esphome-docs/components/output/sm2135.rst

138 lines
3.8 KiB
ReStructuredText
Raw Normal View History

2021-05-12 21:14:26 +02:00
SM2135 LED driver
==================
.. seo::
:description: Instructions for setting up SM2135 LED drivers in ESPHome.
:keywords: SM2135, Calex Smart RGB Reflector
.. _sm2135-component:
Component/Hub
-------------
2021-05-12 21:14:26 +02:00
The SM2135 component represents a SM2135 LED diver chain
(`SM2135 description <https://github.com/arendst/Sonoff-Tasmota/files/3656603/SM2135E_zh-CN_en-US_translated.pdf>`__,
`SM2135 description <https://github.com/arendst/Sonoff-Tasmota/files/3656603/SM2135E_zh-CN_en-US_translated.pdf>`__) in
ESPHome. Communication is done with two GPIO pins (MOSI and SCLK).
It is used in some smart light bulbs:
- Calex Smart RGB Reflector LED lamp (GU10)
- LSC Smart GU10
2021-05-12 21:14:26 +02:00
To use the channels of this components, you first need to setup the
global ``sm2135`` hub and give it an id, and then define the
:ref:`individual output channels <sm2135-output>`.
.. code-block:: yaml
# Example configuration entry
sm2135:
data_pin: GPIO12
clock_pin: GPIO14
# Individual outputs
output:
- platform: sm2135
id: output_red
channel: 0
max_power: 0.8
- platform: sm2135
id: output_green
channel: 1
max_power: 0.8
- platform: sm2135
id: output_blue
channel: 2
max_power: 0.8
- platform: sm2135
id: output_white
channel: 3
max_power: 0.8
- platform: sm2135
id: output_warmwhite
channel: 4
max_power: 0.8
Configuration variables:
************************
- **data_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin used for MOSI.
- **clock_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin which SCLK is
2021-05-12 21:14:26 +02:00
connected to.
- **id** (*Optional*, :ref:`config-id`): The id to use for
this ``sm2135`` component. Use this if you have multiple SM2135 chains
connected at the same time.
.. _sm2135-output:
Output
------
2021-05-12 21:14:26 +02:00
The SM2135 output component exposes a SM2135 channel of a global
:ref:`sm2135-component` as a float output.
.. code-block:: yaml
# Example configuration entry
sm2135:
data_pin: GPIO12
clock_pin: GPIO14
# Individual outputs
output:
- platform: sm2135
id: output_red
channel: 0
max_power: 0.8
- platform: sm2135
id: output_green
channel: 1
max_power: 0.8
- platform: sm2135
id: output_blue
channel: 2
max_power: 0.8
- platform: sm2135
id: output_white
channel: 3
max_power: 0.8
- platform: sm2135
id: output_warmwhite
channel: 4
max_power: 0.8
Configuration variables:
************************
- **id** (**Required**, :ref:`config-id`): The id to use for this output component.
- **channel** (**Required**, int): Chose the channel of the SM2135 chain of
this output component.
- **sm2135_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the
:ref:`sm2135-component`.
Use this if you have multiple SM2135 chains you want to use at the same time.
- All other options from :ref:`Output <config-output>`.
.. note::
The white LEDs are much brighter than the color LEDs. To get uniform brightness
2021-05-12 21:14:26 +02:00
for both color and white you will need to limit the white led power.
.. note::
This driver does not support enabling of both the color and the white channels
at the same time. Therefore, the :ref:`rgbw_color_interlock` should be set to true
when using this driver.
See Also
--------
- :doc:`/components/output/index`
- :doc:`/components/output/esp8266_pwm`
- :doc:`/components/output/sm16716`
- :doc:`/components/light/rgb`
- :doc:`/components/light/rgbw`
- :doc:`/components/light/rgbww`
- :doc:`/components/power_supply`
- :apiref:`output/sm2135_output_component.h`
- :ghedit:`Edit`