $(OUTPUT_DIR)
        @$(CP) ${dst} $(BIN_DIR)
        @-$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
        @"echo" [GENFW] $(MODULE_NAME)
        
    <Command.XCODE>
        # tool to convert Mach-O to PE/COFF
        #@"$(STRIP)" ${src}
        @"$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
        @"echo" [MTOC] $(MODULE_NAME)
        # create symbol file for GDB debug
        #@-$(DSYMUTIL) ${src}
        @"$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
        @$(CP) ${dst} $(OUTPUT_DIR)
        @$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
        @-$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
        @"echo" [GENFW] $(MODULE_NAME)

[Dependency-Expression-File]
    <InputFile>
        ?.dxs, ?.Dxs, ?.DXS

    <OutputFile>
        $(OUTPUT_DIR)(+)$(MODULE_NAME).depex

    <ExtraDependency>
        $(MAKE_FILE)

    <Command>
        @"$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
        @Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
        @GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
        @"echo" [DEPEX] $(MODULE_NAME)

[Acpi-Source-Language-File]
    <InputFile>
        ?.asl, ?.Asl, ?.ASL

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml

    <ExtraDependency>
        $(MAKE_FILE)

    <Command.MSFT, Command.INTEL>
        @Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
        "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
        @Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii 
        "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii

    <Command.GCC>
        @Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
        @"$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
        @"echo" [ASLPP] ${s_base}
        @Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
        @"$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
        @"echo" [ASLBIN] ${s_base}

[C-Code-File.AcpiTable]
    <InputFile>
        ?.c

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi

    <ExtraDependency>
        $(MAKE_FILE)

    <Command.MSFT, Command.INTEL>
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
        "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)

    <Command.GCC>
        @"$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
        @"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
        @"echo" [ASLDLINK] ${s_base}
        @"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
        @"echo" [GENFW] ${s_base}

[Acpi-Table-Code-File]
    <InputFile>
        ?.aslc, ?.act

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi

    <ExtraDependency>
        $(MAKE_FILE)

    <Command.MSFT, Command.INTEL>
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
        "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)

    <Command.GCC>
        @"$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
        @"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
        @"echo" [ASLDLINK-ACPI] ${s_base}
        @"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
        @"echo" [GENFW-ACPI] ${s_base}
        
    <Command.XCODE>        
        @"echo" [ASLCC-ACPI] $(MODULE_NAME)
        @"$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
        @"echo" [ASLDLINK-ACPI] $(MODULE_NAME)
        @"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
        @"echo" [MTOC-ACPI] $(MODULE_NAME)
        #@"$(STRIP)" ${src}
        @"$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
        @"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
        @"echo" [GENFW-ACPI] $(MODULE_NAME)
      
      
[Masm16-Code-File]
    <InputFile>
        ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_base}.com

    <Command.MSFT, Command.INTEL>
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        cd $(OUTPUT_DIR)(+)${s_dir}
        "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
        "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,

    <Command.GCC>
      @"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
      @Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
      @"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
      @"$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
      @"echo" [MASM] $(s_base)
     
    <Command.XCODE>
      @"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
      @Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
      @"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
      @"$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
      @otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
      @"echo" [OTOOL] ${s_base}
      

[Nasm-to-Binary-Code-File]
    <InputFile>
        ?.nasmb, ?.NASMB

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_base}.bin

    <Command>
        @"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
        @Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
        @"$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
        @"echo" [NASMB] ${s_base}
        # copy the output file with .com postfix that be same to the output file of .asm16
        @$(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com

[Microcode-File.USER_DEFINED, Microcode-File.Microcode]
    <InputFile>
        ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_base}.mcb

    <Command>
        @"$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)

[Microcode-Binary-File]
    <InputFile>
        *.mcb

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)$(MODULE_NAME).bin

    <Command>
        "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
        -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin

[EFI-Image-File]
    <InputFile>
        ?.efi, ?.Efi, ?.EFI

    <OutputFile>

    <Command>

[Unicode-Text-File]
    <InputFile>
        *.uni, *.Uni, *.UNI

    <OutputFile>
        $(DEBUG_DIR)(+)AutoGen.c
        $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
        $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk

    <Command>

[Image-Definition-File]
    <InputFile>
        *.idf, *.Idf, *.IDF

    <OutputFile>
        $(DEBUG_DIR)(+)AutoGen.c
        $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
        $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk

    <Command>

[Efi-Image.UEFI_OPTIONROM]
    <InputFile>
        ?.efi, ?.EFI, ?.Efi

    <OutputFile>
        $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom

    <Command>
        $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src

[Unicode-Text-File.UEFI_HII]
    <InputFile>
        *.uni, *.Uni, *.UNI

    <OutputFile>
        $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
        $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h

    <Command>

[Image-Definition-File.UEFI_HII]
    <InputFile>
        *.idf, *.Idf, *.IDF

    <OutputFile>
        $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
        $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk

    <Command>

[Visual-Form-Representation-File.UEFI_HII]
    <InputFile>
        ?.vfr
        ?.Vfr
        ?.VFR

    <ExtraDependency>
        $(MAKE_FILE)

    <OutputFile>
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk

    <Command>
        "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
        "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i

[Hii-Binary-Package.UEFI_HII]
    <InputFile>
        *.hpk

    <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
        $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib

    <OutputFile.XCODE, OutputFile.RVCT>
        $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc

    <Command.MSFT, Command.INTEL>
        "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
        "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc

    <Command.GCC>
        @"$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
        @"$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
        @"echo" [GENFW-HII] $(MODULE_NAME)
        
    <Command.XCODE, Command.RVCT>
        @GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
        @"echo" [GENFW-HII] $(MODULE_NAME)