mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-12-25 16:37:42 +01:00
375 lines
15 KiB
C
375 lines
15 KiB
C
/** @file
|
|
Header file for AHCI mode of ATA host controller.
|
|
|
|
Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
#ifndef __ATA_HC_AHCI_MODE_H__
|
|
#define __ATA_HC_AHCI_MODE_H__
|
|
|
|
#define EFI_AHCI_BAR_INDEX 0x05
|
|
|
|
#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
|
|
#define EFI_AHCI_CAP_SAM BIT18
|
|
#define EFI_AHCI_CAP_SSS BIT27
|
|
#define EFI_AHCI_CAP_S64A BIT31
|
|
#define EFI_AHCI_GHC_OFFSET 0x0004
|
|
#define EFI_AHCI_GHC_RESET BIT0
|
|
#define EFI_AHCI_GHC_IE BIT1
|
|
#define EFI_AHCI_GHC_ENABLE BIT31
|
|
#define EFI_AHCI_IS_OFFSET 0x0008
|
|
#define EFI_AHCI_PI_OFFSET 0x000C
|
|
|
|
#define EFI_AHCI_MAX_PORTS 32
|
|
|
|
typedef struct {
|
|
UINT32 Lower32;
|
|
UINT32 Upper32;
|
|
} DATA_32;
|
|
|
|
typedef union {
|
|
DATA_32 Uint32;
|
|
UINT64 Uint64;
|
|
} DATA_64;
|
|
|
|
//
|
|
// Refer SATA1.0a spec section 5.2, the Phy detection time should be less than 10ms.
|
|
//
|
|
#define EFI_AHCI_BUS_PHY_DETECT_TIMEOUT 10
|
|
//
|
|
// Refer SATA1.0a spec, the FIS enable time should be less than 500ms.
|
|
//
|
|
#define EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT EFI_TIMER_PERIOD_MILLISECONDS(500)
|
|
//
|
|
// Refer SATA1.0a spec, the bus reset time should be less than 1s.
|
|
//
|
|
#define EFI_AHCI_BUS_RESET_TIMEOUT EFI_TIMER_PERIOD_SECONDS(1)
|
|
|
|
#define EFI_AHCI_ATAPI_DEVICE_SIG 0xEB140000
|
|
#define EFI_AHCI_ATA_DEVICE_SIG 0x00000000
|
|
#define EFI_AHCI_PORT_MULTIPLIER_SIG 0x96690000
|
|
#define EFI_AHCI_ATAPI_SIG_MASK 0xFFFF0000
|
|
|
|
//
|
|
// Each PRDT entry can point to a memory block up to 4M byte
|
|
//
|
|
#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
|
|
|
|
#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
|
|
#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
|
|
#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
|
|
#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
|
|
#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
|
|
#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
|
|
#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA Setup FIS - Bi-directional
|
|
#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
|
|
#define EFI_AHCI_FIS_DATA 0x46 //Data FIS - Bi-directional
|
|
#define EFI_AHCI_FIS_BIST 0x58 //BIST Activate FIS - Bi-directional
|
|
#define EFI_AHCI_FIS_BIST_LENGTH 12
|
|
#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup FIS - Device to Host
|
|
#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
|
|
#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device Bits FIS - Device to Host
|
|
#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
|
|
|
|
#define EFI_AHCI_D2H_FIS_OFFSET 0x40
|
|
#define EFI_AHCI_DMA_FIS_OFFSET 0x00
|
|
#define EFI_AHCI_PIO_FIS_OFFSET 0x20
|
|
#define EFI_AHCI_SDB_FIS_OFFSET 0x58
|
|
#define EFI_AHCI_FIS_TYPE_MASK 0xFF
|
|
#define EFI_AHCI_U_FIS_OFFSET 0x60
|
|
|
|
//
|
|
// Port register
|
|
//
|
|
#define EFI_AHCI_PORT_START 0x0100
|
|
#define EFI_AHCI_PORT_REG_WIDTH 0x0080
|
|
#define EFI_AHCI_PORT_CLB 0x0000
|
|
#define EFI_AHCI_PORT_CLBU 0x0004
|
|
#define EFI_AHCI_PORT_FB 0x0008
|
|
#define EFI_AHCI_PORT_FBU 0x000C
|
|
#define EFI_AHCI_PORT_IS 0x0010
|
|
#define EFI_AHCI_PORT_IS_DHRS BIT0
|
|
#define EFI_AHCI_PORT_IS_PSS BIT1
|
|
#define EFI_AHCI_PORT_IS_SSS BIT2
|
|
#define EFI_AHCI_PORT_IS_SDBS BIT3
|
|
#define EFI_AHCI_PORT_IS_UFS BIT4
|
|
#define EFI_AHCI_PORT_IS_DPS BIT5
|
|
#define EFI_AHCI_PORT_IS_PCS BIT6
|
|
#define EFI_AHCI_PORT_IS_DIS BIT7
|
|
#define EFI_AHCI_PORT_IS_PRCS BIT22
|
|
#define EFI_AHCI_PORT_IS_IPMS BIT23
|
|
#define EFI_AHCI_PORT_IS_OFS BIT24
|
|
#define EFI_AHCI_PORT_IS_INFS BIT26
|
|
#define EFI_AHCI_PORT_IS_IFS BIT27
|
|
#define EFI_AHCI_PORT_IS_HBDS BIT28
|
|
#define EFI_AHCI_PORT_IS_HBFS BIT29
|
|
#define EFI_AHCI_PORT_IS_TFES BIT30
|
|
#define EFI_AHCI_PORT_IS_CPDS BIT31
|
|
#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
|
|
#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
|
|
|
|
#define EFI_AHCI_PORT_IE 0x0014
|
|
#define EFI_AHCI_PORT_CMD 0x0018
|
|
#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
|
|
#define EFI_AHCI_PORT_CMD_ST BIT0
|
|
#define EFI_AHCI_PORT_CMD_SUD BIT1
|
|
#define EFI_AHCI_PORT_CMD_POD BIT2
|
|
#define EFI_AHCI_PORT_CMD_CLO BIT3
|
|
#define EFI_AHCI_PORT_CMD_CR BIT15
|
|
#define EFI_AHCI_PORT_CMD_FRE BIT4
|
|
#define EFI_AHCI_PORT_CMD_FR BIT14
|
|
#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
|
|
#define EFI_AHCI_PORT_CMD_PMA BIT17
|
|
#define EFI_AHCI_PORT_CMD_HPCP BIT18
|
|
#define EFI_AHCI_PORT_CMD_MPSP BIT19
|
|
#define EFI_AHCI_PORT_CMD_CPD BIT20
|
|
#define EFI_AHCI_PORT_CMD_ESP BIT21
|
|
#define EFI_AHCI_PORT_CMD_ATAPI BIT24
|
|
#define EFI_AHCI_PORT_CMD_DLAE BIT25
|
|
#define EFI_AHCI_PORT_CMD_ALPE BIT26
|
|
#define EFI_AHCI_PORT_CMD_ASP BIT27
|
|
#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
|
|
#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
|
|
#define EFI_AHCI_PORT_TFD 0x0020
|
|
#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
|
|
#define EFI_AHCI_PORT_TFD_BSY BIT7
|
|
#define EFI_AHCI_PORT_TFD_DRQ BIT3
|
|
#define EFI_AHCI_PORT_TFD_ERR BIT0
|
|
#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
|
|
#define EFI_AHCI_PORT_SIG 0x0024
|
|
#define EFI_AHCI_PORT_SSTS 0x0028
|
|
#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
|
|
#define EFI_AHCI_PORT_SSTS_DET 0x0001
|
|
#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
|
|
#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
|
|
#define EFI_AHCI_PORT_SCTL 0x002C
|
|
#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
|
|
#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
|
|
#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
|
|
#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
|
|
#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
|
|
#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
|
|
#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
|
|
#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
|
|
#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
|
|
#define EFI_AHCI_PORT_SERR 0x0030
|
|
#define EFI_AHCI_PORT_SERR_RDIE BIT0
|
|
#define EFI_AHCI_PORT_SERR_RCE BIT1
|
|
#define EFI_AHCI_PORT_SERR_TDIE BIT8
|
|
#define EFI_AHCI_PORT_SERR_PCDIE BIT9
|
|
#define EFI_AHCI_PORT_SERR_PE BIT10
|
|
#define EFI_AHCI_PORT_SERR_IE BIT11
|
|
#define EFI_AHCI_PORT_SERR_PRC BIT16
|
|
#define EFI_AHCI_PORT_SERR_PIE BIT17
|
|
#define EFI_AHCI_PORT_SERR_CW BIT18
|
|
#define EFI_AHCI_PORT_SERR_BDE BIT19
|
|
#define EFI_AHCI_PORT_SERR_DE BIT20
|
|
#define EFI_AHCI_PORT_SERR_CRCE BIT21
|
|
#define EFI_AHCI_PORT_SERR_HE BIT22
|
|
#define EFI_AHCI_PORT_SERR_LSE BIT23
|
|
#define EFI_AHCI_PORT_SERR_TSTE BIT24
|
|
#define EFI_AHCI_PORT_SERR_UFT BIT25
|
|
#define EFI_AHCI_PORT_SERR_EX BIT26
|
|
#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
|
|
#define EFI_AHCI_PORT_SACT 0x0034
|
|
#define EFI_AHCI_PORT_CI 0x0038
|
|
#define EFI_AHCI_PORT_SNTF 0x003C
|
|
|
|
|
|
#pragma pack(1)
|
|
//
|
|
// Command List structure includes total 32 entries.
|
|
// The entry data structure is listed at the following.
|
|
//
|
|
typedef struct {
|
|
UINT32 AhciCmdCfl:5; //Command FIS Length
|
|
UINT32 AhciCmdA:1; //ATAPI
|
|
UINT32 AhciCmdW:1; //Write
|
|
UINT32 AhciCmdP:1; //Prefetchable
|
|
UINT32 AhciCmdR:1; //Reset
|
|
UINT32 AhciCmdB:1; //BIST
|
|
UINT32 AhciCmdC:1; //Clear Busy upon R_OK
|
|
UINT32 AhciCmdRsvd:1;
|
|
UINT32 AhciCmdPmp:4; //Port Multiplier Port
|
|
UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
|
|
UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
|
|
UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
|
|
UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
|
|
UINT32 AhciCmdRsvd1[4];
|
|
} EFI_AHCI_COMMAND_LIST;
|
|
|
|
//
|
|
// This is a software constructed FIS.
|
|
// For data transfer operations, this is the H2D Register FIS format as
|
|
// specified in the Serial ATA Revision 2.6 specification.
|
|
//
|
|
typedef struct {
|
|
UINT8 AhciCFisType;
|
|
UINT8 AhciCFisPmNum:4;
|
|
UINT8 AhciCFisRsvd:1;
|
|
UINT8 AhciCFisRsvd1:1;
|
|
UINT8 AhciCFisRsvd2:1;
|
|
UINT8 AhciCFisCmdInd:1;
|
|
UINT8 AhciCFisCmd;
|
|
UINT8 AhciCFisFeature;
|
|
UINT8 AhciCFisSecNum;
|
|
UINT8 AhciCFisClyLow;
|
|
UINT8 AhciCFisClyHigh;
|
|
UINT8 AhciCFisDevHead;
|
|
UINT8 AhciCFisSecNumExp;
|
|
UINT8 AhciCFisClyLowExp;
|
|
UINT8 AhciCFisClyHighExp;
|
|
UINT8 AhciCFisFeatureExp;
|
|
UINT8 AhciCFisSecCount;
|
|
UINT8 AhciCFisSecCountExp;
|
|
UINT8 AhciCFisRsvd3;
|
|
UINT8 AhciCFisControl;
|
|
UINT8 AhciCFisRsvd4[4];
|
|
UINT8 AhciCFisRsvd5[44];
|
|
} EFI_AHCI_COMMAND_FIS;
|
|
|
|
//
|
|
// ACMD: ATAPI command (12 or 16 bytes)
|
|
//
|
|
typedef struct {
|
|
UINT8 AtapiCmd[0x10];
|
|
} EFI_AHCI_ATAPI_COMMAND;
|
|
|
|
//
|
|
// Physical Region Descriptor Table includes up to 65535 entries
|
|
// The entry data structure is listed at the following.
|
|
// the actual entry number comes from the PRDTL field in the command
|
|
// list entry for this command slot.
|
|
//
|
|
typedef struct {
|
|
UINT32 AhciPrdtDba; //Data Base Address
|
|
UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
|
|
UINT32 AhciPrdtRsvd;
|
|
UINT32 AhciPrdtDbc:22; //Data Byte Count
|
|
UINT32 AhciPrdtRsvd1:9;
|
|
UINT32 AhciPrdtIoc:1; //Interrupt on Completion
|
|
} EFI_AHCI_COMMAND_PRDT;
|
|
|
|
//
|
|
// Command table data strucute which is pointed to by the entry in the command list
|
|
//
|
|
typedef struct {
|
|
EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
|
|
EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
|
|
UINT8 Reserved[0x30];
|
|
//
|
|
// AtaPassThruPassThru restricts buffer size to 2^25,
|
|
// so need at most 8 buffers of size EFI_AHCI_MAX_DATA_PER_PRDT
|
|
//
|
|
EFI_AHCI_COMMAND_PRDT PrdtTable[8]; // The scatter/gather list for data transfer
|
|
} EFI_AHCI_COMMAND_TABLE;
|
|
|
|
//
|
|
// Received FIS structure
|
|
//
|
|
typedef struct {
|
|
UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
|
|
UINT8 AhciDmaSetupFisRsvd[0x04];
|
|
UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
|
|
UINT8 AhciPioSetupFisRsvd[0x0C];
|
|
UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
|
|
UINT8 AhciD2HRegisterFisRsvd[0x04];
|
|
UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
|
|
UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
|
|
UINT8 AhciUnknownFisRsvd[0x60];
|
|
} EFI_AHCI_RECEIVED_FIS;
|
|
|
|
#pragma pack()
|
|
|
|
typedef struct {
|
|
EFI_AHCI_RECEIVED_FIS *AhciRFis;
|
|
EFI_AHCI_COMMAND_LIST *AhciCmdList;
|
|
EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
|
|
EFI_AHCI_RECEIVED_FIS *AhciRFisPciAddr;
|
|
EFI_AHCI_COMMAND_LIST *AhciCmdListPciAddr;
|
|
EFI_AHCI_COMMAND_TABLE *AhciCommandTablePciAddr;
|
|
UINT64 MaxCommandListSize;
|
|
UINT64 MaxCommandTableSize;
|
|
UINT64 MaxReceiveFisSize;
|
|
VOID *MapRFis;
|
|
VOID *MapCmdList;
|
|
VOID *MapCommandTable;
|
|
} EFI_AHCI_REGISTERS;
|
|
|
|
/**
|
|
This function is used to send out ATAPI commands conforms to the Packet Command
|
|
with PIO Protocol.
|
|
|
|
@param PciIo The PCI IO protocol instance.
|
|
@param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
|
|
@param Port The number of port.
|
|
@param PortMultiplier The number of port multiplier.
|
|
@param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
|
|
|
|
@retval EFI_SUCCESS send out the ATAPI packet command successfully
|
|
and device sends data successfully.
|
|
@retval EFI_DEVICE_ERROR the device failed to send data.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
AhciPacketCommandExecute (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN EFI_AHCI_REGISTERS *AhciRegisters,
|
|
IN UINT8 Port,
|
|
IN UINT8 PortMultiplier,
|
|
IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
|
|
);
|
|
|
|
/**
|
|
Start command for give slot on specific port.
|
|
|
|
@param PciIo The PCI IO protocol instance.
|
|
@param Port The number of port.
|
|
@param CommandSlot The number of CommandSlot.
|
|
@param Timeout The timeout value of start, uses 100ns as a unit.
|
|
|
|
@retval EFI_DEVICE_ERROR The command start unsuccessfully.
|
|
@retval EFI_TIMEOUT The operation is time out.
|
|
@retval EFI_SUCCESS The command start successfully.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
AhciStartCommand (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN UINT8 Port,
|
|
IN UINT8 CommandSlot,
|
|
IN UINT64 Timeout
|
|
);
|
|
|
|
/**
|
|
Stop command running for giving port
|
|
|
|
@param PciIo The PCI IO protocol instance.
|
|
@param Port The number of port.
|
|
@param Timeout The timeout value of stop, uses 100ns as a unit.
|
|
|
|
@retval EFI_DEVICE_ERROR The command stop unsuccessfully.
|
|
@retval EFI_TIMEOUT The operation is time out.
|
|
@retval EFI_SUCCESS The command stop successfully.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
AhciStopCommand (
|
|
IN EFI_PCI_IO_PROTOCOL *PciIo,
|
|
IN UINT8 Port,
|
|
IN UINT64 Timeout
|
|
);
|
|
|
|
#endif
|
|
|