The html5lib-tests suite parses tests from a number of files with a specific
data format. It uses a dataProvider in a loop that yields test information.
This relies on some variables being reset on each iteration. The context
element has not properly reset on each iteration.
The test specification describes the context element as follows:
a9f44960a9/tree-construction/README.md
> Then there *may* be a line that says "#document-fragment", which must be
> followed by a newline (LF), followed by a string of characters that indicates
> the context element, followed by a newline (LF). If the string of characters
> starts with "svg ", the context element is in the SVG namespace and the
> substring after "svg " is the local name. If the string of characters starts
> with "math ", the context element is in the MathML namespace and the
> substring after "math " is the local name. Otherwise, the context element is
> in the HTML namespace and the string is the local name. If this line is
> present the "#data" must be parsed using the HTML fragment parsing algorithm
> with the context element as context.
Without the proper reset of this value, a single context element would change
subsequent tests, breaking the test suite.
This patch adds the reset to ensure that the test suite works properly.
Developed in https://github.com/WordPress/wordpress-develop/pull/6464
Discussed in https://core.trac.wordpress.org/ticket/61102Fixes#61102.
Props costdev, dmsnell, jonsurrell.
Built from https://develop.svn.wordpress.org/trunk@58072
git-svn-id: http://core.svn.wordpress.org/trunk@57537 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that not only the return values match the expected results, but also that their type is the same.
Going forward, stricter type checking by using `assertSame()` should generally be preferred to `assertEquals()` where appropriate, to make the tests more reliable.
Follow-up to [36444].
Props costdev.
See #60706.
Built from https://develop.svn.wordpress.org/trunk@58070
git-svn-id: http://core.svn.wordpress.org/trunk@57535 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The way `wp_reset_vars()` sets global variables based on `$_POST` and `$_GET` values makes code hard to understand and maintain. It also makes it easy to forget to sanitize input.
This change removes the few places where `wp_reset_vars()` is used in the admin to explicitly use `$_REQUEST` and sanitize any input.
Props swissspidy, audrasjb, davideferre, killua99, weijland, voldemortensen.
Fixes#38073.
Built from https://develop.svn.wordpress.org/trunk@58069
git-svn-id: http://core.svn.wordpress.org/trunk@57534 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Before, `wp_localize_script()` did not work when the `$wp_scripts` global was not already set (for example because of a script registration happening elsewhere) and even emitted a warning in that case. Due to side effects such as block registration early in the load process, this usually never happened. However, the absence of these side effects in 6.5 caused the `wp_localize_script()` to no longer work in places such as the `login_enqueue_scripts`.
By calling `wp_scripts()` in `wp_localize_script()`, the `$wp_scripts` global is automatically set if needed, restoring previous behavior. Adds both a PHP unit test and an e2e test to verify this use case. Hat tip: jorbin.
Happy birthday, Aaron!
Props salcode, aslamdoctor, jorbin, swissspidy.
Fixes#60862.
Built from https://develop.svn.wordpress.org/trunk@58068
git-svn-id: http://core.svn.wordpress.org/trunk@57533 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This can be used by the excerpt block in the editor to change the excerpt length without filtering `excerpt_length` in a conflicting way. This enhancement still needs a corresponding change on the Gutenberg side.
Props swissspidy, antonvlasenko, mukesh27, azaozz, andraganescu, timothyblynjacobs.
Fixes#59043.
Built from https://develop.svn.wordpress.org/trunk@58065
git-svn-id: http://core.svn.wordpress.org/trunk@57530 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Moves the translatable strings from the JS template defined in PHP to the `updates.js` script, where `_n()` can be used as recommended.
Props ideag, SergeyBiryukov, daledupreez, audrasjb, ocean90, swissspidy.
Fixes#37287.
Built from https://develop.svn.wordpress.org/trunk@58064
git-svn-id: http://core.svn.wordpress.org/trunk@57529 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Improve support for using only PHP translation files.
This builds on top of the PHP translation file support added in WordPress 6.5, improving the behavior for projects using solely `.l10n.php` translation files and no `.mo.` and `.po` files.
Updates `wp_get_installed_translations()`, which is used when updating language packs and when uninstalling plugins/themes (to remove the translations again), to look for PHP translation files and read metadata from them. Additionally, the file lookup is now cached thanks to using `WP_Textdomain_Registry`.
Updates `Language_Pack_Upgrader::check_package()` to allow language packs that only contain PHP translation files. While WordPress.org continues to serve `.mo` and `.po` files, third-party services might want to only use the PHP file format.
See #60554.
Built from https://develop.svn.wordpress.org/trunk@58062
git-svn-id: http://core.svn.wordpress.org/trunk@57527 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This builds on top of the PHP translation file support added in WordPress 6.5, improving the behavior for projects using solely `.l10n.php` translation files and no `.mo.` and `.po` files.
Updates `wp_get_installed_translations()`, which is used when updating language packs and when uninstalling plugins/themes (to remove the translations again), to look for PHP translation files and read metadata from them. Additionally, the file lookup is now cached thanks to using `WP_Textdomain_Registry`.
Updates `Language_Pack_Upgrader::check_package()` to allow language packs that only contain PHP translation files. While WordPress.org continues to serve `.mo` and `.po` files, third-party services might want to only use the PHP file format.
Props swissspidy.
Fixes#60554.
Built from https://develop.svn.wordpress.org/trunk@58061
git-svn-id: http://core.svn.wordpress.org/trunk@57526 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[56950] reduced the heading size of About screen headings, but that did not edit the size for smaller viewports.
This changeset fixes this issue, and also updates the larger fluid font size (960px - 1200px).
Follow-up to [56950].
Props dhruvang21, sabernhardt, khokansardar.
Fixes#61030.
Built from https://develop.svn.wordpress.org/trunk@58060
git-svn-id: http://core.svn.wordpress.org/trunk@57525 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that not only the return values match the expected results, but also that their type is the same.
Going forward, stricter type checking by using `assertSame()` should generally be preferred to `assertEquals()` where appropriate, to make the tests more reliable.
Follow-up to [38381].
Props costdev.
See #60706.
Built from https://develop.svn.wordpress.org/trunk@58054
git-svn-id: http://core.svn.wordpress.org/trunk@57519 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The pullquote block needed the base font size adding back in. This also adds in support for appearance settings for weight and style in addition to the original ticket. This fixes a previous commit which changed the default font size of pullquote blocks, quote blocks and blockquotes.
Props sabernhardt.
Fixes#61034.
Built from https://develop.svn.wordpress.org/trunk@58053
git-svn-id: http://core.svn.wordpress.org/trunk@57518 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that not only the return values match the expected results, but also that their type is the same.
Going forward, stricter type checking by using `assertSame()` should generally be preferred to `assertEquals()` where appropriate, to make the tests more reliable.
Follow-up to [38778], [46829].
Props costdev.
See #60706.
Built from https://develop.svn.wordpress.org/trunk@58052
git-svn-id: http://core.svn.wordpress.org/trunk@57517 1a063a9b-81f0-0310-95a4-ce76da25c4cd
All assertions in PHPUnit have a `$message` parameter. Setting this parameter allows to distinguish which assertion is failing when a test runs multiple assertions, making debugging of the tests easier.
Follow-up to [34928], [51478], [58039].
See #60426.
Built from https://develop.svn.wordpress.org/trunk@58051
git-svn-id: http://core.svn.wordpress.org/trunk@57516 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The purpose of `tests/e2e/specs/gutenberg-plugin.test.js` is to ensure that running the Gutenberg plugin (stable version) on a WordPress `trunk` install doesn't produce any fatals.
The test was introduced in [54913], i.e. it has been around since WP 6.2. It makes sense to have it present on older branches, as the Gutenberg plugin not only supports `trunk`, but also the current stable version of WordPress (i.e. currently 6.5), and one version below (6.4). However, it is not expected to work on any earlier versions beyond that; in practice, it has produced errors on some of those.
This changeset checks the REST API response from the plugin activation request. If it returns an error with error code `plugin_wp_incompatible`, it skips the test.
Props jorbin, johnbillion, swissspidy.
Fixes#60971.
Built from https://develop.svn.wordpress.org/trunk@58046
git-svn-id: http://core.svn.wordpress.org/trunk@57512 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that not only the return values match the expected results, but also that their type is the same.
Going forward, stricter type checking by using `assertSame()` should generally be preferred to `assertEquals()` where appropriate, to make the tests more reliable.
Follow-up to [41047].
Props costdev.
See #60706.
Built from https://develop.svn.wordpress.org/trunk@58044
git-svn-id: http://core.svn.wordpress.org/trunk@57510 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Two `@since` PHPDoc fields, and the version argument to one `_deprecated_argument()` incorrectly stated 6.5.1 as the relevant WordPress version where a change was introduced.
This changeset fixes them by setting them to 6.5.3 instead.
Follow-up to [57919].
See #60754.
Built from https://develop.svn.wordpress.org/trunk@58042
git-svn-id: http://core.svn.wordpress.org/trunk@57508 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since [60428] the Tag Processor has been misidentifying single-character
funky comments. It has been asserting that the full token-length for a
funky comment must be at least three characters after the opening (e.g.
`</1>`), but it has been starting to look for the closing `>` after
those same three characters. This means that it has been skipping the
actual close of these funky comments and swallowing up the next syntax
until it finds a `>`, often consuming the next tag in the process.
This patch fixes the detector and restores finding the following token.
Developed in https://github.com/WordPress/wordpress-develop/pull/6412
Discussed in https://core.trac.wordpress.org/ticket/60170
Follow-up to [60428].
Fixes#60170.
Props dmsnell, gziolo, jonsurrell.
Built from https://develop.svn.wordpress.org/trunk@58040
git-svn-id: http://core.svn.wordpress.org/trunk@57506 1a063a9b-81f0-0310-95a4-ce76da25c4cd
All assertions in PHPUnit have a `$message` parameter. Setting this parameter allows to distinguish which assertion is failing when a test runs multiple assertions, making debugging of the tests easier.
This optional parameter is now added for `WP_Test_REST_TestCase::assertErrorResponse()`.
Follow-up to [34928], [51478].
Props mykolashlyakhtun, antonvlasenko, swissspidy, SergeyBiryukov.
Fixes#60426.
Built from https://develop.svn.wordpress.org/trunk@58039
git-svn-id: http://core.svn.wordpress.org/trunk@57505 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changesets replaces the "Edit Site" link with "Site Editor" to avoid duplicate link anchors on multisite admin toolbar. The remaining "Edit site" link takes the user to the site editing screen in the network admin area (`network/site-info.php`) while the new "Site Editor" link takes the user to the site editor (`site-editor.php`).
Follow-up to [52158]. See GB27135.
Props johnbillion, sabernhardt, audrasjb, johnjamesjacoby, pratiklondhe.
Fixes#60977.
Built from https://develop.svn.wordpress.org/trunk@58035
git-svn-id: http://core.svn.wordpress.org/trunk@57501 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This extends the benefits of persistent caching added in [56978] for block theme patterns to sites that are not using a persistent object cache. By default, these caches expire using the value of the `WP_Theme::cache_expiration` property. The transient cache TTL can be overridden using the newly introduced `wp_theme_files_cache_ttl` filter.
Props thekt12, joemcgill, flixos90, peterwilsoncc, spacedmonkey.
See #59600, #59719.
Built from https://develop.svn.wordpress.org/trunk@58025
git-svn-id: http://core.svn.wordpress.org/trunk@57491 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove `target="_blank"` from two links to developer resources on adding the personal data eraser to plugins in the Help info for the privacy screens. Also rectifies differences between the export and erase text for consistency and changes the order of paragraphs.
Props sabernhardt, joedolson.
Fixes#60097.
Built from https://develop.svn.wordpress.org/trunk@58021
git-svn-id: http://core.svn.wordpress.org/trunk@57487 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This matches the type expected by the `setcookie()` function for the `$domain` parameter, and resolves a fatal error if `strict_types` is enabled.
Reference: [https://www.php.net/setcookie PHP Manual: setcookie()].
Follow-up to [2725], [6434], [12732], [13062].
Props kmvan, rajinsharwar, jrf, desrosj, Cybr, nicolefurlan, oglekler, hellofromTonya, kirasong, chaion07, mukesh27.
Fixes#46550.
Built from https://develop.svn.wordpress.org/trunk@58011
git-svn-id: http://core.svn.wordpress.org/trunk@57482 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In this patch, the test suite from html5lib validates the tree-construction
steps in the HTML Processor to ensure that they are behaving according to the
HTML specification. This suite of tests is also used by the servo project to
test its html5ever package.
A new test module in the HTML API transforms HTML Processor output to match
the expected tree shape from the external tests. For cases where there are
tests validating behaviors of unsupported HTML tags and constructs, the tests
are marked as skipped. As the HTML API continues to expand its own support,
the number of skipped tests will automatically shrink down towards zero.
Additional tests are skipped through the `SKIP_TEST` array in the test runner.
Fixes#60227.
See #58517.
Props azaozz, costdev, dmsnell, hellofromtonya, jonsurrell, jorbin, swisspidy.
Built from https://develop.svn.wordpress.org/trunk@58010
git-svn-id: http://core.svn.wordpress.org/trunk@57481 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In PHP 8.4, declaring function or method parameters with a default value of `null` is deprecated if the type is not nullable.
PHP applications are recommended to ''explicitly'' declare the type as nullable. All type declarations that have a default value of `null`, but without declaring `null` in the type declaration, will emit a deprecation notice:
{{{
function test( array $value = null ) {}
}}}
`Deprecated: Implicitly marking parameter $value as nullable is deprecated, the explicit nullable type must be used instead`
**Recommended Changes**
Change the implicit nullable type declaration to a nullable type declaration, available since PHP 7.1:
{{{#!diff
- function test( string $test = null ) {}
+ function test( ?string $test = null ) {}
}}}
This commit updates the affected instances in core to use a nullable type declaration.
References:
* [https://wiki.php.net/rfc/deprecate-implicitly-nullable-types PHP RFC: Deprecate implicitly nullable parameter types]
* [https://php.watch/versions/8.4/implicitly-marking-parameter-type-nullable-deprecated PHP.Watch: PHP 8.4: Implicitly nullable parameter declarations deprecated]
Follow-up to [28731], [50552], [57337], [57985].
Props ayeshrajans, jrf, audrasjb, jorbin.
Fixes#60786.
Built from https://develop.svn.wordpress.org/trunk@58009
git-svn-id: http://core.svn.wordpress.org/trunk@57480 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes the issue where negative values aren't allows in older versions of IE. There is more discussion in another ticket on a wider approach, but for now the decision to commit this was made as an interim solution.
Props mukesh27, SergeyBiryukov, sabernhardt, poena.
Fixes#46771.
Built from https://develop.svn.wordpress.org/trunk@58005
git-svn-id: http://core.svn.wordpress.org/trunk@57479 1a063a9b-81f0-0310-95a4-ce76da25c4cd
While technically only `null`, `WP_User`, or `WP_Error` should be returned from the `authenticate` filter, a plugin might return boolean `false` instead, which would trigger the `authentication_failed` error prior to [57882].
This commit aims to preserve that behavior in case `false` is returned.
Follow-up to [57882].
Props johnbillion.
See #60700.
Built from https://develop.svn.wordpress.org/trunk@57990
git-svn-id: http://core.svn.wordpress.org/trunk@57476 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Stop enqueueing polyfills such as `wp-polyfill-inert` (for the `inert` attribute) and `regenerator-runtime` (for generator functions), as they are no longer needed, considering the WordPress project's [https://make.wordpress.org/core/handbook/best-practices/browser-support/ browser support policy].
In addition to that, `wp-polyfill` (essentially `core-js`) is no longer enqueued as a dependency of `react`. This was added in [43903] to ensure compatibility with IE 11, which is no longer supported by WordPress. Developers requiring `wp-polyfill` need to manually add it as a dependency for their scripts.
Props swissspidy, flixos90, adamsilverstein, youknowriad, gziolo.
Fixes#60962.
Built from https://develop.svn.wordpress.org/trunk@57981
git-svn-id: http://core.svn.wordpress.org/trunk@57467 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Currently, in blocks themes it's possible to use the ${type}_template_hierarchy filter to alter the template hierarchy. However, those filters are not taken into consideration by the Choose a pattern popup screen that appears when creating a new template in the Site Editor, causing a mismatch between the editor and the frontend.
Props aljullu, mukesh27, ntsekouras, jorgefilipecosta, gziolo.
Fixes#60846.
Built from https://develop.svn.wordpress.org/trunk@57944
git-svn-id: http://core.svn.wordpress.org/trunk@57441 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Include the asset version of JavaScript and CSS files when generating the ETag for concatenated assets in `load-scripts.php` and `load-styles.php`. This ensures the ETag is updated as script versions change (for example editor package updates) rather than only when the WordPress version changes.
The `W\` prefix is added to the generated ETag to allow for CDNs and proxy servers modifying the script to add or improve the compression algorithm.
Props azaozz, dav4, ironprogrammer, johnbillion, kkmuffme, monzuralam, peterwilsoncc, sergeybiryukov.
Fixes#58433.
Built from https://develop.svn.wordpress.org/trunk@57943
git-svn-id: http://core.svn.wordpress.org/trunk@57440 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The value of `start` is not fully supported by Opera Mini which has 1.01% usage. There is no material change in functionality with this change.
Follow-up to [55919].
Props davidbaumwald, sabernhardt, khokansardar, devsahadat.
Fixes#60876.
Built from https://develop.svn.wordpress.org/trunk@57933
git-svn-id: http://core.svn.wordpress.org/trunk@57434 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Due to some changes on the WP.com side to compress the requested images on the fly, the exact image size in the response could be different between platforms.
This commit aims to make the affected tests more reliable.
Follow-up to [139/tests], [31258], [34568], [47142], [57903], [57904], [57924].
Props peterwilsoncc, jorbin.
See #60865.
Built from https://develop.svn.wordpress.org/trunk@57931
git-svn-id: http://core.svn.wordpress.org/trunk@57432 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds an `is_dir()` check in `_get_block_templates_paths` before trying to run a `RecursiveDirectoryIterator` to avoid errors being reported in New Relic even thought the errors should be handled by a try/catch block.
Follow-up to [57215].
Props iCaleb, sean212, mukesh27, joemcgill.
Fixes#60915.
Built from https://develop.svn.wordpress.org/trunk@57928
git-svn-id: http://core.svn.wordpress.org/trunk@57429 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since WordPress 6.5, the minimum supported version of MySQL and MariaDB is 5.5.5. This means all supported database servers now support the `utf8mb4` character set and therefore the conditional logic for this is no longer necessary.
Props l1nuxjedi, craigfrancis, OllieJones, johnbillion
Fixes#60096
Built from https://develop.svn.wordpress.org/trunk@57926
git-svn-id: http://core.svn.wordpress.org/trunk@57427 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Some plugins pass invalid values such as `null` instead of a string, which has never been supported by WordPress (no translations are loaded) and was technically undefined behavior. With the introduction of the new l10n library in #59656, which has stricter type hints, this could end up causing warnings or even fatal errors.
This change adds a deliberate short-circuit to `load_textdomain()` & co. to better handle such a case and document that it is not supported.
Props verygoode, swissspidy.
Fixes#60888.
Built from https://develop.svn.wordpress.org/trunk@57925
git-svn-id: http://core.svn.wordpress.org/trunk@57426 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Follow-up to #60865 / [57903] where similar instances were recently updated due to an upstream change.
Particularly the `test_wp_crop_image_with_url()` test recently began to fail on some environments, likely because of the same change.
This updates the image URLs with the aim to bring more consistency and to get the test passing again more broadly.
Fixes#60907.
Built from https://develop.svn.wordpress.org/trunk@57924
git-svn-id: http://core.svn.wordpress.org/trunk@57425 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, when `WP_PLUGIN_DIR` was set to something other than `wp-content/plugins`, e.g. `wp-content/mods`, `load_script_textdomain` was searching for script translations in `wp-content/languages/mods`. However, that is incorrect, as `WP_PLUGIN_DIR` does not affect where translations are stored. The location is always `wp-content/languages/plugins`.
Props coreymckrill, swissspidy.
Fixes#60891.
Built from https://develop.svn.wordpress.org/trunk@57922
git-svn-id: http://core.svn.wordpress.org/trunk@57423 1a063a9b-81f0-0310-95a4-ce76da25c4cd
An excessive amount of autoloaded options is a common cause for slow database responses, sometimes caused by very large individual autoloaded options. As it is not mandatory to provide an autoload value when adding an option to the database, it tends to be ignored, which in combination with a default value of "yes" and lack of documentation can lead to the aforementioned problem.
This changeset enhances the option autoloading behavior in several ways:
* Update the function documentation to encourage the use of boolean `true` or `false` to explicitly provide an autoload value for an option.
* Use new string values `on` and `off` for explicitly provided values stored in the database, to distinguish them from `yes` and `no`, since `yes` does not allow determining whether it was set intentionally by the developer or only as a default.
* Effectively deprecate the values `yes` and `no`. They are still supported for backward compatibility, but now discouraged.
* Use `null` as new default autoload value for `add_option()`. If the developer does not provide an explicit value, this will now trigger WordPress logic to determine an autoload value to use:
* If WordPress determines that the option should not be autoloaded, it is stored in the database as `auto-off`. As part of this changeset, the single heuristic introduced for that is to check whether the option size is larger than a threshold of 150k bytes. This threshold is filterable via a new `wp_max_autoloaded_option_size` filter.
* If WordPress determines that the option should be autoloaded, it is stored in the database as `auto-on`. No logic to make such a decision is introduced as part of this changeset, but a new filter `wp_default_autoload_value` can be used to define such heuristics, e.g. by optimization plugins.
* If WordPress cannot determine whether or not to autoload the option, it is stored in the database as `auto`.
* This effectively means that any option without an explicit autoload value provided by the developer will be stored with an autoload value of `auto`, unless the option's size exceeds the aforementioned threshold. Options with a value of `auto` are still autoloaded as of today, most importantly for backward compatibility. A new function `wp_autoload_values_to_autoload()` returns the list of autolaod values that dictate for an option to be autoloaded, and a new filter `wp_autoload_values_to_autoload` can be used to alter that list.
These behavioral changes encourage developers to be more mindful of autoloading, while providing WordPress core and optimization plugins with additional control over heuristics for autoloading options where no explicit autoload value was provided.
At the same time, the changes are fully backward compatible from a functionality perspective, with the only exception being that very large options will now no longer be autoloaded if the developer did not explicitly request for them to be autoloaded. Neither WordPress core nor plugins are able to override an explicitly provided value, which is intentional to continue giving developers full control over their own options.
Props pbearne, flixos90, joemcgill, azaozz, spacedmonkey, swissspidy, mukesh27, markjaquith.
Fixes#42441.
Built from https://develop.svn.wordpress.org/trunk@57920
git-svn-id: http://core.svn.wordpress.org/trunk@57421 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `$context` argument passed to filters such as `hooked_block_types`, `hooked_block`, and `hooked_block_{$hooked_block_type}` allows them to conditionally insert a hooked block. If the anchor block is contained in a template or template part, `$context` will be set to a `WP_Block_Template` object reflecting that template or part.
The aforementioned filters are applied when hooked block insertion is run upon reading a template (or part) from the DB (and before sending the template/part content with hooked blocks inserted over the REST API to the client), but also upon writing to the DB, as that's when the `ignoredHookedBlocks` metadata attribute is set.
Prior to this changeset, the `$context` passed to Block Hooks related filters in the latter case reflected the template/part that was already stored in the database (if any), which is a bug; instead, it needs to reflect the template/part that will result from the incoming `POST` network request that will trigger a database update.
Those incoming changes are encapsulated in the `$changes` argument passed to the `reset_pre_insert_template` and `reset_pre_insert_template_part` filters, respectively, and thus to the `inject_ignored_hooked_blocks_metadata_attributes` function that is hooked to them. `$changes` is of type `stdClass` and only contains the fields that need to be updated. That means that in order to create a `WP_Block_Template` object, a two-step process is needed:
- Emulate what the updated `wp_template` or `wp_template_part` post object in the database will look like by merging `$changes` on top of the existing `$post` object fetched from the DB, or from the theme's block template (part) file, if any.
- Create a `WP_Block_Template` from the resulting object.
To achieve the latter, a new helper method (`_build_block_template_object_from_post_object`) is extracted from the existing `_build_block_template_result_from_post` function. (The latter cannot be used directly as it includes a few database calls that will fail if no post object for the template has existed yet in the database.)
While somewhat complicated to implement, the overall change allows for better separation of concerns and isolation of entities. This is visible e.g. in the fact that `inject_ignored_hooked_blocks_metadata_attributes` no longer requires a `$request` argument, which is reflected by unit tests no longer needing to create a `$request` object to pass to it, thus decoupling the function from the templates endpoint controller.
Unit tests for `inject_ignored_hooked_blocks_metadata_attributes` have been moved to a new, separate file. Test coverage has been added such that now, all three relevant scenarios are covered:
- The template doesn't exist in the DB, nor is there a block theme template file for it.
- The template doesn't exist in the DB, but there is a block theme template file for it.
- The template already exists in the DB.
Those scenarios also correspond to the logical branching inside `WP_REST_Templates_Controller::prepare_item_for_database`, which is where `inject_ignored_hooked_blocks_metadata_attributes` gets its data from.
Props tomjcafferkey, bernhard-reiter, gziolo, swissspidy.
Fixes#60754.
Built from https://develop.svn.wordpress.org/trunk@57919
git-svn-id: http://core.svn.wordpress.org/trunk@57420 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Compose V2, which was first released in 2020, is included with all currently supported versions of Docker Desktop. Compose V1 stopped receiving updates in July 2023.
The biggest difference is that the command to interact with Compose changed from `docker-compose` to `docker compose`.
GitHub has now started removing V1 from Ubuntu & Windows images, which caused all Docker-based GitHub Actions workflows to fail.
This change migrates to the new `docker compose` command to address these failures.
Props swissspidy, thelovekesh.
Fixes#60901.
Built from https://develop.svn.wordpress.org/trunk@57918
git-svn-id: http://core.svn.wordpress.org/trunk@57419 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It appears that something has changed on the WP.com side to compress the requested images on the fly, which interfered with the previous expectations in these tests.
This commit uses a direct file URL and updates the expected image size to match the currently returned response.
Follow-up to [139/tests], [31258], [47142].
Props dextorlobo, swissspidy, davidbaumwald, SergeyBiryukov.
See #60865.
Built from https://develop.svn.wordpress.org/trunk@57903
git-svn-id: http://core.svn.wordpress.org/trunk@57404 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The pullquote block wasn't reflecting text color added for quote and add citation text across the front and back of editor. This fixes that by adding ensuring whatever color is selected is shown in both
Props kajalgohel.
Fixes#56524.
Built from https://develop.svn.wordpress.org/trunk@57896
git-svn-id: http://core.svn.wordpress.org/trunk@57397 1a063a9b-81f0-0310-95a4-ce76da25c4cd
There wasn't enough padding and the spacing was deteriorating the more depth there was. This reflects the front now and respects background coloring. Impacts both types of lists although original reporting was just on one.
Props aezazshekh, krupalpanchal, multidots1896, kajalgohel, sabernhardt.
Fixes#56083.
Built from https://develop.svn.wordpress.org/trunk@57895
git-svn-id: http://core.svn.wordpress.org/trunk@57396 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset put back the context parameter of the "Patterns" string which was previously removed to fix a translation issue without introducing a string change during WP 6.5 string freeze period.
Follow-up to [57864].
Props kebbet, narenin, nestea29950.
Fixes#60827.
Built from https://develop.svn.wordpress.org/trunk@57887
git-svn-id: http://core.svn.wordpress.org/trunk@57388 1a063a9b-81f0-0310-95a4-ce76da25c4cd
With this change default shadow presets are never shown for classic themes, and classic themes have no options for adding custom ones.
This essentially reverts [57717] and [57827] / [57828], which had unintended consequences.
Props ajlende, oandregal, madhudollu, swissspidy, get_dave, andrewserong, desrosj.
Fixes#60815.
Built from https://develop.svn.wordpress.org/trunk@57885
git-svn-id: http://core.svn.wordpress.org/trunk@57386 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Relocate the upload of font files uploaded via the Font Library feature to the `wp-content/uploads/fonts` (or multisite equivalent) directory.
This accounts for immutable file systems in which directories are unable to be created within `wp-content` and deploy processes which require special consideration of the `uploads` directory to ensure it remains persistent between deploys.
Props azaozz, burnuser, cbirdsong, christopherplus, costdev, davidbaumwald, desrosj, elrae, euthelup, get_dave, grantmkin, hellofromtonya, janthiel, jazzs3quence, johnbillion, jorbin, justlevine, kraftner, matveb, mcsf, mmaattiiaass, nico23, peterwilsoncc, priethor, rmccue, samuelsidler, swissspidy, youknowriad.
Fixes#60845.
Built from https://develop.svn.wordpress.org/trunk@57878
git-svn-id: http://core.svn.wordpress.org/trunk@57379 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This modifies the font directory API to more closely reflect the upload directory API to help account for naive filtering when uploading fonts.
This moves the protection of infinite loops to the new function `_wp_filter_font_directory()` to allow developers extending and maintaining the font library to apply the filter without the need for a closure.
These changes also ensure both the `upload_dir` and `font_dir` filter are applied consistently when both creating and deleting fonts faces. Prior to this commit the `upload_dir` filter was only fired when creating fonts faces via the REST API.
Applying the font directory filter to the `upload_dir` filter is now done by adding the `_wp_filter_font_directory` function rather than `wp_get_font_dir()`. Developers who have previously modified the font upload directory using the `font_dir` filter will NOT need to upload their code.
Extenders wishing to upload files to the font directory can do so via the code:
{{{#!php
<?php
add_filter( 'upload_dir', '_wp_filter_font_directory' );
// Your code to upload or sideload a font file.
remove_filter( 'upload_dir', '_wp_filter_font_directory' );
}}}
Introduces:
* `wp_font_dir()`: Attempt to create and retrieve the font upload directory. The equivalent to `wp_upload_dir()`.
* `_wp_filter_font_directory()`: To run on the `upload_dir` filter, this sets the default destination of the fonts directory and fires the `font_dir` filter.
`wp_get_font_dir()` has been modified to be a lightweight getter for the font directory. It returns the location without attempting to create it. The equivalent to `wp_get_upload_dir()`.
Follow up to [57740].
Props peterwilsoncc, mukesh27, mikachan, costdev, mmaattiiaass, swissspidy, youknowriad, dd32, grantmkin.
Fixes#60652.
Built from https://develop.svn.wordpress.org/trunk@57868
git-svn-id: http://core.svn.wordpress.org/trunk@57369 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset updates a translation string to ensure the "Patterns" menu item introduced in [57543] is translatable.
This quickfix simply removes the erroneous `context` parameter so no new string is introduced during WP 6.5 string freeze period. A follow-up changeset will be needed to replace the current `__()` function with `_x()` and put back the `context` parameter.
Follow-up to [57543].
Props jdy68, audrasjb, kebbet, swissspidy.
Fixes#60825.
Built from https://develop.svn.wordpress.org/trunk@57864
git-svn-id: http://core.svn.wordpress.org/trunk@57365 1a063a9b-81f0-0310-95a4-ce76da25c4cd
One of the tests for the `wp_kses_xml_named_entities()` function used `utf8_encode( chr( 160 ) )` to set an expectation of a Unicode character for a non-breaking space.
It is understandable that this expectation was previously set this way, as it is not possible for a developer to distinguish between a ''breaking'' space and a ''non-breaking'' space visually, so the chances of the test accidentally breaking on an incorrect save when the plain Unicode character would be used, was high.
However, the `utf8_encode()` function is deprecated as of PHP 8.2, and its use needs to be removed from the WP codebase.
PHP 7.0 has introduced [https://wiki.php.net/rfc/unicode_escape Unicode escape sequences], which allows to create a text string using Unicode characters referenced by their codepoint. By switching the test case to provide the test expectation using a Unicode escape sequence, we remove the use of the deprecated PHP function and still preserve the safeguard against the test accidentally breaking.
Follow-up to [52229].
Props jrf, afercia, poena, SergeyBiryukov.
See #55603, #60705.
Built from https://develop.svn.wordpress.org/trunk@57861
git-svn-id: http://core.svn.wordpress.org/trunk@57362 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The hooks fire before the general `delete_post` / `deleted_post` hooks and have the same parameters.
They complement the `save_post_{$post->post_type}` hook added in [25050] and the `edit_post_{$post->post_type}` hook added in [43617].
Props benniledl, swissspidy, dargus.
Fixes#60433.
Built from https://develop.svn.wordpress.org/trunk@57853
git-svn-id: http://core.svn.wordpress.org/trunk@57354 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Follow-up to [57753] to make tests more robust, as there were multiple permission-related errors in the hosting test results.
With this change, the tests now don’t try setting an owner that doesn’t exist.
Props peterwilsoncc, costdev, javiercasares.
See #57774.
Built from https://develop.svn.wordpress.org/trunk@57849
git-svn-id: http://core.svn.wordpress.org/trunk@57350 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Follow up to [57687]. If no icons of the preferred type are available, then the icon array should return the collection of valid icons found, rather than an empty array.
Props sabernhardt, swissspidy, sabernhardt, antpb, joedolson.
Fixes#60740.
Built from https://develop.svn.wordpress.org/trunk@57845
git-svn-id: http://core.svn.wordpress.org/trunk@57346 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This prunes stores and configurations that are empty arrays, as stores are expected to be JSON objects.
By not printing empty configurations, less redundant data is serialized into the HTML.
Props jonsurrell, luisherranz, darerodz, gziolo, swissspidy.
Fixes#60761.
Built from https://develop.svn.wordpress.org/trunk@57841
git-svn-id: http://core.svn.wordpress.org/trunk@57342 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensures parity with the `script_loader_src` filter for regular scripts, allowing the URL to be filtered, for example to load them from a CDN or alter query parameters.
Props dd32, peterwilsoncc, westonruter.
Fixes#60742.
Built from https://develop.svn.wordpress.org/trunk@57840
git-svn-id: http://core.svn.wordpress.org/trunk@57341 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In `WP_REST_Search_Controller`, the `type` parameter is accessed via the sanitization callback for the `subtype` parameter, which is too early for `type` itself to be already sanitized. This change adds a type check in the `get_search_handler()` method to prevent errors when the type doesn’t match.
Props swissspidy, timothyblynjacobs, dd32.
Fixes#60771.
Built from https://develop.svn.wordpress.org/trunk@57839
git-svn-id: http://core.svn.wordpress.org/trunk@57340 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds an explicit 1 hour expiration for the translation file cache introduced in [57287] / #58919.
This prevents stale caches when a site does not use the regular way of installing language packs, for example when an atomic filesystem is involved.
Also configures the `translation_files` group as a global cache group on multisite.
Props dd32.
Fixes#60764.
Built from https://develop.svn.wordpress.org/trunk@57831
git-svn-id: http://core.svn.wordpress.org/trunk@57332 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is a follow-up to [57717] to ensure that classic themes without a `theme.json` file or without `appearanceTools: true` in `theme.json` do not have shadow controls by default.
Props wildworks, vcanales, madhudollu, swissspidy, youknowriad.
Fixes#60633
Built from https://develop.svn.wordpress.org/trunk@57827
git-svn-id: http://core.svn.wordpress.org/trunk@57328 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Use a priority of 100 to ensure that other filters can add additional directives before the processing starts.
This way, directives will be processed even if the `$parsed_block` variable is edited by a filter.
Props cbravobernal, swissspidy, flixos90, joemcgill, gziolo.
Fixes#60743.
Built from https://develop.svn.wordpress.org/trunk@57826
git-svn-id: http://core.svn.wordpress.org/trunk@57327 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Short-circuits directive processing when the markup does not actually contain any `data-wp-*` attributes.
This reduces function calls and memory usage for the best case scenario due to not involving `WP_HTML_Tag_Processor`.
Props joemcgill, swissspidy, gziolo, cbravobernal, flixos90.
Fixes#60749.
Built from https://develop.svn.wordpress.org/trunk@57824
git-svn-id: http://core.svn.wordpress.org/trunk@57325 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds a test to ensure proper processing of directives on special HTML elements,
or HTML which contains special elements. These special elements are defined by
the HTML API and are the HTML elements which cannot contain other tags, such as
the IFRAME, SCRIPT, TEXTAREA, TITLE, elements, etc...
The server diretive processor performs a custom tracking of HTML structure and
this test ensures it isn't mislead by the handling of those special elements.
Developed in https://github.com/WordPress/wordpress-develop/pull/6247
Discussed in https://core.trac.wordpress.org/ticket/60746
Props santosguillamot, cbravobernal, mukesh27, westonruter, swissspidy, dmsnell.
Follow-up to [57348].
Fixes#60746.
Built from https://develop.svn.wordpress.org/trunk@57822
git-svn-id: http://core.svn.wordpress.org/trunk@57323 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset removes the "Pattern overrides" section from features.
Also updates the field guide link, this link should redirect correctly once the post is published.
Follow-up to [57715], [57767].
Props ryelle, benjamin_zekavica.
See #60303.
Built from https://develop.svn.wordpress.org/trunk@57809
git-svn-id: http://core.svn.wordpress.org/trunk@57310 1a063a9b-81f0-0310-95a4-ce76da25c4cd
