In `populate_options()`, if the theme specified by `WP_DEFAULT_THEME` doesn't exist, fall back to the latest core default theme. If we can't find a core default theme, `WP_DEFAULT_THEME` is the best we can do.
Props nacin, jeremyfelt, dd32.
See #34306.
Built from https://develop.svn.wordpress.org/trunk@35738
git-svn-id: http://core.svn.wordpress.org/trunk@35702 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Keeping myhacks support is a small price to pay for not breaking people's sites. Even if it is very very very few sites, breaking sites isn't something that should be encouraged. Even with 10 years of deprecation notices.
https://core.trac.wordpress.org/ticket/33741#comment:18 outlines all the ways that the hack_file and my-hacks options can be setup and thus all the ways that the removal of those options could break sites.
Fixes#33741.
Built from https://develop.svn.wordpress.org/trunk@35688
git-svn-id: http://core.svn.wordpress.org/trunk@35652 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The network admin email setting for a network is often used as a catch-all or notification email separate from the actual user ID set as the owner of the new network. If a non-user email address is set during network installation, we can defer to the current user as the actual network admin and apply the entered email as the address to which general notifications are sent and emails are sent from.
In the future, we'll want to update the messaging around "Network Admin Email" to reflect its reality. See #34293.
Props jjeaton.
Fixes#34065.
Built from https://develop.svn.wordpress.org/trunk@35575
git-svn-id: http://core.svn.wordpress.org/trunk@35539 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34561] instituted the policy of forcing pagination for comments. This strategy
was intended to avert problems when 'page_comments' is set to 0 - as it is by
default - and the number of comments on a given post rises into the hundreds or
thousands. By forcing pagination in all cases, we ensured that WordPress would
not time out by processing unwieldy numbers of comments on a given pageload.
The strategy proves problematic, however, because comment permalinks are
generated using the page of the comment. Forcing pagination for posts that
were not previously paginated would change the URL of all comments that do not
appear on the default comment page.
This changeset reintroduces the 'page_comments' setting and its corresponding
checkbox on Settings > Discussion. A number of tests, which were written after
[34561], are modified to work now that 'page_comments' will, once again, be
disabled by default.
See #8071.
Built from https://develop.svn.wordpress.org/trunk@35331
git-svn-id: http://core.svn.wordpress.org/trunk@35297 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `_network_option()` parameter order will be changing to accept `$network_id` first. The `_site_option()` functions will remain in use throughout core as our way of retrieving a network option for the current network.
See #28290.
Built from https://develop.svn.wordpress.org/trunk@34912
git-svn-id: http://core.svn.wordpress.org/trunk@34877 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, the 'page_comments' toggle allowed users to disable comment
pagination. This toggle was only superficial, however. Even with
'page_comments' turned on, `comments_template()` loaded all of a post's
comments into memory, and passed them to `wp_list_comments()` and
`Walker_Comment`, the latter of which produced markup for only the
current page of comments. In other words, it was possible to enable
'page_comments', thereby showing only a subset of a post's comments on a given
page, but all comments continued to be loaded in the background. This technique
scaled poorly. Posts with hundreds or thousands of comments would load slowly,
or not at all, even when the 'comments_per_page' setting was set to a
reasonable number.
Recent changesets have addressed this problem through more efficient tree-
walking, better descendant caching, and more selective queries for top-level
post comments. The current changeset completes the project by addressing the
root issue: that loading a post causes all of its comments to be loaded too.
Here's the breakdown:
* Comment pagination is now forced. Setting 'page_comments' to false leads to evil things when you have many comments. If you want to avoid pagination, set 'comments_per_page' to something high.
* The 'page_comments' setting has been expunged from options-discussion.php, and from places in the codebase where it was referenced. For plugins relying on 'page_comments', we now force the value to `true` with a `pre_option` filter.
* `comments_template()` now queries for an appropriately small number of comments. Usually, this means the `comments_per_page` value.
* To preserve the current (odd) behavior for comment pagination links, some unholy hacks have been inserted into `comments_template()`. The ugliness is insulated in this function for backward compatibility and to minimize collateral damage. A side-effect is that, for certain settings of 'default_comments_page', up to 2x the value of `comments_per_page` might be fetched at a time.
* In support of these changes, a `$format` parameter has been added to `WP_Comment::get_children()`. This param allows you to request a flattened array of comment children, suitable for feeding into `Walker_Comment`.
* `WP_Query` loops are now informed about total available comment counts and comment pages by the `WP_Comment_Query` (`found_comments`, `max_num_pages`), instead of by `Walker_Comment`.
Aside from radical performance improvements in the case of a post with many
comments, this changeset fixes a bug that caused the first page of comments to
be partial (`found_comments` % `comments_per_page`), rather than the last, as
you'd expect.
Props boonebgorges, wonderboymusic.
Fixes#8071.
Built from https://develop.svn.wordpress.org/trunk@34561
git-svn-id: http://core.svn.wordpress.org/trunk@34525 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds a new table to the database schema (`wp_termmeta`), and a set of
`*_term_meta()` API functions. `get_terms()` and `wp_get_object_terms()`
now also support 'meta_query' parameters, with syntax identical to other
uses of `WP_Meta_Query`.
When fetching terms via `get_terms()` or `wp_get_object_terms()`, metadata for
matched terms is preloaded into the cache by default. Disable this behavior
by setting the new `$update_term_meta_cache` paramater to `false`.
To maximize performance, within `WP_Query` loops, the termmeta cache is *not*
primed by default. Instead, we use a lazy-loading technique: metadata for all
terms belonging to posts in the loop is loaded into the cache the first time
that `get_term_meta()` is called within the loop.
Props boonebgorges, sirzooro.
See #10142.
Built from https://develop.svn.wordpress.org/trunk@34529
git-svn-id: http://core.svn.wordpress.org/trunk@34493 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For the last 10 years, my-hacks has been deprecated and has been throwing a deprecation notice. For the last six years, you haven't been able to enable my-hacks.php in the admin UI. That should be enough time to give developers notice. Plugins and themes seem like they might have staying power.
Fixes#33741
Props bobbingwide
Built from https://develop.svn.wordpress.org/trunk@34291
git-svn-id: http://core.svn.wordpress.org/trunk@34255 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It's pretty easy to run over the `option_name` length, which causes undefined behaviour when inserting and retrieving options. Increasing the length from `VARCHAR(64)` to `VARCHAR(191)` significantly reduces the risk of this occurring.
Because `option_name` has a `UNIQUE` index, we can only increase it to 191 characters, rather than 255. The index can only use a prefix of 191 characters, so will incorrectly restrict long different strings that have the same prefix, if we make the column longer.
Props scribu, OriginalEXE, khromov, MikeHansenMe, netweb, pento.
Fixes#13310.
Built from https://develop.svn.wordpress.org/trunk@34030
git-svn-id: http://core.svn.wordpress.org/trunk@33999 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When inserting an image into a post, the values in `wp.media.controller.Library` should not default to linking the image when no user settings are present.
The default display setting value for `link` is now `none`. User settings persist and will override or confirm this value based on user actions.
Props liljimmi, janhenckens, eherman24, wonderboymusic.
Fixes#31467.
Built from https://develop.svn.wordpress.org/trunk@33729
git-svn-id: http://core.svn.wordpress.org/trunk@33697 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the first big step to supporting arbitrary domains and paths. In this new approach, sites are detected first where possible, then the network is inferred. Allows filtering for arbitrary path segments, smooths out some weirdness, and removes various restrictions. A sunrise plugin could do much of its work by adding filters, if those are even needed.
see #27003.
Built from https://develop.svn.wordpress.org/trunk@27359
git-svn-id: http://core.svn.wordpress.org/trunk@27209 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Reverts [25416], which had all transients being cleared. This leaves much to be desired, but we don't want a core update to be blamed for breaking a site that incorrectly assumes transients aren't transient.
props dartiss, pento.
fixes#20316.
Built from https://develop.svn.wordpress.org/trunk@25838
git-svn-id: http://core.svn.wordpress.org/trunk@25838 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Reverts [25416], which had all transients being cleared. This leaves much to be desired, but we don't want a core update to be blamed for breaking a site that incorrectly assumes transients aren't transient.
props dartiss, pento.
fixes#20316.
Built from https://develop.svn.wordpress.org/trunk@25838
git-svn-id: http://core.svn.wordpress.org/trunk@25750 1a063a9b-81f0-0310-95a4-ce76da25c4cd
