esphome-docs/components/tuya.rst

146 lines
5.6 KiB
ReStructuredText
Raw Normal View History

Tuya MCU
========
.. seo::
:description: Instructions for setting up the Tuya component.
:image: tuya.png
The ``tuya`` component creates a serial connection to the Tuya MCU for platforms to use.
.. figure:: /images/tuya.png
:align: center
:width: 40%
The ``tuya`` serial component requires a :ref:`UART bus <uart>` to be configured.
Put the ``tuya`` component in the config and it will list the possible devices for you in the config log.
.. code-block:: yaml
# Register the Tuya MCU connection
tuya:
Here is an example output for a Tuya fan controller:
.. code-block:: text
[12:39:45][C][tuya:023]: Tuya:
[12:39:45][C][tuya:032]: Datapoint 1: switch (value: ON)
[12:39:45][C][tuya:036]: Datapoint 3: enum (value: 1)
[12:39:45][C][tuya:036]: Datapoint 6: enum (value: 0)
[12:39:45][C][tuya:034]: Datapoint 7: int value (value: 0)
[12:39:45][C][tuya:032]: Datapoint 9: switch (value: OFF)
[12:39:45][C][tuya:046]: Product: '{"p":"hqq73kftvzh8c92u","v":"1.0.0","m":0}'
2022-05-15 21:44:18 +02:00
Here is another example output for a Tuya ME-81H thermostat:
.. code-block:: text
[08:51:09][C][tuya:032]: Tuya:
[08:51:09][C][tuya:043]: Datapoint 1: switch (value: ON)
[08:51:09][C][tuya:045]: Datapoint 24: int value (value: 220)
[08:51:09][C][tuya:045]: Datapoint 16: int value (value: 22)
[08:51:09][C][tuya:049]: Datapoint 2: enum (value: 1)
[08:51:09][C][tuya:045]: Datapoint 19: int value (value: 40)
[08:51:09][C][tuya:045]: Datapoint 101: int value (value: 1)
[08:51:09][C][tuya:045]: Datapoint 27: int value (value: -2)
[08:51:09][C][tuya:049]: Datapoint 43: enum (value: 1)
[08:51:09][C][tuya:049]: Datapoint 102: enum (value: 1)
[08:51:09][C][tuya:051]: Datapoint 45: bitmask (value: 0)
[08:51:09][C][tuya:043]: Datapoint 10: switch (value: ON)
[08:51:09][C][tuya:041]: Datapoint 38: raw (value: 06.00.14.08.00.0F.0B.1E.0F.0C.1E.0F.11.00.16.16.00.0F.08.00.16.17.00.0F (24))
[08:51:09][C][tuya:049]: Datapoint 36: enum (value: 1)
[08:51:09][C][tuya:057]: GPIO Configuration: status: pin 14, reset: pin 0 (not supported)
[08:51:09][C][tuya:061]: Status Pin: GPIO14
[08:51:09][C][tuya:063]: Product: '{"p":"gogb05wrtredz3bs","v":"1.0.0","m":0}'
Configuration variables:
------------------------
2022-02-10 23:10:43 +01:00
- **time_id** (*Optional*, :ref:`config-id`): Some Tuya devices support obtaining local time from ESPHome.
Specify the ID of the :doc:`time/index` which will be used.
2022-05-15 21:44:18 +02:00
- **status_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): Some Tuya devices support WiFi status reporting ONLY through gpio pin.
Specify the pin reported in the config dump or leave empty otherwise.
More about this `here <https://developer.tuya.com/en/docs/iot/tuya-cloud-universal-serial-port-access-protocol?id=K9hhi0xxtn9cb#title-6-Query%20working%20mode>`__.
- **ignore_mcu_update_on_datapoints** (*Optional*, list): A list of datapoints to ignore MCU updates for. Useful for certain broken/erratic hardware and debugging.
Automations:
2022-04-03 09:30:25 +02:00
- **on_datapoint_update** (*Optional*): An automation to perform when a Tuya datapoint update is received. See :ref:`tuya-on_datapoint_update`.
Tuya Automation
---------------
.. _tuya-on_datapoint_update:
``on_datapoint_update``
***********************
2022-02-10 23:10:43 +01:00
This automation will be triggered when a a Tuya datapoint update is received.
A variable ``x`` is passed to the automation for use in lambdas.
The type of ``x`` variable is depending on ``datapoint_type`` configuration variable:
- *raw*: ``x`` is ``std::vector<uint8_t>``
- *string*: ``x`` is ``std::string``
- *bool*: ``x`` is ``bool``
- *int*: ``x`` is ``int``
- *uint*: ``x`` is ``uint32_t``
- *enum*: ``x`` is ``uint8_t``
- *bitmask*: ``x`` is ``uint32_t``
- *any*: ``x`` is :apistruct:`tuya::TuyaDatapoint`
.. code-block:: yaml
tuya:
on_datapoint_update:
- sensor_datapoint: 6
datapoint_type: raw
then:
- lambda: |-
2022-10-25 01:06:07 +02:00
ESP_LOGD("main", "on_datapoint_update %s", format_hex_pretty(x).c_str());
id(voltage).publish_state((x[0] << 8 | x[1]) * 0.1);
id(current).publish_state((x[3] << 8 | x[4]) * 0.001);
id(power).publish_state((x[6] << 8 | x[7]) * 0.1);
- sensor_datapoint: 7 # sample dp
datapoint_type: string
then:
- lambda: |-
ESP_LOGD("main", "on_datapoint_update %s", x.c_str());
- sensor_datapoint: 8 # sample dp
datapoint_type: bool
then:
- lambda: |-
2022-02-10 23:10:43 +01:00
ESP_LOGD("main", "on_datapoint_update %s", ONOFF(x));
- sensor_datapoint: 6
datapoint_type: any # this is optional
then:
- lambda: |-
if (x.type == tuya::TuyaDatapointType::RAW) {
2022-10-25 01:06:07 +02:00
ESP_LOGD("main", "on_datapoint_update %s", format_hex_pretty(x.value_raw).c_str());
} else {
ESP_LOGD("main", "on_datapoint_update %hhu", x.type);
}
Configuration variables:
2022-04-03 09:30:25 +02:00
- **sensor_datapoint** (**Required**, int): The datapoint id number of the sensor.
- **datapoint_type** (**Required**, string): The datapoint type one of *raw*, *string*, *bool*, *int*, *uint*, *enum*, *bitmask* or *any*.
- See :ref:`Automation <automation>`.
See Also
--------
- :doc:`/components/fan/tuya`
- :doc:`/components/light/tuya`
- :doc:`/components/switch/tuya`
- :doc:`/components/climate/tuya`
- :doc:`/components/binary_sensor/tuya`
- :doc:`/components/sensor/tuya`
- :doc:`/components/text_sensor/tuya`
- :doc:`/components/number/tuya`
- :apiref:`tuya/tuya.h`
- :ghedit:`Edit`