esphome-docs/components/output/sm2335.rst

170 lines
6.7 KiB
ReStructuredText
Raw Normal View History

SM2335 LED driver
==================
.. seo::
:description: Instructions for setting up SM2335 LED drivers in ESPHome.
:keywords: SM2335, SwitchBot Color Bulb W1401400
.. _sm2335-component:
Component/Hub
-------------
2023-02-09 19:24:22 +01:00
The SM2335 component represents a SM2335 LED driver chain in
ESPHome. Communication is done with two GPIO pins (DATA and CLK).
It is used in some smart light bulbs:
- SwitchBot Color Bulb W1401400
To use the channels of this components, you first need to setup the
global ``sm2335`` hub and give it an id, and then define the
:ref:`individual output channels <sm2335-output>`.
.. code-block:: yaml
# Example configuration entry
sm2335:
data_pin: GPIOXX
clock_pin: GPIOXX
max_power_color_channels: 9
max_power_white_channels: 9
Configuration variables:
************************
- **data_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin used for DATA.
- **clock_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin which CLK is
connected to.
- **id** (*Optional*, :ref:`config-id`): The id to use for
this ``sm2335`` component. Use this if you have multiple SM2335 chains
connected at the same time.
- **max_power_color_channels** (*Optional*, int 0-15): Adjusts the current supplied to the
color channels, higher is more power. Default is 2 per SM2335 datasheet. See table below.
- **max_power_white_channels** (*Optional*, int 0-15): Adjusts the current supplied to the
white channels, higher is more power. Default is 4 per SM2335 datasheet. See table below.
.. note::
The LED driver may be able to tolerate more power than
the bulb is designed to handle, start with lower values
and increase slowly, comparing to a stock bulb to verify
what is safe for your model.
+---------------------------------+-----------------+
| max_power_white_channels value | actual current |
+=================================+=================+
| 0 | 5 mA |
+---------------------------------+-----------------+
| 1 | 10 mA |
+---------------------------------+-----------------+
| 2 | 15 mA |
+---------------------------------+-----------------+
| 3 | 20 mA |
+---------------------------------+-----------------+
| 4 | 25 mA (default) |
+---------------------------------+-----------------+
| 5 | 30 mA |
+---------------------------------+-----------------+
| 6 | 35 mA |
+---------------------------------+-----------------+
| 7 | 40 mA |
+---------------------------------+-----------------+
| 8 | 45 mA |
+---------------------------------+-----------------+
| 9 | 50 mA |
+---------------------------------+-----------------+
| 10 | 55 mA |
+---------------------------------+-----------------+
| 11 | 60 mA |
+---------------------------------+-----------------+
| 12 | 65 mA |
+---------------------------------+-----------------+
| 13 | 70 mA |
+---------------------------------+-----------------+
| 14 | 75 mA |
+---------------------------------+-----------------+
| 15 | 80 mA |
+---------------------------------+-----------------+
+---------------------------------+-----------------+
| max_power_color_channels value | actual current |
+=================================+=================+
| 0 | 10 mA |
+---------------------------------+-----------------+
| 1 | 20 mA |
+---------------------------------+-----------------+
| 2 | 30 mA (default) |
+---------------------------------+-----------------+
| 3 | 40 mA |
+---------------------------------+-----------------+
| 4 | 50 mA |
+---------------------------------+-----------------+
| 5 | 60 mA |
+---------------------------------+-----------------+
| 6 | 70 mA |
+---------------------------------+-----------------+
| 7 | 80 mA |
+---------------------------------+-----------------+
| 8 | 90 mA |
+---------------------------------+-----------------+
| 9 | 100 mA |
+---------------------------------+-----------------+
| 10 | 110 mA |
+---------------------------------+-----------------+
| 11 | 120 mA |
+---------------------------------+-----------------+
| 12 | 130 mA |
+---------------------------------+-----------------+
| 13 | 140 mA |
+---------------------------------+-----------------+
| 14 | 150 mA |
+---------------------------------+-----------------+
| 15 | 160 mA |
+---------------------------------+-----------------+
.. _sm2335-output:
Output
------
The SM2335 output component exposes a SM2335 channel of a global
:ref:`sm2335-component` as a float output.
.. code-block:: yaml
# Individual outputs
output:
- platform: sm2335
id: output_red
channel: 1
Configuration variables:
************************
- **id** (**Required**, :ref:`config-id`): The id to use for this output component.
- **channel** (**Required**, int): Chose the channel of the SM2335 chain of
this output component.
- **sm2335_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the
:ref:`sm2335-component`.
Use this if you have multiple SM2335 chains you want to use at the same time.
- All other options from :ref:`Output <config-output>`.
.. note::
This driver does support enabling of both the color and the white channels
at the same time, but it is not encourage. Therefore, the :ref:`rgbw_color_interlock`
should be set to true when using this driver for safest operation.
See Also
--------
- :doc:`/components/output/index`
- :doc:`/components/output/esp8266_pwm`
- :doc:`/components/output/sm2135`
- :doc:`/components/output/sm2235`
- :doc:`/components/light/rgb`
- :doc:`/components/light/rgbw`
- :doc:`/components/light/rgbww`
- :doc:`/components/power_supply`
- :ghedit:`Edit`