In `populate_options()`, if the theme specified by `WP_DEFAULT_THEME` doesn't exist, fall back to the latest core default theme. If we can't find a core default theme, `WP_DEFAULT_THEME` is the best we can do.
Props nacin, jeremyfelt, dd32.
See #34306.
Built from https://develop.svn.wordpress.org/trunk@35738
git-svn-id: http://core.svn.wordpress.org/trunk@35702 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Keeping myhacks support is a small price to pay for not breaking people's sites. Even if it is very very very few sites, breaking sites isn't something that should be encouraged. Even with 10 years of deprecation notices.
https://core.trac.wordpress.org/ticket/33741#comment:18 outlines all the ways that the hack_file and my-hacks options can be setup and thus all the ways that the removal of those options could break sites.
Fixes#33741.
Built from https://develop.svn.wordpress.org/trunk@35688
git-svn-id: http://core.svn.wordpress.org/trunk@35652 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The network admin email setting for a network is often used as a catch-all or notification email separate from the actual user ID set as the owner of the new network. If a non-user email address is set during network installation, we can defer to the current user as the actual network admin and apply the entered email as the address to which general notifications are sent and emails are sent from.
In the future, we'll want to update the messaging around "Network Admin Email" to reflect its reality. See #34293.
Props jjeaton.
Fixes#34065.
Built from https://develop.svn.wordpress.org/trunk@35575
git-svn-id: http://core.svn.wordpress.org/trunk@35539 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34561] instituted the policy of forcing pagination for comments. This strategy
was intended to avert problems when 'page_comments' is set to 0 - as it is by
default - and the number of comments on a given post rises into the hundreds or
thousands. By forcing pagination in all cases, we ensured that WordPress would
not time out by processing unwieldy numbers of comments on a given pageload.
The strategy proves problematic, however, because comment permalinks are
generated using the page of the comment. Forcing pagination for posts that
were not previously paginated would change the URL of all comments that do not
appear on the default comment page.
This changeset reintroduces the 'page_comments' setting and its corresponding
checkbox on Settings > Discussion. A number of tests, which were written after
[34561], are modified to work now that 'page_comments' will, once again, be
disabled by default.
See #8071.
Built from https://develop.svn.wordpress.org/trunk@35331
git-svn-id: http://core.svn.wordpress.org/trunk@35297 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `_network_option()` parameter order will be changing to accept `$network_id` first. The `_site_option()` functions will remain in use throughout core as our way of retrieving a network option for the current network.
See #28290.
Built from https://develop.svn.wordpress.org/trunk@34912
git-svn-id: http://core.svn.wordpress.org/trunk@34877 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, the 'page_comments' toggle allowed users to disable comment
pagination. This toggle was only superficial, however. Even with
'page_comments' turned on, `comments_template()` loaded all of a post's
comments into memory, and passed them to `wp_list_comments()` and
`Walker_Comment`, the latter of which produced markup for only the
current page of comments. In other words, it was possible to enable
'page_comments', thereby showing only a subset of a post's comments on a given
page, but all comments continued to be loaded in the background. This technique
scaled poorly. Posts with hundreds or thousands of comments would load slowly,
or not at all, even when the 'comments_per_page' setting was set to a
reasonable number.
Recent changesets have addressed this problem through more efficient tree-
walking, better descendant caching, and more selective queries for top-level
post comments. The current changeset completes the project by addressing the
root issue: that loading a post causes all of its comments to be loaded too.
Here's the breakdown:
* Comment pagination is now forced. Setting 'page_comments' to false leads to evil things when you have many comments. If you want to avoid pagination, set 'comments_per_page' to something high.
* The 'page_comments' setting has been expunged from options-discussion.php, and from places in the codebase where it was referenced. For plugins relying on 'page_comments', we now force the value to `true` with a `pre_option` filter.
* `comments_template()` now queries for an appropriately small number of comments. Usually, this means the `comments_per_page` value.
* To preserve the current (odd) behavior for comment pagination links, some unholy hacks have been inserted into `comments_template()`. The ugliness is insulated in this function for backward compatibility and to minimize collateral damage. A side-effect is that, for certain settings of 'default_comments_page', up to 2x the value of `comments_per_page` might be fetched at a time.
* In support of these changes, a `$format` parameter has been added to `WP_Comment::get_children()`. This param allows you to request a flattened array of comment children, suitable for feeding into `Walker_Comment`.
* `WP_Query` loops are now informed about total available comment counts and comment pages by the `WP_Comment_Query` (`found_comments`, `max_num_pages`), instead of by `Walker_Comment`.
Aside from radical performance improvements in the case of a post with many
comments, this changeset fixes a bug that caused the first page of comments to
be partial (`found_comments` % `comments_per_page`), rather than the last, as
you'd expect.
Props boonebgorges, wonderboymusic.
Fixes#8071.
Built from https://develop.svn.wordpress.org/trunk@34561
git-svn-id: http://core.svn.wordpress.org/trunk@34525 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds a new table to the database schema (`wp_termmeta`), and a set of
`*_term_meta()` API functions. `get_terms()` and `wp_get_object_terms()`
now also support 'meta_query' parameters, with syntax identical to other
uses of `WP_Meta_Query`.
When fetching terms via `get_terms()` or `wp_get_object_terms()`, metadata for
matched terms is preloaded into the cache by default. Disable this behavior
by setting the new `$update_term_meta_cache` paramater to `false`.
To maximize performance, within `WP_Query` loops, the termmeta cache is *not*
primed by default. Instead, we use a lazy-loading technique: metadata for all
terms belonging to posts in the loop is loaded into the cache the first time
that `get_term_meta()` is called within the loop.
Props boonebgorges, sirzooro.
See #10142.
Built from https://develop.svn.wordpress.org/trunk@34529
git-svn-id: http://core.svn.wordpress.org/trunk@34493 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For the last 10 years, my-hacks has been deprecated and has been throwing a deprecation notice. For the last six years, you haven't been able to enable my-hacks.php in the admin UI. That should be enough time to give developers notice. Plugins and themes seem like they might have staying power.
Fixes#33741
Props bobbingwide
Built from https://develop.svn.wordpress.org/trunk@34291
git-svn-id: http://core.svn.wordpress.org/trunk@34255 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It's pretty easy to run over the `option_name` length, which causes undefined behaviour when inserting and retrieving options. Increasing the length from `VARCHAR(64)` to `VARCHAR(191)` significantly reduces the risk of this occurring.
Because `option_name` has a `UNIQUE` index, we can only increase it to 191 characters, rather than 255. The index can only use a prefix of 191 characters, so will incorrectly restrict long different strings that have the same prefix, if we make the column longer.
Props scribu, OriginalEXE, khromov, MikeHansenMe, netweb, pento.
Fixes#13310.
Built from https://develop.svn.wordpress.org/trunk@34030
git-svn-id: http://core.svn.wordpress.org/trunk@33999 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When inserting an image into a post, the values in `wp.media.controller.Library` should not default to linking the image when no user settings are present.
The default display setting value for `link` is now `none`. User settings persist and will override or confirm this value based on user actions.
Props liljimmi, janhenckens, eherman24, wonderboymusic.
Fixes#31467.
Built from https://develop.svn.wordpress.org/trunk@33729
git-svn-id: http://core.svn.wordpress.org/trunk@33697 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the first big step to supporting arbitrary domains and paths. In this new approach, sites are detected first where possible, then the network is inferred. Allows filtering for arbitrary path segments, smooths out some weirdness, and removes various restrictions. A sunrise plugin could do much of its work by adding filters, if those are even needed.
see #27003.
Built from https://develop.svn.wordpress.org/trunk@27359
git-svn-id: http://core.svn.wordpress.org/trunk@27209 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Reverts [25416], which had all transients being cleared. This leaves much to be desired, but we don't want a core update to be blamed for breaking a site that incorrectly assumes transients aren't transient.
props dartiss, pento.
fixes#20316.
Built from https://develop.svn.wordpress.org/trunk@25838
git-svn-id: http://core.svn.wordpress.org/trunk@25838 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Reverts [25416], which had all transients being cleared. This leaves much to be desired, but we don't want a core update to be blamed for breaking a site that incorrectly assumes transients aren't transient.
props dartiss, pento.
fixes#20316.
Built from https://develop.svn.wordpress.org/trunk@25838
git-svn-id: http://core.svn.wordpress.org/trunk@25750 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The exceptions to this are update_post_meta() and add_post_meta() which are often used by plugins in POST handlers and will continue accepting slashed data for now.
Introduce wp_upate_post_meta() and wp_add_post_meta() as unslashed alternatives to update_post_meta() and add_post_meta(). These functions could become methods in WP_Post so don't use them too heavily yet.
Remove all escape() calls from wp_xmlrpc_server. Now that core expects unslashed data this is no longer needed.
Remove addslashes(), addslashes_gpc(), add_magic_quotes() calls on data being prepared for handoff to core functions that until now expected slashed data. Adding slashes in no longer necessary.
Introduce wp_unslash() and use to it remove slashes from GPCS data before using it in core API. Almost every instance of stripslashes() in core should now be wp_unslash(). In the future (a release or three) when GPCS is no longer slashed, wp_unslash() will stop stripping slashes and simply return what is passed. At this point wp_unslash() calls can be removed from core.
Introduce wp_slash() for slashing GPCS data. This will also turn into a noop once GPCS is no longer slashed. wp_slash() should almost never be used. It is mainly of use in unit tests.
Plugins should use wp_unslash() on data being passed to core API.
Plugins should no longer slash data being passed to core. So when you get_post() and then wp_insert_post() the post data from get_post() no longer needs addslashes(). Most plugins were not bothering with this. They will magically start doing the right thing. Unfortunately, those few souls who did it properly will now have to avoid calling addslashes() for 3.6 and newer.
Use wp_kses_post() and wp_kses_data(), which expect unslashed data, instead of wp_filter_post_kses() and wp_filter_kses(), which expect slashed data. Filters are no longer passed slashed data.
Remove many no longer necessary calls to $wpdb->escape() and esc_sql().
In wp_get_referer() and wp_get_original_referer(), return unslashed data.
Remove old stripslashes() calls from WP_Widget::update() handlers. These haven't been necessary since WP_Widget.
Switch several queries over to prepare().
Expect something to break.
Props alexkingorg
see #21767
git-svn-id: http://core.svn.wordpress.org/trunk@23416 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove the UI for setting the default width and height for embeds. Width was confusing as it
was blank by default (inheriting the content width from the theme, or 500px). The height is
now calculated as 1.5x the content width, or 1000px, whichever is smaller.
The [embed] shortcode can still receive manual height and width attributes. This just removes
the global settings.
props wonderboymusic. see #21719.
git-svn-id: http://core.svn.wordpress.org/trunk@21998 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Will be replaced with http://wordpress.org/extend/plugins/atom-publishing-protocol/.
* Introduces an action, xmlrpc_rsd_apis, to add APIs to xmlrpc.php?rsd.
* Introduces support for 'error' being 403 and 50x in class-wp.php.
* Removes 'Remote Publishing' from Writing Settings (see [21804]). Keeps the remote_publishing settings section.
DB version is bumped to generate the new wp-app rewrite rule and remove the old enable_app option.
props wonderboymusic.
fixes#21509.
git-svn-id: http://core.svn.wordpress.org/trunk@21818 1a063a9b-81f0-0310-95a4-ce76da25c4cd
props markoheijnen for the initial patch.
Introduces a new filter, xmlrpc_enabled.
Respects any current callbacks registered to the pre_option_enable_xmlrpc
and option_enable_xmlrpc filters, for anyone forcing it off via code.
fixes#21509.
git-svn-id: http://core.svn.wordpress.org/trunk@21804 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Enforce this by denying the 'manage_links' capability, which hides the All Links, Add New Link, and Link Categories screens. Hide WP_Widget_Links and the UI for the default_link_category as well.
Convert all references to 'posts and links' when handling reassignment on user deletion to just 'posts'.
see #21307.
git-svn-id: http://core.svn.wordpress.org/trunk@21501 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This has the benefit of calling WP_Rewrite::init() which correctly resets the permalink_structure
property of the $wp_rewrite global so that the rewrite rules generated on the next flush are correct.
git-svn-id: http://svn.automattic.com/wordpress/trunk@20117 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Getters and Helpers: Introduces a series of methods to allow for easy generation of headers for display, and other theme metadata, including page templates.
* Screenshots: Handles support for multiple screenshots. (see # Additional screenshots must be PNG and start with screenshot-2.png, and be sequential to be counted. see #19816.
* Error Handling: Broken themes have a WP_Error object attached to them.
* Caching: Introduces a wp_cache_themes_persistently filter (also in [20020]) to enable persistent caching of all filesystem and sanitization operations normally handled by WP_Theme (and formerly get_file_data() and get_themes()). Themes are cached individually and across five different cache keys for different data pieces.
* Compatibility: A WP_Theme object is backwards compatible with a theme's array formerly returned by get_themes() and get_theme(), and an stdClass object formerly returned by current_theme_info().
* i18n/L10n: Theme headers are now localizable with proper Text Domain and Domain Path headers, like plugins. (Language packs may remove the requirement for headers.) For page templates, see #6007 (not fixed yet, but will be easy now). For headers, fixes#15858.
* PHP and CSS files: New methods that fetch a list of theme files (for the theme editor) only on demand, rather than only loading them into memory. fixes#11214.
Functions deprecated:
* get_themes(), get_allowed_themes() and get_broken_themes() -- use wp_get_themes()
* get_theme() and current_theme_info() -- use wp_get_theme()
* get_site_allowed_themes() -- use WP_Theme::get_allowed_on_network()
* wpmu_get_blog_allowedthemes() -- use WP_theme::get_allowed_on_site()
see also [20016], [20018], [20019], [20020], [20021], [20022], [20025], [20026], [20027]. also fixes#19244.
see #20103.
git-svn-id: http://svn.automattic.com/wordpress/trunk@20029 1a063a9b-81f0-0310-95a4-ce76da25c4cd
