esphome-docs/components/sensor/ezo.rst

193 lines
5.5 KiB
ReStructuredText
Raw Normal View History

EZO sensor circuits
===================
.. seo::
:description: Instructions for setting up EZO sensor circuits in esphome
:image: ezo-ph-circuit.png
:keywords: ezo ph ec rtd sensor circuit esphome
The ``ezo`` sensor platform allows you to use your EZO sensor circuits with
ESPHome. The :ref:`I²C Bus <i2c>` is
required to be set up in your configuration for this sensor to work.
All embedded solutions from EZO can be found `here <https://atlas-scientific.com/embedded-solutions/>`__.
If a certain command is not supported directly, it can be executed with the ``send_custom()`` method call.
.. figure:: images/ezo-ph-circuit.png
:align: center
:width: 80.0%
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: ezo
id: ph_ezo
address: 99
unit_of_measurement: "pH"
update_interval: 10s
- platform: ezo
id: rtd_ezo
name: "RTD Temperature"
address: 102
accuracy_decimals: 2
unit_of_measurement: "°C"
update_interval: 10s
Configuration variables:
------------------------
- **address** (**Required**, int): Specify the I²C address of the sensor.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
sensor. Defaults to ``60s``.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- All other options from :ref:`Sensor <config-sensor>`.
.. _evo_callbacks:
Callbacks
---------
- **on_led:** : Triggered when the result of ``get_led_state()`` is ready. The LED state is provided as a boolean variable named ``x``.
- **on_device_information:** : Triggered when the result of ``get_device_information()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
- **on_slope:** : Triggered when the result of ``get_slope()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
- **on_calibration:** : Triggered when the result of ``get_calibration()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
- **on_t:** : Triggered when the result of ``get_t()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
- **on_custom:** : Triggered when the result of ``get_custom()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
.. _evo_lambda_calls:
lambda calls
------------
From :ref:`lambdas <config-lambda>`, you can interact with the sensor in various ways. For any ``get`` command a trigger will be called with the information retrieved from the sensor. See :ref:`evo_callbacks`. For more information on the command specifics, refer to the datasheet.
- ``set_i2c(uint8_t address)``: Set I2C address of the device, must be an integer between 1 and 127
.. code-block:: cpp
id(ph_ezo).set_i2c(100);
- ``get_device_information()``: Sensor retrieves calibration and triggers ``on_device_information:`` once done
.. code-block:: cpp
id(ph_ezo).get_device_information();
- ``set_sleep()``: Put the device to sleep
.. code-block:: cpp
id(ph_ezo).set_sleep();
- ``get_state()``: Performs a read on the current sensor.
.. code-block:: cpp
id(ph_ezo).get_state();
- ``get_slope()``: Sensor retrieves slope and triggers ``on_slope:`` once done
.. code-block:: cpp
id(ph_ezo).get_slope();
- ``get_t()``: Sensor retrieves temperature compensation value (in Celcius) and triggers ``on_t:`` once done
.. code-block:: cpp
id(ph_ezo).get_t();
- ``set_t(float value)``: Send the given temperature (in Celcius) to the sensor.
.. code-block:: cpp
id(ph_ezo).set_t("27.00");
- ``set_tempcomp_value(float temp)``: Send the given temperature (in Celcius) to the sensor (this is an alias of `set_t()` for backwards compatibility)
.. code-block:: cpp
id(ph_ezo).set_tempcomp_value(id(rtd_ezo).state);
- ``get_calibration()``: Sensor retrieves calibration and triggers ``on_calibration:`` once done
.. code-block:: cpp
id(ph_ezo).get_calibration();
- ``set_calibration_generic(float value)``: Sets the calibration with no point.
.. code-block:: cpp
id(ph_ezo).set_calibration_generic(750.0);
- ``set_calibration_point_low(float value)``: Sets the low calibration point.
.. code-block:: cpp
id(ph_ezo).set_calibration_point_low(4.00);
- ``set_calibration_point_mid(float value)``: Sets the medium calibration point.
.. code-block:: cpp
id(ph_ezo).set_calibration_point_mid(7.00);
- ``set_calibration_point_high(float value)``: Sets the high calibration point.
.. code-block:: cpp
id(ph_ezo).set_calibration_point_low(10.00);
- ``clear_calibration()``: Clears all calibration points.
.. code-block:: cpp
id(ph_ezo).clear_calibration();
- ``get_led_state()``: Sensor LED state and triggers ``on_led:`` once done
.. code-block:: cpp
id(ph_ezo).get_led_state();
- ``set_led_state(bool on)``: Sensor LED on or off
.. code-block:: cpp
id(ph_ezo).set_led_state(true);
- ``send_custom(const std::string &payload, uint16_t delay_ms = 300, bool response_expected = false)``: Runs a custom command. This sends exactly what is in ``payload``. Optionally you can set a ``delay`` and if a response is expected that should be parsed. Defaults to ``false`` for custom commands. Triggers ``on_custom:`` if there's a response.
.. code-block:: cpp
// Run a custom command to turn on the LED
id(ph_ezo).send_custom("L,1");
See Also
--------
- :ref:`sensor-filters`
- :apiref:`ezo/ezo.h`
- :ghedit:`Edit`