Calling the `count_users()` function is expensive, regardless of the counting strategy that's used, and it gets
slower the more users there are on a site. In order to speed up the Users screen in the admin area, calling
`count_users()` can be avoided entirely while still displaying the total count for users.
This introduces some new functions:
* `wp_is_large_user_count()`
* `wp_get_active_user_count()`
* `wp_update_active_user_count()`
A corresponding `wp_is_large_user_count` filter is also introduced.
Props tharsheblows, johnbillion
Fixes#38741
Built from https://develop.svn.wordpress.org/trunk@41613
git-svn-id: http://core.svn.wordpress.org/trunk@41448 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This was accidentally introduced in [41125]. Since the `added_existing_user` filter has historically accepted either `true` or a `WP_Error` object, the clause is not necessary here. The doc block has been adjusted to account for the new possible `WP_Error` condition.
Fixes#41101.
Built from https://develop.svn.wordpress.org/trunk@41324
git-svn-id: http://core.svn.wordpress.org/trunk@41155 1a063a9b-81f0-0310-95a4-ce76da25c4cd
"Install" is not a noun, and while it might be acceptable to use the verb as a noun, it is not correct. Using the correct
noun, "installation", increases clarity, especially for non-native English speakers.
This change fixes the usage in user-facing text and in developer documentation.
Fixes#41620
Built from https://develop.svn.wordpress.org/trunk@41289
git-svn-id: http://core.svn.wordpress.org/trunk@41129 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Under certain circumstances, it can be necessary that a user should not be added to a site, beyond the restrictions that WordPress core applies. With the new `can_add_user_to_blog` filter, plugin developers can run custom checks and return an error in case of a failure, that will prevent the user from being added.
The user-facing parts and the REST API route that interact with `add_user_to_blog()` have been adjusted accordingly to provide appropriate error feedback when a user could not be added to a site. Furthermore, two existing error feedback messages in the site admin's "New User" screen have been adjusted to properly show inside an error notice instead of a success notice.
Props jmdodd.
Fixes#41101.
Built from https://develop.svn.wordpress.org/trunk@41225
git-svn-id: http://core.svn.wordpress.org/trunk@41065 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This reduces the chances of a site compromise going unnoticed, in the same way that the same notifications for user account email address changes reduces the chances of a user account compromise going unnoticed.
Props MatheusGimenez, johnbillion
Fixes#39117
Built from https://develop.svn.wordpress.org/trunk@41164
git-svn-id: http://core.svn.wordpress.org/trunk@41004 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Before this changeset, the language of a new site would always result in the language of the current network, regardless of the `$site_id` parameter passed that actually determines the network for the site. Now the correct `WPLANG` value is used in such cases.
Alongside this change, a few minor documentation changes around the function have been made to account for the current naming conventions of sites and networks.
Props spacedmonkey.
Fixes#40503.
Built from https://develop.svn.wordpress.org/trunk@41058
git-svn-id: http://core.svn.wordpress.org/trunk@40908 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prior to this change, after creating a site, the network site count was always refreshed on the current network, regardless of whether the site was created on a different network. With the recent changes, particularly [40591], it is now possible to update the site count for a specific `$network_id`, so this changeset makes use of the new parameter.
Fixes#38699.
Built from https://develop.svn.wordpress.org/trunk@40612
git-svn-id: http://core.svn.wordpress.org/trunk@40482 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If an email address is missing an `@`, we can't assume enough to check it against a list of domain names.
Additional validation of email should happen in `is_email()` before being passed to `is_email_address_unsafe()`.
Fixes#39915.
Built from https://develop.svn.wordpress.org/trunk@40595
git-svn-id: http://core.svn.wordpress.org/trunk@40465 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Now that `get_blog_count()` and `get_user_count()` both support passing a `$network_id` parameter (see [40370] and [40371]), similar functionality is now available for `wp_is_large_network()`. In addition, the filter `wp_is_large_network` now accepts the network ID as its fourth parameter.
This changeset furthermore introduces unit tests for the `wp_is_large_network()` function and its filter.
Fixes#40489.
Built from https://develop.svn.wordpress.org/trunk@40590
git-svn-id: http://core.svn.wordpress.org/trunk@40460 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prior to this change, the minimum site name length checked in `wpmu_validate_blog_signup()` was set to a fixed value of 4. The new filter allows tweaking this value, as there may be cases where shorter site names may be required.
Fixes#39676.
Built from https://develop.svn.wordpress.org/trunk@40589
git-svn-id: http://core.svn.wordpress.org/trunk@40459 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Using the new parameter, it is now possible to update the user count on a network different from the current one. While the count itself is technically a global user count and not network-wide, it is stored on each individual network, and the new parameter provides more control about where to update the count.
Fixes#40349. See #38699.
Built from https://develop.svn.wordpress.org/trunk@40485
git-svn-id: http://core.svn.wordpress.org/trunk@40361 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[40295] removed the restriction of a minimum amount of characters for new site names, which could cause unexpected behavior. That changeset is reverted here with the exception of the removal of the `is_super_admin()` check, which can safely be omitted. A new filter for the minimum site name length will be introduced later to be able to modify that behavior.
See #39676, #37616.
Built from https://develop.svn.wordpress.org/trunk@40391
git-svn-id: http://core.svn.wordpress.org/trunk@40298 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `get_user_count()` function returns the number of active users on a network, which is stored in a `user_count` network option. Since `get_network_option()` supports retrieving options from other networks than the current one, `get_user_count()` can now make use of that feature.
Fixes#37866.
Built from https://develop.svn.wordpress.org/trunk@40371
git-svn-id: http://core.svn.wordpress.org/trunk@40278 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `get_blog_count()` function used to support an `$id` parameter for the network ID prior to WordPress 3.1. This parameter has not been used since the introduction of `get_site_option()` and was later deprecated in [25113]. With `get_network_option()` however it is possible to support the parameter again, now properly renamed as `$network_id`.
A unit test has for the parameter has been added as well. Another unit test in the same class was adjusted to work properly with multiple networks existing.
Fixes#37865.
Built from https://develop.svn.wordpress.org/trunk@40370
git-svn-id: http://core.svn.wordpress.org/trunk@40277 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It is sometimes desirable to support shorter site names than 4 characters, therefore that restriction should be removed. It is still possible to manually enforce it by using the `wpmu_validate_blog_signup` filter.
As a result of this change, another `is_super_admin()` call gets removed which affects the ongoing efforts of working on a network-wide role system.
Props milindmore22.
Fixes#39676. See #37616.
Built from https://develop.svn.wordpress.org/trunk@40295
git-svn-id: http://core.svn.wordpress.org/trunk@40202 1a063a9b-81f0-0310-95a4-ce76da25c4cd
With the introduction of user-specific languages in [38705] it's necessary to be able to switch translations on the fly. For example emails should be sent in the language of the recipient and not the one of the current user.
This introduces a new `WP_Locale_Switcher` class which is used for switching locales and translations. It holds the stack of locales whenever `switch_to_locale( $locale )` is called. With `restore_previous_locale()` you can restore the previous locale. `restore_current_locale()` empties the stack and sets the locale back to the initial value.
`switch_to_locale()` is added to most of core's email functions, either with the value of `get_locale()` (site language) or `get_user_locale()` (user language with fallback to site language).
Props yoavf, tfrommen, swissspidy, pbearne, ocean90.
See #29783.
Fixes#26511.
Built from https://develop.svn.wordpress.org/trunk@38961
git-svn-id: http://core.svn.wordpress.org/trunk@38904 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`get_network()` falls back to the current network when called without any arguments. Between this and `get_current_network_id()`, we can replace almost all instances of the global `$current_site` and all instances of `get_current_site()`.
This effectively deprecates `get_current_site()`, something that we'll do in a future ticket.
Props flixos90.
Fixes#37414.
Built from https://develop.svn.wordpress.org/trunk@38814
git-svn-id: http://core.svn.wordpress.org/trunk@38757 1a063a9b-81f0-0310-95a4-ce76da25c4cd
