esphome-docs/components/sensor/hdc1080.rst

HDC1080 Temperature+Humidity Sensor
===================================

.. seo::
    :description: Instructions for setting up HDC1080 temperature and humidity sensors.
    :image: hdc1080.jpg
    :keywords: HDC1080

The HDC1080 Temperature+Humidity sensor allows you to use your HDC1080
(`datasheet <http://www.ti.com/lit/ds/symlink/hdc1080.pdf>`__,
`Adafruit <https://www.adafruit.com/product/2635>`__) sensors with
ESPHome. The :ref:`I²C Bus <i2c>` is
required to be set up in your configuration for this sensor to work.

.. figure:: images/hdc1080-full.jpg
    :align: center
    :target: `Adafruit`_
    :width: 50.0%

    HDC1080 Temperature & Humidity Sensor. Image by `Adafruit`_.

.. _Adafruit: https://www.adafruit.com/product/2635

.. figure:: images/temperature-humidity.png
    :align: center
    :width: 80.0%

.. code-block:: yaml

    # Example configuration entry
    sensor:
      - platform: hdc1080
        temperature:
          name: "Living Room Temperature"
        humidity:
          name: "Living Room Humidity"
        update_interval: 60s

Configuration variables:
------------------------

- **temperature** (**Required**): The information for the temperature sensor.

  - **name** (**Required**, string): The name for the temperature sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **humidity** (**Required**): The information for the humidity sensor

  - **name** (**Required**, string): The name for the humidity sensor.
  - **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
  - All other options from :ref:`Sensor <config-sensor>`.

- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.


Currently, the platform doesn't support activating the built-in heater,
as it seems to only be rarely of use. If you need it, please open an
issue.

Notes
--------

This library also appears to the compatible with the  `DFRobot CHT8305 I2C Temperature and Humidity Sensor <https://wiki.dfrobot.com/SKU_SEN0546_I2C_Temperature_and_Humidity_Sensor_Stainless_Steel_Shell>`__) on address 0x40.

.. code-block:: yaml

    # Example configuration entry
    sensor:
      - platform: hdc1080
        temperature:
          name: "Outside Temperature"
        humidity:
          name: "Outside Humidity"
        address: 0x40
        update_interval: 60s


See Also
--------

- :ref:`sensor-filters`
- :doc:`dht`
- :doc:`dht12`
- :doc:`htu21d`
- :doc:`sht3xd`
- :apiref:`hdc1080/hdc1080.h`
- `HDC1080 Library <https://github.com/closedcube/ClosedCube_HDC1080_Arduino>`__ by `ClosedCube <https://www.tindie.com/stores/closedcube/>`__
- :ghedit:`Edit`