esphome-docs/components/tuya.rst

63 lines
1.5 KiB
ReStructuredText
Raw Normal View History

Tuya MCU
========
.. seo::
:description: Instructions for setting up the Tuya component.
:image: tuya.png
The ``tuya`` component creates a serial connection to the Tuya MCU for platforms to use.
.. figure:: /images/tuya.png
:align: center
:width: 40%
The ``tuya`` serial component requires a :ref:`UART bus <uart>` to be configured.
Put the ``tuya`` component in the config and it will list the possible devices for you in the config log.
.. code-block:: yaml
# Example configuration entry
# Make sure your wifi will connect
wifi:
ssid: "ssid"
password: "password"
# Make sure logging is not using the serial port
logger:
baud_rate: 0
# Enable Home Assistant API
api:
# Make sure you can upload new firmware OTA
ota:
uart:
rx_pin: GPIO3
tx_pin: GPIO1
baud_rate: 9600
# Register the Tuya MCU connection
tuya:
Here is an example output for a Tuya fan controller:
.. code-block:: text
[12:39:45][C][tuya:023]: Tuya:
[12:39:45][C][tuya:032]: Datapoint 1: switch (value: ON)
[12:39:45][C][tuya:036]: Datapoint 3: enum (value: 1)
[12:39:45][C][tuya:036]: Datapoint 6: enum (value: 0)
[12:39:45][C][tuya:034]: Datapoint 7: int value (value: 0)
[12:39:45][C][tuya:032]: Datapoint 9: switch (value: OFF)
[12:39:45][C][tuya:046]: Product: '{"p":"hqq73kftvzh8c92u","v":"1.0.0","m":0}'
See Also
--------
- :doc:`/components/fan/tuya`
- :doc:`/components/light/tuya`
- :apiref:`tuya/tuya.h`
- :ghedit:`Edit`