CloverBootloader/Drivers/XhciDxe/UsbHcMem.h

/** @file

  This file contains the definination for host controller memory management routines.

Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _EFI_XHCI_MEM_H_
#define _EFI_XHCI_MEM_H_

#define USB_HC_BIT(a)                  ((UINTN)(1 << (a)))

#define USB_HC_BIT_IS_SET(Data, Bit)   \
          ((BOOLEAN)(((Data) & USB_HC_BIT(Bit)) == USB_HC_BIT(Bit)))

typedef struct _USBHC_MEM_BLOCK USBHC_MEM_BLOCK;
struct _USBHC_MEM_BLOCK {
  UINT8                   *Bits;    // Bit array to record which unit is allocated
  UINTN                   BitsLen;
  UINT8                   *Buf;
  UINT8                   *BufHost;
  UINTN                   BufLen;   // Memory size in bytes
  VOID                    *Mapping;
  USBHC_MEM_BLOCK         *Next;
};

//
// USBHC_MEM_POOL is used to manage the memory used by USB
// host controller. XHCI requires the control memory and transfer
// data to be on the same 4G memory.
//
typedef struct _USBHC_MEM_POOL {
  EFI_PCI_IO_PROTOCOL     *PciIo;
  BOOLEAN                 Check4G;
  UINT32                  Which4G;
  USBHC_MEM_BLOCK         *Head;
} USBHC_MEM_POOL;

//
// Memory allocation unit, must be 2^n, n>4
//
#define USBHC_MEM_UNIT           64

#define USBHC_MEM_UNIT_MASK      (USBHC_MEM_UNIT - 1)
#define USBHC_MEM_DEFAULT_PAGES  16

#define USBHC_MEM_ROUND(Len)  (((Len) + USBHC_MEM_UNIT_MASK) & (~USBHC_MEM_UNIT_MASK))

//
// Advance the byte and bit to the next bit, adjust byte accordingly.
//
#define NEXT_BIT(Byte, Bit)   \
          do {                \
            (Bit)++;          \
            if ((Bit) > 7) {  \
              (Byte)++;       \
              (Bit) = 0;      \
            }                 \
          } while (0)



/**
  Initialize the memory management pool for the host controller.

  @param  PciIo               The PciIo that can be used to access the host controller.

  @retval EFI_SUCCESS         The memory pool is initialized.
  @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool.

**/
USBHC_MEM_POOL *
UsbHcInitMemPool (
  IN EFI_PCI_IO_PROTOCOL  *PciIo
  );


/**
  Release the memory management pool.

  @param   Pool               The USB memory pool to free.

  @retval EFI_SUCCESS       The memory pool is freed.
  @retval EFI_DEVICE_ERROR  Failed to free the memory pool.

**/
EFI_STATUS
UsbHcFreeMemPool (
  IN USBHC_MEM_POOL       *Pool
  );


/**
  Allocate some memory from the host controller's memory pool
  which can be used to communicate with host controller.

  @param  Pool  The host controller's memory pool.
  @param  Size  Size of the memory to allocate.

  @return The allocated memory or NULL.

**/
VOID *
UsbHcAllocateMem (
  IN  USBHC_MEM_POOL      *Pool,
  IN  UINTN               Size
  );


/**
  Free the allocated memory back to the memory pool.

  @param  Pool  The memory pool of the host controller.
  @param  Mem   The memory to free.
  @param  Size  The size of the memory to free.

**/
VOID
UsbHcFreeMem (
  IN USBHC_MEM_POOL       *Pool,
  IN VOID                 *Mem,
  IN UINTN                Size
  );

/**
  Calculate the corresponding pci bus address according to the Mem parameter.

  @param  Pool           The memory pool of the host controller.
  @param  Mem            The pointer to host memory.
  @param  Size           The size of the memory region.

  @return                The pci memory address

**/
EFI_PHYSICAL_ADDRESS
UsbHcGetPciAddrForHostAddr (
  IN USBHC_MEM_POOL       *Pool,
  IN VOID                 *Mem,
  IN UINTN                Size
  );

/**
  Calculate the corresponding host address according to the pci address.

  @param  Pool           The memory pool of the host controller.
  @param  Mem            The pointer to pci memory.
  @param  Size           The size of the memory region.

  @return                The host memory address

**/
EFI_PHYSICAL_ADDRESS
UsbHcGetHostAddrForPciAddr (
  IN USBHC_MEM_POOL       *Pool,
  IN VOID                 *Mem,
  IN UINTN                Size
  );

/**  
  Allocates pages at a specified alignment that are suitable for an EfiPciIoOperationBusMasterCommonBuffer mapping.
  
  If Alignment is not a power of two and Alignment is not zero, then ASSERT().

  @param  PciIo                 The PciIo that can be used to access the host controller.
  @param  Pages                 The number of pages to allocate.
  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
  @param  HostAddress           The system memory address to map to the PCI controller.
  @param  DeviceAddress         The resulting map address for the bus master PCI controller to 
                                use to access the hosts HostAddress.
  @param  Mapping               A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           Success to allocate aligned pages.
  @retval EFI_INVALID_PARAMETER Pages or Alignment is not valid.
  @retval EFI_OUT_OF_RESOURCES  Do not have enough resources to allocate memory.
  

**/
EFI_STATUS
UsbHcAllocateAlignedPages (
  IN EFI_PCI_IO_PROTOCOL    *PciIo,
  IN UINTN                  Pages,
  IN UINTN                  Alignment,
  OUT VOID                  **HostAddress,
  OUT EFI_PHYSICAL_ADDRESS  *DeviceAddress,
  OUT VOID                  **Mapping
  );
  
/**
  Frees memory that was allocated with UsbHcAllocateAlignedPages().
  
  @param  PciIo                 The PciIo that can be used to access the host controller.
  @param  HostAddress           The system memory address to map to the PCI controller.
  @param  Pages                 The number of pages to free.
  @param  Mapping               The mapping value returned from Map().

**/
VOID
UsbHcFreeAlignedPages (
  IN EFI_PCI_IO_PROTOCOL    *PciIo,
  IN VOID                   *HostAddress,
  IN UINTN                  Pages,
  VOID                      *Mapping
  );

#endif