mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-11-26 12:05:36 +01:00
1574 lines
88 KiB
Plaintext
1574 lines
88 KiB
Plaintext
## @file MdeModulePkg.dec
|
|
#
|
|
# This package provides the modules that conform to UEFI/PI Industry standards.
|
|
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
|
|
# and libraries instances, which are used for those modules.
|
|
#
|
|
# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
|
|
# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
|
|
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
|
|
# This program and the accompanying materials are licensed and made available under
|
|
# the terms and conditions of the BSD License that accompanies this distribution.
|
|
# The full text of the license may be found at
|
|
# http://opensource.org/licenses/bsd-license.php.
|
|
#
|
|
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
#
|
|
##
|
|
|
|
|
|
[Defines]
|
|
DEC_SPECIFICATION = 0x00010005
|
|
PACKAGE_NAME = MdeModulePkg
|
|
PACKAGE_UNI_FILE = MdeModulePkg.uni
|
|
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
|
|
PACKAGE_VERSION = 0.96
|
|
|
|
[Includes]
|
|
Include
|
|
|
|
|
|
[LibraryClasses]
|
|
## @libraryclass IpIo layer upon EFI IP4 Protocol.
|
|
# This library is only intended to be used by UEFI network stack modules.
|
|
IpIoLib|Include/Library/IpIoLib.h
|
|
|
|
## @libraryclass Basic function for UEFI network stack.
|
|
# This library is only intended to be used by UEFI network stack modules.
|
|
NetLib|Include/Library/NetLib.h
|
|
|
|
## @libraryclass The helper routines to access UDP service.
|
|
# This library is only intended to be used by UEFI network stack modules.
|
|
UdpIoLib|Include/Library/UdpIoLib.h
|
|
|
|
## @libraryclass The helper routines to access TCP service.
|
|
# This library is only intended to be used by UEFI network stack modules.
|
|
TcpIoLib|Include/Library/TcpIoLib.h
|
|
|
|
## @libraryclass The helper routines to access HTTP service.
|
|
# This library is only intended to be used by UEFI network stack modules.
|
|
HttpLib|Include/Library/HttpLib.h
|
|
|
|
## @libraryclass Defines a set of methods to reset whole system.
|
|
ResetSystemLib|Include/Library/ResetSystemLib.h
|
|
|
|
## @libraryclass Defines a set of methods related do S3 mode.
|
|
# This library class is no longer used and modules using this library should
|
|
# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
|
|
S3Lib|Include/Library/S3Lib.h
|
|
|
|
## @libraryclass Defines a set of methods related recovery mode.
|
|
# This library class is no longer used and modules using this library should
|
|
# directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
|
|
RecoveryLib|Include/Library/RecoveryLib.h
|
|
|
|
## @libraryclass Provides HII related functions.
|
|
HiiLib|Include/Library/HiiLib.h
|
|
|
|
## @libraryclass Defines a set of interfaces on how to process capusle image update.
|
|
CapsuleLib|Include/Library/CapsuleLib.h
|
|
|
|
## @libraryclass Library for Deferred Procedure Calls.
|
|
DpcLib|Include/Library/DpcLib.h
|
|
|
|
## @libraryclass Provides global variables that are pointers
|
|
# to the UEFI HII related protocols.
|
|
#
|
|
UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
|
|
|
|
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
|
|
#
|
|
SecurityManagementLib|Include/Library/SecurityManagementLib.h
|
|
|
|
## @libraryclass OEM status code libary is used to report status code to OEM device.
|
|
#
|
|
OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
|
|
|
|
## @libraryclass Debug Agent is used to provide soft debug capability.
|
|
#
|
|
DebugAgentLib|Include/Library/DebugAgentLib.h
|
|
|
|
## @libraryclass Provide platform specific hooks.
|
|
#
|
|
PlatformHookLib|Include/Library/PlatformHookLib.h
|
|
|
|
## @libraryclass Provide platform specific hooks for SMM core.
|
|
#
|
|
SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
|
|
|
|
## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
|
|
#
|
|
LockBoxLib|Include/Library/LockBoxLib.h
|
|
|
|
## @libraryclass Provide the CPU exception handler.
|
|
#
|
|
CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
|
|
|
|
## @libraryclass Provides platform specific display interface.
|
|
#
|
|
CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
|
|
|
|
## @libraryclass Provides sorting functions
|
|
SortLib|Include/Library/SortLib.h
|
|
|
|
## @libraryclass Provides core boot manager functions
|
|
UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
|
|
|
|
## @libraryclass Provides core boot manager functions
|
|
PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
|
|
|
|
## @libraryclass Provides common interfaces about TPM measurement for other modules.
|
|
#
|
|
TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
|
|
|
|
## @libraryclass Provides authenticated variable services.
|
|
#
|
|
AuthVariableLib|Include/Library/AuthVariableLib.h
|
|
|
|
## @libraryclass Provides variable check services and database management.
|
|
#
|
|
VarCheckLib|Include/Library/VarCheckLib.h
|
|
|
|
## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
|
|
#
|
|
PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
|
|
|
|
## @libraryclass Provides services to get do the file explorer.
|
|
#
|
|
FileExplorerLib|Include/Library/FileExplorerLib.h
|
|
|
|
## @libraryclass Provides image decoding service.
|
|
#
|
|
ImageDecoderLib|Include/Library/ImageDecoderLib.h
|
|
|
|
## @libraryclass Provides interfaces about logo display.
|
|
#
|
|
BootLogoLib|Include/Library/BootLogoLib.h
|
|
|
|
## @libraryclass Provides interfaces about Ipmi submit generic commond.
|
|
#
|
|
IpmiLib|Include/Library/IpmiLib.h
|
|
|
|
## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
|
|
#
|
|
PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
|
|
|
|
[Guids]
|
|
## MdeModule package token space guid
|
|
# Include/Guid/MdeModulePkgTokenSpace.h
|
|
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
|
|
|
|
## Hob guid for Pcd DataBase
|
|
# Include/Guid/PcdDataBaseHobGuid.h
|
|
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
|
|
|
|
## Guid for PCD DataBase signature.
|
|
# Include/Guid/PcdDataBaseSignatureGuid.h
|
|
gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
|
|
|
|
## Guid for EDKII implementation GUIDed opcodes
|
|
# Include/Guid/MdeModuleHii.h
|
|
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
|
|
|
|
## Guid for Framework vfr GUIDed opcodes.
|
|
# Include/Guid/MdeModuleHii.h
|
|
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
|
|
|
|
## Guid to specify the System Non Volatile FV
|
|
# Include/Guid/SystemNvDataGuid.h
|
|
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
|
|
|
|
## GUID used as the signature of FTW working block header.
|
|
# Include/Guid/SystemNvDataGuid.h
|
|
gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
|
|
|
|
## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
|
|
# Include/Guid/FaultTolerantWrite.h
|
|
gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
|
|
|
|
## Guid specify the device is the console out device.
|
|
# Include/Guid/ConsoleOutDevice.h
|
|
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Guid specify the device is the console in device.
|
|
# Include/Guid/ConsoleInDevice.h
|
|
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Hob and Variable guid specify the platform memory type information.
|
|
# Include/Guid/MemoryTypeInformation.h
|
|
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
|
|
|
|
## Capsule update hob and variable guid
|
|
# Include/Guid/CapsuleVendor.h
|
|
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
|
|
|
|
## Guid specifiy the device is the StdErr device.
|
|
# Include/Guid/StandardErrorDevice.h
|
|
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
|
|
# Include/Guid/VariableFormat.h
|
|
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
|
|
|
|
## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
|
|
# Include/Guid/AuthenticatedVariableFormat.h
|
|
gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
|
|
|
|
# Include/Guid/VariableIndexTable.h
|
|
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
|
|
|
|
## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
|
|
# Include/Guid/SmmVariableCommon.h
|
|
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
|
|
|
|
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
|
|
# Include/Guid/Performance.h
|
|
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
|
|
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
|
|
gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
|
|
gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
|
|
|
|
## Guid is defined for CRC32 encapsulation scheme.
|
|
# Include/Guid/Crc32GuidedSectionExtraction.h
|
|
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
|
|
|
|
## Include/Guid/NicIp4ConfigNvData.h
|
|
gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
|
|
|
|
## Include/Guid/StatusCodeCallbackGuid.h
|
|
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
|
|
|
|
## GUID identifies status code records HOB that originate from the PEI status code
|
|
# Include/Guid/MemoryStatusCodeRecord.h
|
|
gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
|
|
|
|
## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
|
|
# Include/Guid/StatusCodeDataTypeDebug.h
|
|
gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
|
|
|
|
## A configuration Table Guid for Load module at fixed address
|
|
# Include/Guid/LoadModuleAtFixedAddress.h
|
|
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
|
|
|
|
## GUID used to store the global debug mask value into an EFI Variable
|
|
# Include/Guid/DebugMask.h
|
|
gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
|
|
|
|
## Event for the DXE Core to signal idle events
|
|
# Include/Guid/EventIdle.h
|
|
gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
|
|
|
|
## Include/Guid/RecoveryDevice.h
|
|
gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
|
|
|
|
## Include/Guid/RecoveryDevice.h
|
|
gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
|
|
|
|
## Include/Guid/RecoveryDevice.h
|
|
gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
|
|
|
|
## Include/Guid/RecoveryDevice.h
|
|
gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
|
|
|
|
## Include/Guid/SmmLockBox.h
|
|
gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
|
|
|
|
## Include/Guid/AcpiS3Context.h
|
|
gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
|
|
|
|
## Include/Guid/AcpiS3Context.h
|
|
gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
|
|
|
|
## Include/Guid/BootScriptExecutorVariable.h
|
|
gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
|
|
gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
|
|
|
|
## Include/Guid/UsbKeyBoardLayout.h
|
|
gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
|
|
gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
|
|
|
|
## Include/Guid/HiiResourceSampleHii.h
|
|
gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
|
|
|
|
## Include/Guid/DriverSampleHii.h
|
|
gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
|
|
gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
|
|
gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
|
|
|
|
## Include/Guid/PlatDriOverrideHii.h
|
|
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
|
|
|
|
## Include/Guid/Ip4ConfigHii.h
|
|
gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
|
|
|
|
## Include/Guid/Ip4Config2Hii.h
|
|
gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
|
|
|
|
## Include/Guid/VlanConfigHii.h
|
|
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
|
|
|
|
## Include/Guid/Ip4IScsiConfigHii.h
|
|
gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
|
|
gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
|
|
|
|
## Include/Guid/ZeroGuid.h
|
|
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
|
|
|
|
## Include/Guid/MtcVendor.h
|
|
gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
|
|
|
|
## Guid for Firmware Performance Data Table (FPDT) implementation.
|
|
# Include/Guid/FirmwarePerformance.h
|
|
gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
|
|
gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
|
|
|
|
## Include/Guid/ExitBootServiceFailed.h
|
|
gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
|
|
|
|
## Include/Guid/ConnectConInEvent.h
|
|
gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
|
|
|
|
## Include/Guid/StatusCodeDataTypeVariable.h
|
|
gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
|
|
|
|
## Include/Guid/MemoryProfile.h
|
|
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
|
|
|
|
## Include/Protocol/VarErrorFlag.h
|
|
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
|
|
|
|
## GUID indicates the LZMA custom compress/decompress algorithm.
|
|
# Include/Guid/LzmaDecompress.h
|
|
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
|
|
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
|
|
|
|
## Include/Guid/TtyTerm.h
|
|
gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
|
|
|
|
## Include/Guid/HiiBootMaintenanceFormset.h
|
|
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
|
|
|
|
gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
|
|
|
|
## Include/Guid/RamDiskHii.h
|
|
gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
|
|
|
|
|
|
[Ppis]
|
|
## Include/Ppi/AtaController.h
|
|
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
|
|
|
|
## Include/Ppi/UsbHostController.h
|
|
gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
|
|
|
|
## Include/Ppi/Usb2HostController.h
|
|
gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
|
|
|
|
## Include/Ppi/UsbController.h
|
|
gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
|
|
|
|
## Include/Ppi/UsbIo.h
|
|
gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
|
|
|
|
## Include/Ppi/Capsule.h
|
|
gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
|
|
|
|
## Include/Ppi/SecPerformance.h
|
|
gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
|
|
|
|
## Include/Ppi/SmmCommunication.h
|
|
gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
|
|
|
|
## Include/Ppi/SmmAccess.h
|
|
gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
|
|
|
|
## Include/Ppi/SmmControl.h
|
|
gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
|
|
|
|
## Include/Ppi/PostBootScriptTable.h
|
|
gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
|
|
|
|
## Include/Ppi/SerialPortPei.h
|
|
gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
|
|
|
|
## Include/Ppi/UfsHostController.h
|
|
gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
|
|
|
|
## Include/Ppi/IpmiPpi.h
|
|
gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
|
|
|
|
## Include/Ppi/SdMmcHostController.h
|
|
gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
|
|
|
|
[Protocols]
|
|
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
|
|
# Include/Protocol/LoadPe32Image.h
|
|
# This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
|
|
# If developer need implement such functionality, they should use BasePeCoffLib.
|
|
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
|
|
|
|
## Print protocol defines basic print functions to print the format unicode and ascii string.
|
|
# Include/Protocol/Print2.h
|
|
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
|
|
|
|
## This protocol defines the generic memory test interfaces in Dxe phase.
|
|
# Include/Protocol/GenericMemoryTest.h
|
|
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
|
|
|
|
## Include/Protocol/Dpc.h
|
|
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
|
|
|
|
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
|
|
# Include/Protocol/FaultTolerantWrite.h
|
|
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
|
|
|
|
## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
|
|
# Include/Protocol/SmmFaultTolerantWrite.h
|
|
gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
|
|
|
|
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
|
|
# Include/Protocol/SwapAddressRange.h
|
|
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
|
|
|
|
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
|
|
# Include/Protocol/SmmSwapAddressRange.h
|
|
gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
|
|
|
|
## This protocol is intended for use as a means to store data in the EFI SMM environment.
|
|
# Include/Protocol/SmmVariableProtocol.h
|
|
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
|
|
|
|
## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
|
|
# Include/Protocol/VariableLock.h
|
|
gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
|
|
|
|
## Include/Protocol/VarCheck.h
|
|
gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
|
|
|
|
## Include/Protocol/SmmVarCheck.h
|
|
gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
|
|
|
|
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
|
|
# Include/Protocol/SmmFirmwareVolumeBlock.h
|
|
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
|
|
|
|
## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
|
|
# Include/Guid/DebugMask.h
|
|
gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
|
|
|
|
## Include/Protocol/LockBox.h
|
|
gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
|
|
|
|
## Include/Protocol/FormBrowserEx.h
|
|
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
|
|
|
|
## Include/Protocol/EbcVmTest.h
|
|
gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
|
|
|
|
## Include/Protocol/EbcSimpleDebugger.h
|
|
gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
|
|
|
|
## Include/Protocol/BootLogo.h
|
|
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
|
|
|
|
## Include/Protocol/DisplayProtocol.h
|
|
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
|
|
|
|
## Include/Protocol/FormBrowserEx2.h
|
|
gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
|
|
|
|
## Include/Protocol/UfsHostController.h
|
|
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
|
|
|
|
## Include/Protocol/EsrtManagement.h
|
|
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
|
|
|
|
## Include/Protocol/SmmExitBootServices.h
|
|
gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
|
|
|
|
## Include/Protocol/SmmLegacyBoot.h
|
|
gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
|
|
|
|
## Include/Protocol/SmmReadyToBoot.h
|
|
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
|
|
|
|
## Include/Protocol/PlatformLogo.h
|
|
gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
|
|
|
|
## Include/Protocol/FileExplorer.h
|
|
gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
|
|
|
|
## Include/Protocol/IpmiProtocol.h
|
|
gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
|
|
gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
|
|
|
|
#
|
|
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
|
|
# 0x80000001 | Invalid value provided.
|
|
# 0x80000002 | Reserved bits must be set to zero.
|
|
# 0x80000003 | Incorrect progress code provided.
|
|
# 0x80000004 | Invalid foreground color specified.
|
|
# 0x80000005 | Invalid background color specified.
|
|
# 0x80000006 | Incorrect error code provided.
|
|
#
|
|
|
|
[PcdsFeatureFlag]
|
|
## Indicates if the platform can support update capsule across a system reset.<BR><BR>
|
|
# TRUE - Supports update capsule across a system reset.<BR>
|
|
# FALSE - Does not support update capsule across a system reset.<BR>
|
|
# @Prompt Enable update capsule across a system reset.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
|
|
|
|
## Indicates if all PCD PPI services will be enabled.<BR><BR>
|
|
# TRUE - All PCD PPI services will be produced.<BR>
|
|
# FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
|
|
# @Prompt Enable full PEI PCD services.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
|
|
|
|
## Indicates if the Device Path To Text Protocol should be produced by the platform.
|
|
# It can be disabled to save size.<BR><BR>
|
|
# TRUE - Device Path To Text Protocol will be produced.<BR>
|
|
# FALSE - Device Path To Text Protocol will not be produced.<BR>
|
|
# @Prompt Enable Device Path to Text support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
|
|
|
|
## Indicates if the Device Path From Text Protocol should be produced by the platform.
|
|
# It can be disabled to save size.<BR><BR>
|
|
# TRUE - Device Path From Text Protocol will be produced.<BR>
|
|
# FALSE - Device Path From Text Protocol will not be produced.<BR>
|
|
# @Prompt Enable Device Path From Text support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
|
|
|
|
## Indicates if the statistics about variable usage will be collected. This information is
|
|
# stored as a vendor configuration table into the EFI system table.
|
|
# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
|
|
# variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
|
|
# TRUE - Statistics about variable usage will be collected.<BR>
|
|
# FALSE - Statistics about variable usage will not be collected.<BR>
|
|
# @Prompt Enable variable statistics collection.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
|
|
|
|
## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
|
|
# TRUE - Installs Unicode Collation Protocol.<BR>
|
|
# FALSE - Does not install Unicode Collation Protocol.<BR>
|
|
# @Prompt Enable Unicode Collation support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
|
|
|
|
## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
|
|
# TRUE - Installs Unicode Collation 2 Protocol.<BR>
|
|
# FALSE - Does not install Unicode Collation 2 Protocol.<BR>
|
|
# @Prompt Enable Unicode Collation 2 support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
|
|
|
|
## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|
# It could be set FALSE to save size.<BR><BR>
|
|
# TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|
# FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|
# @Prompt Enable ConOut GOP support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
|
|
|
|
## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|
# It could be set FALSE to save size.<BR><BR>
|
|
# TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|
# FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|
# @Prompt Enable ConOut UGA support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
|
|
|
|
## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
|
|
# This PCD is used to tune PEI phase performance to reduce the search image time.
|
|
# It can be set according to the generated image section type.<BR><BR>
|
|
# TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
|
|
# FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
|
|
# @Prompt PeiCore search TE section first.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
|
|
|
|
## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
|
|
# interrupt to access usb device in the case of absence of usb stack.
|
|
# DUET platform requires the token to be TRUE.<BR><BR>
|
|
# TRUE - Turn off usb legacy support.<BR>
|
|
# FALSE - Does not turn off usb legacy support.<BR>
|
|
# @Prompt Turn off USB legacy support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
|
|
|
|
## Indicates if HiiImageProtocol will be installed.
|
|
# FALSE is for size reduction.<BR><BR>
|
|
# TRUE - Installs HiiImageProtocol.<BR>
|
|
# FALSE - Does not install HiiImageProtocol.<BR>
|
|
# @Prompt Enable HII image support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
|
|
|
|
## Indicates if USB KeyBoard Driver disables the default keyboard layout.
|
|
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
|
|
# from HII database.<BR><BR>
|
|
# TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
|
|
# FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
|
|
# @Prompt Disable default keyboard layout in USB KeyBoard Driver.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
|
|
|
|
## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
|
|
# TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
|
|
# the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
|
|
# FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
|
|
# the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
|
|
# @Prompt Enable framework backward compatibility support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
|
|
|
|
## Indicates if HelloWorld Application will print the verbose information.
|
|
# This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
|
|
# TRUE - HelloWorld Application will print the verbose information.<BR>
|
|
# FALSE - HelloWorld Application will not print the verbose information.<BR>
|
|
# @Prompt Enable HelloWorld print.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
|
|
|
|
## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
|
|
# TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
|
|
# FALSE - Only FTW Write service is available.<BR>
|
|
# @Prompt Enable FULL FTW services.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
|
|
|
|
## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
|
|
# TRUE - DXE IPL will support UEFI decompression.<BR>
|
|
# FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
|
|
# @Prompt Enable UEFI decompression support in DXE IPL.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
|
|
|
|
## Indicates if PciBus driver supports the hot plug device.<BR><BR>
|
|
# TRUE - PciBus driver supports the hot plug device.<BR>
|
|
# FALSE - PciBus driver doesn't support the hot plug device.<BR>
|
|
# @Prompt Enable PciBus hot plug device support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
|
|
|
|
## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
|
|
# TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
|
|
# FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
|
|
# @Prompt Enable PCI bridge IO alignment probe.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
|
|
|
|
## Indicates if StatusCode is reported via Serial port.<BR><BR>
|
|
# TRUE - Reports StatusCode via Serial port.<BR>
|
|
# FALSE - Does not report StatusCode via Serial port.<BR>
|
|
# @Prompt Enable StatusCode via Serial port.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|FALSE|BOOLEAN|0x00010022
|
|
|
|
## Indicates if StatusCode is stored in memory.
|
|
# The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
|
|
# TRUE - Stores StatusCode in memory.<BR>
|
|
# FALSE - Does not store StatusCode in memory.<BR>
|
|
# @Prompt Enable StatusCode via memory.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
|
|
|
|
## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
|
|
# TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
|
|
# FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
|
|
# @Prompt Enable PEI StatusCode replay in DXE phase
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
|
|
|
|
## Indicates if ACPI SDT protocol will be installed.<BR><BR>
|
|
# TRUE - Installs ACPI SDT protocol.<BR>
|
|
# FALSE - Does not install ACPI SDT protocol.<BR>
|
|
# @Prompt Enable ACPI SDT support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
|
|
|
|
## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
|
|
# The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
|
|
# TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
|
|
# FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
|
|
# @Prompt Enable unaligned PCI I/O support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
|
|
|
|
## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
|
|
# TRUE - TEXT statement will always be set to GrayOut.<BR>
|
|
# FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
|
|
# @Prompt Always GrayOut TEXT statement.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
|
|
|
|
## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
|
|
# TRUE - The unselectable menu will be set to GrayOut.<BR>
|
|
# FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
|
|
# @Prompt GrayOut read only menu.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
|
|
|
|
## Indicates if recovery from IDE disk will be supported.<BR><BR>
|
|
# TRUE - Supports recovery from IDE disk.<BR>
|
|
# FALSE - Does not support recovery from IDE disk.<BR>
|
|
# @Prompt Enable recovery on IDE disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
|
|
|
|
## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
|
|
# TRUE - Supports recovery from FAT floppy disk.<BR>
|
|
# FALSE - Does not support recovery from FAT floppy disk.<BR>
|
|
# @Prompt Enable recovery on FAT floppy disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|FALSE|BOOLEAN|0x00010061
|
|
|
|
## Indicates if recovery from data CD will be supported.<BR><BR>
|
|
# TRUE - Supports recovery from data CD.<BR>
|
|
# FALSE - Does not support recovery from data CD.<BR>
|
|
# @Prompt Enable recovery on data CD.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
|
|
|
|
## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
|
|
# TRUE - Supports recovery from USB disk.<BR>
|
|
# FALSE - Does not support recovery from USB disk.<BR>
|
|
# @Prompt Enable recovery on FAT USB disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
|
|
|
|
## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
|
|
# TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
|
|
# FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
|
|
# @Prompt Enable S3 performance data support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|FALSE|BOOLEAN|0x00010064
|
|
|
|
## Indicates if Serial device uses half hand shake.<BR><BR>
|
|
# TRUE - Serial device uses half hand shake.<BR>
|
|
# FALSE - Serial device doesn't use half hand shake.<BR>
|
|
# @Prompt Enable Serial device Half Hand Shake
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
|
|
|
|
## Indicates if HII data and configuration has been exported.<BR><BR>
|
|
# Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
|
|
# simulator platform because the performance cost for this feature.
|
|
# TRUE - Export HII data and configuration data.<BR>
|
|
# FALSE - Does not export HII data and configuration.<BR>
|
|
# @Prompt Enable export HII data and configuration to be used in OS runtime.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
|
|
|
|
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
|
|
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
|
|
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
|
|
# is built in firmware.<BR><BR>
|
|
# TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
|
|
# FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
|
|
# @Prompt DxeIpl switch to long mode.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
|
|
|
|
## Indicates if DxeIpl should rebuild page tables. This flag only
|
|
# makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
|
|
# TRUE - DxeIpl will rebuild page tables.<BR>
|
|
# FALSE - DxeIpl will not rebuild page tables.<BR>
|
|
# @Prompt DxeIpl rebuild page tables.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
|
|
|
|
[PcdsFixedAtBuild]
|
|
## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
|
|
# 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
|
|
# 0: Disable the feature.<BR>
|
|
# Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
|
|
# @Prompt Enable LMFA feature.
|
|
# @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
|
|
|
|
## Progress Code for OS Loader LoadImage start.<BR><BR>
|
|
# PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
|
|
# @Prompt Progress Code for OS Loader LoadImage start.
|
|
# @ValidList 0x80000003 | 0x03058000
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
|
|
|
|
## Progress Code for OS Loader StartImage start.<BR><BR>
|
|
# PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
|
|
# @Prompt Progress Code for OS Loader StartImage start.
|
|
# @ValidList 0x80000003 | 0x03058001
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
|
|
|
|
## Progress Code for S3 Suspend start.<BR><BR>
|
|
# PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
|
|
# @Prompt Progress Code for S3 Suspend start.
|
|
# @ValidList 0x80000003 | 0x03078000
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
|
|
|
|
## Progress Code for S3 Suspend end.<BR><BR>
|
|
# PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
|
|
# @Prompt Progress Code for S3 Suspend end.
|
|
# @ValidList 0x80000003 | 0x03078001
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
|
|
|
|
## Error Code for SetVariable failure.<BR><BR>
|
|
# EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
|
|
# @Prompt Error Code for SetVariable failure.
|
|
# @ValidList 0x80000006 | 0x03058002
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
|
|
|
|
[PcdsFixedAtBuild, PcdsPatchableInModule]
|
|
## Dynamic type PCD can be registered callback function for Pcd setting action.
|
|
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
|
|
# for a dynamic PCD used in PEI phase.
|
|
# @Prompt Max PEI PCD callback number per PCD entry.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
|
|
|
|
## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
|
|
# to store PCD value.
|
|
# @Prompt VPD base address.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
|
|
|
|
## Maximum number of FV is supported by PeiCore's dispatching.
|
|
# @Prompt Maximum number of FV supported by PeiCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
|
|
|
|
## Maximum File count in every FV is supported by PeiCore's dispatching.
|
|
# PeiCore supported File type includes PEIM, Combined PEIM and FV.
|
|
# @Prompt Maximum File count per FV supported by PeiCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
|
|
|
|
## Maximum stack size for PeiCore.
|
|
# @Prompt Maximum stack size for PeiCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
|
|
|
|
## Maximum PPI count is supported by PeiCore's PPI database.
|
|
# @Prompt Maximum PPI count supported by PeiCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
|
|
|
|
## The maximum size of a single non-HwErr type variable.
|
|
# @Prompt Maximum variable size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
|
|
|
|
## The maximum size of a single authenticated variable.
|
|
# The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
|
|
# @Prompt Maximum authenticated variable size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
|
|
|
|
## The maximum size of single hardware error record variable.<BR><BR>
|
|
# In IA32/X64 platforms, this value should be larger than 1KB.<BR>
|
|
# In IA64 platforms, this value should be larger than 128KB.<BR>
|
|
# @Prompt Maximum HwErr variable size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
|
|
|
|
## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
|
|
# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
|
|
# so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
|
|
# this value is used to guarantee the space of HwErr type variable and not populated by common variable.
|
|
# @Prompt HwErr variable storage size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
|
|
|
|
## The size of maximum user NV variable space.<BR><BR>
|
|
# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
|
|
# If the value is 0, it means user variable share the same NV storage with system variable,
|
|
# this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
|
|
# If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
|
|
# otherwise the variable will be regarded as user variable.<BR>
|
|
# 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
|
|
# 2) Variables managed by Variable driver internally.<BR>
|
|
# 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
|
|
# 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
|
|
# The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
|
|
# @Prompt Maximum user NV variable space size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
|
|
|
|
## The size of NV variable space reserved at UEFI boottime.<BR><BR>
|
|
# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
|
|
# In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
|
|
# So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
|
|
# Then the common NV variable space size at boottime will be
|
|
# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
|
|
# and the common NV variable space size at runtime will be
|
|
# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
|
|
# @Prompt Boottime reserved NV variable space size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
|
|
|
|
## Reclaim variable space at EndOfDxe.<BR><BR>
|
|
# The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
|
|
# If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
|
|
# @Prompt Reclaim variable space at EndOfDxe.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
|
|
|
|
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
|
|
# @Prompt Variable storage size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
|
|
|
|
## FFS filename to find the ACPI tables.
|
|
# @Prompt FFS name of ACPI tables storage.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
|
|
|
|
## FFS filename to find the capsule coalesce image.
|
|
# @Prompt FFS name of capsule coalesce image.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
|
|
|
|
## Maximum number of performance log entries during PEI phase.
|
|
# Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
|
|
# more than 255.
|
|
# @Prompt Maximum number of PEI performance log entries.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
|
|
|
|
## Maximum number of performance log entries during PEI phase.
|
|
# If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
|
|
# entries. If greater than 0, then this PCD determines the number of entries,
|
|
# and PcdMaxPeiPerformanceLogEntries is ignored.
|
|
# @Prompt Maximum number of PEI performance log entries.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
|
|
|
|
## RTC Update Timeout Value(microsecond).
|
|
# @Prompt RTC Update Timeout Value.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
|
|
|
|
## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
|
|
# TRUE - 16550 serial port registers are in MMIO space.<BR>
|
|
# FALSE - 16550 serial port registers are in I/O space.<BR>
|
|
# @Prompt Serial port registers use MMIO.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
|
|
|
|
## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
|
|
# TRUE - 16550 serial port hardware flow control will be enabled.<BR>
|
|
# FALSE - 16550 serial port hardware flow control will be disabled.<BR>
|
|
# @Prompt Enable serial port hardware flow control.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
|
|
|
|
## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
|
|
# This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
|
|
# TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
|
|
# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
|
|
# @Prompt Enable serial port cable detetion.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
|
|
|
|
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
|
|
# @Prompt Base address of serial port registers.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
|
|
|
|
## Baud rate for the 16550 serial port. Default is 115200 baud.
|
|
# @Prompt Baud rate for serial port.
|
|
# @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
|
|
|
|
## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
|
|
# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
|
|
# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
|
|
# BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
|
|
# BIT7..BIT6 - Reserved. Must be 0.<BR>
|
|
#
|
|
# Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
|
|
# @Prompt Serial port Line Control settings.
|
|
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
|
|
|
|
## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
|
|
# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
|
|
# BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
|
|
# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
|
|
# BIT4..BIT3 - Reserved. Must be 0.<BR>
|
|
# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
|
|
# BIT7..BIT6 - Reserved. Must be 0.<BR>
|
|
#
|
|
# Default is to enable and clear all FIFOs.<BR>
|
|
# @Prompt Serial port FIFO Control settings.
|
|
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
|
|
|
|
## This setting can override the default TFTP block size. A value of 0 computes
|
|
# the default from MTU information. A non-zero value will be used as block size
|
|
# in bytes.
|
|
# @Prompt TFTP block size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
|
|
|
|
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
|
|
# structure. The default value for this PCD is 0, which means that the DXE Core
|
|
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
|
|
# boundary as close to the top of memory as feasible. If this PCD is set to a
|
|
# value other than 0, then the DXE Core will first attempt to allocate the
|
|
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
|
|
# by this PCD, and if that allocation fails, retry the allocation on a 4MB
|
|
# boundary as close to the top of memory as feasible.
|
|
# @Prompt Maximum Efi System Table Pointer address.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
|
|
|
|
## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
|
|
# TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
|
|
# FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
|
|
# @Prompt Shadow Peim On S3 Boot.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
|
|
|
|
## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
|
|
# This PCD is used on other boot path except for S3 boot.
|
|
# TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>
|
|
# FALSE - Not shadow PEIM after memory is ready.<BR>
|
|
# @Prompt Shadow Peim and PeiCore on boot
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
|
|
|
|
## The mask is used to control memory profile behavior.<BR><BR>
|
|
# BIT0 - Enable UEFI memory profile.<BR>
|
|
# BIT1 - Enable SMRAM profile.<BR>
|
|
# @Prompt Memory Profile Property.
|
|
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
|
|
|
|
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
|
|
# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
|
|
#
|
|
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
|
|
# EfiReservedMemoryType 0x0001<BR>
|
|
# EfiLoaderCode 0x0002<BR>
|
|
# EfiLoaderData 0x0004<BR>
|
|
# EfiBootServicesCode 0x0008<BR>
|
|
# EfiBootServicesData 0x0010<BR>
|
|
# EfiRuntimeServicesCode 0x0020<BR>
|
|
# EfiRuntimeServicesData 0x0040<BR>
|
|
# EfiConventionalMemory 0x0080<BR>
|
|
# EfiUnusableMemory 0x0100<BR>
|
|
# EfiACPIReclaimMemory 0x0200<BR>
|
|
# EfiACPIMemoryNVS 0x0400<BR>
|
|
# EfiMemoryMappedIO 0x0800<BR>
|
|
# EfiMemoryMappedIOPortSpace 0x1000<BR>
|
|
# EfiPalCode 0x2000<BR>
|
|
# EfiPersistentMemory 0x4000<BR>
|
|
# OEM Reserved 0x4000000000000000<BR>
|
|
# OS Reserved 0x8000000000000000<BR>
|
|
#
|
|
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
|
|
#
|
|
# @Prompt Memory profile memory type.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
|
|
|
|
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
|
|
# information that describes the path that contains zero or more PCI to PCI briges
|
|
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
|
|
# first byte is the PCI Device Number, then second byte is the PCI Function Number,
|
|
# and the last two bytes are the offset to the PCI power management capabilities
|
|
# register used to manage the D0-D3 states. If a PCI power management capabilities
|
|
# register is not present, then the last two bytes in the offset is set to 0. The
|
|
# array is terminated by an array entry with a PCI Device Number of 0xFF. For a
|
|
# non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
|
|
# @Prompt Pci Serial Device Info
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
|
|
|
|
## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
|
|
# BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
|
|
# describes the parameters of special PCI serial devices.
|
|
# Each array entry is 24-byte in length. The array is terminated
|
|
# by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
|
|
# standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
|
|
# The C style structure is defined as below:<BR>
|
|
# typedef struct {<BR>
|
|
# UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
|
|
# UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
|
|
# UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
|
|
# UINT64 Offset; ///< The byte offset into to the BAR.<BR>
|
|
# UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>
|
|
# UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
|
|
# UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
|
|
# UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
|
|
# UINT8 Reserved[2];<BR>
|
|
# } PCI_SERIAL_PARAMETER;<BR>
|
|
# It contains zero or more instances of the above structure.<BR>
|
|
# For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
|
|
# to contain two instances of the above structure, with the VendorId and DeviceId
|
|
# equals to the Device ID and Vendor ID of the device; If the PCI device uses the
|
|
# first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
|
|
# BarIndex of second one equals to 1; If the PCI device uses the first BAR to
|
|
# support both UARTs, BarIndex of both instance equals to 0, Offset of first
|
|
# instance equals to 0 and Offset of second one equals to a value bigger than or
|
|
# equal to 8.<BR>
|
|
# For certain UART whose register needs to be accessed in DWORD aligned address,
|
|
# RegisterStride equals to 4.
|
|
# @Prompt Pci Serial Parameters
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
|
|
|
|
## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
|
|
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
|
|
|
|
## This PCD points to the file name GUID of the BootManagerMenuApp
|
|
# Platform can customize the PCD to point to different application for Boot Manager Menu
|
|
# @Prompt Boot Manager Menu File
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
|
|
|
|
## This PCD points to the formset GUID of the driver health management form
|
|
# The form will be popped up by BDS core when there are Configuration Required driver health intances.
|
|
# Platform can customize the PCD to point to different formset.
|
|
# @Prompt Driver Health Management Form
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
|
|
|
|
## The number of bytes between registers in serial device. The default is 1 byte.
|
|
# @Prompt Serial Port Register Stride in Bytes
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
|
|
|
|
## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
|
|
# Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
|
|
# If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
|
|
# @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
|
|
|
|
## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
|
|
# These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
|
|
# BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
|
|
# BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
|
|
# BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
|
|
# BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
|
|
# BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
|
|
# @Prompt Exposed ACPI table versions.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
|
|
|
|
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
|
|
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
|
|
# This PCD could be set to 0 then console output would be at max column and max row.
|
|
# @Prompt Console output row.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|0|UINT32|0x40000006
|
|
|
|
## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
|
|
# This PCD could be set to 0 then console output would be at max column and max row.
|
|
# @Prompt Console output column.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|0|UINT32|0x40000007
|
|
|
|
## This PCD defines the video horizontal resolution.
|
|
# If this PCD is set to 0 then video resolution would be at highest resolution.
|
|
# @Prompt Video horizontal resolution.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|0|UINT32|0x40000009
|
|
|
|
## This PCD defines the video vertical resolution.
|
|
# If this PCD is set to 0 then video resolution would be at highest resolution.
|
|
# @Prompt Video vertical resolution.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|0|UINT32|0x4000000a
|
|
|
|
# The 4 PCDs below are used to specify the video resolution and text mode of text setup.
|
|
# To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
|
|
# PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
|
|
# Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
|
|
# (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
|
|
# for text setup.
|
|
|
|
## Specify the video horizontal resolution of text setup.
|
|
# @Prompt Video Horizontal Resolution of Text Setup
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
|
|
|
|
## Specify the video vertical resolution of text setup.
|
|
# @Prompt Video Vertical Resolution of Text Setup
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
|
|
|
|
## Specify the console output column of text setup.
|
|
# @Prompt Console Output Column of Text Setup
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
|
|
|
|
## Specify the console output row of text setup.
|
|
# @Prompt Console Output Row of Text Setup
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
|
|
|
|
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
|
|
## UART clock frequency is for the baud rate configuration.
|
|
# @Prompt Serial Port Clock Rate.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
|
|
|
|
## This PCD points to the front page formset GUID
|
|
# Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
|
|
# @Prompt Front Page Formset.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
|
|
|
|
## Base address of the NV variable range in flash device.
|
|
# @Prompt Base address of flash NV variable range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
|
|
|
|
## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
|
|
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
|
|
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
|
|
# be reflushed through the manner of fault tolerant write.
|
|
# @Prompt Size of flash NV variable range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
|
|
|
|
## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
|
|
# @Prompt Base address of flash FTW spare block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
|
|
|
|
## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
|
|
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
|
|
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
|
|
# be reflushed through the manner of fault tolerant write.
|
|
# @Prompt Size of flash FTW spare block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
|
|
|
|
## Base address of the FTW working block range in flash device.
|
|
# If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
|
|
# @Prompt Base address of flash FTW working block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
|
|
|
|
## Size of the FTW working block range.
|
|
# If the value is less than one block size, the work space range should not span blocks.
|
|
# If the value is larger than one block size, it should be block size aligned.
|
|
# @Prompt Size of flash FTW working block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
|
|
|
|
## 64-bit Base address of the NV variable range in flash device.
|
|
# @Prompt 64-bit Base address of flash NV variable range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
|
|
|
|
## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
|
|
# @Prompt 64-bit Base address of flash FTW spare block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
|
|
|
|
## 64-bit Base address of the FTW working block range in flash device.
|
|
# If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
|
|
# @Prompt 64-bit Base address of flash FTW working block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
|
|
|
|
## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
|
|
# The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
|
|
# @Prompt Reserved memory range for EMU variable NV storage.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
|
|
|
|
|
|
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
|
|
|
|
## This PCD defines the times to print hello world string.
|
|
# This PCD is a sample to explain UINT32 PCD usage.
|
|
# @Prompt HellowWorld print times.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
|
|
|
|
## This PCD defines the HelloWorld print string.
|
|
# This PCD is a sample to explain String typed PCD usage.
|
|
# @Prompt HelloWorld print string.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello Clover!\n"|VOID*|0x40000004
|
|
|
|
## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
|
|
# The default max size is 100MB (0x6400000) for more than one large capsule images.
|
|
# @Prompt Max size of populated capsule.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
|
|
|
|
## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
|
|
# The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
|
|
# @Prompt Max size of non-populated capsule.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
|
|
|
|
## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
|
|
# @Prompt Firmware vendor.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"CLOVER"|VOID*|0x00010050
|
|
|
|
## Firmware revision that is the default revision filled into the EFI System Table.
|
|
# @Prompt Firmware revision.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010010|UINT32|0x00010051
|
|
|
|
## Null-terminated Unicode string that describes the firmware version.
|
|
# @Prompt Firmware version string.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
|
|
|
|
## Null-terminated Unicode string that contains the date the firmware was released
|
|
# @Prompt Firmware release data string.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
|
|
|
|
## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
|
|
# (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
|
|
# The default value in PeiPhase is 1 KBytes.<BR>
|
|
# The default value in DxePhase is 128 KBytes.<BR>
|
|
# @Prompt StatusCode memory size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
|
|
|
|
## Indicates if to reset system when memory type information changes.<BR><BR>
|
|
# TRUE - Resets system when memory type information changes.<BR>
|
|
# FALSE - Does not reset system when memory type information changes.<BR>
|
|
# @Prompt Reset on memory type information change.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
|
|
|
|
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
|
|
# Only following values defined in UEFI specification are valid:<BR><BR>
|
|
# 0x00 (EFI_BLACK)<BR>
|
|
# 0x01 (EFI_BLUE)<BR>
|
|
# 0x02 (EFI_GREEN)<BR>
|
|
# 0x03 (EFI_CYAN)<BR>
|
|
# 0x04 (EFI_RED)<BR>
|
|
# 0x05 (EFI_MAGENTA)<BR>
|
|
# 0x06 (EFI_BROWN)<BR>
|
|
# 0x07 (EFI_LIGHTGRAY)<BR>
|
|
# 0x08 (EFI_DARKGRAY)<BR>
|
|
# 0x09 (EFI_LIGHTBLUE)<BR>
|
|
# 0x0A (EFI_LIGHTGREEN)<BR>
|
|
# 0x0B (EFI_LIGHTCYAN)<BR>
|
|
# 0x0C (EFI_LIGHTRED)<BR>
|
|
# 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|
# 0x0E (EFI_YELLOW)<BR>
|
|
# 0x0F (EFI_WHITE)<BR>
|
|
# @Prompt Foreground color for browser subtile.
|
|
# @ValidRange 0x80000004 | 0x00 - 0x0F
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
|
|
|
|
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
|
|
# Only following values defined in UEFI specification are valid:<BR><BR>
|
|
# 0x00 (EFI_BLACK)<BR>
|
|
# 0x01 (EFI_BLUE)<BR>
|
|
# 0x02 (EFI_GREEN)<BR>
|
|
# 0x03 (EFI_CYAN)<BR>
|
|
# 0x04 (EFI_RED)<BR>
|
|
# 0x05 (EFI_MAGENTA)<BR>
|
|
# 0x06 (EFI_BROWN)<BR>
|
|
# 0x07 (EFI_LIGHTGRAY)<BR>
|
|
# 0x08 (EFI_DARKGRAY)<BR>
|
|
# 0x09 (EFI_LIGHTBLUE)<BR>
|
|
# 0x0A (EFI_LIGHTGREEN)<BR>
|
|
# 0x0B (EFI_LIGHTCYAN)<BR>
|
|
# 0x0C (EFI_LIGHTRED)<BR>
|
|
# 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|
# 0x0E (EFI_YELLOW)<BR>
|
|
# 0x0F (EFI_WHITE)<BR>
|
|
# @Prompt Foreground color for browser field.
|
|
# @ValidRange 0x80000004 | 0x00 - 0x0F
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
|
|
|
|
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
|
|
# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
|
|
# 0x00 (EFI_BLACK)<BR>
|
|
# 0x01 (EFI_BLUE)<BR>
|
|
# 0x02 (EFI_GREEN)<BR>
|
|
# 0x03 (EFI_CYAN)<BR>
|
|
# 0x04 (EFI_RED)<BR>
|
|
# 0x05 (EFI_MAGENTA)<BR>
|
|
# 0x06 (EFI_BROWN)<BR>
|
|
# 0x07 (EFI_LIGHTGRAY)<BR>
|
|
# 0x08 (EFI_DARKGRAY)<BR>
|
|
# 0x09 (EFI_LIGHTBLUE)<BR>
|
|
# 0x0A (EFI_LIGHTGREEN)<BR>
|
|
# 0x0B (EFI_LIGHTCYAN)<BR>
|
|
# 0x0C (EFI_LIGHTRED)<BR>
|
|
# 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|
# 0x0E (EFI_YELLOW)<BR>
|
|
# 0x0F (EFI_WHITE)<BR>
|
|
# @Prompt Foreground color for highlighted browser field.
|
|
# @ValidRange 0x80000004 | 0x00 - 0x0F
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
|
|
|
|
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
|
|
# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
|
|
# 0x00 (EFI_BACKGROUND_BLACK)<BR>
|
|
# 0x10 (EFI_BACKGROUND_BLUE)<BR>
|
|
# 0x20 (EFI_BACKGROUND_GREEN)<BR>
|
|
# 0x30 (EFI_BACKGROUND_CYAN)<BR>
|
|
# 0x40 (EFI_BACKGROUND_RED)<BR>
|
|
# 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
|
|
# 0x60 (EFI_BACKGROUND_BROWN)<BR>
|
|
# 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
|
|
# @Prompt Background color for highlighted browser field.
|
|
# @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
|
|
|
|
## Time in second to delay for SATA devices to spin-up for recovery.
|
|
# @Prompt SATA spin-up delay time in second for recovery path.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
|
|
|
|
## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
|
|
# to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
|
|
# When changing the value of this PCD, the platform developer should make sure the memory size is
|
|
# large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
|
|
# @Prompt Reserved page number for S3 Boot Script Runtime Table.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
|
|
|
|
## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
|
|
# The default size is 32K. When changing the value of this PCD, the platform developer should
|
|
# make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
|
|
# @Prompt Stack size for CapsulePei transfer to long mode.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
|
|
|
|
## Indicates if 1G page table will be enabled.<BR><BR>
|
|
# TRUE - 1G page table will be enabled.<BR>
|
|
# FALSE - 1G page table will not be enabled.<BR>
|
|
# @Prompt Enable 1G page table support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
|
|
|
|
## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
|
|
# TRUE - Single Root I/O virtualization is supported.<BR>
|
|
# FALSE - Single Root I/O virtualization is not supported.<BR>
|
|
# @Prompt Enable SRIOV support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
|
|
|
|
## Indicates if the Alternative Routing-ID is supported.<BR><BR>
|
|
# TRUE - Alternative Routing-ID is supported.<BR>
|
|
# FALSE - Alternative Routing-ID is not supported.<BR>
|
|
# @Prompt Enable ARI support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
|
|
|
|
## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
|
|
# TRUE - Multi Root I/O virtualization is supported.<BR>
|
|
# FALSE - Multi Root I/O virtualization is not supported.<BR>
|
|
# @Prompt Enable MRIOV support.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
|
|
|
|
## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
|
|
# BITN set indicates 2 of n+12 power<BR>
|
|
# BIT0 set indicates 4KB alignment<BR>
|
|
# BIT1 set indicates 8KB alignment<BR>
|
|
# @Prompt SRIOV system page size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
|
|
|
|
## SMBIOS version.
|
|
# @Prompt SMBIOS version.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0204|UINT16|0x00010055
|
|
|
|
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
|
|
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
|
|
|
|
## SMBIOS produce method.
|
|
# BIT0 set indicates 32-bit entry point and table are produced.<BR>
|
|
# BIT1 set indicates 64-bit entry point and table are produced.<BR>
|
|
# @Prompt The policy to produce SMBIOS entry point and table.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
|
|
|
|
## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
|
|
# the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
|
|
# @Prompt Pad size for extension FPDT boot records.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
|
|
|
|
## Indicates if ConIn device are connected on demand.<BR><BR>
|
|
# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
|
|
# by Consplitter should be called before any real key read operation.<BR>
|
|
# FALSE - ConIn device may be connected normally during BDS.<BR>
|
|
# @Prompt ConIn connect on demand.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
|
|
|
|
## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
|
|
# TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
|
|
# FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
|
|
# @Prompt Enable ATA S.M.A.R.T feature.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
|
|
|
|
## Indicates if full PCI enumeration is disabled.<BR><BR>
|
|
# TRUE - Full PCI enumeration is disabled.<BR>
|
|
# FALSE - Full PCI enumeration is not disabled.<BR>
|
|
# @Prompt Disable full PCI enumeration.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
|
|
|
|
## Disk I/O - Number of Data Buffer block.
|
|
# Define the size in block of the pre-allocated buffer. It provide better
|
|
# performance for large Disk I/O requests.
|
|
# @Prompt Disk I/O - Number of Data Buffer block.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
|
|
|
|
## This PCD specifies the PCI-based UFS host controller mmio base address.
|
|
# Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
|
|
# host controllers, their mmio base addresses are calculated one by one from this base address.
|
|
# @Prompt Mmio base address of pci-based UFS host controller.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
|
|
|
|
## Specify Max ESRT cache entry number supported for FMP instances
|
|
#
|
|
# @Prompt Max FMP ESRT entry number to be synced & cached in repository.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
|
|
|
|
## Specify Max ESRT cache entry number supported for Non FMP instances
|
|
#
|
|
# @Prompt Max Non-FMP ESRT entry number to be cached in repository.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
|
|
|
|
## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
|
|
#
|
|
# @Prompt Flag to request system reboot after processing capsule.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
|
|
|
|
## Publish PropertiesTable or not.
|
|
#
|
|
# If this PCD is TRUE, DxeCore publishs PropertiesTable.
|
|
# DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
|
|
# PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
|
|
# PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
|
|
# If this PCD is FALSE, DxeCore does not publish PropertiesTable.
|
|
#
|
|
# If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
|
|
# 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
|
|
# use EfiRuntimeServicesData for runtime driver PE image header and other section.
|
|
# 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
|
|
# 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
|
|
# 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
|
|
#
|
|
# NOTE: Platform need gurantee this PCD is set correctly. Platform should set
|
|
# this PCD to be TURE if and only if all runtime driver has seperated Code/Data
|
|
# section. If PE code/data sections are merged, the result is unpredictable.
|
|
#
|
|
# UEFI 2.6 specification does not recommend to use this BIT0 attribute.
|
|
#
|
|
# @Prompt Publish UEFI PropertiesTable.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
|
|
|
|
## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
|
|
# @Prompt Default OEM ID for ACPI table creation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
|
|
|
|
## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
|
|
# According to ACPI specification, this field is particularly useful when
|
|
# defining a definition block to distinguish definition block functions.
|
|
# The OEM assigns each dissimilar table a new OEM Table ID.
|
|
# This PCD is ignored for definition block.
|
|
# @Prompt Default OEM Table ID for ACPI table creation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
|
|
|
|
## Default OEM Revision for ACPI table creation.
|
|
# According to ACPI specification, for LoadTable() opcode, the OS can also
|
|
# check the OEM Table ID and Revision ID against a database for a newer
|
|
# revision Definition Block of the same OEM Table ID and load it instead.
|
|
# This PCD is ignored for definition block.
|
|
# @Prompt Default OEM Revision for ACPI table creation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
|
|
|
|
## Default Creator ID for ACPI table creation.
|
|
# According to ACPI specification, for tables containing Definition Blocks,
|
|
# this is the ID for the ASL Compiler.
|
|
# This PCD is ignored for definition block.
|
|
# @Prompt Default Creator ID for ACPI table creation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
|
|
|
|
## Default Creator Revision for ACPI table creation.
|
|
# According to ACPI specification, for tables containing Definition Blocks,
|
|
# this is the revision for the ASL Compiler.
|
|
# This PCD is ignored for definition block.
|
|
# @Prompt Default Creator Revision for ACPI table creation.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
|
|
|
|
## Indicates if to set NX for stack.<BR><BR>
|
|
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
|
|
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
|
|
# IA32 PAE is supported and Execute Disable Bit is available.<BR>
|
|
# TRUE - to set NX for stack.<BR>
|
|
# FALSE - Not to set NX for stack.<BR>
|
|
# @Prompt Set NX for stack.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
|
|
|
|
## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
|
|
# Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
|
|
# host controllers, their mmio base addresses are calculated one by one from this base address.
|
|
# @Prompt Mmio base address of pci-based SD/MMC host controller.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
|
|
|
|
[PcdsPatchableInModule]
|
|
## Specify memory size with page number for PEI code when
|
|
# Loading Module at Fixed Address feature is enabled.
|
|
# The value will be set by the build tool.
|
|
# @Prompt LMFA PEI code page number.
|
|
# @ValidList 0x80000001 | 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
|
|
|
|
## Specify memory size with page number for DXE boot time code when
|
|
# Loading Module at Fixed Address feature is enabled.
|
|
# The value will be set by the build tool.
|
|
# @Prompt LMFA DXE boot code page number.
|
|
# @ValidList 0x80000001 | 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
|
|
|
|
## Specify memory size with page number for DXE runtime code when
|
|
# Loading Module at Fixed Address feature is enabled.
|
|
# The value will be set by the build tool.
|
|
# @Prompt LMFA DXE runtime code page number.
|
|
# @ValidList 0x80000001 | 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
|
|
|
|
## Specify memory size with page number for SMM code when
|
|
# Loading Module at Fixed Address feature is enabled.
|
|
# The value will be set by the build tool.
|
|
# @Prompt LMFA SMM code page number.
|
|
# @ValidList 0x80000001 | 0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
|
|
|
|
[PcdsDynamic, PcdsDynamicEx]
|
|
## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
|
|
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
|
|
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
|
|
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
|
|
# @Prompt S3 Boot Script Table Private Data pointer.
|
|
# @ValidList 0x80000001 | 0x0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
|
|
|
|
## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
|
|
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
|
|
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
|
|
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
|
|
# @Prompt S3 Boot Script Table Private Smm Data pointer.
|
|
# @ValidList 0x80000001 | 0x0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
|
|
|
|
## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
|
|
# Virtual to Physical mapping according to the processor physical address bits.
|
|
# @Prompt Identify Mapping Page Table pointer.
|
|
# @ValidList 0x80000001 | 0x0
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
|
|
|
|
[UserExtensions.TianoCore."ExtraFiles"]
|
|
MdeModulePkgExtra.uni
|