CloverBootloader/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
SergeySlice d7c710f9e3 fix some addresses issue, format text
Signed-off-by: SergeySlice <sergey.slice@gmail.com>
2020-04-28 13:49:24 +03:00

2088 lines
71 KiB
C

/** @file
EFI PCI IO protocol functions implementation for PCI Bus module.
Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "PciBus.h"
extern EDKII_IOMMU_PROTOCOL *mIoMmuProtocol;
//
// Pci Io Protocol Interface
//
EFI_PCI_IO_PROTOCOL mPciIoInterface = {
PciIoPollMem,
PciIoPollIo,
{
PciIoMemRead,
PciIoMemWrite
},
{
PciIoIoRead,
PciIoIoWrite
},
{
PciIoConfigRead,
PciIoConfigWrite
},
PciIoCopyMem,
PciIoMap,
PciIoUnmap,
PciIoAllocateBuffer,
PciIoFreeBuffer,
PciIoFlush,
PciIoGetLocation,
PciIoAttributes,
PciIoGetBarAttributes,
PciIoSetBarAttributes,
0,
NULL
};
/**
Initializes a PCI I/O Instance.
@param PciIoDevice Pci device instance.
**/
VOID
InitializePciIoInstance (
IN PCI_IO_DEVICE *PciIoDevice
)
{
CopyMem (&PciIoDevice->PciIo, &mPciIoInterface, sizeof (EFI_PCI_IO_PROTOCOL));
}
/**
Verifies access to a PCI Base Address Register (BAR).
@param PciIoDevice Pci device instance.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param Type Operation type could be memory or I/O.
@param Width Signifies the width of the memory or I/O operations.
@param Count The number of memory or I/O operations to perform.
@param Offset The offset within the PCI configuration space for the PCI controller.
@retval EFI_INVALID_PARAMETER Invalid Width/BarIndex or Bar type.
@retval EFI_SUCCESS Successfully verified.
**/
EFI_STATUS
PciIoVerifyBarAccess (
IN PCI_IO_DEVICE *PciIoDevice,
IN UINT8 BarIndex,
IN PCI_BAR_TYPE Type,
IN IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN IN UINTN Count,
IN UINT64 *Offset
)
{
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (BarIndex == EFI_PCI_IO_PASS_THROUGH_BAR) {
return EFI_SUCCESS;
}
//
// BarIndex 0-5 is legal
//
if (BarIndex >= PCI_MAX_BAR) {
return EFI_INVALID_PARAMETER;
}
if (!CheckBarType (PciIoDevice, BarIndex, Type)) {
return EFI_INVALID_PARAMETER;
}
//
// If Width is EfiPciIoWidthFifoUintX then convert to EfiPciIoWidthUintX
// If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX
//
if (Width >= EfiPciIoWidthFifoUint8 && Width <= EfiPciIoWidthFifoUint64) {
Count = 1;
}
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & 0x03);
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PciIoDevice->PciBar[BarIndex].Length) {
return EFI_INVALID_PARAMETER;
}
*Offset = *Offset + PciIoDevice->PciBar[BarIndex].BaseAddress;
return EFI_SUCCESS;
}
/**
Verifies access to a PCI Configuration Header.
@param PciIoDevice Pci device instance.
@param Width Signifies the width of the memory or I/O operations.
@param Count The number of memory or I/O operations to perform.
@param Offset The offset within the PCI configuration space for the PCI controller.
@retval EFI_INVALID_PARAMETER Invalid Width
@retval EFI_UNSUPPORTED Offset overflowed.
@retval EFI_SUCCESS Successfully verified.
**/
EFI_STATUS
PciIoVerifyConfigAccess (
IN PCI_IO_DEVICE *PciIoDevice,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINTN Count,
IN UINT64 *Offset
)
{
UINT64 ExtendOffset;
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
//
// If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX
//
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & 0x03);
if (PciIoDevice->IsPciExp) {
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_EXP_MAX_CONFIG_OFFSET) {
return EFI_UNSUPPORTED;
}
ExtendOffset = LShiftU64 (*Offset, 32);
*Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, 0);
*Offset = (*Offset) | ExtendOffset;
} else {
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_MAX_CONFIG_OFFSET) {
return EFI_UNSUPPORTED;
}
*Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, *Offset);
}
return EFI_SUCCESS;
}
/**
Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is
satisfied or after a defined duration.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory operation to perform.
@param Offset The offset within the selected BAR to start the memory operation.
@param Mask Mask used for the polling criteria.
@param Value The comparison value used for the polling exit criteria.
@param Delay The number of 100 ns units to poll.
@param Result Pointer to the last value read from the memory location.
@retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED Offset is not valid for the BarIndex of this PCI controller.
@retval EFI_TIMEOUT Delay expired before a match occurred.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoPollMem (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINT64 Mask,
IN UINT64 Value,
IN UINT64 Delay,
OUT UINT64 *Result
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, 1, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
if (Width > EfiPciIoWidthUint64) {
return EFI_INVALID_PARAMETER;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Status = PciIoMemRead (This, Width, BarIndex, Offset, 1, Result);
if (EFI_ERROR(Status)) {
return Status;
}
if ((*Result & Mask) == Value || Delay == 0) {
return EFI_SUCCESS;
}
do {
//
// Stall 10 us = 100 * 100ns
//
gBS->Stall (10);
Status = PciIoMemRead (This, Width, BarIndex, Offset, 1, Result);
if (EFI_ERROR(Status)) {
return Status;
}
if ((*Result & Mask) == Value) {
return EFI_SUCCESS;
}
if (Delay <= 100) {
return EFI_TIMEOUT;
}
Delay -= 100;
} while (TRUE);
}
}
Status = PciIoDevice->PciRootBridgeIo->PollMem (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Mask,
Value,
Delay,
Result
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Reads from the memory space of a PCI controller. Returns either when the polling exit criteria is
satisfied or after a defined duration.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory operation to perform.
@param Offset The offset within the selected BAR to start the memory operation.
@param Mask Mask used for the polling criteria.
@param Value The comparison value used for the polling exit criteria.
@param Delay The number of 100 ns units to poll.
@param Result Pointer to the last value read from the memory location.
@retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED Offset is not valid for the BarIndex of this PCI controller.
@retval EFI_TIMEOUT Delay expired before a match occurred.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoPollIo (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINT64 Mask,
IN UINT64 Value,
IN UINT64 Delay,
OUT UINT64 *Result
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width > EfiPciIoWidthUint64) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, 1, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Status = PciIoIoRead (This, Width, BarIndex, Offset, 1, Result);
if (EFI_ERROR(Status)) {
return Status;
}
if ((*Result & Mask) == Value || Delay == 0) {
return EFI_SUCCESS;
}
do {
//
// Stall 10 us = 100 * 100ns
//
gBS->Stall (10);
Status = PciIoIoRead (This, Width, BarIndex, Offset, 1, Result);
if (EFI_ERROR(Status)) {
return Status;
}
if ((*Result & Mask) == Value) {
return EFI_SUCCESS;
}
if (Delay <= 100) {
return EFI_TIMEOUT;
}
Delay -= 100;
} while (TRUE);
}
}
Status = PciIoDevice->PciRootBridgeIo->PollIo (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Mask,
Value,
Delay,
Result
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param Offset The offset within the selected BAR to start the memory or I/O operation.
@param Count The number of memory or I/O operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI BAR specified by BarIndex.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoMemRead (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Mem.Read (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param Offset The offset within the selected BAR to start the memory or I/O operation.
@param Count The number of memory or I/O operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI BAR specified by BarIndex.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoMemWrite (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Mem.Write (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param Offset The offset within the selected BAR to start the memory or I/O operation.
@param Count The number of memory or I/O operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI BAR specified by BarIndex.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoIoRead (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Io.Read (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory or I/O operations.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param Offset The offset within the selected BAR to start the memory or I/O operation.
@param Count The number of memory or I/O operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI BAR specified by BarIndex.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoIoWrite (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 BarIndex,
IN UINT64 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Io.Write (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Offset,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in PCI configuration space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory operations.
@param Offset The offset within the PCI configuration space for the PCI controller.
@param Count The number of PCI configuration operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI configuration header of the PCI controller.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER Buffer is NULL or Width is invalid.
**/
EFI_STATUS
EFIAPI
PciIoConfigRead (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT32 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
UINT64 Address;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
Address = Offset;
Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address);
if (EFI_ERROR(Status)) {
return Status;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Pci.Read (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Address,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enable a PCI driver to access PCI controller registers in PCI configuration space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory operations.
@param Offset The offset within the PCI configuration space for the PCI controller.
@param Count The number of PCI configuration operations to perform.
@param Buffer For read operations, the destination buffer to store the results. For write
operations, the source buffer to write data from.
@retval EFI_SUCCESS The data was read from or written to the PCI controller.
@retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
valid for the PCI configuration header of the PCI controller.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER Buffer is NULL or Width is invalid.
**/
EFI_STATUS
EFIAPI
PciIoConfigWrite (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT32 Offset,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
UINT64 Address;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
Address = Offset;
Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address);
if (EFI_ERROR(Status)) {
return Status;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->Pci.Write (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
Address,
Count,
Buffer
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Enables a PCI driver to copy one region of PCI memory space to another region of PCI
memory space.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Width Signifies the width of the memory operations.
@param DestBarIndex The BAR index in the standard PCI Configuration header to use as the
base address for the memory operation to perform.
@param DestOffset The destination offset within the BAR specified by DestBarIndex to
start the memory writes for the copy operation.
@param SrcBarIndex The BAR index in the standard PCI Configuration header to use as the
base address for the memory operation to perform.
@param SrcOffset The source offset within the BAR specified by SrcBarIndex to start
the memory reads for the copy operation.
@param Count The number of memory operations to perform. Bytes moved is Width
size * Count, starting at DestOffset and SrcOffset.
@retval EFI_SUCCESS The data was copied from one memory region to another memory region.
@retval EFI_UNSUPPORTED DestBarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED SrcBarIndex not valid for this PCI controller.
@retval EFI_UNSUPPORTED The address range specified by DestOffset, Width, and Count
is not valid for the PCI BAR specified by DestBarIndex.
@retval EFI_UNSUPPORTED The address range specified by SrcOffset, Width, and Count is
not valid for the PCI BAR specified by SrcBarIndex.
@retval EFI_INVALID_PARAMETER Width is invalid.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
**/
EFI_STATUS
EFIAPI
PciIoCopyMem (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
IN UINT8 DestBarIndex,
IN UINT64 DestOffset,
IN UINT8 SrcBarIndex,
IN UINT64 SrcOffset,
IN UINTN Count
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Width >= EfiPciIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
if (Width == EfiPciIoWidthFifoUint8 ||
Width == EfiPciIoWidthFifoUint16 ||
Width == EfiPciIoWidthFifoUint32 ||
Width == EfiPciIoWidthFifoUint64 ||
Width == EfiPciIoWidthFillUint8 ||
Width == EfiPciIoWidthFillUint16 ||
Width == EfiPciIoWidthFillUint32 ||
Width == EfiPciIoWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
Status = PciIoVerifyBarAccess (PciIoDevice, DestBarIndex, PciBarTypeMem, Width, Count, &DestOffset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
Status = PciIoVerifyBarAccess (PciIoDevice, SrcBarIndex, PciBarTypeMem, Width, Count, &SrcOffset);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
//
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((SrcOffset & ((1 << (Width & 0x03)) - 1)) != 0 || (DestOffset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
}
Status = PciIoDevice->PciRootBridgeIo->CopyMem (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
DestOffset,
SrcOffset,
Count
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Provides the PCI controller-specific addresses needed to access system memory.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Operation Indicates if the bus master is going to read or write to system memory.
@param HostAddress The system memory address to map to the PCI controller.
@param NumberOfBytes On input the number of bytes to map. On output the number of bytes
that were mapped.
@param DeviceAddress The resulting map address for the bus master PCI controller to use to
access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
@retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
**/
EFI_STATUS
EFIAPI
PciIoMap (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_OPERATION Operation,
IN VOID *HostAddress,
IN OUT UINTN *NumberOfBytes,
OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
OUT VOID **Mapping
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
UINT64 IoMmuAttribute;
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION RootBridgeIoOperation;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((UINT32)Operation >= EfiPciIoOperationMaximum) {
return EFI_INVALID_PARAMETER;
}
if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL) {
return EFI_INVALID_PARAMETER;
}
RootBridgeIoOperation = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION)Operation;
if ((PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) != 0) {
RootBridgeIoOperation = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION)(Operation + EfiPciOperationBusMasterRead64);
}
Status = PciIoDevice->PciRootBridgeIo->Map (
PciIoDevice->PciRootBridgeIo,
RootBridgeIoOperation,
HostAddress,
NumberOfBytes,
DeviceAddress,
Mapping
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
if (mIoMmuProtocol != NULL) {
if (!EFI_ERROR(Status)) {
switch (Operation) {
case EfiPciIoOperationBusMasterRead:
IoMmuAttribute = EDKII_IOMMU_ACCESS_READ;
break;
case EfiPciIoOperationBusMasterWrite:
IoMmuAttribute = EDKII_IOMMU_ACCESS_WRITE;
break;
case EfiPciIoOperationBusMasterCommonBuffer:
IoMmuAttribute = EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE;
break;
default:
ASSERT(FALSE);
return EFI_INVALID_PARAMETER;
}
mIoMmuProtocol->SetAttribute (
mIoMmuProtocol,
PciIoDevice->Handle,
*Mapping,
IoMmuAttribute
);
}
}
return Status;
}
/**
Completes the Map() operation and releases any corresponding resources.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Mapping The mapping value returned from Map().
@retval EFI_SUCCESS The range was unmapped.
@retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
**/
EFI_STATUS
EFIAPI
PciIoUnmap (
IN EFI_PCI_IO_PROTOCOL *This,
IN VOID *Mapping
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if (mIoMmuProtocol != NULL) {
mIoMmuProtocol->SetAttribute (
mIoMmuProtocol,
PciIoDevice->Handle,
Mapping,
0
);
}
Status = PciIoDevice->PciRootBridgeIo->Unmap (
PciIoDevice->PciRootBridgeIo,
Mapping
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Allocates pages that are suitable for an EfiPciIoOperationBusMasterCommonBuffer
or EfiPciOperationBusMasterCommonBuffer64 mapping.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Type This parameter is not used and must be ignored.
@param MemoryType The type of memory to allocate, EfiBootServicesData or
EfiRuntimeServicesData.
@param Pages The number of pages to allocate.
@param HostAddress A pointer to store the base system memory address of the
allocated range.
@param Attributes The requested bit mask of attributes for the allocated range.
@retval EFI_SUCCESS The requested memory pages were allocated.
@retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
MEMORY_WRITE_COMBINE, MEMORY_CACHED and DUAL_ADDRESS_CYCLE.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
**/
EFI_STATUS
EFIAPI
PciIoAllocateBuffer (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_ALLOCATE_TYPE Type,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN Pages,
OUT VOID **HostAddress,
IN UINT64 Attributes
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
if ((Attributes &
(~(EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE | EFI_PCI_ATTRIBUTE_MEMORY_CACHED))) != 0){
return EFI_UNSUPPORTED;
}
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if ((PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) != 0) {
Attributes |= EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE;
}
Status = PciIoDevice->PciRootBridgeIo->AllocateBuffer (
PciIoDevice->PciRootBridgeIo,
Type,
MemoryType,
Pages,
HostAddress,
Attributes
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Frees memory that was allocated with AllocateBuffer().
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Pages The number of pages to free.
@param HostAddress The base system memory address of the allocated range.
@retval EFI_SUCCESS The requested memory pages were freed.
@retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
was not allocated with AllocateBuffer().
**/
EFI_STATUS
EFIAPI
PciIoFreeBuffer (
IN EFI_PCI_IO_PROTOCOL *This,
IN UINTN Pages,
IN VOID *HostAddress
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
Status = PciIoDevice->PciRootBridgeIo->FreeBuffer (
PciIoDevice->PciRootBridgeIo,
Pages,
HostAddress
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Flushes all PCI posted write transactions from a PCI host bridge to system memory.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
bridge to system memory.
@retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
host bridge due to a hardware error.
**/
EFI_STATUS
EFIAPI
PciIoFlush (
IN EFI_PCI_IO_PROTOCOL *This
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
Status = PciIoDevice->PciRootBridgeIo->Flush (
PciIoDevice->PciRootBridgeIo
);
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Retrieves this PCI controller's current PCI bus number, device number, and function number.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param SegmentNumber The PCI controller's current PCI segment number.
@param BusNumber The PCI controller's current PCI bus number.
@param DeviceNumber The PCI controller's current PCI device number.
@param FunctionNumber The PCI controller's current PCI function number.
@retval EFI_SUCCESS The PCI controller location was returned.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
EFI_STATUS
EFIAPI
PciIoGetLocation (
IN EFI_PCI_IO_PROTOCOL *This,
OUT UINTN *Segment,
OUT UINTN *Bus,
OUT UINTN *Device,
OUT UINTN *Function
)
{
PCI_IO_DEVICE *PciIoDevice;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if (Segment == NULL || Bus == NULL || Device == NULL || Function == NULL) {
return EFI_INVALID_PARAMETER;
}
*Segment = PciIoDevice->PciRootBridgeIo->SegmentNumber;
*Bus = PciIoDevice->BusNumber;
*Device = PciIoDevice->DeviceNumber;
*Function = PciIoDevice->FunctionNumber;
return EFI_SUCCESS;
}
/**
Check BAR type for PCI resource.
@param PciIoDevice PCI device instance.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for the memory or I/O operation to perform.
@param BarType Memory or I/O.
@retval TRUE Pci device's bar type is same with input BarType.
@retval TRUE Pci device's bar type is not same with input BarType.
**/
BOOLEAN
CheckBarType (
IN PCI_IO_DEVICE *PciIoDevice,
IN UINT8 BarIndex,
IN PCI_BAR_TYPE BarType
)
{
switch (BarType) {
case PciBarTypeMem:
if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem32 &&
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem32 &&
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem64 &&
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem64 ) {
return FALSE;
}
return TRUE;
case PciBarTypeIo:
if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo32 &&
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo16){
return FALSE;
}
return TRUE;
default:
break;
}
return FALSE;
}
/**
Set/Disable new attributes to a Root Bridge.
@param PciIoDevice Pci device instance.
@param Attributes New attribute want to be set.
@param Operation Set or Disable.
@retval EFI_UNSUPPORTED If root bridge does not support change attribute.
@retval EFI_SUCCESS Successfully set new attributes.
**/
EFI_STATUS
ModifyRootBridgeAttributes (
IN PCI_IO_DEVICE *PciIoDevice,
IN UINT64 Attributes,
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation
)
{
UINT64 PciRootBridgeSupports;
UINT64 PciRootBridgeAttributes;
UINT64 NewPciRootBridgeAttributes;
EFI_STATUS Status;
//
// Get the current attributes of this PCI device's PCI Root Bridge
//
Status = PciIoDevice->PciRootBridgeIo->GetAttributes (
PciIoDevice->PciRootBridgeIo,
&PciRootBridgeSupports,
&PciRootBridgeAttributes
);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
//
// Mask off attributes not supported by PCI root bridge.
//
Attributes &= ~(UINT64)(EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE |
EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM |
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE);
//
// Record the new attribute of the Root Bridge
//
if (Operation == EfiPciIoAttributeOperationEnable) {
NewPciRootBridgeAttributes = PciRootBridgeAttributes | Attributes;
} else {
NewPciRootBridgeAttributes = PciRootBridgeAttributes & (~Attributes);
}
//
// Call the PCI Root Bridge to attempt to modify the attributes
//
if ((NewPciRootBridgeAttributes ^ PciRootBridgeAttributes) != 0) {
Status = PciIoDevice->PciRootBridgeIo->SetAttributes (
PciIoDevice->PciRootBridgeIo,
NewPciRootBridgeAttributes,
NULL,
NULL
);
if (EFI_ERROR(Status)) {
//
// The PCI Root Bridge could not modify the attributes, so return the error.
//
return EFI_UNSUPPORTED;
}
}
//
// Also update the attributes for this Root Bridge structure
//
PciIoDevice->Attributes = NewPciRootBridgeAttributes;
return EFI_SUCCESS;
}
/**
Check whether this device can be enable/disable to snoop.
@param PciIoDevice Pci device instance.
@param Operation Enable/Disable.
@retval EFI_UNSUPPORTED Pci device is not GFX device or not support snoop.
@retval EFI_SUCCESS Snoop can be supported.
**/
EFI_STATUS
SupportPaletteSnoopAttributes (
IN PCI_IO_DEVICE *PciIoDevice,
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation
)
{
PCI_IO_DEVICE *Temp;
UINT16 VGACommand;
//
// Snoop attribute can be only modified by GFX
//
if (!IS_PCI_GFX (&PciIoDevice->Pci)) {
return EFI_UNSUPPORTED;
}
//
// Get the boot VGA on the same Host Bridge
//
Temp = LocateVgaDeviceOnHostBridge (PciIoDevice->PciRootBridgeIo->ParentHandle);
if (Temp == NULL) {
//
// If there is no VGA device on the segment, set
// this graphics card to decode the palette range
//
return EFI_SUCCESS;
}
//
// Check these two agents are on the same path
//
if (!PciDevicesOnTheSamePath (Temp, PciIoDevice)) {
//
// they are not on the same path, so snoop can be enabled or disabled
//
return EFI_SUCCESS;
}
//
// Check if they are on the same bus
//
if (Temp->Parent == PciIoDevice->Parent) {
PCI_READ_COMMAND_REGISTER (Temp, &VGACommand);
//
// If they are on the same bus, either one can
// be set to snoop, the other set to decode
//
if ((VGACommand & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) != 0) {
//
// VGA has set to snoop, so GFX can be only set to disable snoop
//
if (Operation == EfiPciIoAttributeOperationEnable) {
return EFI_UNSUPPORTED;
}
} else {
//
// VGA has disabled to snoop, so GFX can be only enabled
//
if (Operation == EfiPciIoAttributeOperationDisable) {
return EFI_UNSUPPORTED;
}
}
return EFI_SUCCESS;
}
//
// If they are on the same path but on the different bus
// The first agent is set to snoop, the second one set to
// decode
//
if (Temp->BusNumber < PciIoDevice->BusNumber) {
//
// GFX should be set to decode
//
if (Operation == EfiPciIoAttributeOperationDisable) {
PCI_ENABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP);
Temp->Attributes |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP;
} else {
return EFI_UNSUPPORTED;
}
} else {
//
// GFX should be set to snoop
//
if (Operation == EfiPciIoAttributeOperationEnable) {
PCI_DISABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP);
Temp->Attributes &= (~(UINT64)EFI_PCI_COMMAND_VGA_PALETTE_SNOOP);
} else {
return EFI_UNSUPPORTED;
}
}
return EFI_SUCCESS;
}
/**
Performs an operation on the attributes that this PCI controller supports. The operations include
getting the set of supported attributes, retrieving the current attributes, setting the current
attributes, enabling attributes, and disabling attributes.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Operation The operation to perform on the attributes for this PCI controller.
@param Attributes The mask of attributes that are used for Set, Enable, and Disable
operations.
@param Result A pointer to the result mask of attributes that are returned for the Get
and Supported operations.
@retval EFI_SUCCESS The operation on the PCI controller's attributes was completed.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_UNSUPPORTED one or more of the bits set in
Attributes are not supported by this PCI controller or one of
its parent bridges when Operation is Set, Enable or Disable.
**/
EFI_STATUS
EFIAPI
PciIoAttributes (
IN EFI_PCI_IO_PROTOCOL * This,
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation,
IN UINT64 Attributes,
OUT UINT64 *Result OPTIONAL
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
PCI_IO_DEVICE *UpStreamBridge;
PCI_IO_DEVICE *Temp;
UINT64 Supports;
UINT64 UpStreamAttributes;
UINT16 BridgeControl;
UINT16 Command;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
switch (Operation) {
case EfiPciIoAttributeOperationGet:
if (Result == NULL) {
return EFI_INVALID_PARAMETER;
}
*Result = PciIoDevice->Attributes;
return EFI_SUCCESS;
case EfiPciIoAttributeOperationSupported:
if (Result == NULL) {
return EFI_INVALID_PARAMETER;
}
*Result = PciIoDevice->Supports;
return EFI_SUCCESS;
case EfiPciIoAttributeOperationSet:
Status = PciIoDevice->PciIo.Attributes (
&(PciIoDevice->PciIo),
EfiPciIoAttributeOperationEnable,
Attributes,
NULL
);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
Status = PciIoDevice->PciIo.Attributes (
&(PciIoDevice->PciIo),
EfiPciIoAttributeOperationDisable,
(~Attributes) & (PciIoDevice->Supports),
NULL
);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
return EFI_SUCCESS;
case EfiPciIoAttributeOperationEnable:
case EfiPciIoAttributeOperationDisable:
break;
default:
return EFI_INVALID_PARAMETER;
}
//
// Just a trick for ENABLE attribute
// EFI_PCI_DEVICE_ENABLE is not defined in UEFI spec, which is the internal usage.
// So, this logic doesn't conform to UEFI spec, which should be removed.
// But this trick logic is still kept for some binary drivers that depend on it.
//
if ((Attributes & EFI_PCI_DEVICE_ENABLE) == EFI_PCI_DEVICE_ENABLE) {
Attributes &= (PciIoDevice->Supports);
//
// Raise the EFI_P_PC_ENABLE Status code
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_IO_BUS_PCI | EFI_P_PC_ENABLE,
PciIoDevice->DevicePath
);
}
//
// Check VGA and VGA16, they can not be set at the same time
//
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_IO | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO)) != 0) {
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) != 0) {
return EFI_UNSUPPORTED;
}
}
//
// If no attributes can be supported, then return.
// Otherwise, set the attributes that it can support.
//
Supports = (PciIoDevice->Supports) & Attributes;
if (Supports != Attributes) {
return EFI_UNSUPPORTED;
}
//
// For Root Bridge, just call RootBridgeIo to set attributes;
//
if (PciIoDevice->Parent == NULL) {
Status = ModifyRootBridgeAttributes (PciIoDevice, Attributes, Operation);
return Status;
}
Command = 0;
BridgeControl = 0;
//
// For PPB & P2C, set relevant attribute bits
//
if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_IO | EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) != 0) {
BridgeControl |= EFI_PCI_BRIDGE_CONTROL_VGA;
}
if ((Attributes & EFI_PCI_IO_ATTRIBUTE_ISA_IO) != 0) {
BridgeControl |= EFI_PCI_BRIDGE_CONTROL_ISA;
}
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) != 0) {
Command |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;
}
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 | EFI_PCI_IO_ATTRIBUTE_VGA_IO_16)) != 0) {
BridgeControl |= EFI_PCI_BRIDGE_CONTROL_VGA_16;
}
} else {
//
// Do with the attributes on VGA
// Only for VGA's legacy resource, we just can enable once.
//
if ((Attributes &
(EFI_PCI_IO_ATTRIBUTE_VGA_IO |
EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 |
EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY)) != 0) {
//
// Check if a VGA has been enabled before enabling a new one
//
if (Operation == EfiPciIoAttributeOperationEnable) {
//
// Check if there have been an active VGA device on the same Host Bridge
//
Temp = LocateVgaDeviceOnHostBridge (PciIoDevice->PciRootBridgeIo->ParentHandle);
if (Temp != NULL && Temp != PciIoDevice) {
//
// An active VGA has been detected, so can not enable another
//
return EFI_UNSUPPORTED;
}
}
}
//
// Do with the attributes on GFX
//
if ((Attributes & (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16)) != 0) {
if (Operation == EfiPciIoAttributeOperationEnable) {
//
// Check if snoop can be enabled in current configuration
//
Status = SupportPaletteSnoopAttributes (PciIoDevice, Operation);
if (EFI_ERROR(Status)) {
//
// Enable operation is forbidden, so mask the bit in attributes
// so as to keep consistent with the actual Status
//
// Attributes &= (~EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO);
//
//
//
return EFI_UNSUPPORTED;
}
}
//
// It can be supported, so get ready to set the bit
//
Command |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP;
}
}
if ((Attributes & EFI_PCI_IO_ATTRIBUTE_IO) != 0) {
Command |= EFI_PCI_COMMAND_IO_SPACE;
}
if ((Attributes & EFI_PCI_IO_ATTRIBUTE_MEMORY) != 0) {
Command |= EFI_PCI_COMMAND_MEMORY_SPACE;
}
if ((Attributes & EFI_PCI_IO_ATTRIBUTE_BUS_MASTER) != 0) {
Command |= EFI_PCI_COMMAND_BUS_MASTER;
}
//
// The upstream bridge should be also set to relevant attribute
// expect for IO, Mem and BusMaster
//
UpStreamAttributes = Attributes &
(~(EFI_PCI_IO_ATTRIBUTE_IO |
EFI_PCI_IO_ATTRIBUTE_MEMORY |
EFI_PCI_IO_ATTRIBUTE_BUS_MASTER
)
);
UpStreamBridge = PciIoDevice->Parent;
if (Operation == EfiPciIoAttributeOperationEnable) {
//
// Enable relevant attributes to command register and bridge control register
//
Status = PCI_ENABLE_COMMAND_REGISTER (PciIoDevice, Command);
if (BridgeControl != 0) {
Status = PCI_ENABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, BridgeControl);
}
PciIoDevice->Attributes |= Attributes;
//
// Enable attributes of the upstream bridge
//
Status = UpStreamBridge->PciIo.Attributes (
&(UpStreamBridge->PciIo),
EfiPciIoAttributeOperationEnable,
UpStreamAttributes,
NULL
);
} else {
//
// Disable relevant attributes to command register and bridge control register
//
Status = PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, Command);
if (BridgeControl != 0) {
Status = PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, BridgeControl);
}
PciIoDevice->Attributes &= (~Attributes);
Status = EFI_SUCCESS;
}
if (EFI_ERROR(Status)) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR,
PciIoDevice->DevicePath
);
}
return Status;
}
/**
Retrieve the AddrTranslationOffset from RootBridgeIo for the
specified range.
@param RootBridgeIo Root Bridge IO instance.
@param AddrRangeMin The base address of the MMIO.
@param AddrLen The length of the MMIO.
@retval The AddrTranslationOffset from RootBridgeIo for the
specified range, or (UINT64) -1 if the range is not
found in RootBridgeIo.
**/
UINT64
GetMmioAddressTranslationOffset (
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *RootBridgeIo,
UINT64 AddrRangeMin,
UINT64 AddrLen
)
{
EFI_STATUS Status;
EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Configuration;
Status = RootBridgeIo->Configuration (
RootBridgeIo,
(VOID **) &Configuration
);
if (EFI_ERROR(Status)) {
return (UINT64) -1;
}
// According to UEFI 2.7, EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL::Configuration()
// returns host address instead of device address, while AddrTranslationOffset
// is not zero, and device address = host address + AddrTranslationOffset, so
// we convert host address to device address for range compare.
while (Configuration->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR) {
if ((Configuration->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) &&
(Configuration->AddrRangeMin + Configuration->AddrTranslationOffset <= AddrRangeMin) &&
(Configuration->AddrRangeMin + Configuration->AddrLen + Configuration->AddrTranslationOffset >= AddrRangeMin + AddrLen)
) {
return Configuration->AddrTranslationOffset;
}
Configuration++;
}
//
// The resource occupied by BAR should be in the range reported by RootBridge.
//
ASSERT (FALSE);
return (UINT64) -1;
}
/**
Gets the attributes that this PCI controller supports setting on a BAR using
SetBarAttributes(), and retrieves the list of resource descriptors for a BAR.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for resource range. The legal range for this field is 0..5.
@param Supports A pointer to the mask of attributes that this PCI controller supports
setting for this BAR with SetBarAttributes().
@param Resources A pointer to the resource descriptors that describe the current
configuration of this BAR of the PCI controller.
@retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI
controller supports are returned in Supports. If Resources
is not NULL, then the resource descriptors that the PCI
controller is currently using are returned in Resources.
@retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_OUT_OF_RESOURCES There are not enough resources available to allocate
Resources.
**/
EFI_STATUS
EFIAPI
PciIoGetBarAttributes (
IN EFI_PCI_IO_PROTOCOL * This,
IN UINT8 BarIndex,
OUT UINT64 *Supports, OPTIONAL
OUT VOID **Resources OPTIONAL
)
{
PCI_IO_DEVICE *PciIoDevice;
EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;
EFI_ACPI_END_TAG_DESCRIPTOR *End;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
if (Supports == NULL && Resources == NULL) {
return EFI_INVALID_PARAMETER;
}
if ((BarIndex >= PCI_MAX_BAR) || (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeUnknown)) {
return EFI_UNSUPPORTED;
}
//
// This driver does not support modifications to the WRITE_COMBINE or
// CACHED attributes for BAR ranges.
//
if (Supports != NULL) {
*Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE;
}
if (Resources != NULL) {
Descriptor = AllocateZeroPool(sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR));
if (Descriptor == NULL) {
return EFI_OUT_OF_RESOURCES;
}
*Resources = Descriptor;
Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
Descriptor->Len = (UINT16) (sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3);
Descriptor->AddrRangeMin = PciIoDevice->PciBar[BarIndex].BaseAddress;
Descriptor->AddrLen = PciIoDevice->PciBar[BarIndex].Length;
Descriptor->AddrRangeMax = PciIoDevice->PciBar[BarIndex].Alignment;
switch (PciIoDevice->PciBar[BarIndex].BarType) {
case PciBarTypeIo16:
case PciBarTypeIo32:
//
// Io
//
Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO;
break;
case PciBarTypePMem32:
//
// prefetchable
//
Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
//
// Fall through
//
case PciBarTypeMem32:
//
// Mem
//
Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
//
// 32 bit
//
Descriptor->AddrSpaceGranularity = 32;
break;
case PciBarTypePMem64:
//
// prefetchable
//
Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
//
// Fall through
//
case PciBarTypeMem64:
//
// Mem
//
Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
//
// 64 bit
//
Descriptor->AddrSpaceGranularity = 64;
break;
default:
break;
}
//
// put the checksum
//
End = (EFI_ACPI_END_TAG_DESCRIPTOR *) (Descriptor + 1);
End->Desc = ACPI_END_TAG_DESCRIPTOR;
End->Checksum = 0;
//
// Get the Address Translation Offset
//
if (Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {
Descriptor->AddrTranslationOffset = GetMmioAddressTranslationOffset (
PciIoDevice->PciRootBridgeIo,
Descriptor->AddrRangeMin,
Descriptor->AddrLen
);
if (Descriptor->AddrTranslationOffset == (UINT64) -1) {
FreePool(Descriptor);
return EFI_UNSUPPORTED;
}
}
// According to UEFI spec 2.7, we need return host address for
// PciIo->GetBarAttributes, and host address = device address - translation.
Descriptor->AddrRangeMin -= Descriptor->AddrTranslationOffset;
}
return EFI_SUCCESS;
}
/**
Sets the attributes for a range of a BAR on a PCI controller.
@param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param Attributes The mask of attributes to set for the resource range specified by
BarIndex, Offset, and Length.
@param BarIndex The BAR index of the standard PCI Configuration header to use as the
base address for resource range. The legal range for this field is 0..5.
@param Offset A pointer to the BAR relative base address of the resource range to be
modified by the attributes specified by Attributes.
@param Length A pointer to the length of the resource range to be modified by the
attributes specified by Attributes.
@retval EFI_SUCCESS The set of attributes specified by Attributes for the resource
range specified by BarIndex, Offset, and Length were
set on the PCI controller, and the actual resource range is returned
in Offset and Length.
@retval EFI_INVALID_PARAMETER Offset or Length is NULL.
@retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to set the attributes on the
resource range specified by BarIndex, Offset, and
Length.
**/
EFI_STATUS
EFIAPI
PciIoSetBarAttributes (
IN EFI_PCI_IO_PROTOCOL *This,
IN UINT64 Attributes,
IN UINT8 BarIndex,
IN OUT UINT64 *Offset,
IN OUT UINT64 *Length
)
{
EFI_STATUS Status;
PCI_IO_DEVICE *PciIoDevice;
UINT64 NonRelativeOffset;
UINT64 Supports;
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This);
//
// Make sure Offset and Length are not NULL
//
if (Offset == NULL || Length == NULL) {
return EFI_INVALID_PARAMETER;
}
if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeUnknown) {
return EFI_UNSUPPORTED;
}
//
// This driver does not support setting the WRITE_COMBINE or the CACHED attributes.
// If Attributes is not 0, then return EFI_UNSUPPORTED.
//
Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE;
if (Attributes != (Attributes & Supports)) {
return EFI_UNSUPPORTED;
}
//
// Attributes must be supported. Make sure the BAR range described by BarIndex, Offset, and
// Length are valid for this PCI device.
//
NonRelativeOffset = *Offset;
Status = PciIoVerifyBarAccess (
PciIoDevice,
BarIndex,
PciBarTypeMem,
EfiPciIoWidthUint8,
(UINT32) *Length,
&NonRelativeOffset
);
if (EFI_ERROR(Status)) {
return EFI_UNSUPPORTED;
}
return EFI_SUCCESS;
}
/**
Test whether two Pci devices has same parent bridge.
@param PciDevice1 The first pci device for testing.
@param PciDevice2 The second pci device for testing.
@retval TRUE Two Pci device has the same parent bridge.
@retval FALSE Two Pci device has not the same parent bridge.
**/
BOOLEAN
PciDevicesOnTheSamePath (
IN PCI_IO_DEVICE *PciDevice1,
IN PCI_IO_DEVICE *PciDevice2
)
{
BOOLEAN Existed1;
BOOLEAN Existed2;
if (PciDevice1->Parent == PciDevice2->Parent) {
return TRUE;
}
Existed1 = PciDeviceExisted (PciDevice1->Parent, PciDevice2);
Existed2 = PciDeviceExisted (PciDevice2->Parent, PciDevice1);
return (BOOLEAN) (Existed1 || Existed2);
}