Z-Stack-firmware/coordinator/CC2530

CC2530 coordinator firmware

1. Open Z-Stack Home 1.2.2a.44539\Projects\zstack\ZNP\CC253x\znp.eww with IAR Embedded workbench for 8051.
2. You will get a warning: The project file 'CC253(0/1).ewp' is in an old format. Would you like to convert it for use with this version?. Press yes for both.
3. In the dropdown, set target to CC2530 - ProdHex. Edit following: OnBoard.c find:

 #elif defined CC2530_MK
   znpCfg1 = ZNP_CFG1_SPI;

Replace ZNP_CFG1_SPI with ZNP_CFG1_UART. znp_app.c find:

if (ZNP_CFG1_UART == znpCfg1)

And replace by:

uartConfig.baudRate = HAL_UART_BR_115200;
uartConfig.flowControl = FALSE;//Old value true

Edit file Components\mt\MT_SYS.c replace powerOffSoc(void) with:

  HAL_DISABLE_INTERRUPTS();
  STIF = 0; //HAL_SLEEP_TIMER_CLEAR_INT;
  if (ZNP_CFG1_UART == znpCfg1)
  {
    HalUARTSuspend();
  }

  /* Prep CC2530 power mode */
  //HAL_SLEEP_PREP_POWER_MODE(3);
  SLEEPCMD &= ~PMODE; /* clear mode bits */
  SLEEPCMD |= 3;      /* set mode bits  to PM3 */
  while (!(STLOAD & LDRDY));
  SystemReset();

4. Right-click on CC2530 - ProdHex* and press options. Go to C/C++ compiler -> preprocessor. Change the Defined symbols to:

FEATURE_SYSTEM_STATS
ASSERT_RESET
xPOWER_SAVING
FAKE_CRC_SHDW
TC_LINKKEY_JOIN
ENABLE_MT_SYS_RESET_SHUTDOWN
SECURE=1
INTER_PAN
ZTOOL_P1
CC2530_MK
HAL_LCD=FALSE
HAL_ADC=FALSE
HAL_UART_DMA_RX_MAX=128
NWK_MAX_DEVICE_LIST=15
MAX_NEIGHBOR_ENTRIES=10
MAXMEMHEAP=3120
INCLUDE_REVISION_INFORMATION

7. Create Z-Stack Home 1.2.2a.44539\Components\mt\revision_info.h with contents #define CODE_REVISION_NUMBER 20182308.
8. Right-click on CC2530 - ProdHex* and click Rebuild all.
9. Once finished, you can find the CC2530ZNP-Prod.hex file in Z-Stack Home 1.2.2a.44539\Projects\zstack\ZNP\CC253x\dev.