CloverBootloader/OvmfPkg/8259InterruptControllerDxe/8259.h

219 lines
6.8 KiB
C

/** @file
Driver implementing the Tiano Legacy 8259 Protocol
Copyright (c) 2005 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _8259_H__
#define _8259_H__
#include <Protocol/Legacy8259.h>
#include <Protocol/PciIo.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/BaseLib.h>
#include <Library/PcdLib.h>
#include <IndustryStandard/Pci.h>
// 8259 Hardware definitions
#define LEGACY_MODE_BASE_VECTOR_MASTER 0x08
#define LEGACY_MODE_BASE_VECTOR_SLAVE 0x70
#define PROTECTED_MODE_BASE_VECTOR_MASTER 0x68
#define PROTECTED_MODE_BASE_VECTOR_SLAVE 0x70
#define LEGACY_8259_CONTROL_REGISTER_MASTER 0x20
#define LEGACY_8259_MASK_REGISTER_MASTER 0x21
#define LEGACY_8259_CONTROL_REGISTER_SLAVE 0xA0
#define LEGACY_8259_MASK_REGISTER_SLAVE 0xA1
#define LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_MASTER 0x4D0
#define LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_SLAVE 0x4D1
#define LEGACY_8259_EOI 0x20
// Protocol Function Prototypes
/**
Sets the base address for the 8259 master and slave PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] MasterBase Interrupt vectors for IRQ0-IRQ7.
@param[in] SlaveBase Interrupt vectors for IRQ8-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while writing to the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetVectorBase (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN UINT8 MasterBase,
IN UINT8 SlaveBase
);
/**
Gets the current 16-bit real mode and 32-bit protected-mode IRQ masks.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[out] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15.
@param[out] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15.
@param[out] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15.
@param[out] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while reading the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetMask (
IN EFI_LEGACY_8259_PROTOCOL *This,
OUT UINT16 *LegacyMask OPTIONAL,
OUT UINT16 *LegacyEdgeLevel OPTIONAL,
OUT UINT16 *ProtectedMask OPTIONAL,
OUT UINT16 *ProtectedEdgeLevel OPTIONAL
);
/**
Sets the current 16-bit real mode and 32-bit protected-mode IRQ masks.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15.
@param[in] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15.
@param[in] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15.
@param[in] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while writing the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetMask (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN UINT16 *LegacyMask OPTIONAL,
IN UINT16 *LegacyEdgeLevel OPTIONAL,
IN UINT16 *ProtectedMask OPTIONAL,
IN UINT16 *ProtectedEdgeLevel OPTIONAL
);
/**
Sets the mode of the PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Mode 16-bit real or 32-bit protected mode.
@param[in] Mask The value with which to set the interrupt mask.
@param[in] EdgeLevel The value with which to set the edge/level mask.
@retval EFI_SUCCESS The mode was set successfully.
@retval EFI_INVALID_PARAMETER The mode was not set.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetMode (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_MODE Mode,
IN UINT16 *Mask OPTIONAL,
IN UINT16 *EdgeLevel OPTIONAL
);
/**
Translates the IRQ into a vector.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@param[out] Vector The vector that is assigned to the IRQ.
@retval EFI_SUCCESS The Vector that matches Irq was returned.
@retval EFI_INVALID_PARAMETER Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetVector (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq,
OUT UINT8 *Vector
);
/**
Enables the specified IRQ.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@param[in] LevelTriggered 0 = Edge triggered; 1 = Level triggered.
@retval EFI_SUCCESS The Irq was enabled on the 8259 PIC.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259EnableIrq (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq,
IN BOOLEAN LevelTriggered
);
/**
Disables the specified IRQ.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@retval EFI_SUCCESS The Irq was disabled on the 8259 PIC.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259DisableIrq (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq
);
/**
Reads the PCI configuration space to get the interrupt number that is assigned to the card.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] PciHandle PCI function for which to return the vector.
@param[out] Vector IRQ number that corresponds to the interrupt line.
@retval EFI_SUCCESS The interrupt line value was read successfully.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetInterruptLine (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT UINT8 *Vector
);
/**
Issues the End of Interrupt (EOI) commands to PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq The interrupt for which to issue the EOI command.
@retval EFI_SUCCESS The EOI command was issued.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259EndOfInterrupt (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq
);
#endif