diff --git a/Components/hal/target/CC2530ZNP/hal_board_cfg.h b/Components/hal/target/CC2530ZNP/hal_board_cfg.h
index 4af8164..4be21ca 100644
--- a/Components/hal/target/CC2530ZNP/hal_board_cfg.h
+++ b/Components/hal/target/CC2530ZNP/hal_board_cfg.h
@@ -314,7 +314,7 @@ extern unsigned char znpCfg0;
  */
 
 /* ----------- RF-frontend Connection Initialization ---------- */
-#if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2590
+#if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2590 || defined HAL_PA_LNA_CC2592
 extern void MAC_RfFrontendSetup(void);
 #define HAL_BOARD_RF_FRONTEND_SETUP() MAC_RfFrontendSetup()
 #else
@@ -343,7 +343,7 @@ extern void MAC_RfFrontendSetup(void);
 #endif
 
 /* ----------- Board Initialization ---------- */
-#if defined (HAL_BOARD_CC2530EB_REV17) && !defined (HAL_PA_LNA) && !defined (HAL_PA_LNA_CC2590)
+#if defined (HAL_BOARD_CC2530EB_REV17) && !defined (HAL_PA_LNA) && !defined (HAL_PA_LNA_CC2590) && !defined (HAL_PA_LNA_CC2592)
 
 #define HAL_BOARD_INIT() st                                      \
 (                                                                \
@@ -362,7 +362,7 @@ extern void MAC_RfFrontendSetup(void);
   PREFETCH_ENABLE();                                             \
 )
 
-#elif defined (HAL_BOARD_CC2530EB_REV13) || defined (HAL_PA_LNA) || defined (HAL_PA_LNA_CC2590)
+#elif defined (HAL_BOARD_CC2530EB_REV13) || defined (HAL_PA_LNA) || defined (HAL_PA_LNA_CC2590) || defined (HAL_PA_LNA_CC2592)
 
 #ifdef HAL_ENABLE_WIFI_COEX_PINS
 #define HAL_BOARD_ENABLE_WIFI_COEX_PINS() st                                      \
diff --git a/Components/mt/MT_SYS.c b/Components/mt/MT_SYS.c
index aa57766..f80e1e5 100644
--- a/Components/mt/MT_SYS.c
+++ b/Components/mt/MT_SYS.c
@@ -2141,6 +2141,21 @@ static void MT_SysSnifferParameters( uint8 *pBuf )
  *****************************************************************************/
 static void powerOffSoc(void)
 {
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
+  HAL_DISABLE_INTERRUPTS();
+  STIF = 0; //HAL_SLEEP_TIMER_CLEAR_INT;
+  if (ZNP_CFG1_UART == znpCfg1)
+  {
+    HalUARTSuspend();
+  }
+
+  /* Prep CC2530 power mode */
+  //HAL_SLEEP_PREP_POWER_MODE(3);
+  SLEEPCMD &= ~PMODE; /* clear mode bits */
+  SLEEPCMD |= 3;      /* set mode bits  to PM3 */
+  while (!(STLOAD & LDRDY));
+  SystemReset();
+#else
   HAL_DISABLE_INTERRUPTS();
 
   /* turn off the RF front end device */
@@ -2181,6 +2196,7 @@ static void powerOffSoc(void)
     PCON = halSleepPconValue;
     asm("NOP");
   }
+#endif
 }
 #endif
 
diff --git a/Components/mt/MT_VERSION.c b/Components/mt/MT_VERSION.c
index f374554..720a8fe 100644
--- a/Components/mt/MT_VERSION.c
+++ b/Components/mt/MT_VERSION.c
@@ -21,7 +21,7 @@
   its documentation for any purpose.
 
   YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
-  PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
+  PROVIDED �AS IS� WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
   INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
   NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
   TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
@@ -69,7 +69,7 @@
  *****************************************************************************/
 const uint8 MTVersionString[] = {
                                    2,  /* Transport protocol revision */
-                                   0,  /* Product ID */
+                                   2,  /* Product ID */
                                    2,  /* Software major release number */
                                    7,  /* Software minor release number */
                                    2,  /* Software maintenance release number */
diff --git a/Components/mt/revision_info.h b/Components/mt/revision_info.h
new file mode 100644
index 0000000..34cd616
--- /dev/null
+++ b/Components/mt/revision_info.h
@@ -0,0 +1 @@
+#define CODE_REVISION_NUMBER 20190523
\ No newline at end of file
diff --git a/Components/stack/af/AF.c b/Components/stack/af/AF.c
index 5e54237..988416f 100644
--- a/Components/stack/af/AF.c
+++ b/Components/stack/af/AF.c
@@ -405,10 +405,18 @@ void afIncomingData( aps_FrameFormat_t *aff, zAddrType_t *SrcAddress, uint16 Src
 #if !defined ( APS_NO_GROUPS )
     // Find the first endpoint for this group
     grpEp = aps_FindGroupForEndpoint( aff->GroupID, APS_GROUPS_FIND_FIRST );
-    if ( grpEp == APS_GROUPS_EP_NOT_FOUND )
-      return;   // No endpoint found
+    if ( grpEp == APS_GROUPS_EP_NOT_FOUND ) {
+      // No endpoint found, default to endpoint 1.
+      // In the original source code there is a return here. 
+      // This prevent the messags from being forwarded.
+      // For our use-case we want to capture all messages. 
+      // Even if the coordinator is not in the group.
+      epDesc = afFindEndPointDesc( 1 );
+    }
+    else {
+      epDesc = afFindEndPointDesc( grpEp );
+    }
 
-    epDesc = afFindEndPointDesc( grpEp );
     if ( epDesc == NULL )
       return;   // Endpoint descriptor not found
 
@@ -425,6 +433,12 @@ void afIncomingData( aps_FrameFormat_t *aff, zAddrType_t *SrcAddress, uint16 Src
       epDesc = pList->epDesc;
     }
   }
+  else if ( aff->DstEndPoint == 10 || aff->DstEndPoint == 11 ) {
+    if ( (epDesc = afFindEndPointDesc( 1 )) )
+    {
+      pList = afFindEndPointDescList( epDesc->endPoint );
+    }
+  }
   else if ( (epDesc = afFindEndPointDesc( aff->DstEndPoint )) )
   {
     pList = afFindEndPointDescList( epDesc->endPoint );
diff --git a/Components/stack/sys/ZGlobals.c b/Components/stack/sys/ZGlobals.c
index d170283..292659a 100644
--- a/Components/stack/sys/ZGlobals.c
+++ b/Components/stack/sys/ZGlobals.c
@@ -212,7 +212,11 @@ uint8 zgEndDeviceConfiguration = END_DEV_CONFIGURATION;
 //
 // NOTICE:  Before enabling Child Aging make sure to review all the related
 // definitions in this file, especially zgNwkParentInformation.
-uint8 zgChildAgingEnable = TRUE;
+
+/**
+ * Disable child aging, otherwise Xiaomi devices are being kicked off the network.
+ */
+uint8 zgChildAgingEnable = FALSE;
 
 //==========    TouchLink NWK configuration    ===============
 // Values used by Router when starts a network as initiator
diff --git a/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c b/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
index eebe038..dcc2618 100644
--- a/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
+++ b/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
@@ -149,8 +149,17 @@ void InitBoard( uint8 level )
 
 #if defined CC2531ZNP
     znpCfg1 = ZNP_CFG1_UART;
+#elif defined FIRMWARE_CC2530_CC2591 || defined(FIRMWARE_CC2530_CC2592)
+    znpCfg1 = ZNP_CFG1_UART;
+    znpCfg0 = ZNP_CFG0_32K_OSC;
 #elif defined CC2530_MK
+    
+  #if defined FIRMWARE_CC2530
+    znpCfg1 = ZNP_CFG1_UART;
+  #else
     znpCfg1 = ZNP_CFG1_SPI;
+  #endif
+    
     znpCfg0 = ZNP_CFG0_32K_OSC;
 #else
     znpCfg1 = P2_0;
diff --git a/Projects/zstack/ZNP/Source/preinclude.h b/Projects/zstack/ZNP/Source/preinclude.h
new file mode 100644
index 0000000..2f5a0c6
--- /dev/null
+++ b/Projects/zstack/ZNP/Source/preinclude.h
@@ -0,0 +1,95 @@
+#if defined FIRMWARE_SBL
+  #define MAKE_CRC_SHDW
+#else
+  #define FAKE_CRC_SHDW
+#endif
+
+// Shared accross all firmwares
+#define TC_LINKKEY_JOIN
+#define ASSERT_RESET
+#define INCLUDE_REVISION_INFORMATION
+#define SECURE 1
+#define BDB_FINDING_BINDING_CAPABILITY_ENABLED 0
+#define ZDSECMGR_TC_DEVICE_MAX 40
+#define DISABLE_GREENPOWER_BASIC_PROXY
+#define MT_SYS_KEY_MANAGEMENT 1
+#define TP2_LEGACY_ZC
+
+// Increase NWK_LINK_STATUS_PERIOD to reduce amount of messages on the network
+#define NWK_LINK_STATUS_PERIOD 60
+
+// Save memory
+#undef NWK_MAX_BINDING_ENTRIES
+#define NWK_MAX_BINDING_ENTRIES 1
+#undef APS_MAX_GROUPS
+#define APS_MAX_GROUPS 1
+
+// Disabling MULTICAST is required in order for proper group support.
+// If MULTICAST is not disabled, the group adress is not included in the APS header
+#define MULTICAST_ENABLED FALSE
+
+// Save memory, see swra635.pdf
+#define HAL_LCD FALSE
+#define HAL_ADC FALSE
+
+/**
+ * Reduce BCAST_DELIVERY_TIME and increase MAX_BCAST time.
+ * BCAST_DELIVERY_TIME is the length of time a broadcast message is kept in the broadcast table
+ * MAX_BCAST is the max number of messages that are in the broadcast table
+ * If e.g. BCAST_DELIVERY_TIME = 1 second and MAX_BCAST = 10; 10 broadcast messages per second can be send.
+ * 
+ * Zigbee2mqtt has a fixed delay of 170ms between each command.
+ * Therefore a BCAST_DELIVERY_TIME = 20 (= 2 seconds) and MAX_BCAST = 12 allows us to send
+ * 2 / 12 = 1 group command per 166ms, which is just below the zigbee2mqtt delay.
+ * Therefore the broadcast table will never get full.
+ */
+#define BCAST_DELIVERY_TIME 20
+#undef MAX_BCAST // avoids incompatible redefinition of macro warning
+#define MAX_BCAST 12
+
+/** 
+ * Enable MTO routing, but disable source routing.
+ * https://github.com/Koenkk/zigbee2mqtt/issues/1408
+ */
+#define CONCENTRATOR_ENABLE TRUE
+#define CONCENTRATOR_ROUTE_CACHE FALSE
+#define CONCENTRATOR_DISCOVERY_TIME 120
+#define MAX_RTG_SRC_ENTRIES 1 // Source table is not used, reduce to minimal size
+#undef MAX_RTG_ENTRIES
+#define MAX_RTG_ENTRIES 40
+#define MAX_NEIGHBOR_ENTRIES 8
+
+// CC2531
+#if defined FIRMWARE_CC2531
+  #define NWK_MAX_DEVICE_LIST 15
+  #define CC2531ZNP
+  #define MAXMEMHEAP 3203 
+
+// CC2530
+#elif defined FIRMWARE_CC2530
+  #define HAL_UART_DMA_RX_MAX 128
+  #define ENABLE_MT_SYS_RESET_SHUTDOWN
+  #define ZTOOL_P1
+  #define CC2530_MK
+  #define NWK_MAX_DEVICE_LIST 10
+  #define MAXMEMHEAP 3225
+
+// CC2530 + CC2591
+#elif defined FIRMWARE_CC2530_CC2591
+  #define ENABLE_MT_SYS_RESET_SHUTDOWN
+  #define ZTOOL_P1
+  #define HAL_UART_DMA_RX_MAX 128
+  #define HAL_PA_LNA
+  #define NWK_MAX_DEVICE_LIST 10
+  #define MAXMEMHEAP 3223
+
+// CC2530 + CC2592
+#elif defined FIRMWARE_CC2530_CC2592
+  #define ENABLE_MT_SYS_RESET_SHUTDOWN
+  #define ZTOOL_P1
+  #define HAL_UART_DMA_RX_MAX 128
+  #define HAL_PA_LNA_CC2592
+  #define NWK_MAX_DEVICE_LIST 10
+  #define MAXMEMHEAP 3223
+
+#endif
\ No newline at end of file
diff --git a/Projects/zstack/ZNP/Source/znp.cfg b/Projects/zstack/ZNP/Source/znp.cfg
index 2b8d56d..adb5e42 100644
--- a/Projects/zstack/ZNP/Source/znp.cfg
+++ b/Projects/zstack/ZNP/Source/znp.cfg
@@ -107,3 +107,4 @@
 -DMT_APP_FUNC
 -DMT_APP_CNF_FUNC
 
+--preinclude=preinclude.h
\ No newline at end of file
diff --git a/Projects/zstack/ZNP/Source/znp_app.c b/Projects/zstack/ZNP/Source/znp_app.c
index 31b115e..e8bd3ab 100644
--- a/Projects/zstack/ZNP/Source/znp_app.c
+++ b/Projects/zstack/ZNP/Source/znp_app.c
@@ -390,12 +390,23 @@ static void npInit(void)
     halUARTCfg_t uartConfig;
 
     uartConfig.configured           = TRUE;
+    
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
+    uartConfig.baudRate             = HAL_UART_BR_115200;
+#else
     uartConfig.baudRate             = ZNP_UART_BAUD;
-#ifdef ZNP_ALT
+#endif
+
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
     uartConfig.flowControl          = FALSE;
 #else
+  #ifdef ZNP_ALT
+    uartConfig.flowControl          = FALSE;
+  #else
     uartConfig.flowControl          = TRUE;
+  #endif
 #endif
+ 
     uartConfig.flowControlThreshold = HAL_UART_FLOW_THRESHOLD;
     uartConfig.rx.maxBufSize        = HAL_UART_RX_BUF_SIZE;
     uartConfig.tx.maxBufSize        = HAL_UART_TX_BUF_SIZE;
@@ -405,11 +416,14 @@ static void npInit(void)
     HalUARTOpen(HAL_UART_PORT, &uartConfig);
     MT_UartRegisterTaskID(znpTaskId);
 
-#ifdef HAL_PA_LNA_CC2592
-   ZMacSetTransmitPower(TX_PWR_PLUS_19);
-#else
-   ZMacSetTransmitPower(TX_PWR_PLUS_4);
-#endif 
+#if defined FIRMWARE_CC2530_CC2591 || defined(FIRMWARE_CC2530_CC2592)
+    //Add TX Setting
+    #if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2592
+      ZMacSetTransmitPower(TX_PWR_PLUS_19);
+    #else
+      ZMacSetTransmitPower(TX_PWR_PLUS_4);
+    #endif
+#endif
   }
   else
   {