/** @file
  USB Mass Storage Driver that manages USB Mass Storage Device and produces Block I/O Protocol.

Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "UsbMass.h"

#define USB_MASS_TRANSPORT_COUNT    3
//
// Array of USB transport interfaces.
//
USB_MASS_TRANSPORT *mUsbMassTransport[USB_MASS_TRANSPORT_COUNT] = {
  &mUsbCbi0Transport,
  &mUsbCbi1Transport,
  &mUsbBotTransport,
};

EFI_DRIVER_BINDING_PROTOCOL gUSBMassDriverBinding = {
  USBMassDriverBindingSupported,
  USBMassDriverBindingStart,
  USBMassDriverBindingStop,
  0x11,
  NULL,
  NULL
};

/**
  Reset the block device.

  This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
  It resets the block device hardware.
  ExtendedVerification is ignored in this implementation.

  @param  This                   Indicates a pointer to the calling context.
  @param  ExtendedVerification   Indicates that the driver may perform a more exhaustive
                                 verification operation of the device during reset.

  @retval EFI_SUCCESS            The block device was reset.
  @retval EFI_DEVICE_ERROR       The block device is not functioning correctly and could not be reset.

**/
EFI_STATUS
EFIAPI
UsbMassReset (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN BOOLEAN                  ExtendedVerification
  )
{
  USB_MASS_DEVICE *UsbMass;
  EFI_TPL         OldTpl;
  EFI_STATUS      Status;

  //
  // Raise TPL to TPL_CALLBACK to serialize all its operations
  // to protect shared data structures.
  //
  OldTpl  = gBS->RaiseTPL (TPL_CALLBACK);

  UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (This);
  Status  = UsbMass->Transport->Reset (UsbMass->Context, ExtendedVerification);

  gBS->RestoreTPL (OldTpl);

  return Status;
}

/**
  Reads the requested number of blocks from the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
  It reads the requested number of blocks from the device.
  All the blocks are read, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the read request is for.
  @param  Lba                    The starting logical block address to read from on the device.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 A pointer to the destination buffer for the data. The caller is
                                 responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS            The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the read operation.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic block size of the device.
  @retval EFI_INVALID_PARAMETER  The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
UsbMassReadBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  )
{
  USB_MASS_DEVICE     *UsbMass;
  EFI_BLOCK_IO_MEDIA  *Media;
  EFI_STATUS          Status;
  EFI_TPL             OldTpl;
  UINTN               TotalBlock;

  //
  // Raise TPL to TPL_CALLBACK to serialize all its operations
  // to protect shared data structures.
  //
  OldTpl  = gBS->RaiseTPL (TPL_CALLBACK);
  UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (This);
  Media   = &UsbMass->BlockIoMedia;

  //
  // If it is a removable media, such as CD-Rom or Usb-Floppy,
  // need to detect the media before each read/write. While some of
  // Usb-Flash is marked as removable media.
  //
  if (Media->RemovableMedia) {
    Status = UsbBootDetectMedia (UsbMass);
    if (EFI_ERROR(Status)) {
      goto ON_EXIT;
    }
  }

  if (!(Media->MediaPresent)) {
    Status = EFI_NO_MEDIA;
    goto ON_EXIT;
  }

  if (MediaId != Media->MediaId) {
    Status = EFI_MEDIA_CHANGED;
    goto ON_EXIT;
  }

  if (BufferSize == 0) {
    Status = EFI_SUCCESS;
    goto ON_EXIT;
  }

  if (Buffer == NULL) {
    Status = EFI_INVALID_PARAMETER;
    goto ON_EXIT;
  }

  //
  // BufferSize must be a multiple of the intrinsic block size of the device.
  //
  if ((BufferSize % Media->BlockSize) != 0) {
    Status = EFI_BAD_BUFFER_SIZE;
    goto ON_EXIT;
  }

  TotalBlock = BufferSize / Media->BlockSize;

  //
  // Make sure the range to read is valid.
  //
  if (Lba + TotalBlock - 1 > Media->LastBlock) {
    Status = EFI_INVALID_PARAMETER;
    goto ON_EXIT;
  }

  if (UsbMass->Cdb16Byte) {
    Status = UsbBootReadWriteBlocks16 (UsbMass, FALSE, Lba, TotalBlock, Buffer);
  } else {
    Status = UsbBootReadWriteBlocks (UsbMass, FALSE, (UINT32) Lba, TotalBlock, Buffer);
  }

  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "UsbMassReadBlocks: UsbBootReadBlocks (%r) -> Reset\n", Status));
    UsbMassReset (This, TRUE);
  }

ON_EXIT:
  gBS->RestoreTPL (OldTpl);
  return Status;
}


/**
  Writes a specified number of blocks to the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
  It writes a specified number of blocks to the device.
  All blocks are written, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the write request is for.
  @param  Lba                    The starting logical block address to be written.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 Pointer to the source buffer for the data.

  @retval EFI_SUCCESS            The data were written correctly to the device.
  @retval EFI_WRITE_PROTECTED    The device cannot be written to.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the write operation.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic
                                 block size of the device.
  @retval EFI_INVALID_PARAMETER  The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
UsbMassWriteBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  IN VOID                     *Buffer
  )
{
  USB_MASS_DEVICE     *UsbMass;
  EFI_BLOCK_IO_MEDIA  *Media;
  EFI_STATUS          Status;
  EFI_TPL             OldTpl;
  UINTN               TotalBlock;

  //
  // Raise TPL to TPL_CALLBACK to serialize all its operations
  // to protect shared data structures.
  //
  OldTpl  = gBS->RaiseTPL (TPL_CALLBACK);
  UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (This);
  Media   = &UsbMass->BlockIoMedia;

  //
  // If it is a removable media, such as CD-Rom or Usb-Floppy,
  // need to detect the media before each read/write. Some of
  // USB Flash is marked as removable media.
  //
  if (Media->RemovableMedia) {
    Status = UsbBootDetectMedia (UsbMass);
    if (EFI_ERROR(Status)) {
      goto ON_EXIT;
    }
  }

  if (!(Media->MediaPresent)) {
    Status = EFI_NO_MEDIA;
    goto ON_EXIT;
  }

  if (MediaId != Media->MediaId) {
    Status = EFI_MEDIA_CHANGED;
    goto ON_EXIT;
  }

  if (BufferSize == 0) {
    Status = EFI_SUCCESS;
    goto ON_EXIT;
  }

  if (Buffer == NULL) {
    Status = EFI_INVALID_PARAMETER;
    goto ON_EXIT;
  }

  //
  // BufferSize must be a multiple of the intrinsic block size of the device.
  //
  if ((BufferSize % Media->BlockSize) != 0) {
    Status = EFI_BAD_BUFFER_SIZE;
    goto ON_EXIT;
  }

  TotalBlock = BufferSize / Media->BlockSize;

  //
  // Make sure the range to write is valid.
  //
  if (Lba + TotalBlock - 1 > Media->LastBlock) {
    Status = EFI_INVALID_PARAMETER;
    goto ON_EXIT;
  }

  //
  // Try to write the data even the device is marked as ReadOnly,
  // and clear the status should the write succeed.
  //
  if (UsbMass->Cdb16Byte) {
    Status = UsbBootReadWriteBlocks16 (UsbMass, TRUE, Lba, TotalBlock, Buffer);
  } else {
    Status = UsbBootReadWriteBlocks (UsbMass, TRUE, (UINT32) Lba, TotalBlock, Buffer);
  }

  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "UsbMassWriteBlocks: UsbBootWriteBlocks (%r) -> Reset\n", Status));
    UsbMassReset (This, TRUE);
  }

ON_EXIT:
  gBS->RestoreTPL (OldTpl);
  return Status;
}

/**
  Flushes all modified data to a physical block device.

  This function implements EFI_BLOCK_IO_PROTOCOL.FlushBlocks().
  USB mass storage device doesn't support write cache,
  so return EFI_SUCCESS directly.

  @param  This                   Indicates a pointer to the calling context.

  @retval EFI_SUCCESS            All outstanding data were written correctly to the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to write data.
  @retval EFI_NO_MEDIA           There is no media in the device.

**/
EFI_STATUS
EFIAPI
UsbMassFlushBlocks (
  IN EFI_BLOCK_IO_PROTOCOL  *This
  )
{
  return EFI_SUCCESS;
}

/**
  Initialize the media parameter data for EFI_BLOCK_IO_MEDIA of Block I/O Protocol.

  @param  UsbMass                The USB mass storage device

  @retval EFI_SUCCESS            The media parameters are updated successfully.
  @retval Others                 Failed to get the media parameters.

**/
EFI_STATUS
UsbMassInitMedia (
  IN USB_MASS_DEVICE          *UsbMass
  )
{
  EFI_BLOCK_IO_MEDIA          *Media;
  EFI_STATUS                  Status;

  Media = &UsbMass->BlockIoMedia;

  //
  // Fields of EFI_BLOCK_IO_MEDIA are defined in UEFI 2.0 spec,
  // section for Block I/O Protocol.
  //
  Media->MediaPresent     = FALSE;
  Media->LogicalPartition = FALSE;
  Media->ReadOnly         = FALSE;
  Media->WriteCaching     = FALSE;
  Media->IoAlign          = 0;
  Media->MediaId          = 1;

  Status = UsbBootGetParams (UsbMass);
  DEBUG ((DEBUG_INFO, "UsbMassInitMedia: UsbBootGetParams (%r)\n", Status));
  if (Status == EFI_MEDIA_CHANGED) {
    //
    // Some USB storage devices may report MEDIA_CHANGED sense key when hot-plugged.
    // Treat it as SUCCESS
    //
    Status = EFI_SUCCESS;
  }
  return Status;
}

/**
  Initilize the USB Mass Storage transport.

  This function tries to find the matching USB Mass Storage transport
  protocol for USB device. If found, initializes the matching transport.

  @param  This            The USB mass driver's driver binding.
  @param  Controller      The device to test.
  @param  Transport       The pointer to pointer to USB_MASS_TRANSPORT.
  @param  Context         The parameter for USB_MASS_DEVICE.Context.
  @param  MaxLun          Get the MaxLun if is BOT dev.

  @retval EFI_SUCCESS     The initialization is successful.
  @retval EFI_UNSUPPORTED No matching transport protocol is found.
  @retval Others          Failed to initialize dev.

**/
EFI_STATUS
UsbMassInitTransport (
  IN  EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN  EFI_HANDLE                   Controller,
  OUT USB_MASS_TRANSPORT           **Transport,
  OUT VOID                         **Context,
  OUT UINT8                        *MaxLun
  )
{
  EFI_USB_IO_PROTOCOL           *UsbIo;
  EFI_USB_INTERFACE_DESCRIPTOR  Interface;
  UINT8                         Index;
  EFI_STATUS                    Status;

  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiUsbIoProtocolGuid,
                  (VOID **) &UsbIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );

  if (EFI_ERROR(Status)) {
    return Status;
  }

  Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
  if (EFI_ERROR(Status)) {
    goto ON_EXIT;
  }

  Status = EFI_UNSUPPORTED;

  //
  // Traverse the USB_MASS_TRANSPORT arrary and try to find the
  // matching transport protocol.
  // If not found, return EFI_UNSUPPORTED.
  // If found, execute USB_MASS_TRANSPORT.Init() to initialize the transport context.
  //
  for (Index = 0; Index < USB_MASS_TRANSPORT_COUNT; Index++) {
    *Transport = mUsbMassTransport[Index];

    if (Interface.InterfaceProtocol == (*Transport)->Protocol) {
      Status  = (*Transport)->Init (UsbIo, Context);
      break;
    }
  }

  if (EFI_ERROR(Status)) {
    goto ON_EXIT;
  }

  //
  // For BOT device, try to get its max LUN.
  // If max LUN is 0, then it is a non-lun device.
  // Otherwise, it is a multi-lun device.
  //
  if ((*Transport)->Protocol == USB_MASS_STORE_BOT) {
    (*Transport)->GetMaxLun (*Context, MaxLun);
  }

ON_EXIT:
  gBS->CloseProtocol (
         Controller,
         &gEfiUsbIoProtocolGuid,
         This->DriverBindingHandle,
         Controller
         );
  return Status;
}

/**
  Initialize data for device that supports multiple LUNSs.

  @param  This                 The Driver Binding Protocol instance.
  @param  Controller           The device to initialize.
  @param  Transport            Pointer to USB_MASS_TRANSPORT.
  @param  Context              Parameter for USB_MASS_DEVICE.Context.
  @param  DevicePath           The remaining device path.
  @param  MaxLun               The max LUN number.

  @retval EFI_SUCCESS          At least one LUN is initialized successfully.
  @retval EFI_NOT_FOUND        Fail to initialize any of multiple LUNs.

**/
EFI_STATUS
UsbMassInitMultiLun (
  IN EFI_DRIVER_BINDING_PROTOCOL   *This,
  IN EFI_HANDLE                    Controller,
  IN USB_MASS_TRANSPORT            *Transport,
  IN VOID                          *Context,
  IN EFI_DEVICE_PATH_PROTOCOL      *DevicePath,
  IN UINT8                         MaxLun
  )
{
  USB_MASS_DEVICE                  *UsbMass;
  EFI_USB_IO_PROTOCOL              *UsbIo;
  DEVICE_LOGICAL_UNIT_DEVICE_PATH  LunNode;
  UINT8                            Index;
  EFI_STATUS                       Status;
  EFI_STATUS                       ReturnStatus;

  ASSERT (MaxLun > 0);
  ReturnStatus = EFI_NOT_FOUND;

  for (Index = 0; Index <= MaxLun; Index++) {

    DEBUG ((EFI_D_INFO, "UsbMassInitMultiLun: Start to initialize No.%d logic unit\n", Index));

    UsbIo   = NULL;
    UsbMass = AllocateZeroPool(sizeof (USB_MASS_DEVICE));
    ASSERT (UsbMass != NULL);

    UsbMass->Signature            = USB_MASS_SIGNATURE;
    UsbMass->UsbIo                = UsbIo;
    UsbMass->BlockIo.Media        = &UsbMass->BlockIoMedia;
    UsbMass->BlockIo.Reset        = UsbMassReset;
    UsbMass->BlockIo.ReadBlocks   = UsbMassReadBlocks;
    UsbMass->BlockIo.WriteBlocks  = UsbMassWriteBlocks;
    UsbMass->BlockIo.FlushBlocks  = UsbMassFlushBlocks;
    UsbMass->OpticalStorage       = FALSE;
    UsbMass->Transport            = Transport;
    UsbMass->Context              = Context;
    UsbMass->Lun                  = Index;

    //
    // Initialize the media parameter data for EFI_BLOCK_IO_MEDIA of Block I/O Protocol.
    //
    Status = UsbMassInitMedia (UsbMass);
    if ((EFI_ERROR(Status)) && (Status != EFI_NO_MEDIA)) {
      DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: UsbMassInitMedia (%r)\n", Status));
      FreePool(UsbMass);
      continue;
    }

    //
    // Create a device path node for device logic unit, and append it.
    //
    LunNode.Header.Type    = MESSAGING_DEVICE_PATH;
    LunNode.Header.SubType = MSG_DEVICE_LOGICAL_UNIT_DP;
    LunNode.Lun            = UsbMass->Lun;

    SetDevicePathNodeLength (&LunNode.Header, sizeof (LunNode));

    UsbMass->DevicePath = AppendDevicePathNode (DevicePath, &LunNode.Header);

    if (UsbMass->DevicePath == NULL) {
      DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: failed to create device logic unit device path\n"));
      Status = EFI_OUT_OF_RESOURCES;
      FreePool(UsbMass);
      continue;
    }

    InitializeDiskInfo (UsbMass);

    //
    // Create a new handle for each LUN, and install Block I/O Protocol and Device Path Protocol.
    //
    Status = gBS->InstallMultipleProtocolInterfaces (
                    &UsbMass->Controller,
                    &gEfiDevicePathProtocolGuid,
                    UsbMass->DevicePath,
                    &gEfiBlockIoProtocolGuid,
                    &UsbMass->BlockIo,
                    &gEfiDiskInfoProtocolGuid,
                    &UsbMass->DiskInfo,
                    NULL
                    );

    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: InstallMultipleProtocolInterfaces (%r)\n", Status));
      FreePool(UsbMass->DevicePath);
      FreePool(UsbMass);
      continue;
    }

    //
    // Open USB I/O Protocol by child to setup a parent-child relationship.
    //
    Status = gBS->OpenProtocol (
                    Controller,
                    &gEfiUsbIoProtocolGuid,
                    (VOID **) &UsbIo,
                    This->DriverBindingHandle,
                    UsbMass->Controller,
                    EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
                    );

    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: OpenUsbIoProtocol By Child (%r)\n", Status));
      gBS->UninstallMultipleProtocolInterfaces (
             UsbMass->Controller,
             &gEfiDevicePathProtocolGuid,
             UsbMass->DevicePath,
             &gEfiBlockIoProtocolGuid,
             &UsbMass->BlockIo,
             &gEfiDiskInfoProtocolGuid,
             &UsbMass->DiskInfo,
             NULL
             );
      FreePool(UsbMass->DevicePath);
      FreePool(UsbMass);
      continue;
    }
    ReturnStatus = EFI_SUCCESS;
    DEBUG ((EFI_D_INFO, "UsbMassInitMultiLun: Success to initialize No.%d logic unit\n", Index));
  }

  return ReturnStatus;
}

/**
  Initialize data for device that does not support multiple LUNSs.

  @param  This            The Driver Binding Protocol instance.
  @param  Controller      The device to initialize.
  @param  Transport       Pointer to USB_MASS_TRANSPORT.
  @param  Context         Parameter for USB_MASS_DEVICE.Context.

  @retval EFI_SUCCESS     Initialization succeeds.
  @retval Other           Initialization fails.

**/
EFI_STATUS
UsbMassInitNonLun (
  IN EFI_DRIVER_BINDING_PROTOCOL   *This,
  IN EFI_HANDLE                    Controller,
  IN USB_MASS_TRANSPORT            *Transport,
  IN VOID                          *Context
  )
{
  USB_MASS_DEVICE             *UsbMass;
  EFI_USB_IO_PROTOCOL         *UsbIo;
  EFI_STATUS                  Status;

  UsbIo   = NULL;
  UsbMass = AllocateZeroPool(sizeof (USB_MASS_DEVICE));
  ASSERT (UsbMass != NULL);

  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiUsbIoProtocolGuid,
                  (VOID **) &UsbIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );

  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "UsbMassInitNonLun: OpenUsbIoProtocol By Driver (%r)\n", Status));
    goto ON_ERROR;
  }

  UsbMass->Signature            = USB_MASS_SIGNATURE;
  UsbMass->Controller           = Controller;
  UsbMass->UsbIo                = UsbIo;
  UsbMass->BlockIo.Media        = &UsbMass->BlockIoMedia;
  UsbMass->BlockIo.Reset        = UsbMassReset;
  UsbMass->BlockIo.ReadBlocks   = UsbMassReadBlocks;
  UsbMass->BlockIo.WriteBlocks  = UsbMassWriteBlocks;
  UsbMass->BlockIo.FlushBlocks  = UsbMassFlushBlocks;
  UsbMass->OpticalStorage       = FALSE;
  UsbMass->Transport            = Transport;
  UsbMass->Context              = Context;

  //
  // Initialize the media parameter data for EFI_BLOCK_IO_MEDIA of Block I/O Protocol.
  //
  Status = UsbMassInitMedia (UsbMass);
  if ((EFI_ERROR(Status)) && (Status != EFI_NO_MEDIA)) {
    DEBUG ((EFI_D_ERROR, "UsbMassInitNonLun: UsbMassInitMedia (%r)\n", Status));
    goto ON_ERROR;
  }

  InitializeDiskInfo (UsbMass);

  Status = gBS->InstallMultipleProtocolInterfaces (
                  &Controller,
                  &gEfiBlockIoProtocolGuid,
                  &UsbMass->BlockIo,
                  &gEfiDiskInfoProtocolGuid,
                  &UsbMass->DiskInfo,
                  NULL
                  );
  if (EFI_ERROR(Status)) {
    goto ON_ERROR;
  }

  return EFI_SUCCESS;

ON_ERROR:
  if (UsbMass != NULL) {
    FreePool(UsbMass);
  }
  if (UsbIo != NULL) {
    gBS->CloseProtocol (
           Controller,
           &gEfiUsbIoProtocolGuid,
           This->DriverBindingHandle,
           Controller
           );
  }
  return Status;
}


/**
  Check whether the controller is a supported USB mass storage.

  @param  This                   The USB mass storage driver binding protocol.
  @param  Controller             The controller handle to check.
  @param  RemainingDevicePath    The remaining device path.

  @retval EFI_SUCCESS            The driver supports this controller.
  @retval other                  This device isn't supported.

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingSupported (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   Controller,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath
  )
{
  EFI_USB_IO_PROTOCOL           *UsbIo;
  EFI_USB_INTERFACE_DESCRIPTOR  Interface;
  USB_MASS_TRANSPORT            *Transport;
  EFI_STATUS                    Status;
  UINTN                         Index;

  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiUsbIoProtocolGuid,
                  (VOID **) &UsbIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR(Status)) {
    return Status;
  }

  //
  // Get the interface descriptor to check the USB class and find a transport
  // protocol handler.
  //
  Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
  if (EFI_ERROR(Status)) {
    goto ON_EXIT;
  }

  Status = EFI_UNSUPPORTED;

  if (Interface.InterfaceClass != USB_MASS_STORE_CLASS) {
    goto ON_EXIT;
  }

  //
  // Traverse the USB_MASS_TRANSPORT arrary and try to find the
  // matching transport method.
  // If not found, return EFI_UNSUPPORTED.
  // If found, execute USB_MASS_TRANSPORT.Init() to initialize the transport context.
  //
  for (Index = 0; Index < USB_MASS_TRANSPORT_COUNT; Index++) {
    Transport = mUsbMassTransport[Index];
    if (Interface.InterfaceProtocol == Transport->Protocol) {
      Status = Transport->Init (UsbIo, NULL);
      break;
    }
  }

ON_EXIT:
  gBS->CloseProtocol (
         Controller,
         &gEfiUsbIoProtocolGuid,
         This->DriverBindingHandle,
         Controller
         );

  return Status;
}

/**
  Starts the USB mass storage device with this driver.

  This function consumes USB I/O Portocol, intializes USB mass storage device,
  installs Block I/O Protocol, and submits Asynchronous Interrupt
  Transfer to manage the USB mass storage device.

  @param  This                  The USB mass storage driver binding protocol.
  @param  Controller            The USB mass storage device to start on
  @param  RemainingDevicePath   The remaining device path.

  @retval EFI_SUCCESS           This driver supports this device.
  @retval EFI_UNSUPPORTED       This driver does not support this device.
  @retval EFI_DEVICE_ERROR      This driver cannot be started due to device Error.
  @retval EFI_OUT_OF_RESOURCES  Can't allocate memory resources.
  @retval EFI_ALREADY_STARTED   This driver has been started.

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStart (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   Controller,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath
  )
{
  USB_MASS_TRANSPORT            *Transport;
  EFI_DEVICE_PATH_PROTOCOL      *DevicePath;
  VOID                          *Context;
  UINT8                         MaxLun;
  EFI_STATUS                    Status;
  EFI_USB_IO_PROTOCOL           *UsbIo;
  EFI_TPL                       OldTpl;

  OldTpl = gBS->RaiseTPL (TPL_CALLBACK);

  Transport = NULL;
  Context   = NULL;
  MaxLun    = 0;

  Status = UsbMassInitTransport (This, Controller, &Transport, &Context, &MaxLun);

  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: UsbMassInitTransport (%r)\n", Status));
    goto Exit;
  }
  if (MaxLun == 0) {
    //
    // Initialize data for device that does not support multiple LUNSs.
    //
    Status = UsbMassInitNonLun (This, Controller, Transport, Context);
    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: UsbMassInitNonLun (%r)\n", Status));
    }
  } else {
    //
    // Open device path to prepare for appending Device Logic Unit node.
    //
    Status = gBS->OpenProtocol (
                    Controller,
                    &gEfiDevicePathProtocolGuid,
                    (VOID **) &DevicePath,
                    This->DriverBindingHandle,
                    Controller,
                    EFI_OPEN_PROTOCOL_BY_DRIVER
                    );

    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: OpenDevicePathProtocol By Driver (%r)\n", Status));
      goto Exit;
    }

    Status = gBS->OpenProtocol (
                    Controller,
                    &gEfiUsbIoProtocolGuid,
                    (VOID **) &UsbIo,
                    This->DriverBindingHandle,
                    Controller,
                    EFI_OPEN_PROTOCOL_BY_DRIVER
                    );

    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: OpenUsbIoProtocol By Driver (%r)\n", Status));
      gBS->CloseProtocol (
             Controller,
             &gEfiDevicePathProtocolGuid,
             This->DriverBindingHandle,
             Controller
             );
      goto Exit;
    }

    //
    // Initialize data for device that supports multiple LUNs.
    // EFI_SUCCESS is returned if at least 1 LUN is initialized successfully.
    //
    Status = UsbMassInitMultiLun (This, Controller, Transport, Context, DevicePath, MaxLun);
    if (EFI_ERROR(Status)) {
      gBS->CloseProtocol (
              Controller,
              &gEfiDevicePathProtocolGuid,
              This->DriverBindingHandle,
              Controller
              );
      gBS->CloseProtocol (
              Controller,
              &gEfiUsbIoProtocolGuid,
              This->DriverBindingHandle,
              Controller
              );
      DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: UsbMassInitMultiLun (%r) with Maxlun=%d\n", Status, MaxLun));
    }
  }
Exit:
  gBS->RestoreTPL (OldTpl);
  return Status;
}


/**
  Stop controlling the device.

  @param  This                   The USB mass storage driver binding
  @param  Controller             The device controller controlled by the driver.
  @param  NumberOfChildren       The number of children of this device
  @param  ChildHandleBuffer      The buffer of children handle.

  @retval EFI_SUCCESS            The driver stopped from controlling the device.
  @retval EFI_DEVICE_ERROR       The device could not be stopped due to a device error.
  @retval EFI_UNSUPPORTED        Block I/O Protocol is not installed on Controller.
  @retval Others                 Failed to stop the driver

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStop (
  IN  EFI_DRIVER_BINDING_PROTOCOL *This,
  IN  EFI_HANDLE                  Controller,
  IN  UINTN                       NumberOfChildren,
  IN  EFI_HANDLE                  *ChildHandleBuffer
  )
{
  EFI_STATUS            Status;
  USB_MASS_DEVICE       *UsbMass;
  EFI_USB_IO_PROTOCOL   *UsbIo;
  EFI_BLOCK_IO_PROTOCOL *BlockIo;
  UINTN                 Index;
  BOOLEAN               AllChildrenStopped;

  //
  // This is a bus driver stop function since multi-lun is supported.
  // There are three kinds of device handles that might be passed:
  // 1st is a handle with USB I/O & Block I/O installed (non-multi-lun)
  // 2nd is a handle with Device Path & USB I/O installed (multi-lun root)
  // 3rd is a handle with Device Path & USB I/O & Block I/O installed (multi-lun).
  //
  if (NumberOfChildren == 0) {
    //
    // A handle without any children, might be 1st and 2nd type.
    //
    Status = gBS->OpenProtocol (
                    Controller,
                    &gEfiBlockIoProtocolGuid,
                    (VOID **) &BlockIo,
                    This->DriverBindingHandle,
                    Controller,
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL
                    );

    if (EFI_ERROR(Status)) {
      //
      // This is a 2nd type handle(multi-lun root), it needs to close devicepath
      // and usbio protocol.
      //
      gBS->CloseProtocol (
            Controller,
            &gEfiDevicePathProtocolGuid,
            This->DriverBindingHandle,
            Controller
            );
      gBS->CloseProtocol (
            Controller,
            &gEfiUsbIoProtocolGuid,
            This->DriverBindingHandle,
            Controller
            );
      DEBUG ((EFI_D_INFO, "Success to stop multi-lun root handle\n"));
      return EFI_SUCCESS;
    }

    //
    // This is a 1st type handle(non-multi-lun), which only needs to uninstall
    // Block I/O Protocol, close USB I/O Protocol and free mass device.
    //
    UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (BlockIo);

    //
    // Uninstall Block I/O protocol from the device handle,
    // then call the transport protocol to stop itself.
    //
    Status = gBS->UninstallMultipleProtocolInterfaces (
                    Controller,
                    &gEfiBlockIoProtocolGuid,
                    &UsbMass->BlockIo,
                    &gEfiDiskInfoProtocolGuid,
                    &UsbMass->DiskInfo,
                    NULL
                    );
    if (EFI_ERROR(Status)) {
      return Status;
    }

    gBS->CloseProtocol (
          Controller,
          &gEfiUsbIoProtocolGuid,
          This->DriverBindingHandle,
          Controller
          );

    UsbMass->Transport->CleanUp (UsbMass->Context);
    FreePool(UsbMass);

    DEBUG ((EFI_D_INFO, "Success to stop non-multi-lun root handle\n"));
    return EFI_SUCCESS;
  }

  //
  // This is a 3rd type handle(multi-lun), which needs uninstall
  // Block I/O Protocol and Device Path Protocol, close USB I/O Protocol and
  // free mass device for all children.
  //
  AllChildrenStopped = TRUE;

  for (Index = 0; Index < NumberOfChildren; Index++) {

    Status = gBS->OpenProtocol (
                    ChildHandleBuffer[Index],
                    &gEfiBlockIoProtocolGuid,
                    (VOID **) &BlockIo,
                    This->DriverBindingHandle,
                    Controller,
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL
                    );
    if (EFI_ERROR(Status)) {
      AllChildrenStopped = FALSE;
      DEBUG ((EFI_D_ERROR, "Fail to stop No.%d multi-lun child handle when opening blockio\n", (UINT32)Index));
      continue;
    }

    UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (BlockIo);

    gBS->CloseProtocol (
           Controller,
           &gEfiUsbIoProtocolGuid,
           This->DriverBindingHandle,
           ChildHandleBuffer[Index]
           );

    Status = gBS->UninstallMultipleProtocolInterfaces (
                    ChildHandleBuffer[Index],
                    &gEfiDevicePathProtocolGuid,
                    UsbMass->DevicePath,
                    &gEfiBlockIoProtocolGuid,
                    &UsbMass->BlockIo,
                    &gEfiDiskInfoProtocolGuid,
                    &UsbMass->DiskInfo,
                    NULL
                    );

    if (EFI_ERROR(Status)) {
      //
      // Fail to uninstall Block I/O Protocol and Device Path Protocol, so re-open USB I/O Protocol by child.
      //
      AllChildrenStopped = FALSE;
      DEBUG ((EFI_D_ERROR, "Fail to stop No.%d multi-lun child handle when uninstalling blockio and devicepath\n", (UINT32)Index));

      gBS->OpenProtocol (
             Controller,
             &gEfiUsbIoProtocolGuid,
             (VOID **) &UsbIo,
             This->DriverBindingHandle,
             ChildHandleBuffer[Index],
             EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
             );
    } else {
      //
      // Succeed to stop this multi-lun handle, so go on with next child.
      //
      if (((Index + 1) == NumberOfChildren) && AllChildrenStopped) {
        UsbMass->Transport->CleanUp (UsbMass->Context);
      }
      FreePool(UsbMass);
    }
  }

  if (!AllChildrenStopped) {
    return EFI_DEVICE_ERROR;
  }

  DEBUG ((EFI_D_INFO, "Success to stop all %d multi-lun children handles\n", (UINT32) NumberOfChildren));
  return EFI_SUCCESS;
}

/**
  Entrypoint of USB Mass Storage Driver.

  This function is the entrypoint of USB Mass Storage Driver. It installs Driver Binding
  Protocol together with Component Name Protocols.

  @param  ImageHandle       The firmware allocated handle for the EFI image.
  @param  SystemTable       A pointer to the EFI System Table.

  @retval EFI_SUCCESS       The entry point is executed successfully.

**/
EFI_STATUS
EFIAPI
USBMassStorageEntryPoint (
  IN EFI_HANDLE               ImageHandle,
  IN EFI_SYSTEM_TABLE         *SystemTable
  )
{
  EFI_STATUS  Status;

  //
  // Install driver binding protocol
  //
  Status = EfiLibInstallDriverBindingComponentName2 (
             ImageHandle,
             SystemTable,
             &gUSBMassDriverBinding,
             ImageHandle,
             &gUsbMassStorageComponentName,
             &gUsbMassStorageComponentName2
             );
  ASSERT_EFI_ERROR(Status);

  return EFI_SUCCESS;
}