esphome-docs/components/display/ssd1351.rst

109 lines
3.3 KiB
ReStructuredText
Raw Normal View History

SSD1351 OLED Display
====================
.. seo::
:description: Instructions for setting up SSD1351 OLED display drivers.
:image: ssd1351.jpg
.. _ssd1351-spi:
Usage
-----
The ``ssd1351_spi`` display platform allows you to use
SSD1351 (`datasheet <https://cdn-shop.adafruit.com/datasheets/SSD1351-Revision+1.3.pdf>`__,
`Adafruit 128x128 <https://www.adafruit.com/product/1431>`__,
`Adafruit 128x96 <https://www.adafruit.com/product/1673>`__,
`Waveshare 128x128 <https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.5inch-rgb-oled-module.htm>`__)
displays with ESPHome. This component is for displays that are connected via the 4-Wire :ref:`SPI bus <spi>`.
.. figure:: images/ssd1351-full.jpg
:align: center
:width: 75.0%
SSD1351 OLED Display
Connect CLK, DIN, CS, DC, and RST to pins on your ESP. For power, the Adafruit modules have two pins; connect
3.3 volts to their ``3v`` **or** connect 5 volts to their ``+`` pin. The Waveshare modules have only a Vcc pin
which should be connected to 3.3 volts only. Connect the GND or G pin to GND.
.. code-block:: yaml
# Example configuration entry
spi:
clk_pin: D5
mosi_pin: D7
display:
- platform: ssd1351_spi
model: "SSD1351 128x128"
reset_pin: D0
cs_pin: D8
dc_pin: D1
lambda: |-
it.print(0, 0, id(font), "Hello World!");
Configuration variables
***********************
- **model** (**Required**): The model of the display. Options are:
- ``SSD1351 128x128`` (SSD1351 with 128 columns and 128 rows)
- ``SSD1351 128x96`` (SSD1351 with 128 columns and 96 rows)
- **reset_pin** (:ref:`Pin Schema <config-pin_schema>`): The RESET pin.
- **cs_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The pin on the ESP that that the CS line is connected to.
The CS line can be connected to GND if this is the only device on the SPI bus.
- **dc_pin** (:ref:`Pin Schema <config-pin_schema>`): The DC pin.
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
See :ref:`display-engine` for more information.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to re-draw the screen. Defaults to ``5s``.
- **pages** (*Optional*, list): Show pages instead of a single lambda. See :ref:`display-pages`.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
Configuration examples
**********************
Add a ``color:`` section to your YAML configuration; please see :ref:`color <config-color>` for more detail on this configuration section.
.. code-block:: yaml
color:
- id: my_red
red: 100%
green: 3%
blue: 5%
...
display:
...
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height(), id(my_red));
To bring in color images:
.. code-block:: yaml
image:
- file: "image.jpg"
id: my_image
resize: 120x120
type: RGB
...
display:
...
lambda: |-
it.image(0, 0, id(my_image));
See Also
--------
- :doc:`index`
- :apiref:`ssd1351_base/ssd1351_base.h`
- `SSD1351 Library <https://github.com/adafruit/Adafruit-SSD1351-library>`__ by `Adafruit <https://www.adafruit.com/>`__
- :ghedit:`Edit`