esphome-docs/components/light/tuya.rst

Tuya Dimmer
===========

.. seo::
    :description: Instructions for setting up a Tuya dimmer switch.
    :image: brightness-medium.png

The ``tuya`` light platform creates a simple brightness-only light from a
tuya serial component.

.. warning::

    Some of these dimmers have no way of serial flashing without destroying them.
    Make sure you have some way to OTA upload configured before flashing.  This means you need
    to have working wifi, ota, and maybe api sections in the config.
    The dimmer switch I got would hang if the logger was configured to use the serial port
    which meant it was bricked until I cut it open.

The Tuya dimmer requires a :doc:`/components/tuya` to be configured.

Here is an example output for a Tuya dimmer:

.. code-block:: text

    [21:50:28][C][tuya:024]: Tuya:
    [21:50:28][C][tuya:031]:   Datapoint 3: int value (value: 139)
    [21:50:28][C][tuya:029]:   Datapoint 1: switch (value: OFF)

On this dimmer, the toggle switch is datapoint 1 and the dimmer value is datapoint 3.
Now you can create the light.

.. code-block:: yaml

    # Create a light using the dimmer
    light:
      - platform: "tuya"
        name: "dim1"
        dimmer_datapoint: 3
        switch_datapoint: 1

Configuration variables:
------------------------

- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **name** (**Required**, string): The name of the light.
- **dimmer_datapoint** (*Optional*, int): The datapoint id number of the dimmer value.
- **switch_datapoint** (*Optional*, int): The datapoint id number of the power switch.  My dimmer
  required this to be able to turn the light on and off.  Without this you would only be able to
  change the brightness and would have to toggle the light using the physical buttons.
- **min_value** (*Optional*, int, default 0): The lowest dimmer value allowed.  My dimmer had a
  minimum of 25 and wouldn't even accept anything lower, but this option is available if necessary.
- **max_value** (*Optional*, int, default 255): The highest dimmer value allowed.  My dimmer had a
  maximum of 255 which seems like it would be the typical value.
- All other options from :ref:`Light <config-light>`.
- At least one of *dimmer_datapoint* or *switch_datapoint* must be provided.

.. note::

    The MCU on the Tuya dimmer handles transitions and gamma correction on its own.
    Therefore the ``gamma_correct`` setting default is ``1.0`` and the the
    ``default_transition_length`` parameter is ``0s`` by default.

See Also
--------

- :doc:`/components/tuya`
- :doc:`/components/light/index`
- :apiref:`tuya/light/tuya_light.h`
- :ghedit:`Edit`