mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-11-27 12:15:19 +01:00
518 lines
15 KiB
C
518 lines
15 KiB
C
/** @file
|
|
Platform TPM Profile Specification definition for TPM2.0.
|
|
It covers both FIFO and CRB interface.
|
|
|
|
Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
|
|
SPDX-License-Identifier: BSD-2-Clause-Patent
|
|
|
|
**/
|
|
|
|
#ifndef _TPM_PTP_H_
|
|
#define _TPM_PTP_H_
|
|
|
|
//
|
|
// PTP FIFO definition
|
|
//
|
|
|
|
//
|
|
// Set structure alignment to 1-byte
|
|
//
|
|
#pragma pack (1)
|
|
|
|
//
|
|
// Register set map as specified in PTP specification Chapter 5
|
|
//
|
|
typedef struct {
|
|
///
|
|
/// Used to gain ownership for this particular port.
|
|
///
|
|
UINT8 Access; // 0
|
|
UINT8 Reserved1[7]; // 1
|
|
///
|
|
/// Controls interrupts.
|
|
///
|
|
UINT32 IntEnable; // 8
|
|
///
|
|
/// SIRQ vector to be used by the TPM.
|
|
///
|
|
UINT8 IntVector; // 0ch
|
|
UINT8 Reserved2[3]; // 0dh
|
|
///
|
|
/// What caused interrupt.
|
|
///
|
|
UINT32 IntSts; // 10h
|
|
///
|
|
/// Shows which interrupts are supported by that particular TPM.
|
|
///
|
|
UINT32 InterfaceCapability;// 14h
|
|
///
|
|
/// Status Register. Provides status of the TPM.
|
|
///
|
|
UINT8 Status; // 18h
|
|
///
|
|
/// Number of consecutive writes that can be done to the TPM.
|
|
///
|
|
UINT16 BurstCount; // 19h
|
|
///
|
|
/// Additional Status Register.
|
|
///
|
|
UINT8 StatusEx; // 1Bh
|
|
UINT8 Reserved3[8];
|
|
///
|
|
/// Read or write FIFO, depending on transaction.
|
|
///
|
|
UINT32 DataFifo; // 24h
|
|
UINT8 Reserved4[8]; // 28h
|
|
///
|
|
/// Used to identify the Interface types supported by the TPM.
|
|
///
|
|
UINT32 InterfaceId; // 30h
|
|
UINT8 Reserved5[0x4c]; // 34h
|
|
///
|
|
/// Extended ReadFIFO or WriteFIFO, depending on the current bus cycle (read or write)
|
|
///
|
|
UINT32 XDataFifo; // 80h
|
|
UINT8 Reserved6[0xe7c]; // 84h
|
|
///
|
|
/// Vendor ID
|
|
///
|
|
UINT16 Vid; // 0f00h
|
|
///
|
|
/// Device ID
|
|
///
|
|
UINT16 Did; // 0f02h
|
|
///
|
|
/// Revision ID
|
|
///
|
|
UINT8 Rid; // 0f04h
|
|
UINT8 Reserved[0xfb]; // 0f05h
|
|
} PTP_FIFO_REGISTERS;
|
|
|
|
//
|
|
// Restore original structure alignment
|
|
//
|
|
#pragma pack ()
|
|
|
|
//
|
|
// Define pointer types used to access TIS registers on PC
|
|
//
|
|
typedef PTP_FIFO_REGISTERS *PTP_FIFO_REGISTERS_PTR;
|
|
|
|
//
|
|
// Define bits of FIFO Interface Identifier Register
|
|
//
|
|
typedef union {
|
|
struct {
|
|
UINT32 InterfaceType:4;
|
|
UINT32 InterfaceVersion:4;
|
|
UINT32 CapLocality:1;
|
|
UINT32 Reserved1:2;
|
|
UINT32 CapDataXferSizeSupport:2;
|
|
UINT32 CapFIFO:1;
|
|
UINT32 CapCRB:1;
|
|
UINT32 CapIFRes:2;
|
|
UINT32 InterfaceSelector:2;
|
|
UINT32 IntfSelLock:1;
|
|
UINT32 Reserved2:4;
|
|
UINT32 Reserved3:8;
|
|
} Bits;
|
|
UINT32 Uint32;
|
|
} PTP_FIFO_INTERFACE_IDENTIFIER;
|
|
|
|
//
|
|
// Define bits of FIFO Interface Capability Register
|
|
//
|
|
typedef union {
|
|
struct {
|
|
UINT32 DataAvailIntSupport:1;
|
|
UINT32 StsValidIntSupport:1;
|
|
UINT32 LocalityChangeIntSupport:1;
|
|
UINT32 InterruptLevelHigh:1;
|
|
UINT32 InterruptLevelLow:1;
|
|
UINT32 InterruptEdgeRising:1;
|
|
UINT32 InterruptEdgeFalling:1;
|
|
UINT32 CommandReadyIntSupport:1;
|
|
UINT32 BurstCountStatic:1;
|
|
UINT32 DataTransferSizeSupport:2;
|
|
UINT32 Reserved:17;
|
|
UINT32 InterfaceVersion:3;
|
|
UINT32 Reserved2:1;
|
|
} Bits;
|
|
UINT32 Uint32;
|
|
} PTP_FIFO_INTERFACE_CAPABILITY;
|
|
|
|
///
|
|
/// InterfaceVersion
|
|
///
|
|
#define INTERFACE_CAPABILITY_INTERFACE_VERSION_TIS_12 0x0
|
|
#define INTERFACE_CAPABILITY_INTERFACE_VERSION_TIS_13 0x2
|
|
#define INTERFACE_CAPABILITY_INTERFACE_VERSION_PTP 0x3
|
|
|
|
|
|
//
|
|
// Define bits of ACCESS and STATUS registers
|
|
//
|
|
|
|
///
|
|
/// This bit is a 1 to indicate that the other bits in this register are valid.
|
|
///
|
|
#define PTP_FIFO_VALID BIT7
|
|
///
|
|
/// Indicate that this locality is active.
|
|
///
|
|
#define PTP_FIFO_ACC_ACTIVE BIT5
|
|
///
|
|
/// Set to 1 to indicate that this locality had the TPM taken away while
|
|
/// this locality had the TIS_PC_ACC_ACTIVE bit set.
|
|
///
|
|
#define PTP_FIFO_ACC_SEIZED BIT4
|
|
///
|
|
/// Set to 1 to indicate that TPM MUST reset the
|
|
/// TIS_PC_ACC_ACTIVE bit and remove ownership for localities less than the
|
|
/// locality that is writing this bit.
|
|
///
|
|
#define PTP_FIFO_ACC_SEIZE BIT3
|
|
///
|
|
/// When this bit is 1, another locality is requesting usage of the TPM.
|
|
///
|
|
#define PTP_FIFO_ACC_PENDIND BIT2
|
|
///
|
|
/// Set to 1 to indicate that this locality is requesting to use TPM.
|
|
///
|
|
#define PTP_FIFO_ACC_RQUUSE BIT1
|
|
///
|
|
/// A value of 1 indicates that a T/OS has not been established on the platform
|
|
///
|
|
#define PTP_FIFO_ACC_ESTABLISH BIT0
|
|
|
|
///
|
|
/// This field indicates that STS_DATA and STS_EXPECT are valid
|
|
///
|
|
#define PTP_FIFO_STS_VALID BIT7
|
|
///
|
|
/// When this bit is 1, TPM is in the Ready state,
|
|
/// indicating it is ready to receive a new command.
|
|
///
|
|
#define PTP_FIFO_STS_READY BIT6
|
|
///
|
|
/// Write a 1 to this bit to cause the TPM to execute that command.
|
|
///
|
|
#define PTP_FIFO_STS_GO BIT5
|
|
///
|
|
/// This bit indicates that the TPM has data available as a response.
|
|
///
|
|
#define PTP_FIFO_STS_DATA BIT4
|
|
///
|
|
/// The TPM sets this bit to a value of 1 when it expects another byte of data for a command.
|
|
///
|
|
#define PTP_FIFO_STS_EXPECT BIT3
|
|
///
|
|
/// Indicates that the TPM has completed all self-test actions following a TPM_ContinueSelfTest command.
|
|
///
|
|
#define PTP_FIFO_STS_SELFTEST_DONE BIT2
|
|
///
|
|
/// Writes a 1 to this bit to force the TPM to re-send the response.
|
|
///
|
|
#define PTP_FIFO_STS_RETRY BIT1
|
|
|
|
///
|
|
/// TPM Family Identifier.
|
|
/// 00: TPM 1.2 Family
|
|
/// 01: TPM 2.0 Family
|
|
///
|
|
#define PTP_FIFO_STS_EX_TPM_FAMILY (BIT2 | BIT3)
|
|
#define PTP_FIFO_STS_EX_TPM_FAMILY_OFFSET (2)
|
|
#define PTP_FIFO_STS_EX_TPM_FAMILY_TPM12 (0)
|
|
#define PTP_FIFO_STS_EX_TPM_FAMILY_TPM20 (BIT2)
|
|
///
|
|
/// A write of 1 after tpmGo and before dataAvail aborts the currently executing command, resulting in a response of TPM_RC_CANCELLED.
|
|
/// A write of 1 after dataAvail and before tpmGo is ignored by the TPM.
|
|
///
|
|
#define PTP_FIFO_STS_EX_CANCEL BIT0
|
|
|
|
|
|
//
|
|
// PTP CRB definition
|
|
//
|
|
|
|
//
|
|
// Set structure alignment to 1-byte
|
|
//
|
|
#pragma pack (1)
|
|
|
|
//
|
|
// Register set map as specified in PTP specification Chapter 5
|
|
//
|
|
typedef struct {
|
|
///
|
|
/// Used to determine current state of Locality of the TPM.
|
|
///
|
|
UINT32 LocalityState; // 0
|
|
UINT8 Reserved1[4]; // 4
|
|
///
|
|
/// Used to gain control of the TPM by this Locality.
|
|
///
|
|
UINT32 LocalityControl; // 8
|
|
///
|
|
/// Used to determine whether Locality has been granted or Seized.
|
|
///
|
|
UINT32 LocalityStatus; // 0ch
|
|
UINT8 Reserved2[0x20]; // 10h
|
|
///
|
|
/// Used to identify the Interface types supported by the TPM.
|
|
///
|
|
UINT32 InterfaceId; // 30h
|
|
///
|
|
/// Vendor ID
|
|
///
|
|
UINT16 Vid; // 34h
|
|
///
|
|
/// Device ID
|
|
///
|
|
UINT16 Did; // 36h
|
|
///
|
|
/// Optional Register used in low memory environments prior to CRB_DATA_BUFFER availability.
|
|
///
|
|
UINT64 CrbControlExtension; // 38h
|
|
///
|
|
/// Register used to initiate transactions for the CRB interface.
|
|
///
|
|
UINT32 CrbControlRequest; // 40h
|
|
///
|
|
/// Register used by the TPM to provide status of the CRB interface.
|
|
///
|
|
UINT32 CrbControlStatus; // 44h
|
|
///
|
|
/// Register used by software to cancel command processing.
|
|
///
|
|
UINT32 CrbControlCancel; // 48h
|
|
///
|
|
/// Register used to indicate presence of command or response data in the CRB buffer.
|
|
///
|
|
UINT32 CrbControlStart; // 4Ch
|
|
///
|
|
/// Register used to configure and respond to interrupts.
|
|
///
|
|
UINT32 CrbInterruptEnable; // 50h
|
|
UINT32 CrbInterruptStatus; // 54h
|
|
///
|
|
/// Size of the Command buffer.
|
|
///
|
|
UINT32 CrbControlCommandSize; // 58h
|
|
///
|
|
/// Command buffer start address
|
|
///
|
|
UINT32 CrbControlCommandAddressLow; // 5Ch
|
|
UINT32 CrbControlCommandAddressHigh; // 60h
|
|
///
|
|
/// Size of the Response buffer
|
|
///
|
|
UINT32 CrbControlResponseSize; // 64h
|
|
///
|
|
/// Address of the start of the Response buffer
|
|
///
|
|
UINT64 CrbControlResponseAddrss; // 68h
|
|
UINT8 Reserved4[0x10]; // 70h
|
|
///
|
|
/// Command/Response Data may be defined as large as 3968 (0xF80).
|
|
///
|
|
UINT8 CrbDataBuffer[0xF80]; // 80h
|
|
} PTP_CRB_REGISTERS;
|
|
|
|
//
|
|
// Define pointer types used to access CRB registers on PTP
|
|
//
|
|
typedef PTP_CRB_REGISTERS *PTP_CRB_REGISTERS_PTR;
|
|
|
|
//
|
|
// Define bits of CRB Interface Identifier Register
|
|
//
|
|
typedef union {
|
|
struct {
|
|
UINT32 InterfaceType:4;
|
|
UINT32 InterfaceVersion:4;
|
|
UINT32 CapLocality:1;
|
|
UINT32 CapCRBIdleBypass:1;
|
|
UINT32 Reserved1:1;
|
|
UINT32 CapDataXferSizeSupport:2;
|
|
UINT32 CapFIFO:1;
|
|
UINT32 CapCRB:1;
|
|
UINT32 CapIFRes:2;
|
|
UINT32 InterfaceSelector:2;
|
|
UINT32 IntfSelLock:1;
|
|
UINT32 Reserved2:4;
|
|
UINT32 Rid:8;
|
|
} Bits;
|
|
UINT32 Uint32;
|
|
} PTP_CRB_INTERFACE_IDENTIFIER;
|
|
|
|
///
|
|
/// InterfaceType
|
|
///
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_FIFO 0x0
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_CRB 0x1
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_TIS 0xF
|
|
|
|
///
|
|
/// InterfaceVersion
|
|
///
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_FIFO 0x0
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_CRB 0x1
|
|
|
|
///
|
|
/// InterfaceSelector
|
|
///
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_SELECTOR_FIFO 0x0
|
|
#define PTP_INTERFACE_IDENTIFIER_INTERFACE_SELECTOR_CRB 0x1
|
|
|
|
//
|
|
// Define bits of Locality State Register
|
|
//
|
|
|
|
///
|
|
/// This bit indicates whether all other bits of this register contain valid values, if it is a 1.
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATE_TPM_REG_VALID_STATUS BIT7
|
|
|
|
///
|
|
/// 000 - Locality 0
|
|
/// 001 - Locality 1
|
|
/// 010 - Locality 2
|
|
/// 011 - Locality 3
|
|
/// 100 - Locality 4
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_MASK (BIT2 | BIT3 | BIT4)
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_0 (0)
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_1 (BIT2)
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_2 (BIT3)
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_3 (BIT2 | BIT3)
|
|
#define PTP_CRB_LOCALITY_STATE_ACTIVE_LOCALITY_4 (BIT4)
|
|
|
|
///
|
|
/// A 0 indicates to the host that no locality is assigned.
|
|
/// A 1 indicates a locality has been assigned.
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATE_LOCALITY_ASSIGNED BIT1
|
|
|
|
///
|
|
/// The TPM clears this bit to 0 upon receipt of _TPM_Hash_End
|
|
/// The TPM sets this bit to a 1 when the TPM_LOC_CTRL_x.resetEstablishment field is set to 1.
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATE_TPM_ESTABLISHED BIT0
|
|
|
|
//
|
|
// Define bits of Locality Control Register
|
|
//
|
|
|
|
///
|
|
/// Writes (1): Reset TPM_LOC_STATE_x.tpmEstablished bit if the write occurs from Locality 3 or 4.
|
|
///
|
|
#define PTP_CRB_LOCALITY_CONTROL_RESET_ESTABLISHMENT_BIT BIT3
|
|
|
|
///
|
|
/// Writes (1): The TPM gives control of the TPM to the locality setting this bit if it is the higher priority locality.
|
|
///
|
|
#define PTP_CRB_LOCALITY_CONTROL_SEIZE BIT2
|
|
|
|
///
|
|
/// Writes (1): The active Locality is done with the TPM.
|
|
///
|
|
#define PTP_CRB_LOCALITY_CONTROL_RELINQUISH BIT1
|
|
|
|
///
|
|
/// Writes (1): Interrupt the TPM and generate a locality arbitration algorithm.
|
|
///
|
|
#define PTP_CRB_LOCALITY_CONTROL_REQUEST_ACCESS BIT0
|
|
|
|
//
|
|
// Define bits of Locality Status Register
|
|
//
|
|
|
|
///
|
|
/// 0: A higher locality has not initiated a Seize arbitration process.
|
|
/// 1: A higher locality has Seized the TPM from this locality.
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATUS_BEEN_SEIZED BIT1
|
|
|
|
///
|
|
/// 0: Locality has not been granted to the TPM.
|
|
/// 1: Locality has been granted access to the TPM
|
|
///
|
|
#define PTP_CRB_LOCALITY_STATUS_GRANTED BIT0
|
|
|
|
//
|
|
// Define bits of CRB Control Area Request Register
|
|
//
|
|
|
|
///
|
|
/// Used by Software to indicate transition the TPM to and from the Idle state
|
|
/// 1: Set by Software to indicate response has been read from the response buffer and TPM can transition to Idle
|
|
/// 0: Cleared to 0 by TPM to acknowledge the request when TPM enters Idle state.
|
|
/// TPM SHALL complete this transition within TIMEOUT_C.
|
|
///
|
|
#define PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE BIT1
|
|
|
|
///
|
|
/// Used by Software to request the TPM transition to the Ready State.
|
|
/// 1: Set to 1 by Software to indicate the TPM should be ready to receive a command.
|
|
/// 0: Cleared to 0 by TPM to acknowledge the request.
|
|
/// TPM SHALL complete this transition within TIMEOUT_C.
|
|
///
|
|
#define PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY BIT0
|
|
|
|
//
|
|
// Define bits of CRB Control Area Status Register
|
|
//
|
|
|
|
///
|
|
/// Used by TPM to indicate it is in the Idle State
|
|
/// 1: Set by TPM when in the Idle State
|
|
/// 0: Cleared by TPM on receipt of TPM_CRB_CTRL_REQ_x.cmdReady when TPM transitions to the Ready State.
|
|
/// SHALL be cleared by TIMEOUT_C.
|
|
///
|
|
#define PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE BIT1
|
|
|
|
///
|
|
/// Used by the TPM to indicate current status.
|
|
/// 1: Set by TPM to indicate a FATAL Error
|
|
/// 0: Indicates TPM is operational
|
|
///
|
|
#define PTP_CRB_CONTROL_AREA_STATUS_TPM_STATUS BIT0
|
|
|
|
//
|
|
// Define bits of CRB Control Cancel Register
|
|
//
|
|
|
|
///
|
|
/// Used by software to cancel command processing Reads return correct value
|
|
/// Writes (0000 0001h): Cancel a command
|
|
/// Writes (0000 0000h): Clears field when command has been cancelled
|
|
///
|
|
#define PTP_CRB_CONTROL_CANCEL BIT0
|
|
|
|
//
|
|
// Define bits of CRB Control Start Register
|
|
//
|
|
|
|
///
|
|
/// When set by software, indicates a command is ready for processing.
|
|
/// Writes (0000 0001h): TPM transitions to Command Execution
|
|
/// Writes (0000 0000h): TPM clears this field and transitions to Command Completion
|
|
///
|
|
#define PTP_CRB_CONTROL_START BIT0
|
|
|
|
//
|
|
// Restore original structure alignment
|
|
//
|
|
#pragma pack ()
|
|
|
|
//
|
|
// Default TimeOut value
|
|
//
|
|
#define PTP_TIMEOUT_A (750 * 1000) // 750ms
|
|
#define PTP_TIMEOUT_B (2000 * 1000) // 2s
|
|
#define PTP_TIMEOUT_C (200 * 1000) // 200ms
|
|
#define PTP_TIMEOUT_D (30 * 1000) // 30ms
|
|
|
|
#endif
|