We will no longer replace previously valid oEmbed responses with an `{{unknown}}` cache value. When this happens due to reaching a rate limit or a service going down, it is data loss, and is not acceptable. This means that oEmbed caches for a post are no longer deleted indiscriminately every time that post is saved.
oEmbed continues to be cached in post meta, with the addition of a separate meta key containing the timestamp of the last retrieval, which is used to avoid re-requesting a recently cached oEmbed response. By default, we consider a valued cached in the past day to be fresh. This can greatly reduce the number of outbound requests, especially in cases where a post containing multiple embeds is saved frequently.
The TTL used to determine whether or not to request a response can be filtered using `oembed_ttl`, thus allowing for the possibility of respecting the optional oEmbed response parameter `cache_age` or altering the period of time a cached value is considered to be fresh.
Now that oEmbeds are previewed in the visual editor as well as the media modal, oEmbed caches are often populated before a post is saved or published. By pre-populating and avoiding having to re-request that response, we also greatly reduce the chances of a stampede happening when a published post is visible before oEmbed caching is complete.
As it previously stood, a stampede was extremely likely to happen, as the AJAX caching was only triggered when `$_GET['message']` was 1. The published message is 6. We now trigger the caching every time `$_GET['message']` is present on the edit screen, as we are able to avoid triggering so many HTTP requests overall.
props markjaquith. fixes#14759. see #17210.
Built from https://develop.svn.wordpress.org/trunk@28972
git-svn-id: http://core.svn.wordpress.org/trunk@28761 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* In `wp_ajax_add_tag()`, `$post_type` is set and never used.
* In `wp_ajax_hidden_columns()`, `$hidden` is set twice, but only checks for the existence of `$_POST['hidden']` the first time. The two lines can be combined and work together.
* In `wp_ajax_inline_save()`, `$mode` is set and never used.
* In `wp_ajax_find_posts()`, `$searchand = $search = '';` is leftover cruft, neither variable is used. `$wpdb` does not need to be imported, it is never used.
* In `wp_ajax_wp_fullscreen_save_post()`, `$post_type` is set and never used.
* In `wp_ajax_save_attachment_order()`, `$post` is set and never used.
* In `wp_ajax_send_attachment_to_editor()`, `$title` is set and never used.
See #27882.
Built from https://develop.svn.wordpress.org/trunk@28292
git-svn-id: http://core.svn.wordpress.org/trunk@28120 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Removes wp-tinymce-schema.js and mark-loaded.js, no longer needed.
- Removes the inlinepopups and most of the wpdialogs plugins; wpdialog.js is moved to wp-includes/js.
- Adds charmap, compat3x, image, link and textcolor plugins, previously contained in /themes/advanced.
- Updates the wordpress, wpeditimage, wpfullscreen, wpgallery and wplink plugins.
- Updates DFW, wp-admin/js/wp-fullscreen.js.
See #24067.
Built from https://develop.svn.wordpress.org/trunk@26876
git-svn-id: http://core.svn.wordpress.org/trunk@26759 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Update about page, there's now 8.
* Display them four wide, not three, and ensure adequate spacing.
* Use a dedicated nonce.
* Push Light to the front in addition to Default.
* Use user-profile.js on about.php. A few extra things are initialized but they are harmless.
see #26468, #26387.
Built from https://develop.svn.wordpress.org/trunk@26776
git-svn-id: http://core.svn.wordpress.org/trunk@26663 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Use wp_add_dashboard_widget() rather than add_meta_box().
* Use original functions like wp_dashboard_primary(), wp_dashboard_right_now(), wp_dashboard_quick_press() (where possible).
* Only include plugins section of the news widget when appropriate, which necessitates the set_current_screen() via the ajax action.
* Remove some debug cruft that was preventing caching and invalidation.
* Simplify lots of things where possible.
see #25824.
Built from https://develop.svn.wordpress.org/trunk@26220
git-svn-id: http://core.svn.wordpress.org/trunk@26128 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Color scheme selection on your own profile page gives you a preview and autosaves the selection.
Also introduces the usage of a preprocessor for core files, namely Sass. For 3.8, we will not expand its implementation past the color schemes. This does require Ruby as well as Sass 3.3.0+ due to the usage of the sourcemap option.
Note that only the default color scheme is available when running out of src. Use build to test the rest as well as the color picker.
props ryelle, melchoyce, tillkruess, drw158, littlethingsstudio, helen. see #25858, #22862.
Built from https://develop.svn.wordpress.org/trunk@26137
git-svn-id: http://core.svn.wordpress.org/trunk@26048 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* `wp_ajax_get_comments()` relies on the `$post_id` global - even though `$_POST['p']` is passed to every action in the test methods. If `$post_id` is still lingering in between tests and doesn't match `p` in the request, the cap check might pass while the queries for comments will blow up. I added `unset( $GLOBALS['post_id'] )` to `Tests_Ajax_GetComments::setUp()`.
* If the global `$post_id` is empty, but `$_REQUEST['p']` is not, `$post_id` is now set to `absint( $_REQUEST['p'] )` and sanity-checked in `wp_ajax_get_comments()`.
* `map_meta_cap()` always assumes that `get_comment()` succeeds when checking for the `edit_comment` cap. It doesn't. I added sanity checks in a few places where it will break early if `get_post()` or `get_comment()` are empty.
* `wp_update_comment()` always assumes `get_comment()` succeeds. It doesn't. I added a check for empty.
All AJAX unit tests run and pass in debug mode. All general unit tests pass against these changes.
Fixes#25282.
Built from https://develop.svn.wordpress.org/trunk@25438
git-svn-id: http://core.svn.wordpress.org/trunk@25360 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* There are several places where a `$_POST` index was unchecked before setting a variable
* In `wp_notify_postauthor()`, `$comment` was being returned null, but its properties were being accessed.
* In `check_ajax_referer()`, 3 different values can be checked for nonce on `$_REQUEST`, but only 1 had an `isset()`
See #25282.
Built from https://develop.svn.wordpress.org/trunk@25433
git-svn-id: http://core.svn.wordpress.org/trunk@25355 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Eliminates the bloated Revisions meta box in favor of 'Revisions: #' in the publish box.
* Adds ability to compare autosave to current post, when revisions are disabled.
* Makes autosaves stand out visually, including "Restore This Autosave".
Also:
* Adds missing capability check for restoring a revision.
* When no revision matches the post's current modified time, avoid marking an autosave as 'current'.
* Fixes wp_get_post_autosave() to return an autosave even when revisions are disabled.
* Add 'check_enabled' arg to wp_get_post_revisions(); false avoids the wp_revisions_enabled() check.
* Adds a responsive slider that is narrower for fewer versions. props markjaquith.
see #24804.
git-svn-id: http://core.svn.wordpress.org/trunk@24790 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Loading indicator when the user is waiting for a trip to the server.
* Bug fixes for diff priming.
* Fix the date display.
* Forget about local comparator, instead order by `modified` on the server.
* Initialize the frame model before the view (this was the source of a LOT of heartache).
git-svn-id: http://core.svn.wordpress.org/trunk@24667 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Update the heartbeat nonce when refreshing nonces on the Edit Post screen.
- After a user logs in from the auth-check dialog, speed up heatrbeat to check/refresh nonces on the Edit Post screen.
- Speeding up heartbeat: bring back the setting how long it should last (how many ticks).
- Add 'heartbeat-nonces-expired' jQuery event when nonces have expired and the user is logged in.
See #23295, see #23216.
git-svn-id: http://core.svn.wordpress.org/trunk@24528 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Much simpler PHP API
* Cleaner and more Backbone-y JS API
* Consequently, does batch queries; this now scales up to hundreds of revisions
Currently missing, but much easier considering the cleaned up base:
* Compare two mode
* RTL
props koopersmith, nacin, adamsilverstein, ocean90. see #24425
git-svn-id: http://core.svn.wordpress.org/trunk@24520 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Move nonces refreshing from autosave to lock checking.
- Do autosave only when there is something to save.
See #23295
git-svn-id: http://core.svn.wordpress.org/trunk@24209 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Refines the UI to make it clearer and easier to use
* Introduces weighted tickmarks
* Fixes comparison bugs.
See #23497 props adamsilverstein
git-svn-id: http://core.svn.wordpress.org/trunk@23769 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Various Updates including:
* i18n fixes
* Added tracking of what revision ID was restored
* async fetching of diffs so that slider works sooner even with many revisions
See #23497 props adamsilverstein, ethitter
git-svn-id: http://core.svn.wordpress.org/trunk@23639 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This implements a new revisions ui using Backbone and preserves all the old methods of "integration" so the change should be transparent to plugins using revisi
ons with CPTs.
This is the first pass and so there are a number of things still to be resolved, more details in the ticket. Feedback welcomed.
git-svn-id: http://core.svn.wordpress.org/trunk@23506 1a063a9b-81f0-0310-95a4-ce76da25c4cd
