Upstream/Z-Stack-firmware
1
0
Fork 0
mirror of https://github.com/Koenkk/Z-Stack-firmware.git synced 2024-07-03 08:34:42 +02:00
Code Issues Projects Releases Wiki Activity
4825bb24a0
Z-Stack-firmware/coordinator/Z-Stack_Home_1.2/firmware.patch

317 lines
11 KiB
Diff
Raw Blame History

diff --git a/Components/hal/target/CC2530ZNP/hal_board_cfg.h b/Components/hal/target/CC2530ZNP/hal_board_cfg.h
index 0459c86..1e40362 100644
--- a/Components/hal/target/CC2530ZNP/hal_board_cfg.h
+++ b/Components/hal/target/CC2530ZNP/hal_board_cfg.h
@@ -314,7 +314,7 @@ extern unsigned char znpCfg0;
*/
/* ----------- RF-frontend Connection Initialization ---------- */
-#if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2590
+#if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2590 || defined HAL_PA_LNA_CC2592
extern void MAC_RfFrontendSetup(void);
#define HAL_BOARD_RF_FRONTEND_SETUP() MAC_RfFrontendSetup()
#else
@@ -343,7 +343,7 @@ extern void MAC_RfFrontendSetup(void);
#endif
/* ----------- Board Initialization ---------- */
-#if defined (HAL_BOARD_CC2530EB_REV17) && !defined (HAL_PA_LNA) && !defined (HAL_PA_LNA_CC2590)
+#if defined (HAL_BOARD_CC2530EB_REV17) && !defined (HAL_PA_LNA) && !defined (HAL_PA_LNA_CC2590) && !defined (HAL_PA_LNA_CC2592)
#define HAL_BOARD_INIT() st \
( \
@@ -362,7 +362,7 @@ extern void MAC_RfFrontendSetup(void);
PREFETCH_ENABLE(); \
)
-#elif defined (HAL_BOARD_CC2530EB_REV13) || defined (HAL_PA_LNA) || defined (HAL_PA_LNA_CC2590)
+#elif defined (HAL_BOARD_CC2530EB_REV13) || defined (HAL_PA_LNA) || defined (HAL_PA_LNA_CC2590)|| defined (HAL_PA_LNA_CC2592)
#ifdef HAL_ENABLE_WIFI_COEX_PINS
#define HAL_BOARD_ENABLE_WIFI_COEX_PINS() st \
diff --git a/Components/mt/MT_SYS.c b/Components/mt/MT_SYS.c
index 35aae57..1f8ee82 100644
--- a/Components/mt/MT_SYS.c
+++ b/Components/mt/MT_SYS.c
@@ -2141,6 +2141,21 @@ static void MT_SysSnifferParameters( uint8 *pBuf )
*****************************************************************************/
static void powerOffSoc(void)
{
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
+ HAL_DISABLE_INTERRUPTS();
+ STIF = 0; //HAL_SLEEP_TIMER_CLEAR_INT;
+ if (ZNP_CFG1_UART == znpCfg1)
+ {
+ HalUARTSuspend();
+ }
+
+ /* Prep CC2530 power mode */
+ //HAL_SLEEP_PREP_POWER_MODE(3);
+ SLEEPCMD &= ~PMODE; /* clear mode bits */
+ SLEEPCMD |= 3; /* set mode bits to PM3 */
+ while (!(STLOAD & LDRDY));
+ SystemReset();
+#else
HAL_DISABLE_INTERRUPTS();
/* turn off the RF front end device */
@@ -2181,6 +2196,7 @@ static void powerOffSoc(void)
PCON = halSleepPconValue;
asm("NOP");
}
+#endif
}
#endif
diff --git a/Components/mt/revision_info.h b/Components/mt/revision_info.h
new file mode 100644
index 0000000..f42acc8
--- /dev/null
+++ b/Components/mt/revision_info.h
@@ -0,0 +1 @@
+#define CODE_REVISION_NUMBER 20190513
\ No newline at end of file
diff --git a/Components/stack/af/AF.c b/Components/stack/af/AF.c
index c6183b6..2b885b6 100644
--- a/Components/stack/af/AF.c
+++ b/Components/stack/af/AF.c
@@ -372,10 +372,18 @@ void afIncomingData( aps_FrameFormat_t *aff, zAddrType_t *SrcAddress, uint16 Src
#if !defined ( APS_NO_GROUPS )
// Find the first endpoint for this group
grpEp = aps_FindGroupForEndpoint( aff->GroupID, APS_GROUPS_FIND_FIRST );
- if ( grpEp == APS_GROUPS_EP_NOT_FOUND )
- return; // No endpoint found
-
- epDesc = afFindEndPointDesc( grpEp );
+ if ( grpEp == APS_GROUPS_EP_NOT_FOUND ) {
+ // No endpoint found, default to endpoint 1.
+ // In the original source code there is a return here.
+ // This prevent the messags from being forwarded.
+ // For our use-case we want to capture all messages.
+ // Even if the coordinator is not in the group.
+ epDesc = afFindEndPointDesc( 1 );
+ }
+ else {
+ epDesc = afFindEndPointDesc( grpEp );
+ }
+
if ( epDesc == NULL )
return; // Endpoint descriptor not found
@@ -392,6 +400,12 @@ void afIncomingData( aps_FrameFormat_t *aff, zAddrType_t *SrcAddress, uint16 Src
epDesc = pList->epDesc;
}
}
+ else if ( aff->DstEndPoint == 10 || aff->DstEndPoint == 11 ) {
+ if ( (epDesc = afFindEndPointDesc( 1 )) )
+ {
+ pList = afFindEndPointDescList( epDesc->endPoint );
+ }
+ }
else if ( (epDesc = afFindEndPointDesc( aff->DstEndPoint )) )
{
pList = afFindEndPointDescList( epDesc->endPoint );
diff --git a/Components/stack/zdo/ZDApp.c b/Components/stack/zdo/ZDApp.c
index 242be04..cca4781 100644
--- a/Components/stack/zdo/ZDApp.c
+++ b/Components/stack/zdo/ZDApp.c
@@ -3463,7 +3463,7 @@ void ZDApp_NVUpdate( void )
*/
uint16 ZDApp_CoordStartPANIDConflictCB( uint16 panid )
{
- return ( panid + 1 );
+ return ( panid );
}
/*********************************************************************
diff --git a/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c b/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
index 7c6c77e..69daba2 100644
--- a/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
+++ b/Projects/zstack/ZMain/TI2530ZNP/OnBoard.c
@@ -24,7 +24,7 @@
its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
- PROVIDED <20>AS IS<49> WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
+ PROVIDED <20>AS IS<49> WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
@@ -144,8 +144,17 @@ void InitBoard( uint8 level )
#if defined CC2531ZNP
znpCfg1 = ZNP_CFG1_UART;
+#elif defined FIRMWARE_CC2530_CC2591 || defined(FIRMWARE_CC2530_CC2592)
+ znpCfg1 = ZNP_CFG1_UART;
+ znpCfg0 = ZNP_CFG0_32K_OSC;
#elif defined CC2530_MK
+
+ #if defined FIRMWARE_CC2530
+ znpCfg1 = ZNP_CFG1_UART;
+ #else
znpCfg1 = ZNP_CFG1_SPI;
+ #endif
+
znpCfg0 = ZNP_CFG0_32K_OSC;
#else
znpCfg1 = P2_0;
diff --git a/Projects/zstack/ZNP/CC253x/Source/preinclude.h b/Projects/zstack/ZNP/CC253x/Source/preinclude.h
new file mode 100644
index 0000000..1b96d90
--- /dev/null
+++ b/Projects/zstack/ZNP/CC253x/Source/preinclude.h
@@ -0,0 +1,93 @@
+// Shared accross all firmwares
+#define ASSERT_RESET
+
+#if defined FIRMWARE_SBL
+ #define MAKE_CRC_SHDW
+#else
+ #define FAKE_CRC_SHDW
+#endif
+
+#define TC_LINKKEY_JOIN
+#define SECURE 1
+#define INCLUDE_REVISION_INFORMATION
+
+// Increase NWK_LINK_STATUS_PERIOD to reduce amount of messages on the network
+#define NWK_LINK_STATUS_PERIOD 60
+
+// Save memory
+#undef APS_MAX_GROUPS
+#define APS_MAX_GROUPS 1
+#undef NWK_MAX_BINDING_ENTRIES
+#define NWK_MAX_BINDING_ENTRIES 1
+
+/**
+ * Disabling MULTICAST is required in order for proper group support.
+ * If MULTICAST is not disabled, the group adress is not included in the APS header
+ */
+#define MULTICAST_ENABLED FALSE
+
+/**
+ * Reduce BCAST_DELIVERY_TIME and increase MAX_BCAST time.
+ * BCAST_DELIVERY_TIME is the length of time a broadcast message is kept in the broadcast table
+ * MAX_BCAST is the max number of messages that are in the broadcast table
+ * If e.g. BCAST_DELIVERY_TIME = 1 second and MAX_BCAST = 10; 10 broadcast messages per second can be send.
+ *
+ * Zigbee2mqtt has a fixed delay of 170ms between each command.
+ * Therefore a BCAST_DELIVERY_TIME = 20 (= 2 seconds) and MAX_BCAST = 12 allows us to send
+ * 2 / 12 = 1 group command per 166ms, which is just below the zigbee2mqtt delay.
+ * Therefore the broadcast table will never get full.
+ */
+#define BCAST_DELIVERY_TIME 20
+#undef MAX_BCAST // avoids incompatible redefinition of macro warning
+#define MAX_BCAST 12
+
+// See swra635.pdf
+#define HAL_LCD FALSE
+#define HAL_ADC FALSE
+
+/**
+ * Enable MTO routing, but disable source routing.
+ * https://github.com/Koenkk/zigbee2mqtt/issues/1408
+ */
+#define CONCENTRATOR_ENABLE TRUE
+#define CONCENTRATOR_ROUTE_CACHE FALSE
+#define CONCENTRATOR_DISCOVERY_TIME 120
+#define MAX_RTG_SRC_ENTRIES 1 // Source table is not used, reduce to minimal size
+#undef MAX_RTG_ENTRIES
+#define MAX_RTG_ENTRIES 60
+#define MAX_NEIGHBOR_ENTRIES 8
+
+// CC2531
+#if defined FIRMWARE_CC2531
+ #define CC2531ZNP
+ #define NWK_MAX_DEVICE_LIST 25
+ #define MAXMEMHEAP 3235
+
+// CC2530
+#elif defined FIRMWARE_CC2530
+ #define HAL_UART_DMA_RX_MAX 128
+ #define ENABLE_MT_SYS_RESET_SHUTDOWN
+ #define ZTOOL_P1
+ #define CC2530_MK
+ #define NWK_MAX_DEVICE_LIST 21
+ #define MAXMEMHEAP 3227
+
+// CC2530 + CC2591
+#elif defined FIRMWARE_CC2530_CC2591
+ #define ENABLE_MT_SYS_RESET_SHUTDOWN
+ #define ZTOOL_P1
+ #define HAL_UART_DMA_RX_MAX 128
+ #define HAL_PA_LNA
+ #define NWK_MAX_DEVICE_LIST 21
+ #define MAXMEMHEAP 3225
+
+// CC2530 + CC2592
+#elif defined FIRMWARE_CC2530_CC2591
+ #define ENABLE_MT_SYS_RESET_SHUTDOWN
+ #define ZTOOL_P1
+ #define HAL_UART_DMA_RX_MAX 128
+ #define HAL_PA_LNA_CC2592
+ #define NWK_MAX_DEVICE_LIST 21
+ #define MAXMEMHEAP 3225
+
+#endif
\ No newline at end of file
diff --git a/Projects/zstack/ZNP/Source/znp.cfg b/Projects/zstack/ZNP/Source/znp.cfg
index 7e524a9..6326400 100644
--- a/Projects/zstack/ZNP/Source/znp.cfg
+++ b/Projects/zstack/ZNP/Source/znp.cfg
@@ -101,4 +101,6 @@
-DMT_ZDO_EXTENSIONS
/* MT_APP interface - useful when ZAP defines ZAP_ZNP_MT for MT_SYS_APP_MSG pass-through. */
--DMT_APP_FUNC
\ No newline at end of file
+-DMT_APP_FUNC
+
+--preinclude=preinclude.h
\ No newline at end of file
diff --git a/Projects/zstack/ZNP/Source/znp_app.c b/Projects/zstack/ZNP/Source/znp_app.c
index 470ff12..e42ac65 100644
--- a/Projects/zstack/ZNP/Source/znp_app.c
+++ b/Projects/zstack/ZNP/Source/znp_app.c
@@ -390,12 +390,23 @@ static void npInit(void)
halUARTCfg_t uartConfig;
uartConfig.configured = TRUE;
+
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
+ uartConfig.baudRate = HAL_UART_BR_115200;
+#else
uartConfig.baudRate = ZNP_UART_BAUD;
-#ifdef ZNP_ALT
+#endif
+
+#if defined(FIRMWARE_CC2530) || defined(FIRMWARE_CC2530_CC2591) || defined(FIRMWARE_CC2530_CC2592)
uartConfig.flowControl = FALSE;
#else
+ #ifdef ZNP_ALT
+ uartConfig.flowControl = FALSE;
+ #else
uartConfig.flowControl = TRUE;
+ #endif
#endif
+
uartConfig.flowControlThreshold = HAL_UART_FLOW_THRESHOLD;
uartConfig.rx.maxBufSize = HAL_UART_RX_BUF_SIZE;
uartConfig.tx.maxBufSize = HAL_UART_TX_BUF_SIZE;
@@ -404,6 +415,15 @@ static void npInit(void)
uartConfig.callBackFunc = npUartCback;
HalUARTOpen(HAL_UART_PORT, &uartConfig);
MT_UartRegisterTaskID(znpTaskId);
+
+#if defined FIRMWARE_CC2530_CC2591 || defined(FIRMWARE_CC2530_CC2592)
+ //Add TX Setting
+ #if defined HAL_PA_LNA || defined HAL_PA_LNA_CC2592
+ ZMacSetTransmitPower(TX_PWR_PLUS_19);
+ #else
+ ZMacSetTransmitPower(TX_PWR_PLUS_4);
+ #endif
+#endif
}
else
{
Reference in New Issue View Git Blame Copy Permalink