CloverBootloader/NetworkPkg/IScsiDxe/IScsiExtScsiPassThru.c
Sergey Isakov 15dada20e6 sync sources wuth new edk2
Signed-off-by: Sergey Isakov <isakov-sl@bk.ru>
2019-09-04 13:44:38 +03:00

420 lines
16 KiB
C

/** @file
The implementation of EFI_EXT_SCSI_PASS_THRU_PROTOCOL.
Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "IScsiImpl.h"
EFI_EXT_SCSI_PASS_THRU_PROTOCOL gIScsiExtScsiPassThruProtocolTemplate = {
NULL,
IScsiExtScsiPassThruFunction,
IScsiExtScsiPassThruGetNextTargetLun,
IScsiExtScsiPassThruBuildDevicePath,
IScsiExtScsiPassThruGetTargetLun,
IScsiExtScsiPassThruResetChannel,
IScsiExtScsiPassThruResetTargetLun,
IScsiExtScsiPassThruGetNextTarget
};
/**
Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel.
This function supports both blocking I/O and nonblocking I/O. The blocking I/O
functionality is required, and the nonblocking I/O functionality is optional.
@param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param[in] Target The Target is an array of size TARGET_MAX_BYTES and it
represents the id of the SCSI device to send the SCSI
Request Packet. Each transport driver may choose to
utilize a subset of this size to suit the needs
of transport target representation. For example, a
Fibre Channel driver may use only 8 bytes (WWN)
to represent an FC target.
@param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet.
@param[in, out] Packet A pointer to the SCSI Request Packet to send to the
SCSI device specified by Target and Lun.
@param[in] Event If nonblocking I/O is not supported then Event is ignored,
and blocking I/O is performed. If Event is NULL, then
blocking I/O is performed. If Event is not NULL and non
blocking I/O is supported, then nonblocking I/O is performed,
and Event will be signaled when the SCSI Request Packet
completes.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For
bi-directional commands, InTransferLength bytes
were transferred from InDataBuffer.
For write and bi-directional commands, OutTransferLength
bytes were transferred by OutDataBuffer.
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed.
The number of bytes that could be transferred is
returned in InTransferLength. For write and
bi-directional commands, OutTransferLength bytes
were transferred by OutDataBuffer.
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because
there are too many SCSI Request Packets already
queued. The caller may retry later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send
the SCSI Request Packet.
@retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket,
are invalid.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
is not supported by the host adapter.
This includes the case of Bi-directional SCSI
commands not supported by the implementation.
The SCSI Request Packet was not sent,
so no additional status information is available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruFunction (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
EFI_STATUS Status;
ISCSI_DRIVER_DATA *Private;
if (Target[0] != 0) {
return EFI_INVALID_PARAMETER;
}
if ((Packet == NULL) || (Packet->Cdb == NULL)) {
return EFI_INVALID_PARAMETER;
}
Status = IScsiExecuteScsiCommand (This, Target, Lun, Packet);
if ((Status != EFI_SUCCESS) && (Status != EFI_NOT_READY)) {
//
// Try to reinstate the session and re-execute the Scsi command.
//
Private = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
if (EFI_ERROR (IScsiSessionReinstatement (Private->Session))) {
return EFI_DEVICE_ERROR;
}
Status = IScsiExecuteScsiCommand (This, Target, Lun, Packet);
}
return Status;
}
/**
Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on
a SCSI channel. These can either be the list SCSI devices that are actually
present on the SCSI channel, or the list of legal Target Ids and LUNs for the
SCSI channel. Regardless, the caller of this function must probe the Target ID
and LUN returned to see if a SCSI device is actually present at that location
on the SCSI channel.
@param[in] This The EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param[in, out] Target On input, a pointer to the Target ID of a SCSI
device present on the SCSI channel. On output, a
pointer to the Target ID of the next SCSI device
present on a SCSI channel. An input value of
0xFFFFFFFF retrieves the Target ID of the first
SCSI device present on a SCSI channel.
@param[in, out] Lun On input, a pointer to the LUN of a SCSI device
present on the SCSI channel. On output, a pointer
to the LUN of the next SCSI device present on a
SCSI channel.
@retval EFI_SUCCESS The Target ID and Lun of the next SCSI device on
the SCSI channel was returned in Target and Lun.
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI
channel.
@retval EFI_INVALID_PARAMETER Target is not 0xFFFFFFFF,and Target and Lun were
not returned on a previous call to
GetNextDevice().
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetNextTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **Target,
IN OUT UINT64 *Lun
)
{
ISCSI_DRIVER_DATA *Private;
ISCSI_SESSION_CONFIG_NVDATA *ConfigNvData;
UINT8 TargetId[TARGET_MAX_BYTES];
Private = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
ConfigNvData = &Private->Session->ConfigData->SessionConfigData;
if ((*Target)[0] == 0 && (CompareMem (Lun, ConfigNvData->BootLun, sizeof (UINT64)) == 0)) {
//
// Only one <Target, Lun> pair per iSCSI Driver instance.
//
return EFI_NOT_FOUND;
}
SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);
if (CompareMem (*Target, TargetId, TARGET_MAX_BYTES) == 0) {
(*Target)[0] = 0;
CopyMem (Lun, ConfigNvData->BootLun, sizeof (UINT64));
return EFI_SUCCESS;
}
return EFI_INVALID_PARAMETER;
}
/**
Allocate and build a device path node for a SCSI device on a SCSI channel.
@param[in] This Protocol instance pointer.
@param[in] Target The Target ID of the SCSI device for which a
device path node is to be allocated and built.
@param[in] Lun The LUN of the SCSI device for which a device
path node is to be allocated and built.
@param[in, out] DevicePath A pointer to a single device path node that
describes the SCSI device specified by Target and
Lun. This function is responsible for allocating
the buffer DevicePath with the boot service
AllocatePool(). It is the caller's
responsibility to free DevicePath when the caller
is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the SCSI
device specified by Target and Lun was allocated
and returned in DevicePath.
@retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does
not exist on the SCSI channel.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate
DevicePath.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruBuildDevicePath (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
ISCSI_DRIVER_DATA *Private;
ISCSI_SESSION *Session;
ISCSI_SESSION_CONFIG_NVDATA *ConfigNvData;
ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfig;
EFI_DEV_PATH *Node;
UINTN DevPathNodeLen;
if (DevicePath == NULL) {
return EFI_INVALID_PARAMETER;
}
if (Target[0] != 0) {
return EFI_NOT_FOUND;
}
Private = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
Session = Private->Session;
ConfigNvData = &Session->ConfigData->SessionConfigData;
AuthConfig = Session->AuthData.CHAP.AuthConfig;
if (CompareMem (&Lun, ConfigNvData->BootLun, sizeof (UINT64)) != 0) {
return EFI_NOT_FOUND;
}
DevPathNodeLen = sizeof (ISCSI_DEVICE_PATH) + AsciiStrLen (ConfigNvData->TargetName) + 1;
Node = AllocateZeroPool (DevPathNodeLen);
if (Node == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Node->DevPath.Type = MESSAGING_DEVICE_PATH;
Node->DevPath.SubType = MSG_ISCSI_DP;
SetDevicePathNodeLength (&Node->DevPath, DevPathNodeLen);
//
// 0 for TCP, others are reserved.
//
Node->Iscsi.NetworkProtocol = 0;
Node->Iscsi.LoginOption = 0;
switch (Session->AuthType) {
case ISCSI_AUTH_TYPE_NONE:
Node->Iscsi.LoginOption |= 0x0800;
break;
case ISCSI_AUTH_TYPE_CHAP:
//
// Bit12: 0=CHAP_BI, 1=CHAP_UNI
//
if (AuthConfig->CHAPType == ISCSI_CHAP_UNI) {
Node->Iscsi.LoginOption |= 0x1000;
}
break;
default:
break;
}
CopyMem (&Node->Iscsi.Lun, ConfigNvData->BootLun, sizeof (UINT64));
Node->Iscsi.TargetPortalGroupTag = Session->TargetPortalGroupTag;
AsciiStrCpyS ((CHAR8 *) Node + sizeof (ISCSI_DEVICE_PATH), AsciiStrLen (ConfigNvData->TargetName) + 1, ConfigNvData->TargetName);
*DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) Node;
return EFI_SUCCESS;
}
/**
Translate a device path node to a Target ID and LUN.
@param[in] This Protocol instance pointer.
@param[in] DevicePath A pointer to the device path node that describes
a SCSI device on the SCSI channel.
@param[out] Target A pointer to the Target ID of a SCSI device on
the SCSI channel.
@param[out] Lun A pointer to the LUN of a SCSI device on the SCSI
channel.
@retval EFI_SUCCESS DevicePath was successfully translated to a
Target ID and LUN, and they were returned in
Target and Lun.
@retval EFI_INVALID_PARAMETER DevicePath/Target/Lun is NULL.
@retval EFI_UNSUPPORTED This driver does not support the device path node
type in DevicePath.
@retval EFI_NOT_FOUND A valid translation does not exist from DevicePath
to a TargetID and LUN.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 **Target,
OUT UINT64 *Lun
)
{
ISCSI_DRIVER_DATA *Private;
ISCSI_SESSION_CONFIG_NVDATA *ConfigNvData;
if ((DevicePath == NULL) || (Target == NULL) || (Lun == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
(DevicePath->SubType != MSG_ISCSI_DP) ||
(DevicePathNodeLength (DevicePath) <= sizeof (ISCSI_DEVICE_PATH))
) {
return EFI_UNSUPPORTED;
}
Private = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
ConfigNvData = &Private->Session->ConfigData->SessionConfigData;
SetMem (*Target, TARGET_MAX_BYTES, 0xFF);
(*Target)[0] = 0;
if (AsciiStrCmp (ConfigNvData->TargetName, (CHAR8 *) DevicePath + sizeof (ISCSI_DEVICE_PATH)) != 0) {
return EFI_UNSUPPORTED;
}
CopyMem (Lun, ConfigNvData->BootLun, sizeof (UINT64));
return EFI_SUCCESS;
}
/**
Resets a SCSI channel. This operation resets all the SCSI devices connected to
the SCSI channel.
@param[in] This Protocol instance pointer.
@retval EFI_UNSUPPORTED It is not supported.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruResetChannel (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
)
{
return EFI_UNSUPPORTED;
}
/**
Resets a SCSI device that is connected to a SCSI channel.
@param[in] This Protocol instance pointer.
@param[in] Target The Target ID of the SCSI device to reset.
@param[in] Lun The LUN of the SCSI device to reset.
@retval EFI_UNSUPPORTED It is not supported.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruResetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun
)
{
return EFI_UNSUPPORTED;
}
/**
Retrieve the list of legal Target IDs for SCSI devices on a SCSI channel.
@param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL
instance.
@param[in, out] Target (TARGET_MAX_BYTES) of a SCSI device present on
the SCSI channel. On output, a pointer to the
Target ID (an array of TARGET_MAX_BYTES) of the
next SCSI device present on a SCSI channel.
An input value of 0xF(all bytes in the array are 0xF)
in the Target array retrieves the Target ID of the
first SCSI device present on a SCSI channel.
@retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
channel was returned in Target.
@retval EFI_INVALID_PARAMETER Target or Lun is NULL.
@retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
returned on a previous call to GetNextTarget().
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetNextTarget (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **Target
)
{
UINT8 TargetId[TARGET_MAX_BYTES];
SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);
if (CompareMem (*Target, TargetId, TARGET_MAX_BYTES) == 0) {
(*Target)[0] = 0;
return EFI_SUCCESS;
} else if ((*Target)[0] == 0) {
return EFI_NOT_FOUND;
} else {
return EFI_INVALID_PARAMETER;
}
}