esphome-docs/components/esphome.rst

306 lines
12 KiB
ReStructuredText
Raw Normal View History

2019-02-16 23:25:23 +01:00
ESPHome Core Configuration
==========================
2018-05-13 11:37:02 +02:00
2018-11-14 22:12:27 +01:00
.. seo::
2019-02-16 23:25:23 +01:00
:description: Instructions for setting up the core ESPHome configuration.
:image: cloud-circle.png
2018-11-14 22:12:27 +01:00
2019-02-16 23:25:23 +01:00
Here you specify some core information that ESPHome needs to create
2018-05-13 11:37:02 +02:00
firmwares. Most importantly, this is the section of the configuration
where you specify the **name** of the node, the **platform** and
**board** youre using.
.. code-block:: yaml
2018-05-13 11:37:02 +02:00
# Example configuration entry
2019-02-16 23:25:23 +01:00
esphome:
2018-05-13 11:37:02 +02:00
name: livingroom
2019-10-14 11:27:41 +02:00
comment: Living room ESP32 controller
2018-05-13 11:37:02 +02:00
platform: ESP32
board: nodemcu-32s
Configuration variables:
2018-08-24 22:44:01 +02:00
------------------------
2018-05-13 11:37:02 +02:00
2018-06-01 18:10:00 +02:00
- **name** (**Required**, string): This is the name of the node. It
2020-05-10 21:27:59 +02:00
should always be unique in your ESPhome network. May only contain lowercase
2019-06-19 11:42:30 +02:00
characters, digits and underscores. See :ref:`esphome-changing_node_name`.
2018-06-01 18:10:00 +02:00
- **platform** (**Required**, string): The platform your board is on,
2019-02-16 23:25:23 +01:00
either ``ESP32`` or ``ESP8266``. See :ref:`esphome-arduino_version`.
- **board** (**Required**, string): The board ESPHome should
2020-05-10 21:27:59 +02:00
specify for PlatformIO. For the ESP32, choose the appropriate one
2018-06-01 18:10:00 +02:00
from `this list <http://docs.platformio.org/en/latest/platforms/espressif32.html#boards>`__
and use `this list <http://docs.platformio.org/en/latest/platforms/espressif8266.html#boards>`__
2019-05-12 22:44:59 +02:00
for ESP8266-based boards. *This only affects pin aliases and some internal settings*, if unsure
choose the generic board option!
2018-06-13 22:38:49 +02:00
Advanced options:
2020-05-10 21:27:59 +02:00
- **arduino_version** (*Optional*): The version of the Arduino framework to link the project against.
2019-02-16 23:25:23 +01:00
See :ref:`esphome-arduino_version`.
- **build_path** (*Optional*, string): Customize where ESPHome will store the build files
2020-05-10 21:27:59 +02:00
for your node. By default, ESPHome puts all PlatformIO project files under a folder ``<NODE_NAME>/``,
2018-06-13 22:38:49 +02:00
but you can customize this behavior using this option.
2020-05-10 21:27:59 +02:00
- **platformio_options** (*Optional*, mapping): Additional options to pass over to PlatformIO in the
2019-02-16 23:25:23 +01:00
platformio.ini file. See :ref:`esphome-platformio_options`.
2018-09-23 19:00:31 +02:00
- **use_custom_code** (*Optional*, boolean): Whether to configure the project for writing custom components.
This sets up some flags so that custom code should compile correctly
2019-03-17 12:10:03 +01:00
- **includes** (*Optional*, list of files): A list of C[++] files to include in the main (auto-generated) sketch file
2018-11-26 16:50:50 +01:00
for custom components. The paths in this list are relative to the directory where the YAML configuration file
2019-05-29 19:28:30 +02:00
is in. Should have file extension ``.h`` - See :ref:`esphome-includes` for more info.
2018-11-26 16:50:50 +01:00
- **libraries** (*Optional*, list of libraries): A list of `platformio libraries <https://platformio.org/lib>`__
to include in the project. See `platformio lib install <https://docs.platformio.org/en/latest/userguide/lib/cmd_install.html>`__.
2019-10-14 11:27:41 +02:00
- **comment** (*Optional*, string): Additional text information about this node. Only for display in UI.
ESP8266 Options:
- **esp8266_restore_from_flash** (*Optional*, boolean): Whether to save & restore data from flash on ESP8266s.
Defaults to ``no``. See :ref:`esphome-esp8266_restore_from_flash` for more info
2018-06-13 22:38:49 +02:00
Automations:
2018-06-07 17:07:02 +02:00
- **on_boot** (*Optional*, :ref:`Automation <automation>`): An automation to perform
2019-02-16 23:25:23 +01:00
when the node starts. See :ref:`esphome-on_boot`.
2018-06-07 17:07:02 +02:00
- **on_shutdown** (*Optional*, :ref:`Automation <automation>`): An automation to perform
2019-02-16 23:25:23 +01:00
right before the node shuts down. See :ref:`esphome-on_shutdown`.
2018-09-23 19:00:31 +02:00
- **on_loop** (*Optional*, :ref:`Automation <automation>`): An automation to perform
2019-02-16 23:25:23 +01:00
on each ``loop()`` iteration. See :ref:`esphome-on_loop`.
2018-06-01 18:10:00 +02:00
2019-02-16 23:25:23 +01:00
.. _esphome-arduino_version:
2018-09-23 19:00:31 +02:00
``arduino_version``
-------------------
2020-05-10 21:27:59 +02:00
ESPHome uses the Arduino framework internally to handle all low-level interactions like
initializing the WiFi driver and so on. Unfortunately, every Arduino framework version often
2018-09-23 19:00:31 +02:00
has its own quirks and bugs, especially concerning WiFi performance. With the ``arduino_version``
2020-05-10 21:27:59 +02:00
option you can tell ESPHome which Arduino framework to use for compiling.
2018-09-23 19:00:31 +02:00
.. code-block:: yaml
2018-09-23 19:00:31 +02:00
# Example configuration entry
2019-02-16 23:25:23 +01:00
esphome:
2018-09-23 19:00:31 +02:00
# ...
# Default: use the recommended version, usually this equals
# the latest version.
arduino_version: recommended
# Use the latest stable version
arduino_version: latest
# Use the latest staged version from GitHub, try this if you have WiFi problems
arduino_version: dev
# Use a specific version
arduino_version: 2.3.0
2020-05-10 21:27:59 +02:00
For the ESP8266, you currently can manually pin the Arduino version to these values (see the full
list of Arduino frameworks `here <https://github.com/esp8266/Arduino/releases>`__):
2018-09-23 19:00:31 +02:00
* `2.7.2 <https://github.com/esp8266/Arduino/releases/tag/2.7.2>`__ (default)
* `2.7.1 <https://github.com/esp8266/Arduino/releases/tag/2.7.1>`__
* `2.7.0 <https://github.com/esp8266/Arduino/releases/tag/2.7.0>`__
* `2.6.3 <https://github.com/esp8266/Arduino/releases/tag/2.6.3>`__
* `2.6.2 <https://github.com/esp8266/Arduino/releases/tag/2.6.2>`__
* `2.6.1 <https://github.com/esp8266/Arduino/releases/tag/2.6.1>`__
* `2.5.2 <https://github.com/esp8266/Arduino/releases/tag/2.5.2>`__
2019-06-19 11:28:47 +02:00
* `2.5.1 <https://github.com/esp8266/Arduino/releases/tag/2.5.1>`__
2019-03-14 16:41:37 +01:00
* `2.5.0 <https://github.com/esp8266/Arduino/releases/tag/2.5.0>`__
2019-11-09 18:39:13 +01:00
* `2.4.2 <https://github.com/esp8266/Arduino/releases/tag/2.4.2>`__
2018-09-23 19:00:31 +02:00
* `2.4.1 <https://github.com/esp8266/Arduino/releases/tag/2.4.1>`__
* `2.4.0 <https://github.com/esp8266/Arduino/releases/tag/2.4.0>`__
* `2.3.0 <https://github.com/esp8266/Arduino/releases/tag/2.3.0>`__
2018-09-23 19:00:31 +02:00
2020-05-10 21:27:59 +02:00
For the ESP32, there are these Arduino `framework versions <https://github.com/espressif/arduino-esp32/releases>`__:
2019-03-14 16:41:37 +01:00
2019-11-09 18:39:13 +01:00
- `1.0.4 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.4>`__ (default)
- `1.0.3 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.3>`__
2019-06-19 11:28:47 +02:00
- `1.0.2 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.2>`__
2019-11-09 18:39:13 +01:00
- `1.0.1 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.1>`__
2019-06-19 11:28:47 +02:00
- `1.0.0 <https://github.com/espressif/arduino-esp32/releases/tag/1.0.0>`__
2018-06-03 12:50:44 +02:00
.. _esphome-esp8266_restore_from_flash:
``esp8266_restore_from_flash``
------------------------------
With this option you can control where the state of certain components is kept on the ESP.
Components like ``light``, ``switch``, ``fan`` and ``globals`` can restore their state upon
boot.
However, by default this data is stored in the "RTC memory" section of the ESP8266s. This memory
is cleared when the ESP8266 is disconnected from power. So by default the state cannot be recovered
after power loss.
To still have these components restore their state upon power loss the state can additionally be
saved in *flash* memory by setting this option to ``true``.
Beware: The flash has a limited number of write cycles (usually around 100 000), after that
the flash section will fail. So do not use this option when you have components that update rapidly.
These include GPIO switches that are used internally (disable restoring with the ``restore_mode`` option),
certain light effects like ``random`` and the ``on_value_range`` trigger.
2019-02-16 23:25:23 +01:00
.. _esphome-on_boot:
2018-06-07 17:07:02 +02:00
``on_boot``
2018-08-24 22:44:01 +02:00
-----------
2018-06-07 17:07:02 +02:00
This automation will be triggered when the ESP boots up. By default, it is executed after everything else
is already set up. You can however change this using the ``priority`` parameter.
.. code-block:: yaml
2018-06-07 17:07:02 +02:00
2019-02-16 23:25:23 +01:00
esphome:
2018-06-07 17:07:02 +02:00
# ...
on_boot:
priority: -10
# ...
then:
2018-11-10 14:31:27 +01:00
- switch.turn_off: switch_1
2018-06-07 17:07:02 +02:00
Configuration variables:
- **priority** (*Optional*, float): The priority to execute your custom initialization code. A higher value
2020-05-10 21:27:59 +02:00
means a high priority and thus also your code being executed earlier. Please note this is an ESPhome-internal
value and any change will not be marked as a breaking change. Defaults to ``-10``. Priorities (you can use any value between them too):
2018-06-07 17:07:02 +02:00
- ``800.0``: This is where all hardware initialization of vital components is executed. For example setting switches
2018-06-07 17:07:02 +02:00
to their initial state.
- ``600.0``: This is where most sensors are set up.
- ``250.0``: At this priority, WiFi is initialized.
- ``200.0``: Network connections like MQTT/native API are set up at this priority.
- ``-100.0``: At this priority, pretty much everything should already be initialized.
2018-06-07 17:07:02 +02:00
- See :ref:`Automation <automation>`.
2019-02-16 23:25:23 +01:00
.. _esphome-on_shutdown:
2018-06-07 17:07:02 +02:00
``on_shutdown``
2018-08-24 22:44:01 +02:00
---------------
2018-06-07 17:07:02 +02:00
This automation will be triggered when the ESP is about to shut down. Shutting down is usually caused by
too many WiFi/MQTT connection attempts, Over-The-Air updates being applied or through the :doc:`deep_sleep`.
.. note::
It's not guaranteed that all components are in a connected state when this automation is triggered. For
example, the MQTT client may have already disconnected.
.. code-block:: yaml
2018-06-07 17:07:02 +02:00
2019-02-16 23:25:23 +01:00
esphome:
2018-06-07 17:07:02 +02:00
# ...
on_shutdown:
then:
2018-11-10 14:31:27 +01:00
- switch.turn_off: switch_1
2018-06-07 17:07:02 +02:00
Configuration variables: See :ref:`Automation <automation>`.
2019-02-16 23:25:23 +01:00
.. _esphome-on_loop:
2018-09-23 19:00:31 +02:00
``on_loop``
-----------
This automation will be triggered on every ``loop()`` iteration (usually around every 16 milliseconds).
.. code-block:: yaml
2018-09-23 19:00:31 +02:00
2019-02-16 23:25:23 +01:00
esphome:
2018-09-23 19:00:31 +02:00
# ...
on_loop:
then:
# do something
2019-02-16 23:25:23 +01:00
.. _esphome-platformio_options:
2019-01-06 18:56:14 +01:00
``platformio_options``
----------------------
2020-05-10 21:27:59 +02:00
PlatformIO supports a number of options in its ``platformio.ini`` file. With the ``platformio_options``
parameter you can tell ESPHome what options to pass into the ``env`` section of the PlatformIO file
2019-01-06 18:56:14 +01:00
(Note you can also do this by editing the ``platformio.ini`` file manually).
2020-05-10 21:27:59 +02:00
You can view a full list of PlatformIO options here: https://docs.platformio.org/en/latest/projectconf/section_env.html
2019-01-06 18:56:14 +01:00
.. code-block:: yaml
# Example configuration entry
2019-02-16 23:25:23 +01:00
esphome:
2019-01-06 18:56:14 +01:00
# ...
platformio_options:
upload_speed: 115200
board_build.f_flash: 80000000L
2019-05-29 19:28:30 +02:00
.. _esphome-includes:
``includes``
------------
2020-05-10 21:27:59 +02:00
With ``includes`` you can include source files in the generated PlatformIO project.
2019-05-29 19:28:30 +02:00
All files declared with this option are copied to the project each time it is compiled.
2020-05-10 21:27:59 +02:00
You can always look at the generated PlatformIO project (``<CONFIG_DIR>/<NODENAME>``) to see what
2019-05-29 19:28:30 +02:00
is happening - and if you want you can even copy the include files directly into the ``src/`` folder.
The ``includes`` option is only a helper option that does that for you.
.. code-block:: yaml
# Example configuration entry
esphome:
# ...
includes:
- my_switch.h
This option behaves differently depending on what the included file is pointing at:
- If the include string is pointing at a directory, the entire directory tree is copied over
to the src/ folder.
- If the include string is point at a header file (.h, .hpp, .tcc) - it is copied in the src/ folder
AND included in the main.cpp. This way the lambda code can access it.
2019-05-29 19:28:30 +02:00
2019-06-19 11:42:30 +02:00
.. _esphome-changing_node_name:
Changing ESPHome Node Name
--------------------------
Trying to change the name of a node or its address in the network?
You can do so with the ``use_address`` option of the :doc:`WiFi configuration <wifi>`.
Change the device name or address in your YAML to the new value and additionally
set ``use_address`` to point to the old address like so:
.. code-block:: yaml
# Step 1. Changing name from test8266 to kitchen
esphome:
name: kitchen
# ...
wifi:
# ...
use_address: test8266.local
Now upload the updated config to the device. As a second step, you now need to remove the
``use_address`` option from your configuration again so that subsequent uploads will work again
(otherwise it will try to upload to the old address).
.. code-block:: yaml
# Step 2
esphome:
name: kitchen
# ...
wifi:
# ...
# Remove or comment out use_address
# use_address: test8266.local
The same procedure can be done for changing the static IP of a device.
2018-06-03 12:50:44 +02:00
See Also
2018-08-24 22:44:01 +02:00
--------
2018-06-03 12:50:44 +02:00
- :ghedit:`Edit`