mirror of
https://github.com/CloverHackyColor/CloverBootloader.git
synced 2024-12-01 12:53:27 +01:00
286 lines
10 KiB
Markdown
286 lines
10 KiB
Markdown
SSL tests
|
|
=========
|
|
|
|
SSL testcases are configured in the `ssl-tests` directory.
|
|
|
|
Each `ssl_*.cnf.in` file contains a number of test configurations. These files
|
|
are used to generate testcases in the OpenSSL CONF format.
|
|
|
|
The precise test output can be dependent on the library configuration. The test
|
|
harness generates the output files on the fly.
|
|
|
|
However, for verification, we also include checked-in configuration outputs
|
|
corresponding to the default configuration. These testcases live in
|
|
`test/ssl-tests/*.cnf` files.
|
|
|
|
For more details, see `ssl-tests/01-simple.cnf.in` for an example.
|
|
|
|
Configuring the test
|
|
--------------------
|
|
|
|
First, give your test a name. The names do not have to be unique.
|
|
|
|
An example test input looks like this:
|
|
|
|
{
|
|
name => "test-default",
|
|
server => { "CipherString" => "DEFAULT" },
|
|
client => { "CipherString" => "DEFAULT" },
|
|
test => { "ExpectedResult" => "Success" },
|
|
}
|
|
|
|
The test section supports the following options
|
|
|
|
### Test mode
|
|
|
|
* Method - the method to test. One of DTLS or TLS.
|
|
|
|
* HandshakeMode - which handshake flavour to test:
|
|
- Simple - plain handshake (default)
|
|
- Resume - test resumption
|
|
- RenegotiateServer - test server initiated renegotiation
|
|
- RenegotiateClient - test client initiated renegotiation
|
|
|
|
When HandshakeMode is Resume or Renegotiate, the original handshake is expected
|
|
to succeed. All configured test expectations are verified against the second
|
|
handshake.
|
|
|
|
* ApplicationData - amount of application data bytes to send (integer, defaults
|
|
to 256 bytes). Applies to both client and server. Application data is sent in
|
|
64kB chunks (but limited by MaxFragmentSize and available parallelization, see
|
|
below).
|
|
|
|
* MaxFragmentSize - maximum send fragment size (integer, defaults to 512 in
|
|
tests - see `SSL_CTX_set_max_send_fragment` for documentation). Applies to
|
|
both client and server. Lowering the fragment size will split handshake and
|
|
application data up between more `SSL_write` calls, thus allowing to exercise
|
|
different code paths. In particular, if the buffer size (64kB) is at least
|
|
four times as large as the maximum fragment, interleaved multi-buffer crypto
|
|
implementations may be used on some platforms.
|
|
|
|
### Test expectations
|
|
|
|
* ExpectedResult - expected handshake outcome. One of
|
|
- Success - handshake success
|
|
- ServerFail - serverside handshake failure
|
|
- ClientFail - clientside handshake failure
|
|
- InternalError - some other error
|
|
|
|
* ExpectedClientAlert, ExpectedServerAlert - expected alert. See
|
|
`test/helpers/ssl_test_ctx.c` for known values. Note: the expected alert is currently
|
|
matched against the _last_ received alert (i.e., a fatal alert or a
|
|
`close_notify`). Warning alert expectations are not yet supported. (A warning
|
|
alert will not be correctly matched, if followed by a `close_notify` or
|
|
another alert.)
|
|
|
|
* ExpectedProtocol - expected negotiated protocol. One of
|
|
SSLv3, TLSv1, TLSv1.1, TLSv1.2.
|
|
|
|
* SessionTicketExpected - whether or not a session ticket is expected
|
|
- Ignore - do not check for a session ticket (default)
|
|
- Yes - a session ticket is expected
|
|
- No - a session ticket is not expected
|
|
|
|
* SessionIdExpected - whether or not a session id is expected
|
|
- Ignore - do not check for a session id (default)
|
|
- Yes - a session id is expected
|
|
- No - a session id is not expected
|
|
|
|
* ResumptionExpected - whether or not resumption is expected (Resume mode only)
|
|
- Yes - resumed handshake
|
|
- No - full handshake (default)
|
|
|
|
* ExpectedNPNProtocol, ExpectedALPNProtocol - NPN and ALPN expectations.
|
|
|
|
* ExpectedTmpKeyType - the expected algorithm or curve of server temp key
|
|
|
|
* ExpectedServerCertType, ExpectedClientCertType - the expected algorithm or
|
|
curve of server or client certificate
|
|
|
|
* ExpectedServerSignHash, ExpectedClientSignHash - the expected
|
|
signing hash used by server or client certificate
|
|
|
|
* ExpectedServerSignType, ExpectedClientSignType - the expected
|
|
signature type used by server or client when signing messages
|
|
|
|
* ExpectedClientCANames - for client auth list of CA names the server must
|
|
send. If this is "empty" the list is expected to be empty otherwise it
|
|
is a file of certificates whose subject names form the list.
|
|
|
|
* ExpectedServerCANames - list of CA names the client must send, TLS 1.3 only.
|
|
If this is "empty" the list is expected to be empty otherwise it is a file
|
|
of certificates whose subject names form the list.
|
|
|
|
Configuring the client and server
|
|
---------------------------------
|
|
|
|
The client and server configurations can be any valid `SSL_CTX`
|
|
configurations. For details, see the manpages for `SSL_CONF_cmd`.
|
|
|
|
Give your configurations as a dictionary of CONF commands, e.g.
|
|
|
|
server => {
|
|
"CipherString" => "DEFAULT",
|
|
"MinProtocol" => "TLSv1",
|
|
}
|
|
|
|
The following sections may optionally be defined:
|
|
|
|
* server2 - this section configures a secondary context that is selected via the
|
|
ServerName test option. This context is used whenever a ServerNameCallback is
|
|
specified. If the server2 section is not present, then the configuration
|
|
matches server.
|
|
* resume_server - this section configures the client to resume its session
|
|
against a different server. This context is used whenever HandshakeMode is
|
|
Resume. If the resume_server section is not present, then the configuration
|
|
matches server.
|
|
* resume_client - this section configures the client to resume its session with
|
|
a different configuration. In practice this may occur when, for example,
|
|
upgraded clients reuse sessions persisted on disk. This context is used
|
|
whenever HandshakeMode is Resume. If the resume_client section is not present,
|
|
then the configuration matches client.
|
|
|
|
### Configuring callbacks and additional options
|
|
|
|
Additional handshake settings can be configured in the `extra` section of each
|
|
client and server:
|
|
|
|
client => {
|
|
"CipherString" => "DEFAULT",
|
|
extra => {
|
|
"ServerName" => "server2",
|
|
}
|
|
}
|
|
|
|
#### Supported client-side options
|
|
|
|
* ClientVerifyCallback - the client's custom certificate verify callback.
|
|
Used to test callback behaviour. One of
|
|
- None - no custom callback (default)
|
|
- AcceptAll - accepts all certificates.
|
|
- RejectAll - rejects all certificates.
|
|
|
|
* ServerName - the server the client should attempt to connect to. One of
|
|
- None - do not use SNI (default)
|
|
- server1 - the initial context
|
|
- server2 - the secondary context
|
|
- invalid - an unknown context
|
|
|
|
* CTValidation - Certificate Transparency validation strategy. One of
|
|
- None - no validation (default)
|
|
- Permissive - SSL_CT_VALIDATION_PERMISSIVE
|
|
- Strict - SSL_CT_VALIDATION_STRICT
|
|
|
|
#### Supported server-side options
|
|
|
|
* ServerNameCallback - the SNI switching callback to use
|
|
- None - no callback (default)
|
|
- IgnoreMismatch - continue the handshake on SNI mismatch
|
|
- RejectMismatch - abort the handshake on SNI mismatch
|
|
|
|
* BrokenSessionTicket - a special test case where the session ticket callback
|
|
does not initialize crypto.
|
|
- No (default)
|
|
- Yes
|
|
|
|
#### Mutually supported options
|
|
|
|
* NPNProtocols, ALPNProtocols - NPN and ALPN settings. Server and client
|
|
protocols can be specified as a comma-separated list, and a callback with the
|
|
recommended behaviour will be installed automatically.
|
|
|
|
* SRPUser, SRPPassword - SRP settings. For client, this is the SRP user to
|
|
connect as; for server, this is a known SRP user.
|
|
|
|
### Default server and client configurations
|
|
|
|
The default server certificate and CA files are added to the configurations
|
|
automatically. Server certificate verification is requested by default.
|
|
|
|
You can override these options by redefining them:
|
|
|
|
client => {
|
|
"VerifyCAFile" => "/path/to/custom/file"
|
|
}
|
|
|
|
or by deleting them
|
|
|
|
client => {
|
|
"VerifyCAFile" => undef
|
|
}
|
|
|
|
Adding a test to the test harness
|
|
---------------------------------
|
|
|
|
1. Add a new test configuration to `test/ssl-tests`, following the examples of
|
|
existing `*.cnf.in` files (for example, `01-simple.cnf.in`).
|
|
|
|
2. Generate the generated `*.cnf` test input file. You can do so by running
|
|
`generate_ssl_tests.pl`:
|
|
|
|
$ ./config
|
|
$ cd test
|
|
$ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
|
|
ssl-tests/my.cnf.in default > ssl-tests/my.cnf
|
|
|
|
where `my.cnf.in` is your test input file and `default` is the provider to use.
|
|
For all the pre-generated test files you should use the default provider.
|
|
|
|
For example, to generate the test cases in `ssl-tests/01-simple.cnf.in`, do
|
|
|
|
$ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
|
|
ssl-tests/01-simple.cnf.in default > ssl-tests/01-simple.cnf
|
|
|
|
Alternatively (hackish but simple), you can comment out
|
|
|
|
unlink glob $tmp_file;
|
|
|
|
in `test/recipes/80-test_ssl_new.t` and run
|
|
|
|
$ make TESTS=test_ssl_new test
|
|
|
|
This will save the generated output in a `*.tmp` file in the build directory.
|
|
|
|
3. Update the number of tests planned in `test/recipes/80-test_ssl_new.t`. If
|
|
the test suite has any skip conditions, update those too (see
|
|
`test/recipes/80-test_ssl_new.t` for details).
|
|
|
|
Running the tests with the test harness
|
|
---------------------------------------
|
|
|
|
HARNESS_VERBOSE=yes make TESTS=test_ssl_new test
|
|
|
|
Running a test manually
|
|
-----------------------
|
|
|
|
These steps are only needed during development. End users should run `make test`
|
|
or follow the instructions above to run the SSL test suite.
|
|
|
|
To run an SSL test manually from the command line, the `TEST_CERTS_DIR`
|
|
environment variable to point to the location of the certs. E.g., from the root
|
|
OpenSSL directory, do
|
|
|
|
$ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs test/ssl_test \
|
|
test/ssl-tests/01-simple.cnf default
|
|
|
|
or for shared builds
|
|
|
|
$ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs \
|
|
util/wrap.pl test/ssl_test test/ssl-tests/01-simple.cnf default
|
|
|
|
In the above examples, `default` is the provider to use.
|
|
|
|
Note that the test expectations sometimes depend on the Configure settings. For
|
|
example, the negotiated protocol depends on the set of available (enabled)
|
|
protocols: a build with `enable-ssl3` has different test expectations than a
|
|
build with `no-ssl3`.
|
|
|
|
The Perl test harness automatically generates expected outputs, so users who
|
|
just run `make test` do not need any extra steps.
|
|
|
|
However, when running a test manually, keep in mind that the repository version
|
|
of the generated `test/ssl-tests/*.cnf` correspond to expected outputs in with
|
|
the default Configure options. To run `ssl_test` manually from the command line
|
|
in a build with a different configuration, you may need to generate the right
|
|
`*.cnf` file from the `*.cnf.in` input first.
|