esphome-docs/components/climate/index.rst

131 lines
4.1 KiB
ReStructuredText
Raw Normal View History

2019-05-12 22:44:59 +02:00
Climate Component
=================
.. seo::
:description: Information about the base representation of all climate devices.
:image: folder-open.png
ESPHome has support for climate devices. Climate devices can represent different types of
hardware, but the defining factor is that climate devices have a settable target temperature
and can be put in different modes like HEAT, COOL, AUTO or OFF.
.. figure:: images/climate-ui.png
:align: center
:width: 60.0%
Climate Device UI in Home Assistant.
.. _config-climate:
Base Climate Configuration
--------------------------
All climate platforms in ESPHome inherit from the climate configuration schema.
.. code-block:: yaml
climate:
- platform: ...
visual:
min_temperature: 18 °C
max_temperature: 25 °C
temperature_step: 0.1 °C
Configuration variables:
- **visual** (*Optional*): Visual settings for the climate device - these do not
affect operation and are solely for controlling how the climate device shows up in the
frontend.
- **min_temperature** (*Optional*, float): The minimum temperature the climate device can reach.
Used to set the range of the frontend gauge.
- **max_temperature** (*Optional*, float): The maximum temperature the climate device can reach.
Used to set the range of the frontend gauge.
- **temperature_step** (*Optional*, float): The granularity with which the target temperature
can be controlled.
Advanced options:
- **internal** (*Optional*, boolean): Mark this component as internal. Internal components will
not be exposed to the frontend (like Home Assistant). Only specifying an ``id`` without
a ``name`` will implicitly set this to true.
- If MQTT enabled, all other options from :ref:`MQTT Component <config-mqtt-component>`.
Climate Automation
------------------
.. _climate-control_action:
``climate.control`` Action
**************************
This is an :ref:`Action <config-action>` for setting parameters for climate devices.
.. code-block:: yaml
- climate.control:
id: my_climate
mode: AUTO
target_temperature: 25°C
Configuration variables:
- **id** (**Required**, :ref:`config-id`): The ID of the climate device to control.
- **mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Put the climate device
in a specific mode. One of ``OFF``, ``AUTO``, ``COOL`` and ``HEAT``.
- **target_temperature** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
target temperature of a climate device.
- **target_temperature_low** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
lower target temperature of a climate device with a two-point target temperature.
- **target_temperature_high** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
higher target temperature of a climate device with a two-point target temperature.
- **away** (*Optional*, boolean, :ref:`templatable <config-templatable>`): Set the away mode
of the climate device.
.. _climate-lambda_calls:
lambda calls
************
From :ref:`lambdas <config-lambda>`, you can call several methods on all binary sensors to do some
advanced stuff.
- Attributes: All climate devices have read-only attributes to get the current state of the device.
.. code-block:: yaml
// Current mode, type: ClimateMode (enum)
id(my_climate).mode
// Current temperature, type: float (degrees)
id(my_climate).current_temperature
// Target temperature, type: float (degrees)
id(my_climate).target_temperature
// Lower Target temperature, type: float (degrees)
id(my_climate).target_temperature_low
// High Target temperature, type: float (degrees)
id(my_climate).target_temperature_high
// Away mode, type: bool
id(my_climate).away
- ``.make_call``: Control the climate device
.. code-block:: yaml
auto call = id(my_climate).make_call();
call.set_mode("OFF");
// etc. see API reference
call.perform();
See Also
--------
- :apiref:`climate/climate.h`
- :ghedit:`Edit`
.. toctree::
:maxdepth: 1
:glob:
*