esphome-docs/guides/migrate_sonoff_tasmota.rst

77 lines
2.4 KiB
ReStructuredText
Raw Normal View History

2018-06-01 18:10:00 +02:00
Migrating from Sonoff Tasmota
=============================
2018-11-14 22:12:27 +01:00
.. seo::
2019-02-16 23:25:23 +01:00
:description: Migration guide for installing ESPHome on ESPs running Sonoff Tasmota.
:image: tasmota.png
2018-11-14 22:12:27 +01:00
2018-06-01 18:10:00 +02:00
Migrating from previous Sonoff Tasmota setups is very easy. You just need to have
2019-02-16 23:25:23 +01:00
ESPHome create a binary for you and then upload that in the Tasmota web interface.
2018-06-01 18:10:00 +02:00
Getting the Binary
------------------
2018-06-01 18:10:00 +02:00
First follow the guides for the :ref:`different supported devices <devices>` and create a configuration
file. Then, generate and download the binary:
- **Using the Home Assistant add-on/dashboard**: Just click the ``COMPILE``
button, wait for the compilation to end and press the ``DOWNLOAD BINARY``
button.
2018-06-01 18:10:00 +02:00
.. figure:: images/download_binary.png
2019-02-16 23:25:23 +01:00
- **Using the command line**: run ``esphome livingroom.yaml compile`` (replacing
2018-06-01 18:10:00 +02:00
``livingroom.yaml`` with your configuration file of course) and navigate to the
``<NODE_NAME>/.pioenvs/<NODE_NAME>/`` folder. There you will find a ``firmware.bin`` file.
This is the binary that you will upload.
2018-06-01 18:10:00 +02:00
Uploading the Binary
--------------------
2018-06-01 18:10:00 +02:00
To upload the binary, navigate to the Tasmota web interface and enter the
2018-06-01 18:10:00 +02:00
"Firmware Upgrade" section.
.. figure:: images/tasmota_main.png
:align: center
:width: 60.0%
In the "Upgrade by file upload" section, choose the binary you previously downloaded
.. figure:: images/tasmota_ota.png
:align: center
:width: 60.0%
2019-02-16 23:25:23 +01:00
If everything succeeds, you will see an "Upload Successful" message and ESPHome
will connect to the WiFi network configured in your .yaml file. 🎉
2018-06-01 18:10:00 +02:00
.. figure:: images/tasmota_upload.png
:align: center
:width: 60.0%
Happy Hacking!
2019-05-12 22:44:59 +02:00
.. note::
When using the :doc:`esp8266_pwm output </components/output/esp8266_pwm>` platform and
switching from Tasmota, you need to power-cycle the device once. After that
the dimming functionality will work as usual and no more power cycles are required.
.. note::
If you are using Tasmota 8+ and get an error after uploading the firmware, go to the console and type ```SetOption78 1```, then restart the device and try the firmware again.
2018-06-01 18:10:00 +02:00
See Also
2018-10-12 16:33:22 +02:00
--------
2018-06-01 18:10:00 +02:00
- :doc:`/devices/sonoff_s20`
- :doc:`/devices/sonoff_4ch`
- :doc:`/devices/sonoff`
- :doc:`/devices/nodemcu_esp8266`
- :doc:`/devices/nodemcu_esp32`
- :doc:`/devices/esp8266`
- :doc:`/devices/esp32`
2018-06-01 18:10:00 +02:00
- :doc:`migrate_espurna`
- :doc:`migrate_espeasy`
- :ghedit:`Edit`