Upstream/CloverBootloader
1
0
Fork 0
mirror of https://github.com/CloverHackyColor/CloverBootloader.git synced 2024-11-30 12:43:41 +01:00
Code Issues Packages Projects Releases Wiki Activity
0052021260
CloverBootloader/MdePkg/Include/Protocol/Ip6.h
Sergey Isakov 7c0aa811ec initial commit Clover sources 5061 and modules from EDK2 latest with legacy codes from UDK2018 
Signed-off-by: Sergey Isakov <isakov-sl@bk.ru>
2019-09-03 12:58:42 +03:00

948 lines
40 KiB
C
Raw Blame History

/** @file
This file defines the EFI IPv6 (Internet Protocol version 6)
Protocol interface. It is split into the following three main
sections:
- EFI IPv6 Service Binding Protocol
- EFI IPv6 Variable (deprecated in UEFI 2.4B)
- EFI IPv6 Protocol
The EFI IPv6 Protocol provides basic network IPv6 packet I/O services,
which includes support for Neighbor Discovery Protocol (ND), Multicast
Listener Discovery Protocol (MLD), and a subset of the Internet Control
Message Protocol (ICMPv6).
Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Revision Reference:
This Protocol is introduced in UEFI Specification 2.2
**/
#ifndef __EFI_IP6_PROTOCOL_H__
#define __EFI_IP6_PROTOCOL_H__
#include <Protocol/ManagedNetwork.h>
#define EFI_IP6_SERVICE_BINDING_PROTOCOL_GUID \
{ \
0xec835dd3, 0xfe0f, 0x617b, {0xa6, 0x21, 0xb3, 0x50, 0xc3, 0xe1, 0x33, 0x88 } \
}
#define EFI_IP6_PROTOCOL_GUID \
{ \
0x2c8759d5, 0x5c2d, 0x66ef, {0x92, 0x5f, 0xb6, 0x6c, 0x10, 0x19, 0x57, 0xe2 } \
}
typedef struct _EFI_IP6_PROTOCOL EFI_IP6_PROTOCOL;
///
/// EFI_IP6_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not be used any more.
/// The definition in here is only present to provide backwards compatability.
///
typedef struct{
///
/// The EFI IPv6 Protocol instance handle that is using this address/prefix pair.
///
EFI_HANDLE InstanceHandle;
///
/// IPv6 address in network byte order.
///
EFI_IPv6_ADDRESS Ip6Address;
///
/// The length of the prefix associated with the Ip6Address.
///
UINT8 PrefixLength;
} EFI_IP6_ADDRESS_PAIR;
///
/// EFI_IP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not be used any more.
/// The definition in here is only present to provide backwards compatability.
///
typedef struct {
///
/// The handle of the driver that creates this entry.
///
EFI_HANDLE DriverHandle;
///
/// The number of IPv6 address pairs that follow this data structure.
///
UINT32 AddressCount;
///
/// List of IPv6 address pairs that are currently in use.
///
EFI_IP6_ADDRESS_PAIR AddressPairs[1];
} EFI_IP6_VARIABLE_DATA;
///
/// ICMPv6 type definitions for error messages
///
///@{
#define ICMP_V6_DEST_UNREACHABLE 0x1
#define ICMP_V6_PACKET_TOO_BIG 0x2
#define ICMP_V6_TIME_EXCEEDED 0x3
#define ICMP_V6_PARAMETER_PROBLEM 0x4
///@}
///
/// ICMPv6 type definition for informational messages
///
///@{
#define ICMP_V6_ECHO_REQUEST 0x80
#define ICMP_V6_ECHO_REPLY 0x81
#define ICMP_V6_LISTENER_QUERY 0x82
#define ICMP_V6_LISTENER_REPORT 0x83
#define ICMP_V6_LISTENER_DONE 0x84
#define ICMP_V6_ROUTER_SOLICIT 0x85
#define ICMP_V6_ROUTER_ADVERTISE 0x86
#define ICMP_V6_NEIGHBOR_SOLICIT 0x87
#define ICMP_V6_NEIGHBOR_ADVERTISE 0x88
#define ICMP_V6_REDIRECT 0x89
#define ICMP_V6_LISTENER_REPORT_2 0x8F
///@}
///
/// ICMPv6 code definitions for ICMP_V6_DEST_UNREACHABLE
///
///@{
#define ICMP_V6_NO_ROUTE_TO_DEST 0x0
#define ICMP_V6_COMM_PROHIBITED 0x1
#define ICMP_V6_BEYOND_SCOPE 0x2
#define ICMP_V6_ADDR_UNREACHABLE 0x3
#define ICMP_V6_PORT_UNREACHABLE 0x4
#define ICMP_V6_SOURCE_ADDR_FAILED 0x5
#define ICMP_V6_ROUTE_REJECTED 0x6
///@}
///
/// ICMPv6 code definitions for ICMP_V6_TIME_EXCEEDED
///
///@{
#define ICMP_V6_TIMEOUT_HOP_LIMIT 0x0
#define ICMP_V6_TIMEOUT_REASSEMBLE 0x1
///@}
///
/// ICMPv6 code definitions for ICMP_V6_PARAMETER_PROBLEM
///
///@{
#define ICMP_V6_ERRONEOUS_HEADER 0x0
#define ICMP_V6_UNRECOGNIZE_NEXT_HDR 0x1
#define ICMP_V6_UNRECOGNIZE_OPTION 0x2
///@}
///
/// EFI_IP6_CONFIG_DATA
/// is used to report and change IPv6 session parameters.
///
typedef struct {
///
/// For the IPv6 packet to send and receive, this is the default value
/// of the 'Next Header' field in the last IPv6 extension header or in
/// the IPv6 header if there are no extension headers. Ignored when
/// AcceptPromiscuous is TRUE.
///
UINT8 DefaultProtocol;
///
/// Set to TRUE to receive all IPv6 packets that get through the
/// receive filters.
/// Set to FALSE to receive only the DefaultProtocol IPv6
/// packets that get through the receive filters. Ignored when
/// AcceptPromiscuous is TRUE.
///
BOOLEAN AcceptAnyProtocol;
///
/// Set to TRUE to receive ICMP error report packets. Ignored when
/// AcceptPromiscuous or AcceptAnyProtocol is TRUE.
///
BOOLEAN AcceptIcmpErrors;
///
/// Set to TRUE to receive all IPv6 packets that are sent to any
/// hardware address or any protocol address. Set to FALSE to stop
/// receiving all promiscuous IPv6 packets.
///
BOOLEAN AcceptPromiscuous;
///
/// The destination address of the packets that will be transmitted.
/// Ignored if it is unspecified.
///
EFI_IPv6_ADDRESS DestinationAddress;
///
/// The station IPv6 address that will be assigned to this EFI IPv6
/// Protocol instance. This field can be set and changed only when
/// the EFI IPv6 driver is transitioning from the stopped to the started
/// states. If the StationAddress is specified, the EFI IPv6 Protocol
/// driver will deliver only incoming IPv6 packets whose destination
/// matches this IPv6 address exactly. The StationAddress is required
/// to be one of currently configured IPv6 addresses. An address
/// containing all zeroes is also accepted as a special case. Under this
/// situation, the IPv6 driver is responsible for binding a source
/// address to this EFI IPv6 protocol instance according to the source
/// address selection algorithm. Only incoming packets destined to
/// the selected address will be delivered to the user. And the
/// selected station address can be retrieved through later
/// GetModeData() call. If no address is available for selecting,
/// EFI_NO_MAPPING will be returned, and the station address will
/// only be successfully bound to this EFI IPv6 protocol instance
/// after IP6ModeData.IsConfigured changed to TRUE.
///
EFI_IPv6_ADDRESS StationAddress;
///
/// TrafficClass field in transmitted IPv6 packets. Default value
/// is zero.
///
UINT8 TrafficClass;
///
/// HopLimit field in transmitted IPv6 packets.
///
UINT8 HopLimit;
///
/// FlowLabel field in transmitted IPv6 packets. Default value is
/// zero.
///
UINT32 FlowLabel;
///
/// The timer timeout value (number of microseconds) for the
/// receive timeout event to be associated with each assembled
/// packet. Zero means do not drop assembled packets.
///
UINT32 ReceiveTimeout;
///
/// The timer timeout value (number of microseconds) for the
/// transmit timeout event to be associated with each outgoing
/// packet. Zero means do not drop outgoing packets.
///
UINT32 TransmitTimeout;
} EFI_IP6_CONFIG_DATA;
///
/// EFI_IP6_ADDRESS_INFO
///
typedef struct {
EFI_IPv6_ADDRESS Address; ///< The IPv6 address.
UINT8 PrefixLength; ///< The length of the prefix associated with the Address.
} EFI_IP6_ADDRESS_INFO;
///
/// EFI_IP6_ROUTE_TABLE
/// is the entry structure that is used in routing tables
///
typedef struct {
///
/// The IPv6 address of the gateway to be used as the next hop for
/// packets to this prefix. If the IPv6 address is all zeros, then the
/// prefix is on-link.
///
EFI_IPv6_ADDRESS Gateway;
///
/// The destination prefix to be routed.
///
EFI_IPv6_ADDRESS Destination;
///
/// The length of the prefix associated with the Destination.
///
UINT8 PrefixLength;
} EFI_IP6_ROUTE_TABLE;
///
/// EFI_IP6_NEIGHBOR_STATE
///
typedef enum {
///
/// Address resolution is being performed on this entry. Specially,
/// Neighbor Solicitation has been sent to the solicited-node
/// multicast address of the target, but corresponding Neighbor
/// Advertisement has not been received.
///
EfiNeighborInComplete,
///
/// Positive confirmation was received that the forward path to the
/// neighbor was functioning properly.
///
EfiNeighborReachable,
///
///Reachable Time has elapsed since the last positive confirmation
///was received. In this state, the forward path to the neighbor was
///functioning properly.
///
EfiNeighborStale,
///
/// This state is an optimization that gives upper-layer protocols
/// additional time to provide reachability confirmation.
///
EfiNeighborDelay,
///
/// A reachability confirmation is actively sought by retransmitting
/// Neighbor Solicitations every RetransTimer milliseconds until a
/// reachability confirmation is received.
///
EfiNeighborProbe
} EFI_IP6_NEIGHBOR_STATE;
///
/// EFI_IP6_NEIGHBOR_CACHE
/// is the entry structure that is used in neighbor cache. It records a set
/// of entries about individual neighbors to which traffic has been sent recently.
///
typedef struct {
EFI_IPv6_ADDRESS Neighbor; ///< The on-link unicast/anycast IP address of the neighbor.
EFI_MAC_ADDRESS LinkAddress; ///< Link-layer address of the neighbor.
EFI_IP6_NEIGHBOR_STATE State; ///< State of this neighbor cache entry.
} EFI_IP6_NEIGHBOR_CACHE;
///
/// EFI_IP6_ICMP_TYPE
/// is used to describe those ICMP messages that are supported by this EFI
/// IPv6 Protocol driver.
///
typedef struct {
UINT8 Type; ///< The type of ICMP message.
UINT8 Code; ///< The code of the ICMP message.
} EFI_IP6_ICMP_TYPE;
///
/// EFI_IP6_MODE_DATA
///
typedef struct {
///
/// Set to TRUE after this EFI IPv6 Protocol instance is started.
/// All other fields in this structure are undefined until this field is TRUE.
/// Set to FALSE when the EFI IPv6 Protocol instance is stopped.
///
BOOLEAN IsStarted;
///
/// The maximum packet size, in bytes, of the packet which the upper layer driver could feed.
///
UINT32 MaxPacketSize;
///
/// Current configuration settings. Undefined until IsStarted is TRUE.
///
EFI_IP6_CONFIG_DATA ConfigData;
///
/// Set to TRUE when the EFI IPv6 Protocol instance is configured.
/// The instance is configured when it has a station address and
/// corresponding prefix length.
/// Set to FALSE when the EFI IPv6 Protocol instance is not configured.
///
BOOLEAN IsConfigured;
///
/// Number of configured IPv6 addresses on this interface.
///
UINT32 AddressCount;
///
/// List of currently configured IPv6 addresses and corresponding
/// prefix lengths assigned to this interface. It is caller's
/// responsibility to free this buffer.
///
EFI_IP6_ADDRESS_INFO *AddressList;
///
/// Number of joined multicast groups. Undefined until
/// IsConfigured is TRUE.
///
UINT32 GroupCount;
///
/// List of joined multicast group addresses. It is caller's
/// responsibility to free this buffer. Undefined until
/// IsConfigured is TRUE.
///
EFI_IPv6_ADDRESS *GroupTable;
///
/// Number of entries in the routing table. Undefined until
/// IsConfigured is TRUE.
///
UINT32 RouteCount;
///
/// Routing table entries. It is caller's responsibility to free this buffer.
///
EFI_IP6_ROUTE_TABLE *RouteTable;
///
/// Number of entries in the neighbor cache. Undefined until
/// IsConfigured is TRUE.
///
UINT32 NeighborCount;
///
/// Neighbor cache entries. It is caller's responsibility to free this
/// buffer. Undefined until IsConfigured is TRUE.
///
EFI_IP6_NEIGHBOR_CACHE *NeighborCache;
///
/// Number of entries in the prefix table. Undefined until
/// IsConfigured is TRUE.
///
UINT32 PrefixCount;
///
/// On-link Prefix table entries. It is caller's responsibility to free this
/// buffer. Undefined until IsConfigured is TRUE.
///
EFI_IP6_ADDRESS_INFO *PrefixTable;
///
/// Number of entries in the supported ICMP types list.
///
UINT32 IcmpTypeCount;
///
/// Array of ICMP types and codes that are supported by this EFI
/// IPv6 Protocol driver. It is caller's responsibility to free this
/// buffer.
///
EFI_IP6_ICMP_TYPE *IcmpTypeList;
} EFI_IP6_MODE_DATA;
///
/// EFI_IP6_HEADER
/// The fields in the IPv6 header structure are defined in the Internet
/// Protocol version6 specification.
///
#pragma pack(1)
typedef struct _EFI_IP6_HEADER {
UINT8 TrafficClassH:4;
UINT8 Version:4;
UINT8 FlowLabelH:4;
UINT8 TrafficClassL:4;
UINT16 FlowLabelL;
UINT16 PayloadLength;
UINT8 NextHeader;
UINT8 HopLimit;
EFI_IPv6_ADDRESS SourceAddress;
EFI_IPv6_ADDRESS DestinationAddress;
} EFI_IP6_HEADER;
#pragma pack()
///
/// EFI_IP6_FRAGMENT_DATA
/// describes the location and length of the IPv6 packet
/// fragment to transmit or that has been received.
///
typedef struct _EFI_IP6_FRAGMENT_DATA {
UINT32 FragmentLength; ///< Length of fragment data. This field may not be set to zero.
VOID *FragmentBuffer; ///< Pointer to fragment data. This field may not be set to NULL.
} EFI_IP6_FRAGMENT_DATA;
///
/// EFI_IP6_RECEIVE_DATA
///
typedef struct _EFI_IP6_RECEIVE_DATA {
///
/// Time when the EFI IPv6 Protocol driver accepted the packet.
/// Ignored if it is zero.
///
EFI_TIME TimeStamp;
///
/// After this event is signaled, the receive data structure is released
/// and must not be referenced.
///
EFI_EVENT RecycleSignal;
///
///Length of the IPv6 packet headers, including both the IPv6
///header and any extension headers.
///
UINT32 HeaderLength;
///
/// Pointer to the IPv6 packet header. If the IPv6 packet was
/// fragmented, this argument is a pointer to the header in the first
/// fragment.
///
EFI_IP6_HEADER *Header;
///
/// Sum of the lengths of IPv6 packet buffers in FragmentTable. May
/// be zero.
///
UINT32 DataLength;
///
/// Number of IPv6 payload fragments. May be zero.
///
UINT32 FragmentCount;
///
/// Array of payload fragment lengths and buffer pointers.
///
EFI_IP6_FRAGMENT_DATA FragmentTable[1];
} EFI_IP6_RECEIVE_DATA;
///
/// EFI_IP6_OVERRIDE_DATA
/// The information and flags in the override data structure will override
/// default parameters or settings for one Transmit() function call.
///
typedef struct _EFI_IP6_OVERRIDE_DATA {
UINT8 Protocol; ///< Protocol type override.
UINT8 HopLimit; ///< Hop-Limit override.
UINT32 FlowLabel; ///< Flow-Label override.
} EFI_IP6_OVERRIDE_DATA;
///
/// EFI_IP6_TRANSMIT_DATA
///
typedef struct _EFI_IP6_TRANSMIT_DATA {
///
/// The destination IPv6 address. If it is unspecified,
/// ConfigData.DestinationAddress will be used instead.
///
EFI_IPv6_ADDRESS DestinationAddress;
///
/// If not NULL, the IPv6 transmission control override data.
///
EFI_IP6_OVERRIDE_DATA *OverrideData;
///
/// Total length in byte of the IPv6 extension headers specified in
/// ExtHdrs.
///
UINT32 ExtHdrsLength;
///
/// Pointer to the IPv6 extension headers. The IP layer will append
/// the required extension headers if they are not specified by
/// ExtHdrs. Ignored if ExtHdrsLength is zero.
///
VOID *ExtHdrs;
///
/// The protocol of first extension header in ExtHdrs. Ignored if
/// ExtHdrsLength is zero.
///
UINT8 NextHeader;
///
/// Total length in bytes of the FragmentTable data to transmit.
///
UINT32 DataLength;
///
/// Number of entries in the fragment data table.
///
UINT32 FragmentCount;
///
/// Start of the fragment data table.
///
EFI_IP6_FRAGMENT_DATA FragmentTable[1];
} EFI_IP6_TRANSMIT_DATA;
///
/// EFI_IP6_COMPLETION_TOKEN
/// structures are used for both transmit and receive operations.
///
typedef struct {
///
/// This Event will be signaled after the Status field is updated by
/// the EFI IPv6 Protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL.
///
EFI_EVENT Event;
///
/// Will be set to one of the following values:
/// - EFI_SUCCESS: The receive or transmit completed
/// successfully.
/// - EFI_ABORTED: The receive or transmit was aborted
/// - EFI_TIMEOUT: The transmit timeout expired.
/// - EFI_ICMP_ERROR: An ICMP error packet was received.
/// - EFI_DEVICE_ERROR: An unexpected system or network
/// error occurred.
/// - EFI_SECURITY_VIOLATION: The transmit or receive was
/// failed because of an IPsec policy check.
/// - EFI_NO_MEDIA: There was a media error.
///
EFI_STATUS Status;
union {
///
/// When the Token is used for receiving, RxData is a pointer to the EFI_IP6_RECEIVE_DATA.
///
EFI_IP6_RECEIVE_DATA *RxData;
///
/// When the Token is used for transmitting, TxData is a pointer to the EFI_IP6_TRANSMIT_DATA.
///
EFI_IP6_TRANSMIT_DATA *TxData;
} Packet;
} EFI_IP6_COMPLETION_TOKEN;
/**
Gets the current operational settings for this instance of the EFI IPv6 Protocol driver.
The GetModeData() function returns the current operational mode data for this driver instance.
The data fields in EFI_IP6_MODE_DATA are read only. This function is used optionally to
retrieve the operational mode data of underlying networks or drivers..
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[out] Ip6ModeData Pointer to the EFI IPv6 Protocol mode data structure.
@param[out] MnpConfigData Pointer to the managed network configuration data structure.
@param[out] SnpModeData Pointer to the simple network mode data structure.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_GET_MODE_DATA)(
IN EFI_IP6_PROTOCOL *This,
OUT EFI_IP6_MODE_DATA *Ip6ModeData OPTIONAL,
OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL,
OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL
);
/**
Assigns an IPv6 address and subnet mask to this EFI IPv6 Protocol driver instance.
The Configure() function is used to set, change, or reset the operational parameters and filter
settings for this EFI IPv6 Protocol instance. Until these parameters have been set, no network traffic
can be sent or received by this instance. Once the parameters have been reset (by calling this
function with Ip6ConfigData set to NULL), no more traffic can be sent or received until these
parameters have been set again. Each EFI IPv6 Protocol instance can be started and stopped
independently of each other by enabling or disabling their receive filter settings with the
Configure() function.
If Ip6ConfigData.StationAddress is a valid non-zero IPv6 unicast address, it is required
to be one of the currently configured IPv6 addresses list in the EFI IPv6 drivers, or else
EFI_INVALID_PARAMETER will be returned. If Ip6ConfigData.StationAddress is
unspecified, the IPv6 driver will bind a source address according to the source address selection
algorithm. Clients could frequently call GetModeData() to check get currently configured IPv6
address list in the EFI IPv6 driver. If both Ip6ConfigData.StationAddress and
Ip6ConfigData.Destination are unspecified, when transmitting the packet afterwards, the
source address filled in each outgoing IPv6 packet is decided based on the destination of this packet. .
If operational parameters are reset or changed, any pending transmit and receive requests will be
cancelled. Their completion token status will be set to EFI_ABORTED and their events will be
signaled.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] Ip6ConfigData Pointer to the EFI IPv6 Protocol configuration data structure.
@retval EFI_SUCCESS The driver instance was successfully opened.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- Ip6ConfigData.StationAddress is neither zero nor
a unicast IPv6 address.
- Ip6ConfigData.StationAddress is neither zero nor
one of the configured IP addresses in the EFI IPv6 driver.
- Ip6ConfigData.DefaultProtocol is illegal.
@retval EFI_OUT_OF_RESOURCES The EFI IPv6 Protocol driver instance data could not be allocated.
@retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing a source address for
this instance, but no source address was available for use.
@retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the IPv6
address or prefix length can be changed.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv6
Protocol driver instance is not opened.
@retval EFI_UNSUPPORTED Default protocol specified through
Ip6ConfigData.DefaulProtocol isn't supported.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_CONFIGURE)(
IN EFI_IP6_PROTOCOL *This,
IN EFI_IP6_CONFIG_DATA *Ip6ConfigData OPTIONAL
);
/**
Joins and leaves multicast groups.
The Groups() function is used to join and leave multicast group sessions. Joining a group will
enable reception of matching multicast packets. Leaving a group will disable reception of matching
multicast packets. Source-Specific Multicast isn't required to be supported.
If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] JoinFlag Set to TRUE to join the multicast group session and FALSE to leave.
@param[in] GroupAddress Pointer to the IPv6 multicast address.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER One or more of the following is TRUE:
- This is NULL.
- JoinFlag is TRUE and GroupAddress is NULL.
- GroupAddress is not NULL and *GroupAddress is
not a multicast IPv6 address.
- GroupAddress is not NULL and *GroupAddress is in the
range of SSM destination address.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_OUT_OF_RESOURCES System resources could not be allocated.
@retval EFI_UNSUPPORTED This EFI IPv6 Protocol implementation does not support multicast groups.
@retval EFI_ALREADY_STARTED The group address is already in the group table (when
JoinFlag is TRUE).
@retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_GROUPS)(
IN EFI_IP6_PROTOCOL *This,
IN BOOLEAN JoinFlag,
IN EFI_IPv6_ADDRESS *GroupAddress OPTIONAL
);
/**
Adds and deletes routing table entries.
The Routes() function adds a route to or deletes a route from the routing table.
Routes are determined by comparing the leftmost PrefixLength bits of Destination with
the destination IPv6 address arithmetically. The gateway address must be on the same subnet as the
configured station address.
The default route is added with Destination and PrefixLegth both set to all zeros. The
default route matches all destination IPv6 addresses that do not match any other routes.
All EFI IPv6 Protocol instances share a routing table.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] DeleteRoute Set to TRUE to delete this route from the routing table. Set to
FALSE to add this route to the routing table. Destination,
PrefixLength and Gateway are used as the key to each
route entry.
@param[in] Destination The address prefix of the subnet that needs to be routed.
@param[in] PrefixLength The prefix length of Destination. Ignored if Destination
is NULL.
@param[in] GatewayAddress The unicast gateway IPv6 address for this route.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The driver instance has not been started.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- When DeleteRoute is TRUE, both Destination and
GatewayAddress are NULL.
- When DeleteRoute is FALSE, either Destination or
GatewayAddress is NULL.
- *GatewayAddress is not a valid unicast IPv6 address.
- *GatewayAddress is one of the local configured IPv6
addresses.
@retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.
@retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE).
@retval EFI_ACCESS_DENIED The route is already defined in the routing table (when
DeleteRoute is FALSE).
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_ROUTES)(
IN EFI_IP6_PROTOCOL *This,
IN BOOLEAN DeleteRoute,
IN EFI_IPv6_ADDRESS *Destination OPTIONAL,
IN UINT8 PrefixLength,
IN EFI_IPv6_ADDRESS *GatewayAddress OPTIONAL
);
/**
Add or delete Neighbor cache entries.
The Neighbors() function is used to add, update, or delete an entry from neighbor cache.
IPv6 neighbor cache entries are typically inserted and updated by the network protocol driver as
network traffic is processed. Most neighbor cache entries will time out and be deleted if the network
traffic stops. Neighbor cache entries that were inserted by Neighbors() may be static (will not
timeout) or dynamic (will time out).
The implementation should follow the neighbor cache timeout mechanism which is defined in
RFC4861. The default neighbor cache timeout value should be tuned for the expected network
environment
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] DeleteFlag Set to TRUE to delete the specified cache entry, set to FALSE to
add (or update, if it already exists and Override is TRUE) the
specified cache entry. TargetIp6Address is used as the key
to find the requested cache entry.
@param[in] TargetIp6Address Pointer to Target IPv6 address.
@param[in] TargetLinkAddress Pointer to link-layer address of the target. Ignored if NULL.
@param[in] Timeout Time in 100-ns units that this entry will remain in the neighbor
cache, it will be deleted after Timeout. A value of zero means that
the entry is permanent. A non-zero value means that the entry is
dynamic.
@param[in] Override If TRUE, the cached link-layer address of the matching entry will
be overridden and updated; if FALSE, EFI_ACCESS_DENIED
will be returned if a corresponding cache entry already existed.
@retval EFI_SUCCESS The data has been queued for transmission.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- TargetIpAddress is NULL.
- *TargetLinkAddress is invalid when not NULL.
- *TargetIpAddress is not a valid unicast IPv6 address.
- *TargetIpAddress is one of the local configured IPv6
addresses.
@retval EFI_OUT_OF_RESOURCES Could not add the entry to the neighbor cache.
@retval EFI_NOT_FOUND This entry is not in the neighbor cache (when DeleteFlag is
TRUE or when DeleteFlag is FALSE while
TargetLinkAddress is NULL.).
@retval EFI_ACCESS_DENIED The to-be-added entry is already defined in the neighbor cache,
and that entry is tagged as un-overridden (when DeleteFlag
is FALSE).
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_NEIGHBORS)(
IN EFI_IP6_PROTOCOL *This,
IN BOOLEAN DeleteFlag,
IN EFI_IPv6_ADDRESS *TargetIp6Address,
IN EFI_MAC_ADDRESS *TargetLinkAddress,
IN UINT32 Timeout,
IN BOOLEAN Override
);
/**
Places outgoing data packets into the transmit queue.
The Transmit() function places a sending request in the transmit queue of this
EFI IPv6 Protocol instance. Whenever the packet in the token is sent out or some
errors occur, the event in the token will be signaled and the status is updated.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] Token Pointer to the transmit token.
@retval EFI_SUCCESS The data has been queued for transmission.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing a source address for
this transmission, but no source address was available for use.
@retval EFI_INVALID_PARAMETER One or more of the following is TRUE:
- This is NULL.
- Token is NULL.
- Token.Event is NULL.
- Token.Packet.TxData is NULL.
- Token.Packet.ExtHdrsLength is not zero and Token.Packet.ExtHdrs is NULL.
- Token.Packet.FragmentCount is zero.
- One or more of the Token.Packet.TxData.FragmentTable[].FragmentLength fields is zero.
- One or more of the Token.Packet.TxData.FragmentTable[].FragmentBuffer fields is NULL.
- Token.Packet.TxData.DataLength is zero or not equal to the sum of fragment lengths.
- Token.Packet.TxData.DestinationAddress is non-zero when DestinationAddress is configured as
non-zero when doing Configure() for this EFI IPv6 protocol instance.
- Token.Packet.TxData.DestinationAddress is unspecified when DestinationAddress is unspecified
when doing Configure() for this EFI IPv6 protocol instance.
@retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event
was already in the transmit queue.
@retval EFI_NOT_READY The completion token could not be queued because the transmit
queue is full.
@retval EFI_NOT_FOUND Not route is found to destination address.
@retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.
@retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too
short to transmit.
@retval EFI_BAD_BUFFER_SIZE If Token.Packet.TxData.DataLength is beyond the
maximum that which can be described through the Fragment Offset
field in Fragment header when performing fragmentation.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_TRANSMIT)(
IN EFI_IP6_PROTOCOL *This,
IN EFI_IP6_COMPLETION_TOKEN *Token
);
/**
Places a receiving request into the receiving queue.
The Receive() function places a completion token into the receive packet queue.
This function is always asynchronous.
The Token.Event field in the completion token must be filled in by the caller
and cannot be NULL. When the receive operation completes, the EFI IPv6 Protocol
driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event
is signaled.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] Token Pointer to a token that is associated with the receive data descriptor.
@retval EFI_SUCCESS The receive completion token was cached.
@retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started.
@retval EFI_NO_MAPPING When IP6 driver responsible for binding source address to this instance,
while no source address is available for use.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- Token is NULL.
- Token.Event is NULL.
@retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system
resources (usually memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
The EFI IPv6 Protocol instance has been reset to startup defaults.
@retval EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already
in the receive queue.
@retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_RECEIVE)(
IN EFI_IP6_PROTOCOL *This,
IN EFI_IP6_COMPLETION_TOKEN *Token
);
/**
Abort an asynchronous transmit or receive request.
The Cancel() function is used to abort a pending transmit or receive request.
If the token is in the transmit or receive request queues, after calling this
function, Token->Status will be set to EFI_ABORTED and then Token->Event will
be signaled. If the token is not in one of the queues, which usually means the
asynchronous operation has completed, this function will not signal the token
and EFI_NOT_FOUND is returned.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@param[in] Token Pointer to a token that has been issued by
EFI_IP6_PROTOCOL.Transmit() or
EFI_IP6_PROTOCOL.Receive(). If NULL, all pending
tokens are aborted. Type EFI_IP6_COMPLETION_TOKEN is
defined in EFI_IP6_PROTOCOL.Transmit().
@retval EFI_SUCCESS The asynchronous I/O request was aborted and
Token->Event was signaled. When Token is NULL, all
pending requests were aborted and their events were signaled.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was
not found in the transmit or receive queue. It has either completed
or was not issued by Transmit() and Receive().
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_CANCEL)(
IN EFI_IP6_PROTOCOL *This,
IN EFI_IP6_COMPLETION_TOKEN *Token OPTIONAL
);
/**
Polls for incoming data packets and processes outgoing data packets.
The Poll() function polls for incoming data packets and processes outgoing data
packets. Network drivers and applications can call the EFI_IP6_PROTOCOL.Poll()
function to increase the rate that data packets are moved between the communications
device and the transmit and receive queues.
In some systems the periodic timer event may not poll the underlying communications
device fast enough to transmit and/or receive all data packets without missing
incoming packets or dropping outgoing packets. Drivers and applications that are
experiencing packet loss should try calling the EFI_IP6_PROTOCOL.Poll() function
more often.
@param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_NOT_READY No incoming or outgoing data is processed.
@retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.
Consider increasing the polling rate.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_IP6_POLL)(
IN EFI_IP6_PROTOCOL *This
);
///
/// The EFI IPv6 Protocol implements a simple packet-oriented interface that can be
/// used by drivers, daemons, and applications to transmit and receive network packets.
///
struct _EFI_IP6_PROTOCOL {
EFI_IP6_GET_MODE_DATA GetModeData;
EFI_IP6_CONFIGURE Configure;
EFI_IP6_GROUPS Groups;
EFI_IP6_ROUTES Routes;
EFI_IP6_NEIGHBORS Neighbors;
EFI_IP6_TRANSMIT Transmit;
EFI_IP6_RECEIVE Receive;
EFI_IP6_CANCEL Cancel;
EFI_IP6_POLL Poll;
};
extern EFI_GUID gEfiIp6ServiceBindingProtocolGuid;
extern EFI_GUID gEfiIp6ProtocolGuid;
#endif
Reference in New Issue View Git Blame Copy Permalink