CloverBootloader/MdeModulePkg/Include/Ppi/UsbIo.h
2019-09-03 12:58:42 +03:00

190 lines
7.5 KiB
C

/** @file
Defines the PEI_USB_IO_PPI that the USB-related PEIM can use for I/O operations
on the USB BUS. This interface enables recovery from a
USB-class storage device, such as USB CD/DVD, USB hard drive, or USB FLASH
drive. These interfaces are modeled on the UEFI 2.3 specification EFI_USB_IO_PROTOCOL.
Refer to section 16.2.4 of the UEFI 2.3 Specification for more information on
these interfaces.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _PEI_USB_IO_PPI_H_
#define _PEI_USB_IO_PPI_H_
#include <Protocol/Usb2HostController.h>
///
/// Global ID for the PEI_USB_IO_PPI.
///
#define PEI_USB_IO_PPI_GUID \
{ \
0x7c29785c, 0x66b9, 0x49fc, { 0xb7, 0x97, 0x1c, 0xa5, 0x55, 0xe, 0xf2, 0x83} \
}
///
/// Forward declaration for the PEI_USB_IO_PPI.
///
typedef struct _PEI_USB_IO_PPI PEI_USB_IO_PPI;
/**
Submits control transfer to a target USB device.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
@param[in] Request A pointer to the USB device request that will be
sent to the USB device.
@param[in] Direction Specifies the data direction for the transfer. There
are three values available:
EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
@param[in] Timeout Indicates the maximum time, in milliseconds, that
the transfer is allowed to complete.
If Timeout is 0, then the caller must wait for the
function to be completed until EFI_SUCCESS or
EFI_DEVICE_ERROR is returned.
@param[in,out] Data A pointer to the buffer of data that will be
transmitted to or received from the USB device.
@param[in] DataLength On input, indicates the size, in bytes, of the data
buffer specified by Data.
@retval EFI_SUCCESS The control transfer was completed successfully.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due
to a lack of resources.
@retval EFI_TIMEOUT The control transfer failed due to timeout.
@retval EFI_DEVICE_ERROR The control transfer failed due to host controller
or device error.
Caller should check TransferResult for detailed
error information.
**/
typedef
EFI_STATUS
(EFIAPI *PEI_USB_CONTROL_TRANSFER)(
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_IO_PPI *This,
IN EFI_USB_DEVICE_REQUEST *Request,
IN EFI_USB_DATA_DIRECTION Direction,
IN UINT32 Timeout,
IN OUT VOID *Data OPTIONAL,
IN UINTN DataLength OPTIONAL
);
/**
Submits bulk transfer to a target USB device.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
@param[in] DeviceEndpoint The endpoint address.
@param[in] Data The data buffer to be transfered.
@param[in] DataLength The length of data buffer.
@param[in] Timeout The timeout for the transfer, in milliseconds.
If Timeout is 0, then the caller must wait for the
function to be completed until EFI_SUCCESS or
EFI_DEVICE_ERROR is returned.
@retval EFI_SUCCESS The bulk transfer completed successfully.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The bulk transfer could not be completed due to
a lack of resources.
@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller
or device error.
Caller should check TransferResult for detailed
error information.
**/
typedef
EFI_STATUS
(EFIAPI *PEI_USB_BULK_TRANSFER)(
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_IO_PPI *This,
IN UINT8 DeviceEndpoint,
IN OUT VOID *Data,
IN OUT UINTN *DataLength,
IN UINTN Timeout
);
/**
Get interface descriptor from a USB device.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
@param[in] InterfaceDescriptor The interface descriptor.
@retval EFI_SUCCESS The interface descriptor was returned.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_DEVICE_ERROR A device error occurred, the function failed to
get the interface descriptor.
**/
typedef
EFI_STATUS
(EFIAPI *PEI_USB_GET_INTERFACE_DESCRIPTOR)(
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_IO_PPI *This,
IN EFI_USB_INTERFACE_DESCRIPTOR **InterfaceDescriptor
);
/**
Get endpoint descriptor from a USB device.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
@param[in] EndPointIndex The index of the end point.
@param[in] EndpointDescriptor The endpoint descriptor.
@retval EFI_SUCCESS The endpoint descriptor was returned.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_DEVICE_ERROR A device error occurred, the function failed to
get the endpoint descriptor.
**/
typedef
EFI_STATUS
(EFIAPI *PEI_USB_GET_ENDPOINT_DESCRIPTOR)(
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_IO_PPI *This,
IN UINT8 EndpointIndex,
IN EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptor
);
/**
Issue a port reset to the device.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
@retval EFI_SUCCESS The port reset was issued successfully.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_DEVICE_ERROR Device error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *PEI_USB_PORT_RESET)(
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_IO_PPI *This
);
///
/// This PPI contains a set of services to interact with the USB host controller.
/// These interfaces are modeled on the UEFI 2.3 specification EFI_USB_IO_PROTOCOL.
/// Refer to section 16.2.4 of the UEFI 2.3 Specification for more information on
/// these interfaces.
///
struct _PEI_USB_IO_PPI {
PEI_USB_CONTROL_TRANSFER UsbControlTransfer;
PEI_USB_BULK_TRANSFER UsbBulkTransfer;
PEI_USB_GET_INTERFACE_DESCRIPTOR UsbGetInterfaceDescriptor;
PEI_USB_GET_ENDPOINT_DESCRIPTOR UsbGetEndpointDescriptor;
PEI_USB_PORT_RESET UsbPortReset;
};
extern EFI_GUID gPeiUsbIoPpiGuid;
#endif