mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-12-28 17:08:18 +01:00
01f33f7552
stylish change: remove space between func and brace Signed-off-by: SergeySlice <sergey.slice@gmail.com>
1381 lines
45 KiB
C
1381 lines
45 KiB
C
/** @file
|
|
This file provides some helper functions which are specific for EMMC device.
|
|
|
|
Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
|
|
Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
|
|
SPDX-License-Identifier: BSD-2-Clause-Patent
|
|
|
|
**/
|
|
|
|
#include "SdMmcPciHcDxe.h"
|
|
|
|
/**
|
|
Send command GO_IDLE_STATE (CMD0 with argument of 0x00000000) to the device to
|
|
make it go to Idle State.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
|
|
@retval EFI_SUCCESS The EMMC device is reset correctly.
|
|
@retval Others The device reset fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcReset (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_GO_IDLE_STATE;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeBc;
|
|
SdMmcCmdBlk.ResponseType = 0;
|
|
SdMmcCmdBlk.CommandArgument = 0;
|
|
|
|
gBS->Stall (1000);
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SEND_OP_COND to the EMMC device to get the data of the OCR register.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in, out] Argument On input, the argument of SEND_OP_COND is to send to the device.
|
|
On output, the argument is the value of OCR register.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcGetOcr (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN OUT UINT32 *Argument
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SEND_OP_COND;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR3;
|
|
SdMmcCmdBlk.CommandArgument = *Argument;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
if (!EFI_ERROR(Status)) {
|
|
//
|
|
// For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
|
|
//
|
|
*Argument = SdMmcStatusBlk.Resp0;
|
|
}
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Broadcast command ALL_SEND_CID to the bus to ask all the EMMC devices to send the
|
|
data of their CID registers.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcGetAllCid (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_ALL_SEND_CID;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
|
|
SdMmcCmdBlk.CommandArgument = 0;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SET_RELATIVE_ADDR to the EMMC device to assign a Relative device
|
|
Address (RCA).
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSetRca (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SET_RELATIVE_ADDR;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
|
|
SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SEND_CSD to the EMMC device to get the data of the CSD register.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address of selected device.
|
|
@param[out] Csd The buffer to store the content of the CSD register.
|
|
Note the caller should ignore the lowest byte of this
|
|
buffer as the content of this byte is meaningless even
|
|
if the operation succeeds.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcGetCsd (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
OUT EMMC_CSD *Csd
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SEND_CSD;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
|
|
SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
if (!EFI_ERROR(Status)) {
|
|
//
|
|
// For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
|
|
//
|
|
CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (EMMC_CSD) - 1);
|
|
}
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SELECT_DESELECT_CARD to the EMMC device to select/deselect it.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address of selected device.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSelect (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SELECT_DESELECT_CARD;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
|
|
SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SEND_EXT_CSD to the EMMC device to get the data of the EXT_CSD register.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[out] ExtCsd The buffer to store the content of the EXT_CSD register.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcGetExtCsd (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
OUT EMMC_EXT_CSD *ExtCsd
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SEND_EXT_CSD;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
|
|
SdMmcCmdBlk.CommandArgument = 0x00000000;
|
|
|
|
Packet.InDataBuffer = ExtCsd;
|
|
Packet.InTransferLength = sizeof (EMMC_EXT_CSD);
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SWITCH to the EMMC device to switch the mode of operation of the
|
|
selected Device or modifies the EXT_CSD registers.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Access The access mode of SWTICH command.
|
|
@param[in] Index The offset of the field to be access.
|
|
@param[in] Value The value to be set to the specified field of EXT_CSD register.
|
|
@param[in] CmdSet The value of CmdSet field of EXT_CSD register.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitch (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT8 Access,
|
|
IN UINT8 Index,
|
|
IN UINT8 Value,
|
|
IN UINT8 CmdSet
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SWITCH;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
|
|
SdMmcCmdBlk.CommandArgument = (Access << 24) | (Index << 16) | (Value << 8) | CmdSet;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SEND_STATUS to the addressed EMMC device to get its status register.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address of addressed device.
|
|
@param[out] DevStatus The returned device status.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSendStatus (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
OUT UINT32 *DevStatus
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SEND_STATUS;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
|
|
SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
if (!EFI_ERROR(Status)) {
|
|
*DevStatus = SdMmcStatusBlk.Resp0;
|
|
}
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Send command SEND_TUNING_BLOCK to the EMMC device for HS200 optimal sampling point
|
|
detection.
|
|
|
|
It may be sent up to 40 times until the host finishes the tuning procedure.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 for details.
|
|
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] BusWidth The bus width to work.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSendTuningBlk (
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT8 BusWidth
|
|
)
|
|
{
|
|
EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
|
|
EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
|
|
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
|
|
EFI_STATUS Status;
|
|
UINT8 TuningBlock[128];
|
|
|
|
ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
|
|
ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
|
|
ZeroMem (&Packet, sizeof (Packet));
|
|
|
|
Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
|
|
Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
|
|
Packet.Timeout = SD_MMC_HC_GENERIC_TIMEOUT;
|
|
|
|
SdMmcCmdBlk.CommandIndex = EMMC_SEND_TUNING_BLOCK;
|
|
SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
|
|
SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
|
|
SdMmcCmdBlk.CommandArgument = 0;
|
|
|
|
Packet.InDataBuffer = TuningBlock;
|
|
if (BusWidth == 8) {
|
|
Packet.InTransferLength = sizeof (TuningBlock);
|
|
} else {
|
|
Packet.InTransferLength = 64;
|
|
}
|
|
|
|
Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Tunning the clock to get HS200 optimal sampling point.
|
|
|
|
Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
|
|
tuning procedure.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 2-29 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] BusWidth The bus width to work.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcTuningClkForHs200 (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT8 BusWidth
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
UINT8 HostCtrl2;
|
|
UINT8 Retry;
|
|
|
|
//
|
|
// Notify the host that the sampling clock tuning procedure starts.
|
|
//
|
|
HostCtrl2 = BIT6;
|
|
Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
//
|
|
// Ask the device to send a sequence of tuning blocks till the tuning procedure is done.
|
|
//
|
|
Retry = 0;
|
|
do {
|
|
Status = EmmcSendTuningBlk (PassThru, Slot, BusWidth);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
|
|
Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, TRUE, sizeof (HostCtrl2), &HostCtrl2);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
if ((HostCtrl2 & (BIT6 | BIT7)) == 0) {
|
|
break;
|
|
}
|
|
|
|
if ((HostCtrl2 & (BIT6 | BIT7)) == BIT7) {
|
|
return EFI_SUCCESS;
|
|
}
|
|
} while (++Retry < 40);
|
|
|
|
DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails at %d times with HostCtrl2 %02x\n", Retry, HostCtrl2));
|
|
//
|
|
// Abort the tuning procedure and reset the tuning circuit.
|
|
//
|
|
HostCtrl2 = (UINT8)~(BIT6 | BIT7);
|
|
Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
/**
|
|
Switch the bus width to specified width.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.9 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 3-7 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
@param[in] IsDdr If TRUE, use dual data rate data simpling method. Otherwise
|
|
use single data rate data simpling method.
|
|
@param[in] BusWidth The bus width to be set, it could be 4 or 8.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitchBusWidth (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
IN BOOLEAN IsDdr,
|
|
IN UINT8 BusWidth
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
UINT8 Access;
|
|
UINT8 Index;
|
|
UINT8 Value;
|
|
UINT8 CmdSet;
|
|
UINT32 DevStatus;
|
|
|
|
//
|
|
// Write Byte, the Value field is written into the byte pointed by Index.
|
|
//
|
|
Access = 0x03;
|
|
Index = OFFSET_OF (EMMC_EXT_CSD, BusWidth);
|
|
if (BusWidth == 4) {
|
|
Value = 1;
|
|
} else if (BusWidth == 8) {
|
|
Value = 2;
|
|
} else {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if (IsDdr) {
|
|
Value += 4;
|
|
}
|
|
|
|
CmdSet = 0;
|
|
Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));
|
|
return Status;
|
|
}
|
|
|
|
Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
//
|
|
// Check the switch operation is really successful or not.
|
|
//
|
|
if ((DevStatus & BIT7) != 0) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
Status = SdMmcHcSetBusWidth (PciIo, Slot, BusWidth);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Switch the bus timing and clock frequency.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 3-3 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
@param[in] DriverStrength Driver strength to set for speed modes that support it.
|
|
@param[in] BusTiming The bus mode timing indicator.
|
|
@param[in] ClockFreq The max clock frequency to be set, the unit is MHz.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitchBusTiming (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
IN EDKII_SD_MMC_DRIVER_STRENGTH DriverStrength,
|
|
IN SD_MMC_BUS_MODE BusTiming,
|
|
IN UINT32 ClockFreq
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
UINT8 Access;
|
|
UINT8 Index;
|
|
UINT8 Value;
|
|
UINT8 CmdSet;
|
|
UINT32 DevStatus;
|
|
SD_MMC_HC_PRIVATE_DATA *Private;
|
|
|
|
Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
|
|
//
|
|
// Write Byte, the Value field is written into the byte pointed by Index.
|
|
//
|
|
Access = 0x03;
|
|
Index = OFFSET_OF (EMMC_EXT_CSD, HsTiming);
|
|
CmdSet = 0;
|
|
switch (BusTiming) {
|
|
case SdMmcMmcHs400:
|
|
Value = (UINT8)((DriverStrength.Emmc << 4) | 3);
|
|
break;
|
|
case SdMmcMmcHs200:
|
|
Value = (UINT8)((DriverStrength.Emmc << 4) | 2);
|
|
break;
|
|
case SdMmcMmcHsSdr:
|
|
case SdMmcMmcHsDdr:
|
|
Value = 1;
|
|
break;
|
|
case SdMmcMmcLegacy:
|
|
Value = 0;
|
|
break;
|
|
default:
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusTiming: Unsupported BusTiming(%d\n)", BusTiming));
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusTiming: Switch to bus timing %d fails with %r\n", BusTiming, Status));
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// Convert the clock freq unit from MHz to KHz.
|
|
//
|
|
Status = SdMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, Private->BaseClkFreq[Slot], Private->ControllerVersion[Slot]);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusTiming: Send status fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
//
|
|
// Check the switch operation is really successful or not.
|
|
//
|
|
if ((DevStatus & BIT7) != 0) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSwitchBusTiming: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
|
|
Status = mOverride->NotifyPhase (
|
|
Private->ControllerHandle,
|
|
Slot,
|
|
EdkiiSdMmcSwitchClockFreqPost,
|
|
&BusTiming
|
|
);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((
|
|
DEBUG_ERROR,
|
|
"%a: SD/MMC switch clock freq post notifier callback failed - %r\n",
|
|
__FUNCTION__,
|
|
Status
|
|
));
|
|
return Status;
|
|
}
|
|
}
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Switch to the High Speed timing according to request.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 2-29 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
@param[in] BusMode Pointer to SD_MMC_BUS_SETTINGS structure containing bus settings.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitchToHighSpeed (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
IN SD_MMC_BUS_SETTINGS *BusMode
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
UINT8 HostCtrl1;
|
|
SD_MMC_HC_PRIVATE_DATA *Private;
|
|
BOOLEAN IsDdr;
|
|
|
|
Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
|
|
|
|
if ((BusMode->BusTiming != SdMmcMmcHsSdr && BusMode->BusTiming != SdMmcMmcHsDdr) ||
|
|
BusMode->ClockFreq > 52) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if (BusMode->BusTiming == SdMmcMmcHsDdr) {
|
|
IsDdr = TRUE;
|
|
} else {
|
|
IsDdr = FALSE;
|
|
}
|
|
|
|
Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusMode->BusWidth);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// Set to High Speed timing
|
|
//
|
|
HostCtrl1 = BIT2;
|
|
Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = SdMmcHcUhsSignaling (Private->ControllerHandle, PciIo, Slot, BusMode->BusTiming);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
return EmmcSwitchBusTiming (PciIo, PassThru, Slot, Rca, BusMode->DriverStrength, BusMode->BusTiming, BusMode->ClockFreq);
|
|
}
|
|
|
|
/**
|
|
Switch to the HS200 timing. This function assumes that eMMC bus is still in legacy mode.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 2-29 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
@param[in] BusMode Pointer to SD_MMC_BUS_SETTINGS structure containing bus settings.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitchToHS200 (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
IN SD_MMC_BUS_SETTINGS *BusMode
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
UINT16 ClockCtrl;
|
|
SD_MMC_HC_PRIVATE_DATA *Private;
|
|
|
|
Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
|
|
|
|
if (BusMode->BusTiming != SdMmcMmcHs200 ||
|
|
(BusMode->BusWidth != 4 && BusMode->BusWidth != 8)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, FALSE, BusMode->BusWidth);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
//
|
|
// Stop bus clock at first
|
|
//
|
|
Status = SdMmcHcStopClock (PciIo, Slot);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = SdMmcHcUhsSignaling (Private->ControllerHandle, PciIo, Slot, BusMode->BusTiming);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// Wait Internal Clock Stable in the Clock Control register to be 1 before set SD Clock Enable bit
|
|
//
|
|
Status = SdMmcHcWaitMmioSet (
|
|
PciIo,
|
|
Slot,
|
|
SD_MMC_HC_CLOCK_CTRL,
|
|
sizeof (ClockCtrl),
|
|
BIT1,
|
|
BIT1,
|
|
SD_MMC_HC_GENERIC_TIMEOUT
|
|
);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
//
|
|
// Set SD Clock Enable in the Clock Control register to 1
|
|
//
|
|
ClockCtrl = BIT2;
|
|
Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
|
|
|
|
Status = EmmcSwitchBusTiming (PciIo, PassThru, Slot, Rca, BusMode->DriverStrength, BusMode->BusTiming, BusMode->ClockFreq);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = EmmcTuningClkForHs200 (PciIo, PassThru, Slot, BusMode->BusWidth);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Switch to the HS400 timing. This function assumes that eMMC bus is still in legacy mode.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 2-29 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
@param[in] BusMode Pointer to SD_MMC_BUS_SETTINGS structure containing bus settings.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSwitchToHS400 (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca,
|
|
IN SD_MMC_BUS_SETTINGS *BusMode
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
SD_MMC_HC_PRIVATE_DATA *Private;
|
|
SD_MMC_BUS_SETTINGS Hs200BusMode;
|
|
UINT32 HsFreq;
|
|
|
|
if (BusMode->BusTiming != SdMmcMmcHs400 ||
|
|
BusMode->BusWidth != 8) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
|
|
Hs200BusMode.BusTiming = SdMmcMmcHs200;
|
|
Hs200BusMode.BusWidth = BusMode->BusWidth;
|
|
Hs200BusMode.ClockFreq = BusMode->ClockFreq;
|
|
Hs200BusMode.DriverStrength = BusMode->DriverStrength;
|
|
|
|
Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, &Hs200BusMode);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// Set to High Speed timing and set the clock frequency to a value less than or equal to 52MHz.
|
|
// This step is necessary to be able to switch Bus into 8 bit DDR mode which is unsupported in HS200.
|
|
//
|
|
Status = SdMmcHcUhsSignaling (Private->ControllerHandle, PciIo, Slot, SdMmcMmcHsSdr);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
HsFreq = BusMode->ClockFreq < 52 ? BusMode->ClockFreq : 52;
|
|
Status = EmmcSwitchBusTiming (PciIo, PassThru, Slot, Rca, BusMode->DriverStrength, SdMmcMmcHsSdr, HsFreq);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, TRUE, BusMode->BusWidth);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = SdMmcHcUhsSignaling (Private->ControllerHandle, PciIo, Slot, BusMode->BusTiming);
|
|
if (EFI_ERROR(Status)) {
|
|
return Status;
|
|
}
|
|
|
|
return EmmcSwitchBusTiming (PciIo, PassThru, Slot, Rca, BusMode->DriverStrength, BusMode->BusTiming, BusMode->ClockFreq);
|
|
}
|
|
|
|
/**
|
|
Check if passed BusTiming is supported in both controller and card.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to the card's extended CSD
|
|
@param[in] BusTiming Bus timing to check
|
|
|
|
@retval TRUE Both card and controller support given BusTiming
|
|
@retval FALSE Card or controller doesn't support given BusTiming
|
|
**/
|
|
BOOLEAN
|
|
EmmcIsBusTimingSupported (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd,
|
|
IN SD_MMC_BUS_MODE BusTiming
|
|
)
|
|
{
|
|
BOOLEAN Supported;
|
|
SD_MMC_HC_SLOT_CAP *Capabilities;
|
|
|
|
Capabilities = &Private->Capability[SlotIndex];
|
|
|
|
Supported = FALSE;
|
|
switch (BusTiming) {
|
|
case SdMmcMmcHs400:
|
|
if ((((ExtCsd->DeviceType & (BIT6 | BIT7)) != 0) && (Capabilities->Hs400 != 0)) && Capabilities->BusWidth8 != 0) {
|
|
Supported = TRUE;
|
|
}
|
|
break;
|
|
case SdMmcMmcHs200:
|
|
if ((((ExtCsd->DeviceType & (BIT4 | BIT5)) != 0) && (Capabilities->Sdr104 != 0))) {
|
|
Supported = TRUE;
|
|
}
|
|
break;
|
|
case SdMmcMmcHsDdr:
|
|
if ((((ExtCsd->DeviceType & (BIT2 | BIT3)) != 0) && (Capabilities->Ddr50 != 0))) {
|
|
Supported = TRUE;
|
|
}
|
|
break;
|
|
case SdMmcMmcHsSdr:
|
|
if ((((ExtCsd->DeviceType & BIT1) != 0) && (Capabilities->HighSpeed != 0))) {
|
|
Supported = TRUE;
|
|
}
|
|
break;
|
|
case SdMmcMmcLegacy:
|
|
if ((ExtCsd->DeviceType & BIT0) != 0) {
|
|
Supported = TRUE;
|
|
}
|
|
break;
|
|
default:
|
|
ASSERT (FALSE);
|
|
}
|
|
|
|
return Supported;
|
|
}
|
|
|
|
/**
|
|
Get the target bus timing to set on the link. This function
|
|
will try to select highest bus timing supported by card, controller
|
|
and the driver.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to the card's extended CSD
|
|
|
|
@return Bus timing value that should be set on link
|
|
**/
|
|
SD_MMC_BUS_MODE
|
|
EmmcGetTargetBusTiming (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd
|
|
)
|
|
{
|
|
SD_MMC_BUS_MODE BusTiming;
|
|
|
|
//
|
|
// We start with highest bus timing that this driver currently supports and
|
|
// return as soon as we find supported timing.
|
|
//
|
|
BusTiming = SdMmcMmcHs400;
|
|
while (BusTiming > SdMmcMmcLegacy) {
|
|
if (EmmcIsBusTimingSupported (Private, SlotIndex, ExtCsd, BusTiming)) {
|
|
break;
|
|
}
|
|
BusTiming--;
|
|
}
|
|
|
|
return BusTiming;
|
|
}
|
|
|
|
/**
|
|
Check if the passed bus width is supported by controller and card.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] BusTiming Bus timing set on the link
|
|
@param[in] BusWidth Bus width to check
|
|
|
|
@retval TRUE Passed bus width is supported in current bus configuration
|
|
@retval FALSE Passed bus width is not supported in current bus configuration
|
|
**/
|
|
BOOLEAN
|
|
EmmcIsBusWidthSupported (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN SD_MMC_BUS_MODE BusTiming,
|
|
IN UINT16 BusWidth
|
|
)
|
|
{
|
|
if (BusWidth == 8 && Private->Capability[SlotIndex].BusWidth8 != 0) {
|
|
return TRUE;
|
|
} else if (BusWidth == 4 && BusTiming != SdMmcMmcHs400) {
|
|
return TRUE;
|
|
} else if (BusWidth == 1 && (BusTiming == SdMmcMmcHsSdr || BusTiming == SdMmcMmcLegacy)) {
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
Get the target bus width to be set on the bus.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to card's extended CSD
|
|
@param[in] BusTiming Bus timing set on the bus
|
|
|
|
@return Bus width to be set on the bus
|
|
**/
|
|
UINT8
|
|
EmmcGetTargetBusWidth (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd,
|
|
IN SD_MMC_BUS_MODE BusTiming
|
|
)
|
|
{
|
|
UINT8 BusWidth;
|
|
UINT8 PreferredBusWidth;
|
|
|
|
PreferredBusWidth = Private->Slot[SlotIndex].OperatingParameters.BusWidth;
|
|
|
|
if (PreferredBusWidth != EDKII_SD_MMC_BUS_WIDTH_IGNORE &&
|
|
EmmcIsBusWidthSupported (Private, SlotIndex, BusTiming, PreferredBusWidth)) {
|
|
BusWidth = PreferredBusWidth;
|
|
} else if (EmmcIsBusWidthSupported (Private, SlotIndex, BusTiming, 8)) {
|
|
BusWidth = 8;
|
|
} else if (EmmcIsBusWidthSupported (Private, SlotIndex, BusTiming, 4)) {
|
|
BusWidth = 4;
|
|
} else {
|
|
BusWidth = 1;
|
|
}
|
|
|
|
return BusWidth;
|
|
}
|
|
|
|
/**
|
|
Get the target clock frequency to be set on the bus.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to card's extended CSD
|
|
@param[in] BusTiming Bus timing to be set on the bus
|
|
|
|
@return Value of the clock frequency to be set on bus in MHz
|
|
**/
|
|
UINT32
|
|
EmmcGetTargetClockFreq (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd,
|
|
IN SD_MMC_BUS_MODE BusTiming
|
|
)
|
|
{
|
|
UINT32 PreferredClockFreq;
|
|
UINT32 MaxClockFreq;
|
|
|
|
PreferredClockFreq = Private->Slot[SlotIndex].OperatingParameters.ClockFreq;
|
|
|
|
switch (BusTiming) {
|
|
case SdMmcMmcHs400:
|
|
case SdMmcMmcHs200:
|
|
MaxClockFreq = 200;
|
|
break;
|
|
case SdMmcMmcHsSdr:
|
|
case SdMmcMmcHsDdr:
|
|
MaxClockFreq = 52;
|
|
break;
|
|
default:
|
|
MaxClockFreq = 26;
|
|
break;
|
|
}
|
|
|
|
if (PreferredClockFreq != EDKII_SD_MMC_CLOCK_FREQ_IGNORE && PreferredClockFreq < MaxClockFreq) {
|
|
return PreferredClockFreq;
|
|
} else {
|
|
return MaxClockFreq;
|
|
}
|
|
}
|
|
|
|
/**
|
|
Get the driver strength to be set on bus.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to card's extended CSD
|
|
@param[in] BusTiming Bus timing set on the bus
|
|
|
|
@return Value of the driver strength to be set on the bus
|
|
**/
|
|
EDKII_SD_MMC_DRIVER_STRENGTH
|
|
EmmcGetTargetDriverStrength (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd,
|
|
IN SD_MMC_BUS_MODE BusTiming
|
|
)
|
|
{
|
|
EDKII_SD_MMC_DRIVER_STRENGTH PreferredDriverStrength;
|
|
EDKII_SD_MMC_DRIVER_STRENGTH DriverStrength;
|
|
|
|
PreferredDriverStrength = Private->Slot[SlotIndex].OperatingParameters.DriverStrength;
|
|
DriverStrength.Emmc = EmmcDriverStrengthType0;
|
|
|
|
if (PreferredDriverStrength.Emmc != EDKII_SD_MMC_DRIVER_STRENGTH_IGNORE &&
|
|
(ExtCsd->DriverStrength & (BIT0 << PreferredDriverStrength.Emmc))) {
|
|
DriverStrength.Emmc = PreferredDriverStrength.Emmc;
|
|
}
|
|
|
|
return DriverStrength;
|
|
}
|
|
|
|
/**
|
|
Get the target settings for the bus mode.
|
|
|
|
@param[in] Private Pointer to controller private data
|
|
@param[in] SlotIndex Index of the slot in the controller
|
|
@param[in] ExtCsd Pointer to card's extended CSD
|
|
@param[out] BusMode Target configuration of the bus
|
|
**/
|
|
VOID
|
|
EmmcGetTargetBusMode (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 SlotIndex,
|
|
IN EMMC_EXT_CSD *ExtCsd,
|
|
OUT SD_MMC_BUS_SETTINGS *BusMode
|
|
)
|
|
{
|
|
BusMode->BusTiming = EmmcGetTargetBusTiming (Private, SlotIndex, ExtCsd);
|
|
BusMode->BusWidth = EmmcGetTargetBusWidth (Private, SlotIndex, ExtCsd, BusMode->BusTiming);
|
|
BusMode->ClockFreq = EmmcGetTargetClockFreq (Private, SlotIndex, ExtCsd, BusMode->BusTiming);
|
|
BusMode->DriverStrength = EmmcGetTargetDriverStrength (Private, SlotIndex, ExtCsd, BusMode->BusTiming);
|
|
}
|
|
|
|
/**
|
|
Switch the high speed timing according to request.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
|
|
Simplified Spec 3.0 Figure 2-29 for details.
|
|
|
|
@param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
|
|
@param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
@param[in] Rca The relative device address to be assigned.
|
|
|
|
@retval EFI_SUCCESS The operation is done correctly.
|
|
@retval Others The operation fails.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcSetBusMode (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
|
|
IN UINT8 Slot,
|
|
IN UINT16 Rca
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
EMMC_CSD Csd;
|
|
EMMC_EXT_CSD ExtCsd;
|
|
SD_MMC_BUS_SETTINGS BusMode;
|
|
SD_MMC_HC_PRIVATE_DATA *Private;
|
|
|
|
Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
|
|
|
|
Status = EmmcGetCsd (PassThru, Slot, Rca, &Csd);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetCsd fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
|
|
Status = EmmcSelect (PassThru, Slot, Rca);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: Select fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
|
|
ASSERT (Private->BaseClkFreq[Slot] != 0);
|
|
|
|
//
|
|
// Get Device_Type from EXT_CSD register.
|
|
//
|
|
Status = EmmcGetExtCsd (PassThru, Slot, &ExtCsd);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetExtCsd fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
|
|
EmmcGetTargetBusMode (Private, Slot, &ExtCsd, &BusMode);
|
|
|
|
DEBUG ((DEBUG_INFO, "EmmcSetBusMode: Target bus mode: timing = %d, width = %d, clock freq = %d, driver strength = %d\n",
|
|
BusMode.BusTiming, BusMode.BusWidth, BusMode.ClockFreq, BusMode.DriverStrength.Emmc));
|
|
|
|
if (BusMode.BusTiming == SdMmcMmcHs400) {
|
|
Status = EmmcSwitchToHS400 (PciIo, PassThru, Slot, Rca, &BusMode);
|
|
} else if (BusMode.BusTiming == SdMmcMmcHs200) {
|
|
Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, &BusMode);
|
|
} else {
|
|
Status = EmmcSwitchToHighSpeed (PciIo, PassThru, Slot, Rca, &BusMode);
|
|
}
|
|
|
|
DEBUG ((DEBUG_INFO, "EmmcSetBusMode: Switch to %a %r\n", (BusMode.BusTiming == SdMmcMmcHs400) ? "HS400" : ((BusMode.BusTiming == SdMmcMmcHs200) ? "HS200" : "HighSpeed"), Status));
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Execute EMMC device identification procedure.
|
|
|
|
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
|
|
|
|
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
|
|
@param[in] Slot The slot number of the SD card to send the command to.
|
|
|
|
@retval EFI_SUCCESS There is a EMMC card.
|
|
@retval Others There is not a EMMC card.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EmmcIdentification (
|
|
IN SD_MMC_HC_PRIVATE_DATA *Private,
|
|
IN UINT8 Slot
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
EFI_PCI_IO_PROTOCOL *PciIo;
|
|
EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
|
|
UINT32 Ocr;
|
|
UINT16 Rca;
|
|
UINTN Retry;
|
|
|
|
PciIo = Private->PciIo;
|
|
PassThru = &Private->PassThru;
|
|
|
|
Status = EmmcReset (PassThru, Slot);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd0 fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
|
|
Ocr = 0;
|
|
Retry = 0;
|
|
do {
|
|
Status = EmmcGetOcr (PassThru, Slot, &Ocr);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd1 fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
Ocr |= BIT30;
|
|
|
|
if (Retry++ == 100) {
|
|
DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd1 fails too many times\n"));
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
gBS->Stall(10 * 1000);
|
|
} while ((Ocr & BIT31) == 0);
|
|
|
|
Status = EmmcGetAllCid (PassThru, Slot);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd2 fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
//
|
|
// Slot starts from 0 and valid RCA starts from 1.
|
|
// Here we takes a simple formula to calculate the RCA.
|
|
// Don't support multiple devices on the slot, that is
|
|
// shared bus slot feature.
|
|
//
|
|
Rca = Slot + 1;
|
|
Status = EmmcSetRca (PassThru, Slot, Rca);
|
|
if (EFI_ERROR(Status)) {
|
|
DEBUG ((DEBUG_ERROR, "EmmcIdentification: Executing Cmd3 fails with %r\n", Status));
|
|
return Status;
|
|
}
|
|
//
|
|
// Enter Data Tranfer Mode.
|
|
//
|
|
DEBUG ((DEBUG_INFO, "EmmcIdentification: Found a EMMC device at slot [%d], RCA [%d]\n", Slot, Rca));
|
|
Private->Slot[Slot].CardType = EmmcCardType;
|
|
|
|
Status = EmmcSetBusMode (PciIo, PassThru, Slot, Rca);
|
|
|
|
return Status;
|
|
}
|
|
|