Upstream/CloverBootloader
1
0
Fork 0
mirror of https://github.com/CloverHackyColor/CloverBootloader.git synced 2024-12-18 15:27:48 +01:00
Code Issues Packages Projects Releases Wiki Activity
a23e29cc65
CloverBootloader/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
Sergey Isakov 7c0aa811ec initial commit Clover sources 5061 and modules from EDK2 latest with legacy codes from UDK2018 
Signed-off-by: Sergey Isakov <isakov-sl@bk.ru>
2019-09-03 12:58:42 +03:00

498 lines
25 KiB
C
Raw Blame History

/** @file
Header file for EmmcDxe Driver.
This file defines common data structures, macro definitions and some module
internal function header files.
Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _EMMC_BLOCK_IO_H_
#define _EMMC_BLOCK_IO_H_
/**
Reset the Block Device.
@param This Indicates a pointer to the calling context.
@param ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
EmmcReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
);
/**
Read BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
EmmcReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Write BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId The media ID that the write request is for.
@param Lba The starting logical block address to be written. The caller is
responsible for writing to only legitimate locations.
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
EmmcWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
);
/**
Flush the Block Device.
@param This Indicates a pointer to the calling context.
@retval EFI_SUCCESS All outstanding data was written to the device
@retval EFI_DEVICE_ERROR The device reported an error while writing back the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
EFIAPI
EmmcFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
);
/**
Reset the Block Device.
@param[in] This Indicates a pointer to the calling context.
@param[in] ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
EmmcResetEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
);
/**
Read BufferSize bytes from Lba into Buffer.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId Id of the media, changes every time the media is replaced.
@param[in] Lba The starting Logical Block Address to read from.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[out] Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The read request was queued if Event is not NULL.
The data was read correctly from the device if
the Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the
intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
EmmcReadBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Write BufferSize bytes from Lba into Buffer.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the write request is for.
@param[in] Lba The starting logical block address to be written. The
caller is responsible for writing to only legitimate
locations.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[in] Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
EmmcWriteBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
IN VOID *Buffer
);
/**
Flush the Block Device.
@param[in] This Indicates a pointer to the calling context.
@param[in, out] Token A pointer to the token associated with the transaction.
@retval EFI_SUCCESS All outstanding data was written to the device
@retval EFI_DEVICE_ERROR The device reported an error while writing back the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
EFIAPI
EmmcFlushBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN OUT EFI_BLOCK_IO2_TOKEN *Token
);
/**
Send a security protocol command to a device that receives data and/or the result
of one or more commands sent by SendData.
The ReceiveData function sends a security protocol command to the given MediaId.
The security protocol command sent is defined by SecurityProtocolId and contains
the security protocol specific data SecurityProtocolSpecificData. The function
returns the data from the security protocol command in PayloadBuffer.
For devices supporting the SCSI command set, the security protocol command is sent
using the SECURITY PROTOCOL IN command defined in SPC-4.
For devices supporting the ATA command set, the security protocol command is sent
using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
is non-zero.
If the PayloadBufferSize is zero, the security protocol command is sent using the
Trusted Non-Data command defined in ATA8-ACS.
If PayloadBufferSize is too small to store the available data from the security
protocol command, the function shall copy PayloadBufferSize bytes into the
PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
the function shall return EFI_INVALID_PARAMETER.
If the given MediaId does not support security protocol commands, the function shall
return EFI_UNSUPPORTED. If there is no media in the device, the function returns
EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
the function returns EFI_MEDIA_CHANGED.
If the security protocol fails to complete within the Timeout period, the function
shall return EFI_TIMEOUT.
If the security protocol command completes without an error, the function shall
return EFI_SUCCESS. If the security protocol command completes with an error, the
function shall return EFI_DEVICE_ERROR.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId ID of the medium to receive data from.
@param[in] Timeout The timeout, in 100ns units, to use for the execution
of the security protocol command. A Timeout value of 0
means that this function will wait indefinitely for the
security protocol command to execute. If Timeout is greater
than zero, then this function will return EFI_TIMEOUT
if the time required to execute the receive data command
is greater than Timeout.
@param[in] SecurityProtocolId The value of the "Security Protocol" parameter of
the security protocol command to be sent.
@param[in] SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
of the security protocol command to be sent.
@param[in] PayloadBufferSize Size in bytes of the payload data buffer.
@param[out] PayloadBuffer A pointer to a destination buffer to store the security
protocol command specific payload data for the security
protocol command. The caller is responsible for having
either implicit or explicit ownership of the buffer.
@param[out] PayloadTransferSize A pointer to a buffer to store the size in bytes of the
data written to the payload data buffer.
@param[in] IsRead Indicates it is a read or write operation.
@retval EFI_SUCCESS The security protocol command completed successfully.
@retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
data from the device. The PayloadBuffer contains the truncated data.
@retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
@retval EFI_DEVICE_ERROR The security protocol command completed with an error.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
PayloadBufferSize is non-zero.
@retval EFI_TIMEOUT A timeout occurred while waiting for the security
protocol command to execute.
**/
EFI_STATUS
EFIAPI
EmmcSecurityProtocolInOut (
IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
IN UINT32 MediaId,
IN UINT64 Timeout,
IN UINT8 SecurityProtocolId,
IN UINT16 SecurityProtocolSpecificData,
IN UINTN PayloadBufferSize,
OUT VOID *PayloadBuffer,
OUT UINTN *PayloadTransferSize,
IN BOOLEAN IsRead
);
/**
Send a security protocol command to a device that receives data and/or the result
of one or more commands sent by SendData.
The ReceiveData function sends a security protocol command to the given MediaId.
The security protocol command sent is defined by SecurityProtocolId and contains
the security protocol specific data SecurityProtocolSpecificData. The function
returns the data from the security protocol command in PayloadBuffer.
For devices supporting the SCSI command set, the security protocol command is sent
using the SECURITY PROTOCOL IN command defined in SPC-4.
For devices supporting the ATA command set, the security protocol command is sent
using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
is non-zero.
If the PayloadBufferSize is zero, the security protocol command is sent using the
Trusted Non-Data command defined in ATA8-ACS.
If PayloadBufferSize is too small to store the available data from the security
protocol command, the function shall copy PayloadBufferSize bytes into the
PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
the function shall return EFI_INVALID_PARAMETER.
If the given MediaId does not support security protocol commands, the function shall
return EFI_UNSUPPORTED. If there is no media in the device, the function returns
EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
the function returns EFI_MEDIA_CHANGED.
If the security protocol fails to complete within the Timeout period, the function
shall return EFI_TIMEOUT.
If the security protocol command completes without an error, the function shall
return EFI_SUCCESS. If the security protocol command completes with an error, the
function shall return EFI_DEVICE_ERROR.
@param This Indicates a pointer to the calling context.
@param MediaId ID of the medium to receive data from.
@param Timeout The timeout, in 100ns units, to use for the execution
of the security protocol command. A Timeout value of 0
means that this function will wait indefinitely for the
security protocol command to execute. If Timeout is greater
than zero, then this function will return EFI_TIMEOUT
if the time required to execute the receive data command
is greater than Timeout.
@param SecurityProtocolId The value of the "Security Protocol" parameter of
the security protocol command to be sent.
@param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
of the security protocol command to be sent.
@param PayloadBufferSize Size in bytes of the payload data buffer.
@param PayloadBuffer A pointer to a destination buffer to store the security
protocol command specific payload data for the security
protocol command. The caller is responsible for having
either implicit or explicit ownership of the buffer.
@param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
data written to the payload data buffer.
@retval EFI_SUCCESS The security protocol command completed successfully.
@retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
data from the device. The PayloadBuffer contains the truncated data.
@retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
@retval EFI_DEVICE_ERROR The security protocol command completed with an error.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
PayloadBufferSize is non-zero.
@retval EFI_TIMEOUT A timeout occurred while waiting for the security
protocol command to execute.
**/
EFI_STATUS
EFIAPI
EmmcSecurityProtocolIn (
IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
IN UINT32 MediaId,
IN UINT64 Timeout,
IN UINT8 SecurityProtocolId,
IN UINT16 SecurityProtocolSpecificData,
IN UINTN PayloadBufferSize,
OUT VOID *PayloadBuffer,
OUT UINTN *PayloadTransferSize
);
/**
Send a security protocol command to a device.
The SendData function sends a security protocol command containing the payload
PayloadBuffer to the given MediaId. The security protocol command sent is
defined by SecurityProtocolId and contains the security protocol specific data
SecurityProtocolSpecificData. If the underlying protocol command requires a
specific padding for the command payload, the SendData function shall add padding
bytes to the command payload to satisfy the padding requirements.
For devices supporting the SCSI command set, the security protocol command is sent
using the SECURITY PROTOCOL OUT command defined in SPC-4.
For devices supporting the ATA command set, the security protocol command is sent
using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
is non-zero. If the PayloadBufferSize is zero, the security protocol command is
sent using the Trusted Non-Data command defined in ATA8-ACS.
If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
return EFI_INVALID_PARAMETER.
If the given MediaId does not support security protocol commands, the function
shall return EFI_UNSUPPORTED. If there is no media in the device, the function
returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
device, the function returns EFI_MEDIA_CHANGED.
If the security protocol fails to complete within the Timeout period, the function
shall return EFI_TIMEOUT.
If the security protocol command completes without an error, the function shall return
EFI_SUCCESS. If the security protocol command completes with an error, the function
shall return EFI_DEVICE_ERROR.
@param This Indicates a pointer to the calling context.
@param MediaId ID of the medium to receive data from.
@param Timeout The timeout, in 100ns units, to use for the execution
of the security protocol command. A Timeout value of 0
means that this function will wait indefinitely for the
security protocol command to execute. If Timeout is greater
than zero, then this function will return EFI_TIMEOUT
if the time required to execute the receive data command
is greater than Timeout.
@param SecurityProtocolId The value of the "Security Protocol" parameter of
the security protocol command to be sent.
@param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
of the security protocol command to be sent.
@param PayloadBufferSize Size in bytes of the payload data buffer.
@param PayloadBuffer A pointer to a destination buffer to store the security
protocol command specific payload data for the security
protocol command.
@retval EFI_SUCCESS The security protocol command completed successfully.
@retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
@retval EFI_DEVICE_ERROR The security protocol command completed with an error.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
@retval EFI_TIMEOUT A timeout occurred while waiting for the security
protocol command to execute.
**/
EFI_STATUS
EFIAPI
EmmcSecurityProtocolOut (
IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
IN UINT32 MediaId,
IN UINT64 Timeout,
IN UINT8 SecurityProtocolId,
IN UINT16 SecurityProtocolSpecificData,
IN UINTN PayloadBufferSize,
IN VOID *PayloadBuffer
);
/**
Erase a specified number of device blocks.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the erase request is for.
@param[in] Lba The starting logical block address to be
erased. The caller is responsible for erasing
only legitimate locations.
@param[in, out] Token A pointer to the token associated with the
transaction.
@param[in] Size The size in bytes to be erased. This must be
a multiple of the physical block size of the
device.
@retval EFI_SUCCESS The erase request was queued if Event is not
NULL. The data was erased correctly to the
device if the Event is NULL.to the device.
@retval EFI_WRITE_PROTECTED The device cannot be erased due to write
protection.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the erase operation.
@retval EFI_INVALID_PARAMETER The erase request contains LBAs that are not
valid.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
**/
EFI_STATUS
EFIAPI
EmmcEraseBlocks (
IN EFI_ERASE_BLOCK_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_ERASE_BLOCK_TOKEN *Token,
IN UINTN Size
);
#endif
Reference in New Issue View Git Blame Copy Permalink