esphome-docs/guides/contributing.rst

657 lines
24 KiB
ReStructuredText
Raw Normal View History

2018-06-01 18:10:00 +02:00
Contributing
============
2018-11-14 22:12:27 +01:00
.. seo::
2019-02-16 23:25:23 +01:00
:description: Getting started guide for contributing to the ESPHome project
:image: github-circle.svg
2018-11-14 22:12:27 +01:00
2019-02-16 23:25:23 +01:00
Contributions to the ESPHome suite are very welcome! All the code for the projects
2018-06-01 18:10:00 +02:00
is hosted on GitHub and you can find the sources here:
2019-05-14 11:40:48 +02:00
- `ESPHome <https://github.com/esphome/esphome>`__ (Project Source Code)
- `ESPHome-Docs <https://github.com/esphome/esphome-docs>`__ (The documentation which you're reading here)
2018-06-01 18:10:00 +02:00
2018-10-20 15:10:26 +02:00
Just clone the repository locally, do the changes for your new feature/bug fix and submit
2019-05-12 22:44:59 +02:00
a pull request.
2018-06-01 18:10:00 +02:00
2019-02-11 18:20:49 +01:00
Contributing to ESPHome-Docs
----------------------------
.. figure:: /images/logo-docs.svg
:align: center
:width: 60.0%
2018-06-01 18:10:00 +02:00
2019-02-16 23:25:23 +01:00
One of the areas of ESPHome that can always be improved is the documentation.
2019-08-27 19:44:03 +02:00
If you see an issue somewhere, a spelling mistakes or if you want to share your awesome
2018-06-01 18:10:00 +02:00
setup, please feel free to submit a pull request.
2019-02-16 23:25:23 +01:00
The ESPHome documentation is built using `sphinx <http://www.sphinx-doc.org/>`__ and uses
2018-06-01 18:10:00 +02:00
`reStructuredText <http://docutils.sourceforge.net/rst.html>`__ for all source files.
Syntax
******
Here's a quick RST primer:
2021-07-22 23:38:38 +02:00
Title hierarchy is based on order of occurrence, not on type of character used to underline it. This
documents establish the following character order for better consistency.
2018-06-01 18:10:00 +02:00
- **Headers**: You can write titles like this:
.. code-block:: rst
2018-06-01 18:10:00 +02:00
My Title
========
2018-10-12 16:33:22 +02:00
and section headers like this:
2018-06-01 18:10:00 +02:00
.. code-block:: rst
2018-06-01 18:10:00 +02:00
2018-10-12 16:33:22 +02:00
My Sub Section
--------------
and sub-section headers like this:
.. code-block:: rst
2018-10-12 16:33:22 +02:00
2019-02-27 10:23:58 +01:00
My Sub-sub Section
2018-10-12 16:33:22 +02:00
******************
2018-06-01 18:10:00 +02:00
2019-02-27 10:23:58 +01:00
.. note::
The length of the bar below the text **must** match the title Text length.
Also, titles should be in Title Case
2018-06-01 18:10:00 +02:00
- **Links**: To create a link to an external resource (for example https://www.google.com), use
``\`Link text <link_url>\`__``. For example:
.. code-block:: rst
2018-06-01 18:10:00 +02:00
`Google.com <https://www.google.com>`__
`Google.com <https://www.google.com>`__
- **References**: To reference another document, use the ``:doc:`` and ``:ref:`` roles (references
are set up globally and can be used between documents):
.. code-block:: rst
2018-06-01 18:10:00 +02:00
.. _my-reference-label:
Section to cross-reference
2019-05-13 21:51:04 +02:00
--------------------------
2018-06-01 18:10:00 +02:00
See :ref:`my-reference-label`, also see :doc:`/components/switch/gpio`.
:doc:`Using custom text </components/switch/gpio>`.
2018-06-01 18:10:00 +02:00
See :ref:`devices`, also see :doc:`/components/switch/gpio`.
:doc:`Using custom text </components/switch/gpio>`.
2018-06-01 18:10:00 +02:00
- **Inline code**: To have text appear ``like this``, use double backticks:
.. code-block:: rst
2018-06-01 18:10:00 +02:00
To have text appear ``like this``, use double backticks.
To have text appear ``like this``, use double backticks.
- **Code blocks**: To show a sample configuration file, use the ``code-block`` directive:
2018-06-01 18:10:00 +02:00
.. code-block:: rst
2018-06-01 18:10:00 +02:00
.. code-block:: yaml
2018-06-01 18:10:00 +02:00
# Sample configuration entry
switch:
- platform: gpio
name: "Relay #42"
pin: GPIO13
.. code-block:: yaml
2018-06-01 18:10:00 +02:00
2019-02-27 18:32:47 +01:00
# Sample configuration entry
switch:
- platform: gpio
name: "Relay #42"
pin: GPIO13
2018-06-01 18:10:00 +02:00
2019-02-15 09:30:38 +01:00
.. note::
Please note the empty line after the ``code-block`` directive. That is necessary.
2018-06-01 18:10:00 +02:00
- **Images**: To show images, use the ``figure`` directive:
.. code-block:: rst
2018-06-01 18:10:00 +02:00
.. figure:: images/dashboard_states.png
2018-06-01 18:10:00 +02:00
:align: center
:width: 40.0%
Optional figure caption.
.. figure:: images/dashboard_states.png
2019-02-27 18:32:47 +01:00
:align: center
:width: 40.0%
2018-06-01 18:10:00 +02:00
2019-02-27 18:32:47 +01:00
Optional figure caption.
2018-06-01 18:10:00 +02:00
2019-02-15 09:30:38 +01:00
.. note::
All images in the documentation need to be as small as possible to ensure
fast page load times. For normal figures the maximum size should be at most
2019-08-27 19:44:03 +02:00
about 1000x800 px or so. Additionally, please use online tools like
2019-02-15 09:30:38 +01:00
https://tinypng.com/ or https://tinyjpg.com/ to further compress images.
2018-06-01 18:10:00 +02:00
- **Notes and warnings**: You can create simple notes and warnings using the ``note`` and ``warning``
directives:
.. code-block:: rst
2018-06-01 18:10:00 +02:00
.. note::
2019-02-27 18:32:47 +01:00
This is a note.
2018-06-01 18:10:00 +02:00
.. warning::
2019-02-27 18:32:47 +01:00
This is a warning.
2018-06-01 18:10:00 +02:00
.. note::
2019-02-27 18:32:47 +01:00
This is a note.
2018-06-01 18:10:00 +02:00
.. warning::
2019-02-27 18:32:47 +01:00
This is a warning.
2018-06-01 18:10:00 +02:00
- **Italic and boldface font families**: To *italicize* text, use one asterisk around the text. To put
**a strong emphasis** on a piece of text, put two asterisks around it.
.. code-block:: rst
2018-06-01 18:10:00 +02:00
*This is italicized.* (A weird word...)
**This is very important.**
*This is italicized.* (A weird word...)
**This is very important.**
2019-08-27 19:44:03 +02:00
- **Ordered and unordered list**: The syntax for lists in RST is more or less the same as in Markdown:
2018-06-01 18:10:00 +02:00
.. code-block:: rst
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
- Unordered item
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
- Unordered sub-item
2018-06-01 18:10:00 +02:00
- Item with a very long text so that it does not fully fit in a single line and
must be split up into multiple lines.
2019-08-27 19:44:03 +02:00
1. Ordered item #1
2. Ordered item #2
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
- Unordered item
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
- Unordered sub-item
2018-06-01 18:10:00 +02:00
- Item with a very long text so that it does not fully fit in a single line and
must be split up into multiple lines.
2019-08-27 19:44:03 +02:00
1. Ordered item #1
2. Ordered item #2
2018-06-01 18:10:00 +02:00
2019-02-27 18:32:47 +01:00
- **imgtable**: ESPHome uses a custom RST directive to show the table on the front page (see
`index.rst <https://github.com/esphome/esphome-docs/blob/current/index.rst>`__).
2019-02-15 09:30:38 +01:00
New pages need to be added to the ``imgtable`` list. The syntax is CSV with <PAGE NAME>, <FILE NAME> (without RST),
<IMAGE> (in top-level images/ directory), <COMMENT> (optional - short text to describe the component). The aspect ratio of these images should be 8:10 (or 10:8) but exceptions are possible.
2019-02-15 09:30:38 +01:00
2019-10-21 20:35:56 +02:00
Because these images are served on the main page, they need to be compressed heavily. SVGs are preferred over JPGs
2019-02-15 09:30:38 +01:00
and JPGs should be max. 300x300px.
If you have imagemagick installed, you can use this command to convert the thumbnail:
.. code-block:: bash
convert -sampling-factor 4:2:0 -strip -interlace Plane -quality 80% -resize 300x300 in.jpg out.jpg
2018-06-01 18:10:00 +02:00
reStructured text can do a lot more than this, so if you're looking for a more complete guide
please have a look at the `Sphinx reStructuredText Primer <http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html>`__.
Build
*****
2019-02-27 18:32:47 +01:00
2018-10-12 16:33:22 +02:00
.. note::
2019-08-27 19:44:03 +02:00
The easiest way is to use the `esphome-docs Docker image <https://hub.docker.com/r/esphome/esphome-docs/>`__:
.. code-block:: bash
2018-10-12 16:33:22 +02:00
docker run --rm -v "${PWD}/":/data/esphomedocs -p 8000:8000 -it esphome/esphome-docs
2021-01-11 17:46:37 +01:00
With ``PWD`` referring to the root of the ``esphome-docs`` git repository. Then go to ``<CONTAINER_IP>:8000`` in your browser.
2018-06-01 18:10:00 +02:00
This way, you don't have to install the dependencies to build the documentation.
2019-08-27 19:44:03 +02:00
To check your documentation changes locally, you first need install Sphinx (with **Python 3**).
.. code-block:: bash
# in ESPHome-Docs repo:
2019-10-19 22:16:09 +02:00
pip install -r requirements.txt
2018-06-03 12:50:44 +02:00
Then, use the provided Makefile to build the changes and start a simple web server:
2018-06-03 11:37:08 +02:00
.. code-block:: bash
2018-06-03 11:37:08 +02:00
2018-06-03 12:50:44 +02:00
# Start web server on port 8000
make webserver
# Updates then happen via:
2018-06-03 11:37:08 +02:00
make html
Notes
*****
2018-06-01 18:10:00 +02:00
Some notes about the docs:
2020-05-10 21:27:59 +02:00
- Use the English language (duh...)
2019-05-12 22:44:59 +02:00
- An image tells a thousand words, please use them wherever possible. But also don't forget to shrink them, for example
2018-06-03 12:50:44 +02:00
I often use https://tinypng.com/
2019-05-12 22:44:59 +02:00
- Try to use examples as often as possible (also while it's great to use highly accurate,
2018-06-01 18:10:00 +02:00
and domain-specific lingo, it should not interfere with new users understanding the content)
2019-05-12 22:44:59 +02:00
- Fixes/improvements for the docs themselves should go to the ``current`` branch of the
2018-06-04 08:17:22 +02:00
esphomedocs repository. New features should be added against the ``next`` branch.
2019-05-12 22:44:59 +02:00
- Always create new branches in your fork for each pull request.
2018-06-01 18:10:00 +02:00
2019-05-13 21:51:04 +02:00
.. _setup_dev_env:
2019-02-21 17:44:17 +01:00
Setting Up Development Environment
----------------------------------
For developing new features to ESPHome, you will first need to set up a development environment.
This is only possible for ``pip`` installs.
.. code-block:: bash
# Clone repos
git clone https://github.com/esphome/esphome.git
git clone https://github.com/esphome/esphome-docs.git
2020-05-10 21:27:59 +02:00
# Install ESPHome
2019-02-21 17:44:17 +01:00
cd esphome/
2019-05-12 22:44:59 +02:00
script/setup
2019-02-21 17:44:17 +01:00
# Start a new feature branch
git checkout -b my-new-feature
cd ..
2020-05-10 21:27:59 +02:00
Now you can open ESPHome in your IDE of choice (mine is CLion) with the PlatformIO
addons (see PlatformIO docs for more info). Then develop the new feature with the
2019-02-21 17:44:17 +01:00
guidelines below.
All PRs are automatically checked for some basic formatting/code mistakes with Github Actions.
2020-05-10 21:27:59 +02:00
These checks *must* pass for your PR to be mergeable.
2019-02-21 17:44:17 +01:00
2019-03-11 11:14:22 +01:00
Setting Up Git Environment
--------------------------
ESPHome's code-base is hosted on GitHub, and contributing is done exclusively through
"Pull Requests" (PRs) in the GitHub interface. So you need to set up your git environment
first.
When you want to create a patch for ESPHome, first go to the repository you want to contribute to
2019-05-12 22:44:59 +02:00
(esphome, etc) and click fork in the top right corner. This will create
2019-03-11 11:14:22 +01:00
a fork of the repository that you can modify and create git branches on.
.. code-block:: bash
# Clone your fork
git clone https://github.com/<YOUR_GITHUB_USERNAME>/<REPO_NAME>.git
2019-05-12 22:44:59 +02:00
# For example: git clone https://github.com/OttoWinter/esphome.git
2019-03-11 11:14:22 +01:00
# Add "upstream" remote
git remote add upstream https://github.com/esphome/<REPO_NAME>.git
# For example: git remote add upstream https://github.com/esphome/esphome.git
2019-03-11 11:14:22 +01:00
# For each patch, create a new branch from latest dev
git checkout dev
git pull upstream dev
git checkout -b <MY_NEW_FEATURE>
# For example: git checkout -b gpio-switch-fix
# Make your modifications, then commit changes with message describing changes
git add .
git commit -m "<COMMIT_MESSAGE>"
# For example: git commit -m "Fix GPIO Switch Not Turning Off Interlocked Switches"
# Upload changes
git push -u origin <BRANCH_NAME>
# For example: git push -u origin gpio-switch-fix
Then go to your repository fork in GitHub and wait for a create pull request message to show
up in the top (alternatively go to branches and create it from there). Fill out the
Pull Request template outlining your changes; if your PR is not ready to merge yet please
mark it as a draft PR in the dropdown of the green "create PR" button.
**Review Process:** ESPHome's code base tries to have a high code standard. At the bottom
of the Pull Request you will be able to see the "Github Actions" continuous integration check which
2019-03-11 11:14:22 +01:00
will automatically go through your patch and try to spot errors. If the CI check fails,
please see the Github Actions log and fix all errors that appear there. Only PRs that pass the automated
2019-03-11 11:14:22 +01:00
checks can be merged!
**Catching up with reality**: Sometimes other commits have been made to the same files
you edited. Then your changes need to be re-applied on top of the latest changes with
a "rebase". More info `here <https://developers.home-assistant.io/docs/en/development_catching_up.html>`__.
.. code-block:: bash
# Fetch the latest upstream changes and apply them
git fetch upstream dev
git rebase upstream/dev
2019-02-11 18:20:49 +01:00
Contributing to ESPHome
-----------------------
.. figure:: /images/logo-text.svg
:align: center
:width: 60.0%
2018-06-01 18:10:00 +02:00
2019-05-13 21:51:04 +02:00
This is a guide to contributing to the ESPHome codebase. ESPHome uses two languages for its project:
Python and C++.
The user configuration is read, validated and transformed into a custom firmware
2019-08-27 19:44:03 +02:00
with the Python side of the firmware.
2019-05-13 21:51:04 +02:00
The C++ codebase is what's actually running on the ESP and called the "runtime". This part of
2019-08-27 19:44:03 +02:00
the codebase should first set up the communication interface to a sensor/component/etc. and
2019-05-13 21:51:04 +02:00
communicate with the ESPHome core via the defined interfaces (like Sensor, BinarySensor, Switch).
1. Directory Structure
**********************
After you've :ref:`set up development environment <setup_dev_env>`, you will have a folder structure
like this:
.. code-block:: text
esphome
├── __main__.py
├── automation.py
├── codegen.py
├── config_validation.py
├── components
│   ├── __init__.py
│   ├── dht12
│   │   ├── __init__.py
│   │   ├── dht12.cpp
│   │   ├── dht12.h
│   │   ├── sensor.py
│   ├── restart
│   │   ├── __init__.py
│   │   ├── restart_switch.cpp
│   │   ├── restart_switch.h
│   │   ├── switch.py
│  ...
2018-06-01 18:10:00 +02:00
2019-05-13 21:51:04 +02:00
As you can see, all components are in the "components" folder. Each component is in its own
2019-08-27 19:44:03 +02:00
subfolder which contains the Python code (.py) and the C++ code (.h and .cpp).
2018-06-01 18:10:00 +02:00
2019-05-13 21:51:04 +02:00
Suppose the user types in the following:
.. code-block:: yaml
hello1:
sensor:
- platform: hello2
In both cases, ESPHome will automatically look for corresponding entries in the "components"
folder and find the directory with the given name. For example the first entry will make ESPHome
look at the ``esphome/components/hello1/__init__.py`` file and the second entry will result in
``esphome/components/hello2/sensor.py``.
Let's leave what's written in those files for (2.), but for now you should also know that
whenever a component is loaded, all the C++ source files in the folder of the component
2020-05-10 21:27:59 +02:00
are automatically copied into the generated PlatformIO project. So you just need to add the C++
2019-05-13 21:51:04 +02:00
source files in the folder and the ESPHome core will copy them with no additional code required
by the integration developer.
.. note::
For testing you can use :doc:`/components/external_components`.
ESPHome also has a ``custom_components`` mechanism like `Home Assistant does
<https://developers.home-assistant.io/docs/creating_component_index>`__. However this is
discouraged in favor of :doc:`/components/external_components`.
2019-05-13 21:51:04 +02:00
2. Config Validation
********************
The first thing ESPHome does is read and validate the user config. For this ESPHome has a powerful
"config validation" mechanism. Each component defines a config schema that is validated against
the user config.
2019-08-27 19:44:03 +02:00
To do this, all ESPHome Python modules that can be configured by the user have a special field
2019-05-13 21:51:04 +02:00
called ``CONFIG_SCHEMA``. An example of such a schema is shown below:
.. code-block:: python
import esphome.config_validation as cv
CONF_MY_REQUIRED_KEY = 'my_required_key'
CONF_MY_OPTIONAL_KEY = 'my_optional_key'
CONFIG_SCHEMA = cv.Schema({
cv.Required(CONF_MY_REQUIRED_KEY): cv.string,
cv.Optional(CONF_MY_OPTIONAL_KEY, default=10): cv.int_,
}).extend(cv.COMPONENT_SCHEMA)
This variable is automatically loaded by the ESPHome core and validated against.
The underlying system ESPHome uses for this is `voluptuous <https://github.com/alecthomas/voluptuous>`__.
Going into how to validate is out of scope for this guide, but the best way to learn is to look
at examples of how similar integrations validate user input.
A few point on validation:
2020-05-10 21:27:59 +02:00
- ESPHome puts a lot of effort into **strict validation** - If possible, all validation methods should be as strict
2019-05-13 21:51:04 +02:00
as possible and detect wrong user input at the validation stage (and not later).
- All default values should be defined in the schema (and not in C++ codebase or other code parts).
- Config keys should be descriptive - If the meaning of a key is not immediately obvious you should
always prefer long_but_descriptive_keys.
3. Code Generation
******************
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
After the user input has been successfully validated, the last step of the Python codebase
2019-05-13 21:51:04 +02:00
is called: Code generation.
As you may know, ESPHome converts the user's configuration into C++ code (you can see the generated
code under ``<NODE_NAME>/src/main.cpp``). Each integration must define its own ``to_code`` method
that converts the user input to C++ code.
This method is also automatically loaded and invoked by the ESPHome core. An example of
such a method can be seen below:
.. code-block:: python
import esphome.codegen as cg
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var)
cg.add(var.set_my_required_key(config[CONF_MY_REQUIRED_KEY]))
Again, going into all the details of ESPHome code generation would be out-of-scope. However,
ESPHome's code generation is 99% syntactic sugar - and again it's probably best to study other
integrations and just copy what they do.
There's one important concept for the ``to_code`` method: coroutines with ``yield``.
First the problem that leads to coroutines: In ESPHome, integrations can declare (via ``cg.Pvariable``) and access variables
(``cg.get_variable()``) - but sometimes when one part of the code base requests a variable
it has not been declared yet because the code for the component creating the variable has not run yet.
To allow for ID references, ESPHome uses so-called ``coroutines``. When you see a ``yield`` statement
in a ``to_code`` method, ESPHome will call the provided method - and if that method needs to wait
for a variable to be declared first, ``yield`` will wait until that variable has been declared.
After that, ``yield`` returns and the method will execute on the next line.
Next, there's a special method - ``cg.add`` - that you will often use. ``cg.add()`` does a very simple
2020-05-10 21:27:59 +02:00
thing: Any C++ declared in the parentheses of ``cg.add()`` will be added to the generated code.
2019-05-13 21:51:04 +02:00
If you do not call "add" a piece of code explicitly, it will not be added to the main.cpp file!
4. Runtime
2019-05-15 11:49:05 +02:00
**********
2019-05-13 21:51:04 +02:00
2019-08-27 19:44:03 +02:00
Okay, the Python part of the codebase is now complete - now let's talk about the C++ part of
2019-05-13 21:51:04 +02:00
creating a new integration.
The two major parts of any integration roughly are:
- Setup Phase
- Run Phase
When you create a new integration, your new component will inherit from :apiclass:`Component`.
That class has a special ``setup()`` method that will be called once to set up the component -
2019-08-27 19:44:03 +02:00
at the time the ``setup()`` method is called, all the setters generated by the Python codebase
2019-05-13 21:51:04 +02:00
have already run and the all fields are set for your class.
The ``setup()`` method should set up the communication interface for the component and check
if communication works (if not, it should call ``mark_failed()``).
Again, look at examples of other integrations to learn more.
The next thing that will be called with your component is ``loop()`` (or ``update()`` for a
:apiclass:`PollingComponent`). In these methods you should retrieve the latest data from the
component and publish them with the provided methods. One thing to note in these methods
is that anything in ``loop()`` or ``setup()`` **should not block**. Specifically methods like
``delay(10)`` should be avoided and delays above ~10ms are not permitted. The reason for this
is that ESPHome uses a central single-threaded loop for all components - if your component
blocks the whole loop will be slowed down.
Finally, your component should have a ``dump_config`` method that prints the user configuration.
5. Extras
*********
.. note::
This serves as documentation for some of ESPHome's internals and is not necessarily part of the
development guide.
2018-06-01 18:10:00 +02:00
2019-08-27 19:44:03 +02:00
All Python modules have some magic symbols that will automatically be loaded by the ESPHome
2019-05-12 22:44:59 +02:00
loader. These are:
2018-06-01 18:10:00 +02:00
2019-05-12 22:44:59 +02:00
- ``CONFIG_SCHEMA``: The configuration schema to validate the user config against.
- ``to_code``: The function that will be called with the validated configuration and should
create the necessary C++ source code.
- ``DEPENDENCIES``: Mark the component to depend on other components. If the user hasn't explicitly
added these components in their configuration, a validation error will be generated.
- ``AUTO_LOAD``: Automatically load an integration if the user hasn't added it manually.
- ``MULTI_CONF``: Mark this component to accept an array of configurations. If this is an
integer instead of a boolean, validation will only permit the given number of entries.
2019-05-12 22:44:59 +02:00
- ``CONFLICTS_WITH``: Mark a list of components as conflicting with this integration. If the user
has one of them in the config, a validation error will be generated.
2018-06-01 18:10:00 +02:00
2020-07-14 18:45:53 +02:00
- ``ESP_PLATFORMS``: Provide a list of allowed ESP types this integration works with.
- ``CODEOWNERS``: GitHub usernames or team names of people that are responsible for this integration.
You should add at least your GitHub username here, as well as anyone who helped you to write code
that is being included.
2018-06-01 18:10:00 +02:00
2019-05-13 21:51:04 +02:00
Codebase Standards
------------------
Standard for the esphome-core codebase:
- The C++ code style is based on the
`Google C++ Style Guide <https://google.github.io/styleguide/cppguide.html>`__ with a few modifications.
- function, method and variable names are ``lower_snake_case``
- class/struct/enum names should be ``UpperCamelCase``
- constants should be ``UPPER_SNAKE_CASE``
- fields should be ``protected`` and ``lower_snake_case_with_trailing_underscore_`` (DO NOT use private)
2019-05-13 21:51:04 +02:00
- It's preferred to use long variable/function names over short and non-descriptive ones.
- All uses of class members and member functions should be prefixed with
``this->`` to distinguish them from global functions in code review.
- Use two spaces, not tabs.
- Using ``#define`` s is discouraged and should be replaced with constants.
- Use ``using type_t = int;`` instead of ``typedef int type_t;``
- New components should dump their configuration using ``ESP_LOGCONFIG``
at startup in ``dump_config()``
- ESPHome uses a unified formatting tool for all source files (but this tool can be difficult to install).
When creating a new PR in GitHub, see the Github Actions output to see what formatting needs to be changed
2019-05-13 21:51:04 +02:00
and what potential problems are detected.
- The number of external libraries should be kept to a minimum. If the component you're developing has a simple
communication interface, please consider implementing the library natively in ESPHome.
- This depends on the communication interface of course - if the library is directly working
with pins or doesn't do any I/O itself, it's ok. However if it's something like I²C, then ESPHome's
2019-05-13 21:51:04 +02:00
own communication abstractions should be used. Especially if the library accesses a global variable/state
like ``Wire`` there's a problem because then the component may not modular (i.e. not possible
to create two instances of a component on one ESP)
- Integrations **must** use the provided abstractions like ``Sensor``, ``Switch`` etc.
Integration should specifically **not** directly access other components like for example
publish to MQTT topics.
- Implementations for new devices should contain reference links for the datasheet and other sample
implementations.
- Please test your changes :)
2018-06-01 18:10:00 +02:00
2019-05-28 10:25:27 +02:00
.. note::
You can also run the lint and Github Actions checks through a docker image:
2019-05-28 10:25:27 +02:00
.. code-block:: bash
# Full lint+test suite
docker run --rm -v "${PWD}/":/esphome -it esphome/esphome-lint script/fulltest
# Run lint only over changed files
docker run --rm -v "${PWD}/":/esphome -it esphome/esphome-lint script/quicklint
If you are using Windows and have docker installed the syntax is slightly different.
If you have cloned esphome to ``c:\edev\esphome`` the volume format is ``c/edev/esphome``
.. code-block:: bash
# convert the volume format
$current_dir=(Get-Location).Path.ToLower().Replace(':','').Replace('\','/')
# Run lint only over changed files from powershell
docker run --rm -v "$($current_dir):/esphome" -it esphome/esphome-lint script/quicklint
2019-05-28 10:25:27 +02:00
ESPHome via Gitpod
******************
An alternative to a local checkout and build is doing so via `Gitpod <https://www.gitpod.io>`__.
ESPHome will be installed for you and the dashboard wizard will run on startup.
You can also run the steps manually.
.. code-block:: bash
python setup.py install
To start a command line wizard, run
.. code-block:: bash
python esphome my_configuration.yaml wizard
To get the web-based dashboard, use
.. code-block:: bash
python esphome my_configuration.yaml dashboard
and allow exposing the web app at port 6052.
2018-06-01 18:10:00 +02:00
See Also
2018-10-12 16:33:22 +02:00
--------
2018-06-01 18:10:00 +02:00
- :doc:`ESPHome index </index>`
2018-06-01 18:10:00 +02:00
- :doc:`faq`
- :ghedit:`Edit`