esphome-docs/components/esp32.rst

136 lines
5.9 KiB
ReStructuredText
Raw Normal View History

ESP32 Platform
==============
.. seo::
:description: Configuration for the ESP32 platform for ESPHome.
:image: esp32.svg
This component contains platform-specific options for the ESP32 platform.
.. code-block:: yaml
# Example configuration entry
esp32:
board: nodemcu-32s
Configuration variables:
------------------------
- **board** (**Required**, string): The PlatformIO board ID that should
be used. Choose the appropriate board from
`this list <https://registry.platformio.org/platforms/platformio/espressif32/boards?version=5.3.0>`__ (the icon next to the name
2022-01-10 14:51:27 +01:00
can be used to copy the board ID). *This only affects pin aliases, flash size and some internal settings*, if unsure
choose a generic board from Espressif such as ``esp32dev``.
- **framework** (*Optional*): Options for the underlying framework used by ESPHome.
See :ref:`esp32-arduino_framework` and :ref:`esp32-espidf_framework`.
- **flash_size** (*Optional*, string): The amount of flash memory available on the ESP32 board/module. One of ``2MB``,
``4MB``, ``8MB``, ``16MB`` or ``32MB``. Defaults to ``4MB``. **Warning: specifying a size larger than that available
on your board will cause the ESP32 to fail to boot.**
- **partitions** (*Optional*, filename): The name of (optionally including the path to) the file containing the
partitioning scheme to be used. When not specified, partitions are automatically generated based on ``flash_size``.
- **variant** (*Optional*, string): The variant of the ESP32 that is used on this board. One of ``esp32``,
``esp32s2``, ``esp32s3``, ``esp32c3`` and ``esp32h2``. Defaults to the variant that is detected from the board; if
2022-01-10 14:51:27 +01:00
a board that's unknown to ESPHome is used, this option is mandatory.
GPIO Pin Numbering
------------------
The ESP32 boards often use the internal GPIO pin numbering on the board, this means that
you don't have to worry about other kinds of pin numberings, yay!
Some notes about the pins on the ESP32:
- ``GPIO0`` is used to determine the boot mode on startup. It should therefore not be pulled LOW
on startup to avoid booting into flash mode. You can, however, still use this as an output pin.
- ``GPIO34``-``GPIO39`` can not be used as outputs (even though GPIO stands for "general purpose input
**output**"...).
- ``GPIO32``-``GPIO39``: These pins can be used with the :doc:`/components/sensor/adc` to measure
voltages.
- ``GPIO2``: This pin is connected to the blue LED on the board. It also supports
the :doc:`touch pad binary sensor </components/binary_sensor/esp32_touch>` like some other
pins.
.. code-block:: yaml
# Example configuration entry
binary_sensor:
- platform: gpio
name: "Pin GPIO23"
pin: GPIO23
.. _esp32-arduino_framework:
Arduino framework
-----------------
This is the default framework for ESP32 chips at the moment.
.. code-block:: yaml
# Example configuration entry
esp32:
board: nodemcu-32s
framework:
type: arduino
version: 2.0.0
2022-04-03 09:30:25 +02:00
Configuration variables:
------------------------
- **version** (*Optional*, string): The base framework version number to use, from
`ESP32 arduino releases <https://github.com/espressif/arduino-esp32/releases>`__. Defaults to ``recommended``. Additional values are:
- ``dev``: Use the latest commit from https://github.com/espressif/arduino-esp32, note this may break at any time
- ``latest``: Use the latest *release* from https://github.com/espressif/arduino-esp32/releases, even if it hasn't been recommended yet.
- ``recommended``: Use the recommended framework version.
- **source** (*Optional*, string): The PlatformIO package or repository to use for framework. This can be used to use a custom or patched version of the framework.
- **platform_version** (*Optional*, string): The version of the `platformio/espressif32 <https://github.com/platformio/platform-espressif32/releases/>`__ package to use.
.. _esp32-espidf_framework:
ESP-IDF framework
-----------------
This is an alternative base framework for ESP32 chips, and recommended for variants
of the ESP32 like ESP32S2, ESP32S3, ESP32C3 and single-core ESP32 chips.
.. code-block:: yaml
# Example configuration entry
esp32:
board: esp32-c3-devkitm-1
framework:
type: esp-idf
version: recommended
# Custom sdkconfig options
sdkconfig_options:
COMPILER_OPTIMIZATION_SIZE: y
# Advanced tweaking options
advanced:
ignore_efuse_mac_crc: false
2022-04-03 09:30:25 +02:00
Configuration variables:
------------------------
- **version** (*Optional*, string): The base framework version number to use, from
`ESP32 ESP-IDF releases <https://github.com/espressif/esp-idf/releases>`__. Defaults to ``recommended``. Additional values are:
- ``dev``: Use the latest commit from https://github.com/espressif/esp-idf, note this may break at any time
- ``latest``: Use the latest *release* from https://github.com/espressif/esp-idf/releases, even if it hasn't been recommended yet.
- ``recommended``: Use the recommended framework version.
- **source** (*Optional*, string): The PlatformIO package or repository to use for the framework. This can be used to use a custom or patched version of the framework.
- **platform_version** (*Optional*, string): The version of the `platformio/espressif32 <https://github.com/platformio/platform-espressif32/releases/>`__ package to use.
- **sdkconfig_options** (*Optional*, mapping): Custom sdkconfig `compiler options <https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/kconfig.html#compiler-options>`__ to set in the ESP-IDF project.
- **advanced** (*Optional*, mapping): Advanced options for highly specific tweaks.
- **ignore_efuse_mac_crc** (*Optional*, boolean): Can be set to ``true`` for devices on which the burnt in MAC address does not
match the also burnt in CRC for that MAC address, resulting in an error like ``Base MAC address from BLK0 of EFUSE CRC error``.
See Also
--------
- :doc:`esphome`
- :ghedit:`Edit`