esphome-docs/esphomeyaml/devices/esp32.rst

52 lines
1.7 KiB
ReStructuredText
Raw Normal View History

2018-06-01 18:10:00 +02:00
Generic ESP32
=============
2018-06-02 16:03:48 +02:00
All ESP32-based devices are supported by esphomeyaml. Simply select ``ESP32`` when
2018-06-01 18:10:00 +02:00
the esphomeyaml wizard asks you for your platform and choose a board type
from `this link <http://docs.platformio.org/en/latest/platforms/espressif32.html>`__ when the wizard
asks you for the board type.
.. code:: yaml
# Example configuration entry
esphomeyaml:
name: livingroom
platform: ESP32
board: <BOARD_TYPE>
2018-06-01 18:10:00 +02:00
The ESP32 boards often use the internal GPIO pin numbering on the board, this means that
you don't have to worry about other kinds of pin numberings, yay!
Some notes about the pins on the ESP32:
- ``GPIO0`` is used to determine the boot mode on startup. It should therefore not be pulled LOW
on startup to avoid booting into flash mode. You can, however, still use this as an output pin.
- ``GPIO34``-``GPIO39`` can not be used as outputs (even though GPIO stands for "general purpose input
**output**"...)
- ``GPIO32``-``GPIO39``: These pins can be used with the :doc:`/esphomeyaml/components/sensor/adc` to measure
voltages.
- ``GPIO2``: This pin is connected to the blue LED on the board as seen in above picture. It also supports
the :doc:`touch pad binary sensor </esphomeyaml/components/binary_sensor/esp32_touch>` like some other
pins.
.. code:: yaml
# Example configuration entry
esphomeyaml:
name: livingroom
platform: ESP32
board: <BOARD_TYPE>
binary_sensor:
- platform: gpio
name: "Pin GPIO23"
pin: GPIO23
See Also
2018-08-24 22:44:01 +02:00
--------
2018-06-01 18:10:00 +02:00
- :doc:`nodemcu_esp32`
2018-06-04 08:17:22 +02:00
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/devices/esp32.rst>`__
2018-10-12 16:33:22 +02:00
.. disqus::