2011-02-22 13:03:06 +01:00
<?xml version="1.0" encoding="UTF-8"?>
<!--
*** GENERATED FROM project.xml - DO NOT EDIT ***
*** EDIT ../build.xml INSTEAD ***
For the purpose of easier reading the script
is divided into following sections:
- initialization
- compilation
- jar
- execution
- debugging
- javadoc
- junit compilation
- junit execution
- junit debugging
- applet
- cleanup
-->
<project xmlns:j2seproject1= "http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3= "http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc= "http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir= ".." default= "default" name= "worldguard-impl" >
<fail message= "Please build using Ant 1.7.1 or higher." >
<condition >
<not >
<antversion atleast= "1.7.1" />
</not>
</condition>
</fail>
<target depends= "test,jar,javadoc" description= "Build and test whole project." name= "default" />
<!--
======================
INITIALIZATION SECTION
======================
-->
<target name= "-pre-init" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "-pre-init" name= "-init-private" >
<property file= "nbproject/private/config.properties" />
<property file= "nbproject/private/configs/${config}.properties" />
<property file= "nbproject/private/private.properties" />
</target>
<target depends= "-pre-init,-init-private" name= "-init-user" >
<property file= "${user.properties.file}" />
<!-- The two properties below are usually overridden -->
<!-- by the active platform. Just a fallback. -->
<property name= "default.javac.source" value= "1.4" />
<property name= "default.javac.target" value= "1.4" />
</target>
<target depends= "-pre-init,-init-private,-init-user" name= "-init-project" >
<property file= "nbproject/configs/${config}.properties" />
<property file= "nbproject/project.properties" />
</target>
<target depends= "-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name= "-do-init" >
<available file= "${manifest.file}" property= "manifest.available" />
<available file= "${application.splash}" property= "splashscreen.available" />
<condition property= "main.class.available" >
<and >
<isset property= "main.class" />
<not >
<equals arg1= "${main.class}" arg2= "" trim= "true" />
</not>
</and>
</condition>
<condition property= "manifest.available+main.class" >
<and >
<isset property= "manifest.available" />
<isset property= "main.class.available" />
</and>
</condition>
<condition property= "do.mkdist" >
<and >
<isset property= "libs.CopyLibs.classpath" />
<not >
<istrue value= "${mkdist.disabled}" />
</not>
</and>
</condition>
<condition property= "manifest.available+main.class+mkdist.available" >
<and >
<istrue value= "${manifest.available+main.class}" />
<isset property= "do.mkdist" />
</and>
</condition>
<condition property= "manifest.available+main.class+mkdist.available+splashscreen.available" >
<and >
<istrue value= "${manifest.available+main.class+mkdist.available}" />
<istrue value= "${splashscreen.available}" />
</and>
</condition>
<condition property= "do.archive" >
<not >
<istrue value= "${jar.archive.disabled}" />
</not>
</condition>
<condition property= "do.archive+manifest.available" >
<and >
<isset property= "manifest.available" />
<istrue value= "${do.archive}" />
</and>
</condition>
<condition property= "do.archive+manifest.available+main.class" >
<and >
<istrue value= "${manifest.available+main.class}" />
<istrue value= "${do.archive}" />
</and>
</condition>
<condition property= "do.archive+manifest.available+main.class+mkdist.available" >
<and >
<istrue value= "${manifest.available+main.class+mkdist.available}" />
<istrue value= "${do.archive}" />
</and>
</condition>
<condition property= "do.archive+manifest.available+main.class+mkdist.available+splashscreen.available" >
<and >
<istrue value= "${manifest.available+main.class+mkdist.available+splashscreen.available}" />
<istrue value= "${do.archive}" />
</and>
</condition>
<condition property= "have.tests" >
<or >
2011-02-22 13:18:27 +01:00
<available file= "${test.tests.dir}" />
2011-02-22 13:03:06 +01:00
</or>
</condition>
<condition property= "have.sources" >
<or >
<available file= "${src.dir}" />
</or>
</condition>
<condition property= "netbeans.home+have.tests" >
<and >
<isset property= "netbeans.home" />
<isset property= "have.tests" />
</and>
</condition>
<condition property= "no.javadoc.preview" >
<and >
<isset property= "javadoc.preview" />
<isfalse value= "${javadoc.preview}" />
</and>
</condition>
<property name= "run.jvmargs" value= "" />
<property name= "javac.compilerargs" value= "" />
<property name= "work.dir" value= "${basedir}" />
<condition property= "no.deps" >
<and >
<istrue value= "${no.dependencies}" />
</and>
</condition>
<property name= "javac.debug" value= "true" />
<property name= "javadoc.preview" value= "true" />
<property name= "application.args" value= "" />
<property name= "source.encoding" value= "${file.encoding}" />
<property name= "runtime.encoding" value= "${source.encoding}" />
<condition property= "javadoc.encoding.used" value= "${javadoc.encoding}" >
<and >
<isset property= "javadoc.encoding" />
<not >
<equals arg1= "${javadoc.encoding}" arg2= "" />
</not>
</and>
</condition>
<property name= "javadoc.encoding.used" value= "${source.encoding}" />
<property name= "includes" value= "**" />
<property name= "excludes" value= "" />
<property name= "do.depend" value= "false" />
<condition property= "do.depend.true" >
<istrue value= "${do.depend}" />
</condition>
<path id= "endorsed.classpath.path" path= "${endorsed.classpath}" />
<condition else= "" property= "endorsed.classpath.cmd.line.arg" value= "-Xbootclasspath/p:'${toString:endorsed.classpath.path}'" >
<length length= "0" string= "${endorsed.classpath}" when= "greater" />
</condition>
<property name= "javac.fork" value= "false" />
<property name= "jar.index" value= "false" />
<available file= "${meta.inf.dir}/persistence.xml" property= "has.persistence.xml" />
</target>
<target name= "-post-init" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "-pre-init,-init-private,-init-user,-init-project,-do-init" name= "-init-check" >
<fail unless= "src.dir" > Must set src.dir</fail>
2011-02-22 13:18:27 +01:00
<fail unless= "test.tests.dir" > Must set test.tests.dir</fail>
2011-02-22 13:03:06 +01:00
<fail unless= "build.dir" > Must set build.dir</fail>
<fail unless= "dist.dir" > Must set dist.dir</fail>
<fail unless= "build.classes.dir" > Must set build.classes.dir</fail>
<fail unless= "dist.javadoc.dir" > Must set dist.javadoc.dir</fail>
<fail unless= "build.test.classes.dir" > Must set build.test.classes.dir</fail>
<fail unless= "build.test.results.dir" > Must set build.test.results.dir</fail>
<fail unless= "build.classes.excludes" > Must set build.classes.excludes</fail>
<fail unless= "dist.jar" > Must set dist.jar</fail>
</target>
<target name= "-init-macrodef-property" >
<macrodef name= "property" uri= "http://www.netbeans.org/ns/j2se-project/1" >
<attribute name= "name" />
<attribute name= "value" />
<sequential >
<property name= "@{name}" value= "${@{value}}" />
</sequential>
</macrodef>
</target>
<target depends= "-init-ap-cmdline-properties" if= "ap.supported.internal" name= "-init-macrodef-javac-with-processors" >
<macrodef name= "javac" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${src.dir}" name= "srcdir" />
<attribute default= "${build.classes.dir}" name= "destdir" />
<attribute default= "${javac.classpath}" name= "classpath" />
<attribute default= "${javac.processorpath}" name= "processorpath" />
<attribute default= "${build.generated.sources.dir}/ap-source-output" name= "apgeneratedsrcdir" />
<attribute default= "${includes}" name= "includes" />
<attribute default= "${excludes}" name= "excludes" />
<attribute default= "${javac.debug}" name= "debug" />
<attribute default= "${empty.dir}" name= "sourcepath" />
<attribute default= "${empty.dir}" name= "gensrcdir" />
<element name= "customize" optional= "true" />
<sequential >
<property location= "${build.dir}/empty" name= "empty.dir" />
<mkdir dir= "${empty.dir}" />
<mkdir dir= "@{apgeneratedsrcdir}" />
<javac debug= "@{debug}" deprecation= "${javac.deprecation}" destdir= "@{destdir}" encoding= "${source.encoding}" excludes= "@{excludes}" fork= "${javac.fork}" includeantruntime= "false" includes= "@{includes}" source= "${javac.source}" sourcepath= "@{sourcepath}" srcdir= "@{srcdir}" target= "${javac.target}" tempdir= "${java.io.tmpdir}" >
<src >
<dirset dir= "@{gensrcdir}" erroronmissingdir= "false" >
<include name= "*" />
</dirset>
</src>
<classpath >
<path path= "@{classpath}" />
</classpath>
<compilerarg line= "${endorsed.classpath.cmd.line.arg}" />
<compilerarg line= "${javac.compilerargs}" />
<compilerarg value= "-processorpath" />
<compilerarg path= "@{processorpath}:${empty.dir}" />
<compilerarg line= "${ap.processors.internal}" />
<compilerarg line= "${annotation.processing.processor.options}" />
<compilerarg value= "-s" />
<compilerarg path= "@{apgeneratedsrcdir}" />
<compilerarg line= "${ap.proc.none.internal}" />
<customize />
</javac>
</sequential>
</macrodef>
</target>
<target depends= "-init-ap-cmdline-properties" name= "-init-macrodef-javac-without-processors" unless= "ap.supported.internal" >
<macrodef name= "javac" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${src.dir}" name= "srcdir" />
<attribute default= "${build.classes.dir}" name= "destdir" />
<attribute default= "${javac.classpath}" name= "classpath" />
<attribute default= "${javac.processorpath}" name= "processorpath" />
<attribute default= "${build.generated.sources.dir}/ap-source-output" name= "apgeneratedsrcdir" />
<attribute default= "${includes}" name= "includes" />
<attribute default= "${excludes}" name= "excludes" />
<attribute default= "${javac.debug}" name= "debug" />
<attribute default= "${empty.dir}" name= "sourcepath" />
<attribute default= "${empty.dir}" name= "gensrcdir" />
<element name= "customize" optional= "true" />
<sequential >
<property location= "${build.dir}/empty" name= "empty.dir" />
<mkdir dir= "${empty.dir}" />
<javac debug= "@{debug}" deprecation= "${javac.deprecation}" destdir= "@{destdir}" encoding= "${source.encoding}" excludes= "@{excludes}" fork= "${javac.fork}" includeantruntime= "false" includes= "@{includes}" source= "${javac.source}" sourcepath= "@{sourcepath}" srcdir= "@{srcdir}" target= "${javac.target}" tempdir= "${java.io.tmpdir}" >
<src >
<dirset dir= "@{gensrcdir}" erroronmissingdir= "false" >
<include name= "*" />
</dirset>
</src>
<classpath >
<path path= "@{classpath}" />
</classpath>
<compilerarg line= "${endorsed.classpath.cmd.line.arg}" />
<compilerarg line= "${javac.compilerargs}" />
<customize />
</javac>
</sequential>
</macrodef>
</target>
<target depends= "-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name= "-init-macrodef-javac" >
<macrodef name= "depend" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${src.dir}" name= "srcdir" />
<attribute default= "${build.classes.dir}" name= "destdir" />
<attribute default= "${javac.classpath}" name= "classpath" />
<sequential >
<depend cache= "${build.dir}/depcache" destdir= "@{destdir}" excludes= "${excludes}" includes= "${includes}" srcdir= "@{srcdir}" >
<classpath >
<path path= "@{classpath}" />
</classpath>
</depend>
</sequential>
</macrodef>
<macrodef name= "force-recompile" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${build.classes.dir}" name= "destdir" />
<sequential >
<fail unless= "javac.includes" > Must set javac.includes</fail>
<pathconvert pathsep= "${line.separator}" property= "javac.includes.binary" >
<path >
<filelist dir= "@{destdir}" files= "${javac.includes}" />
</path>
<globmapper from= "*.java" to= "*.class" />
</pathconvert>
<tempfile deleteonexit= "true" property= "javac.includesfile.binary" />
<echo file= "${javac.includesfile.binary}" message= "${javac.includes.binary}" />
<delete >
<files includesfile= "${javac.includesfile.binary}" />
</delete>
<delete file= "${javac.includesfile.binary}" />
</sequential>
</macrodef>
</target>
<target name= "-init-macrodef-junit" >
<macrodef name= "junit" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${includes}" name= "includes" />
<attribute default= "${excludes}" name= "excludes" />
<attribute default= "**" name= "testincludes" />
<sequential >
<junit dir= "${work.dir}" errorproperty= "tests.failed" failureproperty= "tests.failed" fork= "true" showoutput= "true" tempdir= "${build.dir}" >
<batchtest todir= "${build.test.results.dir}" >
2011-02-22 13:18:27 +01:00
<fileset dir= "${test.tests.dir}" excludes= "@{excludes},${excludes}" includes= "@{includes}" >
2011-02-22 13:03:06 +01:00
<filename name= "@{testincludes}" />
</fileset>
</batchtest>
<classpath >
<path path= "${run.test.classpath}" />
</classpath>
<syspropertyset >
<propertyref prefix= "test-sys-prop." />
<mapper from= "test-sys-prop.*" to= "*" type= "glob" />
</syspropertyset>
<formatter type= "brief" usefile= "false" />
<formatter type= "xml" />
<jvmarg line= "${endorsed.classpath.cmd.line.arg}" />
<jvmarg line= "${run.jvmargs}" />
</junit>
</sequential>
</macrodef>
</target>
<target depends= "-init-debug-args" name= "-init-macrodef-nbjpda" >
<macrodef name= "nbjpdastart" uri= "http://www.netbeans.org/ns/j2se-project/1" >
<attribute default= "${main.class}" name= "name" />
<attribute default= "${debug.classpath}" name= "classpath" />
<attribute default= "" name= "stopclassname" />
<sequential >
<nbjpdastart addressproperty= "jpda.address" name= "@{name}" stopclassname= "@{stopclassname}" transport= "${debug-transport}" >
<classpath >
<path path= "@{classpath}" />
</classpath>
</nbjpdastart>
</sequential>
</macrodef>
<macrodef name= "nbjpdareload" uri= "http://www.netbeans.org/ns/j2se-project/1" >
<attribute default= "${build.classes.dir}" name= "dir" />
<sequential >
<nbjpdareload >
<fileset dir= "@{dir}" includes= "${fix.classes}" >
<include name= "${fix.includes}*.class" />
</fileset>
</nbjpdareload>
</sequential>
</macrodef>
</target>
<target name= "-init-debug-args" >
<property name= "version-output" value= "java version "${ant.java.version}" />
<condition property= "have-jdk-older-than-1.4" >
<or >
<contains string= "${version-output}" substring= "java version "1.0" />
<contains string= "${version-output}" substring= "java version "1.1" />
<contains string= "${version-output}" substring= "java version "1.2" />
<contains string= "${version-output}" substring= "java version "1.3" />
</or>
</condition>
<condition else= "-Xdebug" property= "debug-args-line" value= "-Xdebug -Xnoagent -Djava.compiler=none" >
<istrue value= "${have-jdk-older-than-1.4}" />
</condition>
<condition else= "dt_socket" property= "debug-transport-by-os" value= "dt_shmem" >
<os family= "windows" />
</condition>
<condition else= "${debug-transport-by-os}" property= "debug-transport" value= "${debug.transport}" >
<isset property= "debug.transport" />
</condition>
</target>
<target depends= "-init-debug-args" name= "-init-macrodef-debug" >
<macrodef name= "debug" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<attribute default= "${main.class}" name= "classname" />
<attribute default= "${debug.classpath}" name= "classpath" />
<element name= "customize" optional= "true" />
<sequential >
<java classname= "@{classname}" dir= "${work.dir}" fork= "true" >
<jvmarg line= "${endorsed.classpath.cmd.line.arg}" />
<jvmarg line= "${debug-args-line}" />
<jvmarg value= "-Xrunjdwp:transport=${debug-transport},address=${jpda.address}" />
<jvmarg value= "-Dfile.encoding=${runtime.encoding}" />
<redirector errorencoding= "${runtime.encoding}" inputencoding= "${runtime.encoding}" outputencoding= "${runtime.encoding}" />
<jvmarg line= "${run.jvmargs}" />
<classpath >
<path path= "@{classpath}" />
</classpath>
<syspropertyset >
<propertyref prefix= "run-sys-prop." />
<mapper from= "run-sys-prop.*" to= "*" type= "glob" />
</syspropertyset>
<customize />
</java>
</sequential>
</macrodef>
</target>
<target name= "-init-macrodef-java" >
<macrodef name= "java" uri= "http://www.netbeans.org/ns/j2se-project/1" >
<attribute default= "${main.class}" name= "classname" />
<attribute default= "${run.classpath}" name= "classpath" />
<element name= "customize" optional= "true" />
<sequential >
<java classname= "@{classname}" dir= "${work.dir}" fork= "true" >
<jvmarg line= "${endorsed.classpath.cmd.line.arg}" />
<jvmarg value= "-Dfile.encoding=${runtime.encoding}" />
<redirector errorencoding= "${runtime.encoding}" inputencoding= "${runtime.encoding}" outputencoding= "${runtime.encoding}" />
<jvmarg line= "${run.jvmargs}" />
<classpath >
<path path= "@{classpath}" />
</classpath>
<syspropertyset >
<propertyref prefix= "run-sys-prop." />
<mapper from= "run-sys-prop.*" to= "*" type= "glob" />
</syspropertyset>
<customize />
</java>
</sequential>
</macrodef>
</target>
<target name= "-init-macrodef-copylibs" >
<macrodef name= "copylibs" uri= "http://www.netbeans.org/ns/j2se-project/3" >
<element name= "customize" optional= "true" />
<sequential >
<property location= "${build.classes.dir}" name= "build.classes.dir.resolved" />
<pathconvert property= "run.classpath.without.build.classes.dir" >
<path path= "${run.classpath}" />
<map from= "${build.classes.dir.resolved}" to= "" />
</pathconvert>
<pathconvert pathsep= " " property= "jar.classpath" >
<path path= "${run.classpath.without.build.classes.dir}" />
<chainedmapper >
<flattenmapper />
<globmapper from= "*" to= "lib/*" />
</chainedmapper>
</pathconvert>
<taskdef classname= "org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath= "${libs.CopyLibs.classpath}" name= "copylibs" />
<copylibs compress= "${jar.compress}" index= "${jar.index}" jarfile= "${dist.jar}" manifest= "${manifest.file}" runtimeclasspath= "${run.classpath.without.build.classes.dir}" >
<fileset dir= "${build.classes.dir}" />
<manifest >
<attribute name= "Class-Path" value= "${jar.classpath}" />
<customize />
</manifest>
</copylibs>
</sequential>
</macrodef>
</target>
<target name= "-init-presetdef-jar" >
<presetdef name= "jar" uri= "http://www.netbeans.org/ns/j2se-project/1" >
<jar compress= "${jar.compress}" index= "${jar.index}" jarfile= "${dist.jar}" >
<j2seproject1:fileset dir= "${build.classes.dir}" />
</jar>
</presetdef>
</target>
<target name= "-init-ap-cmdline-properties" >
<property name= "annotation.processing.enabled" value= "true" />
<property name= "annotation.processing.processors.list" value= "" />
<property name= "annotation.processing.processor.options" value= "" />
<property name= "annotation.processing.run.all.processors" value= "true" />
<property name= "javac.processorpath" value= "${javac.classpath}" />
<property name= "javac.test.processorpath" value= "${javac.test.classpath}" />
<condition property= "ap.supported.internal" value= "true" >
<not >
<matches pattern= "1\.[0-5](\..*)?" string= "${javac.source}" />
</not>
</condition>
</target>
<target depends= "-init-ap-cmdline-properties" if= "ap.supported.internal" name= "-init-ap-cmdline-supported" >
<condition else= "" property= "ap.processors.internal" value= "-processor ${annotation.processing.processors.list}" >
<isfalse value= "${annotation.processing.run.all.processors}" />
</condition>
<condition else= "" property= "ap.proc.none.internal" value= "-proc:none" >
<isfalse value= "${annotation.processing.enabled}" />
</condition>
</target>
<target depends= "-init-ap-cmdline-properties,-init-ap-cmdline-supported" name= "-init-ap-cmdline" >
<property name= "ap.cmd.line.internal" value= "" />
</target>
<target depends= "-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name= "init" />
<!--
===================
COMPILATION SECTION
===================
-->
<target name= "-deps-jar-init" unless= "built-jar.properties" >
<property location= "${build.dir}/built-jar.properties" name= "built-jar.properties" />
<delete file= "${built-jar.properties}" quiet= "true" />
</target>
<target if= "already.built.jar.${basedir}" name= "-warn-already-built-jar" >
<echo level= "warn" message= "Cycle detected: worldguard was already built" />
</target>
<target depends= "init,-deps-jar-init" name= "deps-jar" unless= "no.deps" >
<mkdir dir= "${build.dir}" />
<touch file= "${built-jar.properties}" verbose= "false" />
<property file= "${built-jar.properties}" prefix= "already.built.jar." />
<antcall target= "-warn-already-built-jar" />
<propertyfile file= "${built-jar.properties}" >
<entry key= "${basedir}" value= "" />
</propertyfile>
</target>
<target depends= "init,-check-automatic-build,-clean-after-automatic-build" name= "-verify-automatic-build" />
<target depends= "init" name= "-check-automatic-build" >
<available file= "${build.classes.dir}/.netbeans_automatic_build" property= "netbeans.automatic.build" />
</target>
<target depends= "init" if= "netbeans.automatic.build" name= "-clean-after-automatic-build" >
<antcall target= "clean" />
</target>
<target depends= "init,deps-jar" name= "-pre-pre-compile" >
<mkdir dir= "${build.classes.dir}" />
</target>
<target name= "-pre-compile" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target if= "do.depend.true" name= "-compile-depend" >
<pathconvert property= "build.generated.subdirs" >
<dirset dir= "${build.generated.sources.dir}" erroronmissingdir= "false" >
<include name= "*" />
</dirset>
</pathconvert>
<j2seproject3:depend srcdir= "${src.dir}:${build.generated.subdirs}" />
</target>
<target depends= "init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if= "have.sources" name= "-do-compile" >
<j2seproject3:javac gensrcdir= "${build.generated.sources.dir}" />
<copy todir= "${build.classes.dir}" >
<fileset dir= "${src.dir}" excludes= "${build.classes.excludes},${excludes}" includes= "${includes}" />
</copy>
</target>
<target if= "has.persistence.xml" name= "-copy-persistence-xml" >
<mkdir dir= "${build.classes.dir}/META-INF" />
<copy todir= "${build.classes.dir}/META-INF" >
<fileset dir= "${meta.inf.dir}" includes= "persistence.xml" />
</copy>
</target>
<target name= "-post-compile" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description= "Compile project." name= "compile" />
<target name= "-pre-compile-single" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,deps-jar,-pre-pre-compile" name= "-do-compile-single" >
<fail unless= "javac.includes" > Must select some files in the IDE or set javac.includes</fail>
<j2seproject3:force-recompile />
<j2seproject3:javac excludes= "" gensrcdir= "${build.generated.sources.dir}" includes= "${javac.includes}" sourcepath= "${src.dir}" />
</target>
<target name= "-post-compile-single" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name= "compile-single" />
<!--
====================
JAR BUILDING SECTION
====================
-->
<target depends= "init" name= "-pre-pre-jar" >
<dirname file= "${dist.jar}" property= "dist.jar.dir" />
<mkdir dir= "${dist.jar.dir}" />
</target>
<target name= "-pre-jar" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,compile,-pre-pre-jar,-pre-jar" if= "do.archive" name= "-do-jar-without-manifest" unless= "manifest.available" >
<j2seproject1:jar />
</target>
<target depends= "init,compile,-pre-pre-jar,-pre-jar" if= "do.archive+manifest.available" name= "-do-jar-with-manifest" unless= "manifest.available+main.class" >
<j2seproject1:jar manifest= "${manifest.file}" />
</target>
<target depends= "init,compile,-pre-pre-jar,-pre-jar" if= "do.archive+manifest.available+main.class" name= "-do-jar-with-mainclass" unless= "manifest.available+main.class+mkdist.available" >
<j2seproject1:jar manifest= "${manifest.file}" >
<j2seproject1:manifest >
<j2seproject1:attribute name= "Main-Class" value= "${main.class}" />
</j2seproject1:manifest>
</j2seproject1:jar>
<echo > To run this application from the command line without Ant, try:</echo>
<property location= "${build.classes.dir}" name= "build.classes.dir.resolved" />
<property location= "${dist.jar}" name= "dist.jar.resolved" />
<pathconvert property= "run.classpath.with.dist.jar" >
<path path= "${run.classpath}" />
<map from= "${build.classes.dir.resolved}" to= "${dist.jar.resolved}" />
</pathconvert>
<echo > java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
</target>
<target depends= "init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if= "do.archive+manifest.available+main.class+mkdist.available+splashscreen.available" name= "-do-jar-with-libraries-and-splashscreen" >
<basename file= "${application.splash}" property= "splashscreen.basename" />
<mkdir dir= "${build.classes.dir}/META-INF" />
<copy failonerror= "false" file= "${application.splash}" todir= "${build.classes.dir}/META-INF" />
<j2seproject3:copylibs >
<customize >
<attribute name= "Main-Class" value= "${main.class}" />
<attribute name= "SplashScreen-Image" value= "META-INF/${splashscreen.basename}" />
</customize>
</j2seproject3:copylibs>
<echo > To run this application from the command line without Ant, try:</echo>
<property location= "${dist.jar}" name= "dist.jar.resolved" />
<echo > java -jar "${dist.jar.resolved}"</echo>
</target>
<target depends= "init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if= "do.archive+manifest.available+main.class+mkdist.available" name= "-do-jar-with-libraries" unless= "splashscreen.available" >
<j2seproject3:copylibs >
<customize >
<attribute name= "Main-Class" value= "${main.class}" />
</customize>
</j2seproject3:copylibs>
<echo > To run this application from the command line without Ant, try:</echo>
<property location= "${dist.jar}" name= "dist.jar.resolved" />
<echo > java -jar "${dist.jar.resolved}"</echo>
</target>
<target name= "-post-jar" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries-and-splashscreen,-do-jar-with-libraries,-post-jar" description= "Build JAR." name= "jar" />
<!--
=================
EXECUTION SECTION
=================
-->
<target depends= "init,compile" description= "Run a main class." name= "run" >
<j2seproject1:java >
<customize >
<arg line= "${application.args}" />
</customize>
</j2seproject1:java>
</target>
<target name= "-do-not-recompile" >
<property name= "javac.includes.binary" value= "" />
</target>
<target depends= "init,compile-single" name= "run-single" >
<fail unless= "run.class" > Must select one file in the IDE or set run.class</fail>
<j2seproject1:java classname= "${run.class}" />
</target>
<target depends= "init,compile-test-single" name= "run-test-with-main" >
<fail unless= "run.class" > Must select one file in the IDE or set run.class</fail>
<j2seproject1:java classname= "${run.class}" classpath= "${run.test.classpath}" />
</target>
<!--
=================
DEBUGGING SECTION
=================
-->
<target depends= "init" if= "netbeans.home" name= "-debug-start-debugger" >
<j2seproject1:nbjpdastart name= "${debug.class}" />
</target>
<target depends= "init" if= "netbeans.home" name= "-debug-start-debugger-main-test" >
<j2seproject1:nbjpdastart classpath= "${debug.test.classpath}" name= "${debug.class}" />
</target>
<target depends= "init,compile" name= "-debug-start-debuggee" >
<j2seproject3:debug >
<customize >
<arg line= "${application.args}" />
</customize>
</j2seproject3:debug>
</target>
<target depends= "init,compile,-debug-start-debugger,-debug-start-debuggee" description= "Debug project in IDE." if= "netbeans.home" name= "debug" />
<target depends= "init" if= "netbeans.home" name= "-debug-start-debugger-stepinto" >
<j2seproject1:nbjpdastart stopclassname= "${main.class}" />
</target>
<target depends= "init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if= "netbeans.home" name= "debug-stepinto" />
<target depends= "init,compile-single" if= "netbeans.home" name= "-debug-start-debuggee-single" >
<fail unless= "debug.class" > Must select one file in the IDE or set debug.class</fail>
<j2seproject3:debug classname= "${debug.class}" />
</target>
<target depends= "init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if= "netbeans.home" name= "debug-single" />
<target depends= "init,compile-test-single" if= "netbeans.home" name= "-debug-start-debuggee-main-test" >
<fail unless= "debug.class" > Must select one file in the IDE or set debug.class</fail>
<j2seproject3:debug classname= "${debug.class}" classpath= "${debug.test.classpath}" />
</target>
<target depends= "init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if= "netbeans.home" name= "debug-test-with-main" />
<target depends= "init" name= "-pre-debug-fix" >
<fail unless= "fix.includes" > Must set fix.includes</fail>
<property name= "javac.includes" value= "${fix.includes}.java" />
</target>
<target depends= "init,-pre-debug-fix,compile-single" if= "netbeans.home" name= "-do-debug-fix" >
<j2seproject1:nbjpdareload />
</target>
<target depends= "init,-pre-debug-fix,-do-debug-fix" if= "netbeans.home" name= "debug-fix" />
<!--
===============
JAVADOC SECTION
===============
-->
<target depends= "init" if= "have.sources" name= "-javadoc-build" >
<mkdir dir= "${dist.javadoc.dir}" />
<javadoc additionalparam= "${javadoc.additionalparam}" author= "${javadoc.author}" charset= "UTF-8" destdir= "${dist.javadoc.dir}" docencoding= "UTF-8" encoding= "${javadoc.encoding.used}" failonerror= "true" noindex= "${javadoc.noindex}" nonavbar= "${javadoc.nonavbar}" notree= "${javadoc.notree}" private= "${javadoc.private}" source= "${javac.source}" splitindex= "${javadoc.splitindex}" use= "${javadoc.use}" useexternalfile= "true" version= "${javadoc.version}" windowtitle= "${javadoc.windowtitle}" >
<classpath >
<path path= "${javac.classpath}" />
</classpath>
<fileset dir= "${src.dir}" excludes= "${excludes}" includes= "${includes}" >
<filename name= "**/*.java" />
</fileset>
<fileset dir= "${build.generated.sources.dir}" erroronmissingdir= "false" >
<include name= "**/*.java" />
</fileset>
</javadoc>
<copy todir= "${dist.javadoc.dir}" >
<fileset dir= "${src.dir}" excludes= "${excludes}" includes= "${includes}" >
<filename name= "**/doc-files/**" />
</fileset>
<fileset dir= "${build.generated.sources.dir}" erroronmissingdir= "false" >
<include name= "**/doc-files/**" />
</fileset>
</copy>
</target>
<target depends= "init,-javadoc-build" if= "netbeans.home" name= "-javadoc-browse" unless= "no.javadoc.preview" >
<nbbrowse file= "${dist.javadoc.dir}/index.html" />
</target>
<target depends= "init,-javadoc-build,-javadoc-browse" description= "Build Javadoc." name= "javadoc" />
<!--
=========================
JUNIT COMPILATION SECTION
=========================
-->
<target depends= "init,compile" if= "have.tests" name= "-pre-pre-compile-test" >
<mkdir dir= "${build.test.classes.dir}" />
</target>
<target name= "-pre-compile-test" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target if= "do.depend.true" name= "-compile-test-depend" >
2011-02-22 13:18:27 +01:00
<j2seproject3:depend classpath= "${javac.test.classpath}" destdir= "${build.test.classes.dir}" srcdir= "${test.tests.dir}" />
2011-02-22 13:03:06 +01:00
</target>
<target depends= "init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if= "have.tests" name= "-do-compile-test" >
2011-02-22 13:18:27 +01:00
<j2seproject3:javac apgeneratedsrcdir= "${build.test.classes.dir}" classpath= "${javac.test.classpath}" debug= "true" destdir= "${build.test.classes.dir}" processorpath= "${javac.test.processorpath}" srcdir= "${test.tests.dir}" />
2011-02-22 13:03:06 +01:00
<copy todir= "${build.test.classes.dir}" >
2011-02-22 13:18:27 +01:00
<fileset dir= "${test.tests.dir}" excludes= "${build.classes.excludes},${excludes}" includes= "${includes}" />
2011-02-22 13:03:06 +01:00
</copy>
</target>
<target name= "-post-compile-test" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name= "compile-test" />
<target name= "-pre-compile-test-single" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,compile,-pre-pre-compile-test,-pre-compile-test-single" if= "have.tests" name= "-do-compile-test-single" >
<fail unless= "javac.includes" > Must select some files in the IDE or set javac.includes</fail>
<j2seproject3:force-recompile destdir= "${build.test.classes.dir}" />
2011-02-22 13:18:27 +01:00
<j2seproject3:javac apgeneratedsrcdir= "${build.test.classes.dir}" classpath= "${javac.test.classpath}" debug= "true" destdir= "${build.test.classes.dir}" excludes= "" includes= "${javac.includes}" processorpath= "${javac.test.processorpath}" sourcepath= "${test.tests.dir}" srcdir= "${test.tests.dir}" />
2011-02-22 13:03:06 +01:00
<copy todir= "${build.test.classes.dir}" >
2011-02-22 13:18:27 +01:00
<fileset dir= "${test.tests.dir}" excludes= "${build.classes.excludes},${excludes}" includes= "${includes}" />
2011-02-22 13:03:06 +01:00
</copy>
</target>
<target name= "-post-compile-test-single" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name= "compile-test-single" />
<!--
=======================
JUNIT EXECUTION SECTION
=======================
-->
<target depends= "init" if= "have.tests" name= "-pre-test-run" >
<mkdir dir= "${build.test.results.dir}" />
</target>
<target depends= "init,compile-test,-pre-test-run" if= "have.tests" name= "-do-test-run" >
<j2seproject3:junit testincludes= "**/*Test.java" />
</target>
<target depends= "init,compile-test,-pre-test-run,-do-test-run" if= "have.tests" name= "-post-test-run" >
<fail if= "tests.failed" unless= "ignore.failing.tests" > Some tests failed; see details above.</fail>
</target>
<target depends= "init" if= "have.tests" name= "test-report" />
<target depends= "init" if= "netbeans.home+have.tests" name= "-test-browse" />
<target depends= "init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description= "Run unit tests." name= "test" />
<target depends= "init" if= "have.tests" name= "-pre-test-run-single" >
<mkdir dir= "${build.test.results.dir}" />
</target>
<target depends= "init,compile-test-single,-pre-test-run-single" if= "have.tests" name= "-do-test-run-single" >
<fail unless= "test.includes" > Must select some files in the IDE or set test.includes</fail>
<j2seproject3:junit excludes= "" includes= "${test.includes}" />
</target>
<target depends= "init,compile-test-single,-pre-test-run-single,-do-test-run-single" if= "have.tests" name= "-post-test-run-single" >
<fail if= "tests.failed" unless= "ignore.failing.tests" > Some tests failed; see details above.</fail>
</target>
<target depends= "init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description= "Run single unit test." name= "test-single" />
<!--
=======================
JUNIT DEBUGGING SECTION
=======================
-->
<target depends= "init,compile-test" if= "have.tests" name= "-debug-start-debuggee-test" >
<fail unless= "test.class" > Must select one file in the IDE or set test.class</fail>
<property location= "${build.test.results.dir}/TEST-${test.class}.xml" name= "test.report.file" />
<delete file= "${test.report.file}" />
<mkdir dir= "${build.test.results.dir}" />
<j2seproject3:debug classname= "org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath= "${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}" >
<customize >
<syspropertyset >
<propertyref prefix= "test-sys-prop." />
<mapper from= "test-sys-prop.*" to= "*" type= "glob" />
</syspropertyset>
<arg value= "${test.class}" />
<arg value= "showoutput=true" />
<arg value= "formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter" />
<arg value= "formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}" />
</customize>
</j2seproject3:debug>
</target>
<target depends= "init,compile-test" if= "netbeans.home+have.tests" name= "-debug-start-debugger-test" >
<j2seproject1:nbjpdastart classpath= "${debug.test.classpath}" name= "${test.class}" />
</target>
<target depends= "init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name= "debug-test" />
<target depends= "init,-pre-debug-fix,compile-test-single" if= "netbeans.home" name= "-do-debug-fix-test" >
<j2seproject1:nbjpdareload dir= "${build.test.classes.dir}" />
</target>
<target depends= "init,-pre-debug-fix,-do-debug-fix-test" if= "netbeans.home" name= "debug-fix-test" />
<!--
=========================
APPLET EXECUTION SECTION
=========================
-->
<target depends= "init,compile-single" name= "run-applet" >
<fail unless= "applet.url" > Must select one file in the IDE or set applet.url</fail>
<j2seproject1:java classname= "sun.applet.AppletViewer" >
<customize >
<arg value= "${applet.url}" />
</customize>
</j2seproject1:java>
</target>
<!--
=========================
APPLET DEBUGGING SECTION
=========================
-->
<target depends= "init,compile-single" if= "netbeans.home" name= "-debug-start-debuggee-applet" >
<fail unless= "applet.url" > Must select one file in the IDE or set applet.url</fail>
<j2seproject3:debug classname= "sun.applet.AppletViewer" >
<customize >
<arg value= "${applet.url}" />
</customize>
</j2seproject3:debug>
</target>
<target depends= "init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if= "netbeans.home" name= "debug-applet" />
<!--
===============
CLEANUP SECTION
===============
-->
<target name= "-deps-clean-init" unless= "built-clean.properties" >
<property location= "${build.dir}/built-clean.properties" name= "built-clean.properties" />
<delete file= "${built-clean.properties}" quiet= "true" />
</target>
<target if= "already.built.clean.${basedir}" name= "-warn-already-built-clean" >
<echo level= "warn" message= "Cycle detected: worldguard was already built" />
</target>
<target depends= "init,-deps-clean-init" name= "deps-clean" unless= "no.deps" >
<mkdir dir= "${build.dir}" />
<touch file= "${built-clean.properties}" verbose= "false" />
<property file= "${built-clean.properties}" prefix= "already.built.clean." />
<antcall target= "-warn-already-built-clean" />
<propertyfile file= "${built-clean.properties}" >
<entry key= "${basedir}" value= "" />
</propertyfile>
</target>
<target depends= "init" name= "-do-clean" >
<delete dir= "${build.dir}" />
<delete dir= "${dist.dir}" followsymlinks= "false" includeemptydirs= "true" />
</target>
<target name= "-post-clean" >
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends= "init,deps-clean,-do-clean,-post-clean" description= "Clean build products." name= "clean" />
<target name= "-check-call-dep" >
<property file= "${call.built.properties}" prefix= "already.built." />
<condition property= "should.call.dep" >
<not >
<isset property= "already.built.${call.subproject}" />
</not>
</condition>
</target>
<target depends= "-check-call-dep" if= "should.call.dep" name= "-maybe-call-dep" >
<ant antfile= "${call.script}" inheritall= "false" target= "${call.target}" >
<propertyset >
<propertyref prefix= "transfer." />
<mapper from= "transfer.*" to= "*" type= "glob" />
</propertyset>
</ant>
</target>
</project>
