esphome-docs/components/light/rgb.rst

75 lines
2.5 KiB
ReStructuredText
Raw Normal View History

2018-05-13 11:37:02 +02:00
RGB Light
=========
2018-11-14 22:12:27 +01:00
.. seo::
2019-02-16 23:25:23 +01:00
:description: Instructions for setting up RGB lights in ESPHome.
2018-11-14 22:12:27 +01:00
:image: rgb.png
2018-06-01 18:10:00 +02:00
The ``rgb`` light platform creates an RGB light from 3 :ref:`float output components <output>`
(one for each color channel).
2018-05-13 11:37:02 +02:00
2018-06-01 18:10:00 +02:00
.. figure:: images/rgb-strip.jpg
:align: center
:width: 75.0%
Example of an RGB LED strip that can be used with this component.
.. figure:: images/rgb-ui.png
:align: center
:width: 40.0%
2018-05-13 11:37:02 +02:00
.. code-block:: yaml
2018-05-13 11:37:02 +02:00
# Example configuration entry
light:
- platform: rgb
name: "Living Room Lights"
red: output_component1
green: output_component2
blue: output_component3
2019-02-16 23:25:23 +01:00
# Example output entry
output:
- platform: esp8266_pwm
id: output_component1
pin: D1
# Repeat for green and blue output
2018-05-13 11:37:02 +02:00
Configuration variables:
2018-08-24 22:44:01 +02:00
------------------------
2018-05-13 11:37:02 +02:00
2018-06-01 18:10:00 +02:00
- **name** (**Required**, string): The name of the light.
- **red** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the red channel.
- **green** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the green channel.
- **blue** (**Required**, :ref:`config-id`): The id of the float :ref:`output` to use for the blue channel.
- **gamma_correct** (*Optional*, float): The `gamma correction
factor <https://en.wikipedia.org/wiki/Gamma_correction>`__ for the light. Defaults to ``2.8``.
- **default_transition_length** (*Optional*, :ref:`config-time`): The length of
the transition if no transition parameter is provided by Home Assistant. Defaults to ``1s``.
- **effects** (*Optional*, list): A list of :ref:`light effects <light-effects>` to use for this light.
2018-06-01 18:10:00 +02:00
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
2019-02-17 12:28:17 +01:00
- **internal** (*Optional*, boolean): Mark this component as internal. Internal components will
not be exposed to the frontend (like Home Assistant). Only specifying an ``id`` without
a ``name`` will implicitly set this to true.
- If MQTT enabled, all other options from :ref:`MQTT Component <config-mqtt-component>`.
2018-06-01 18:10:00 +02:00
See Also
2018-08-24 22:44:01 +02:00
--------
2018-06-01 18:10:00 +02:00
.. figure:: images/rgb-detail.jpg
:align: center
:width: 75.0%
- :doc:`/components/output/index`
- :doc:`/components/light/index`
- :doc:`/components/light/rgbw`
- :doc:`/components/power_supply`
- :doc:`/components/output/ledc`
- :doc:`/components/output/esp8266_pwm`
- :doc:`/components/output/pca9685`
- :doc:`/components/output/my9231`
- :apiref:`light/light_state.h`
- :ghedit:`Edit`
2018-10-12 16:33:22 +02:00
.. disqus::