esphome-docs/esphomeyaml/components/ads1115.rst

ADS1115 Hub
===========

.. seo::
    :description: Instructions for setting up ADS1115 analog voltage multiplexer hubs.
    :image: ads1115.jpg
    :keywords: ADS1115

The ``ads1115`` domain creates a global hub so that you can later create
individual sensors using the :doc:`ADS1115 Sensor Platform </esphomeyaml/components/sensor/ads1115>`.
To use this hub, first setup the :ref:`I²C Bus <i2c>` and connect the sensor to the pins specified there.

.. figure:: sensor/images/ads1115-full.jpg
    :align: center
    :target: `Adafruit`_
    :width: 50.0%

    ADS1115 16-Bit ADC. Image by `Adafruit`_.

.. _Adafruit: https://www.adafruit.com/product/1085

.. code-block:: yaml

    ads1115:
      - address: 0x48

Configuration variables:
------------------------

- **address** (**Required**, int): The i²c address of the sensor.
  See :ref:`I²C Addresses <ads1115_i2c_addresses>` for more information.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID for this ADS1115 Hub. Use this if you
  want to use multiple ADS1115 hubs at once.

.. _ads1115_i2c_addresses:

I²C Addresses
-------------

In order to allow multiple sensors to be connected to the same i²c bus,
the creators of this sensor hardware have included some options to
change the i²c address.

-  If the address pin is pulled to GND, the address is ``0x48`` (Default).
-  If the address pin is pulled to VCC, the address is ``0x49``.
-  If the address pin is tied to SDA, the address is ``0x4a``.
-  If the address pin is tied to SCL, the address is ``0x4B``.

See Also
--------

- :doc:`sensor/ads1115`
- `i2cdevlib <https://github.com/jrowberg/i2cdevlib>`__ by `Jeff Rowberg <https://github.com/jrowberg>`__
- :doc:`API Reference </api/sensor/ads1115>`
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/ads1115.rst>`__

.. disqus::