esphome-docs/components/sensor/iaqcore.rst

52 lines
1.6 KiB
ReStructuredText
Raw Normal View History

AMS iAQ-Core Indoor Air Quality Sensor
======================================
.. seo::
:description: Instructions for setting up the iAQ-Core sensor.
:image: iaqcore.jpg
:keywords: co2, tvoc, i2c
The AMS iAQ-Core sensor allows you to use your
(`datasheet <https://www.sciosense.com/wp-content/uploads/documents/iaQ-Core-Datasheet.pdf>`__)
sensors with ESPHome.
.. figure:: images/iaqcore.jpg
:align: center
:width: 30.0%
AMS iAQ-Core Indoor Air Quality Sensor.
The iAQ-Core sensor module is used to measure VOC levels and provide CO2 equivalent and TVOC equivalent predictions. The data is available via I²C bus.
To use the sensor, first set up an :ref:`I²C Bus <i2c>` and connect the sensor to the specified pins.
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: iaqcore
address: 0x5A
update_interval: 60s
co2:
name: "iAQ Core CO2 Sensor"
tvoc:
name: "iAQ Core TVOC Sensor"
Configuration variables:
------------------------
- **i2c_id** (*Optional*, ID): The id of the I²C Bus.
- **address** (*Optional*, int): Manually specifiy the I²C address of the sensor. Defaults to ``0x5A``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
- **co2** (*Optional*): The configuration for the CO2 sensor. All options from
:ref:`Sensor <config-sensor>`.
- **tvoc** (*Optional*): The configuration for the TVOC sensor. All options from
:ref:`Sensor <config-sensor>`.
See Also
--------
- :ref:`sensor-filters`
- :doc:`/components/sensor/index`
- :ghedit:`Edit`